Hello to the community, it is my first topic on XDA.
Perform a Port from a CM7 rom (Port) of Team Nexus Optimus Me and the Motorola Atrix CM7 nightly (base).
The port turned successful, the rom booting and works without problems, some minor bug repairable.
But the connection usb does not work, just load, but when I connect the usb, the phone does not show any usb connection and and the computer either.
Anyone know how to fix the usb connection?
greetings to all!: O: Confundido:
pablobonetti said:
Hello to the community, it is my first topic on XDA.
Perform a Port from a CM7 rom (Port) of Team Nexus Optimus Me and the Motorola Atrix CM7 nightly (base).
The port turned successful, the rom booting and works without problems, some minor bug repairable.
But the connection usb does not work, just load, but when I connect the usb, the phone does not show any usb connection and and the computer either.
Anyone know how to fix the usb connection?
greetings to all!: O: Confundido:
Click to expand...
Click to collapse
Do you have the right libs for the usb part?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Do you have the right libs for the usb part?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Actually I am new to this, is my first port. where I get these libs?
pablobonetti said:
Actually I am new to this, is my first port. where I get these libs?
Click to expand...
Click to collapse
Libs come from the ROM for your device. Did you build from ground up or did you use the copy/cut and paste method?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Libs come from the ROM for your device. Did you build from ground up or did you use the copy/cut and paste method?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
To carry just copy and paste files from one ROM to another. also used a bat file that ends porting the ROM and I believe the flashable zip.
pablobonetti said:
To carry just copy and paste files from one ROM to another. also used a bat file that ends porting the ROM and I believe the flashable zip.
Click to expand...
Click to collapse
ok, i'm not familiar with the bat file, but i do believe i saw something about a bat file somewhere.
i have limited experience in the world of porting. i build a rom from ground up for the dx (cm7) and had to port it to a working cm7 based off of the kernel configuration. i had copied all my files except lib, etc, bin, and xbin and brought it over to the already working rom. i zipped it up and flashed it and everything works. you could try doing that, but with your project to see if it works
Sent from my MB860 using xda app-developers app
Related
Everything seems to be working good except the small bug listed below. It is stock CWM and I haven't changed anything, just built it for our phones. Not sure what's up with the background as I haven't added anything?
Will flash CM9 without issues! I haven't had any flashing issues at all actually...
The .zip is CWM flashable, no fastboot needed. Enjoy!
Bugs-
Internal SD won't mount in usb storage mode.
(can still flash from internal)
Dropbox(Go easy)- http://db.tt/GvNBGK29
Mediafire- http://www.mediafire.com/?qzemoy3t86v761i
MD5- b819dcb34b48e97b3f9e2a7e6d665d0a
so im assuming this is the touch enabled version?
Flashed, its not the touch version. but everything looks to be in working order.
Only for cm7 and cm9?
or custom roms too?
mopss said:
Only for cm7 and cm9?
or custom roms too?
Click to expand...
Click to collapse
Try and find out. OP said it hasn't been completely tested yet.
Sent from my MB855 using Tapatalk
Try and find out.
Click to expand...
Click to collapse
I do not want,the му phone has only recently recovered from a brick
mopss said:
Only for cm7 and cm9?
or custom roms too?
Click to expand...
Click to collapse
Flashed jokercomplete, booted then flashed back to Initiative with no issues. The background image is nice. The menu disappears during flashing and the progress bar is hard to see (very thin and low contrast) which may make some people nervous.
I'll add it to the compendium and update the root-unlock-relock zip in the next day or so. Thanks yepitsme19.
Found a possible bug.Internal storage doesn't show up on windows computer when mounting "usb storage". Could somebody verify.
flashed on photon, works fine. I'll write if something is wrong.
http://forum.xda-developers.com/showthread.php?t=1493382
Rom Manager lets you flash CMW
Sent from my MB855 using xda premium
When you mount USB storage for access from Windows the internal SD is not mounting.
stesh725 said:
http://forum.xda-developers.com/showthread.php?t=1493382
Rom Manager lets you flash CMW
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
yea flash that version if u don't mind losing cm9 flashability
Lokifish Marz said:
Found a possible bug.Internal storage doesn't show up on windows computer when mounting "usb storage". Could somebody verify.
Click to expand...
Click to collapse
Added to OP. Working on a fix.
ranmasaotome510 said:
so im assuming this is the touch enabled version?
Flashed, its not the touch version. but everything looks to be in working order.
Click to expand...
Click to collapse
I wish I could say it was the touch recovery! But sadly, Koush hasn't released the source for it yet(If he even will)
yepitsme19 said:
Added to OP. Working on a fix.
Click to expand...
Click to collapse
check the kernel your using. make sure the ramdisk has the proper naming system for cwm
ranmasaotome510 said:
yea flash that version if u don't mind losing cm9 flashability
Click to expand...
Click to collapse
Oh ok.....yea I use cm7....cuz cm9 has a problem with Netflix and some of the other video playback problems
Sent from my MB855 using xda premium
wait, so we use ROM manager to flash ROM from SD card and select CWM 5.5.0.4 correct? I'm getting an error that isn't allowing me to "unable to open file"
CarbolDroid said:
wait, so we use ROM manager to flash ROM from SD card and select CWM 5.5.0.4 correct? I'm getting an error that isn't allowing me to "unable to open file"
Click to expand...
Click to collapse
I would just reboot to recovery and flash that way. I have always had issues using ROM Manager to flash, on every phone I've had.
Sent from my MB855 using xda premium
What's the benefit to using this version vs. Romracer's version??
ChadH42 said:
What's the benefit to using this version vs. Romracer's version??
Click to expand...
Click to collapse
Romracers recovery is modified, this is stock. Other than that? Just updated is all. I never told anyone to use it. Just putting something else on the plate, eat whatever the hell you want
Sent from my MB855 using xda premium
Still sad twrp stopped
And i miss amons rec that i used on the Evo...cwm always gave me issues on the EVO
Thx for the work
Sent from my MB855 using XDA App
lucidvtec said:
Still sad twrp stopped
And i miss amons rec that i used on the Evo...cwm always gave me issues on the EVO
Thx for the work
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I agree with all that you have said.
OK here ya go I tried to test these as best I could but as always USE AT YOUR OWN RISK. I would NAND Backup if I didn't want to have to reflash my ROM (like that was ever an issue).
This uses D.O.C. theme engine so they can be flashed on virtually ANY ROM.
Big thanks to Snuzzo as well THANKS
I tested them the best that I could.
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1656453
Credits:
meXdroidMod Team
Stale Bread
One thing you might need to adjust your animation speeds in /settings/Developer Options/Window Animation Scale & Transition Animation Scale.
Not much else to say other then ENJOY!
Don't forget to hit the Thanks button if you like..
Remember guys, these will not work with TWRP.
Snuzzo said:
Remember guys, these will not work with TWRP.
Click to expand...
Click to collapse
Is there a workaround for this, other than flashing another recovery? Maybe extract, copy, paste in file explorer?
Sent from my ADR6425LVW using xda app-developers app
haliwa04 said:
Is there a workaround for this, other than flashing another recovery? Maybe extract, copy, paste in file explorer?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Unfortunately none that i'm aware of.. other than to extract the ROM, open framework-res.apk (7zip) copy the XMLs from the attached zip into the apk.
haliwa04 said:
Is there a workaround for this, other than flashing another recovery? Maybe extract, copy, paste in file explorer?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Nope. No workaround. Also with vrtheme, if you want your old animations back, there is a folder created as "vrtheme-backup" on your sd card. These could potentially work on nearly any ICS rom.
zone23 said:
Unfortunately none that i'm aware of.. other than to extract the ROM, open framework-res.apk (7zip) copy the XMLs from the attached zip into the apk.
Click to expand...
Click to collapse
Snuzzo said:
Nope. No workaround. Also with vrtheme, if you want your old animations back, there is a folder created as "vrtheme-backup" on your sd card. These could potentially work on nearly any ICS rom.
Click to expand...
Click to collapse
Thanks guys, that sucks. Any idea why things are so finicky with the recoveries? My inc and tbolt were mules, that got raped and pillaged regularly with everything i could possibly think of, the x2 and rezound are stubborn and finicky, and put up one Hell of a fight with my crack flashing and constant amateur modding attempts
Sent from my ADR6425LVW using xda app-developers app
haliwa04 said:
Any idea why things are so finicky with the recoveries?
Click to expand...
Click to collapse
TWRP I **think** can't run busybox scripts.
This is FREAKING AWESOME!!!!! Flip is my favorite.
But I haven't tried any others.......
Twrps the only recovery that mounts my sd cards
Sent from my ADR6425LVW using xda premium
blestsol said:
Twrps the only recovery that mounts my sd cards
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
That means that something is really wrong.
blestsol said:
Twrps the only recovery that mounts my sd cards
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Which version of amon ra are you running?
Sent from my ADR6425LVW using xda app-developers app
Good work guys there sick. Question, is the stock transitions stock ICS or stock HTC?
mforminio7 said:
Good work guys there sick. Question, is the stock transitions stock ICS or stock HTC?
Click to expand...
Click to collapse
I'll check here in a few. I am going to be working a little on zone's themeing on the 8/10 builds in a bit so will need a fresh flash anyways.
-----------------------------------------------------------------------------------------------------------------------------------
They are stock HTC animations.
Snuzzo said:
Which version of amon ra are you running?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I was running 3.15
Sent from my ADR6425LVW using xda premium
I'm stuck at the HTC screen after flashing the FLIP animations on ConRom v6
Nic2112 said:
I'm stuck at the HTC screen after flashing the FLIP animations on ConRom v6
Click to expand...
Click to collapse
In recovery, check your SD card for vrtheme-backup. Were you using TWRP?
Snuzzo said:
In recovery, check your SD card for vrtheme-backup. Were you using TWRP?
Click to expand...
Click to collapse
I use AmonRa 3.15 and flashed VRThemes before so I'm not sure what went wrong.
There's a framework-res.apk in that folder and that's it.
I restored my backup, re-downloaded the file, flashed again, it says successful but my phone is still stuck at the HTC screen.
Nic2112 said:
I use AmonRa 3.15 and flashed VRThemes before so I'm not sure what went wrong.
There's a framework-res.apk in that folder and that's it.
I restored my backup, re-downloaded the file, flashed again, it says successful but my phone is still stuck at the HTC screen.
Click to expand...
Click to collapse
Guess that's one that might need pulled then. I'll test them all when I get back in front of my devving/building pc. At work right now. Expect an update tomorrow.
Sent from my ADR6425LVW using xda app-developers app
haliwa04 said:
Is there a workaround for this, other than flashing another recovery? Maybe extract, copy, paste in file explorer?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
only "work around" for it would be to extract the framework-res.apk from your system/framework directory.
place it on your pc, use 7zip to explore the apk with out opening it and drop the "anim" folder into the apk where the old one is.
then push apk back to phone.
synisterwolf said:
only "work around" for it would be to extract the framework-res.apk from your system/framework directory.
place it on your pc, use 7zip to explore the apk with out opening it and drop the "anim" folder into the apk where the old one is.
then push apk back to phone.
Click to expand...
Click to collapse
That's really not hard at all. I might have to include one of these in my next ROM.
Hi there. My name is Dave.
I am having trouble finding a correct place for this thread. This is the nearest place i could find for this topic. Q+A.
I am having some trouble with my htc desire c. I know there is not alot of development for this device as it is fairly new to market. however i had nameless rom installed (latest release) and all was well but last night i was trying to wipe back to stock rom. But things went badly. At first it didn't boot past the boot animation but now it doesn't even get that far. it stays on the warning about the build being for development purposes.
I can get into fastboot and it works. However my adb does not work. wont detect my device. drivers are installed correctly. Tried pushing via adb and fastboot. tried flashing via fastboot even booting the rom. i am using the first release of nameless rom when flashing to see if it will succeed. As far as i get is its starts writing the zip file etc but at the end says (remote: not allowed) FAILED.
I tried mounting my sdcard and placing the rom and installing via recovery but my sdcard wont mount on my pc. tried in another phone also. same thing
i have 2x2gb microsd cards and neither of them will mount
Any help would be greatly appreciated.
I have searched high and low across the internet to no avail
Why did ypu try to revert to stock rom? And did you try reflashing nameless 2.0.2? I have been using nameless since 1.1 and am now on 2.0.2 with stock rosie and systemui flashed.
Sent from my HTC Desire C using xda app-developers app
Thanks for your reply
SeannyM said:
Why did ypu try to revert to stock rom? And did you try reflashing nameless 2.0.2? I have been using nameless since 1.1 and am now on 2.0.2 with stock rosie and systemui flashed.
Sent from my HTC Desire C using xda app-developers app
Click to expand...
Click to collapse
I have it sorted finally. i borrowed (secretly) my mothers SIII and put in my sdcard and transferred the nameless rom through that way because my pc detected it
Recovery > Flash > Success!
Oh and in response to your previous question. I was returning to stock to unroot because i plan on selling my htc desire c. I bought a sidekick lx 2009 online. I live in Ireland but it works for phone and text. i bought it because I hate touchscreen keyboards i make too many mistakes and typos which frustrate me. My sidekick has a physical flipout keyboard (I have stubby thumbs) =[
Well Im glad you fixed it. Good luck on selling it!
Sent from my HTC Desire C using xda app-developers app
SeannyM said:
Well Im glad you fixed it. Good luck on selling it!
Sent from my HTC Desire C using xda app-developers app
Click to expand...
Click to collapse
Thank you Seanny
You're welcome
Sent from my HTC Desire C using xda app-developers app
Hi,
My daughter has the HP touchpad, I've already loaded CM7 using moboot method so she keeps webos. I can see now that many stable versions of CM9 exist and want to upgrade to one of the many ROMs available. Can I do this straight from clockwork mod or do I need to flash additional zip files in order for it to work properly. I have searched lots of forums and some are suggesting to use acme installer 2 but I have titanium backup so cannot see the point in this method. Any help is much appreciated.
Sent from my A500 using xda app-developers app
wemxm10 said:
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Err what's the question .
Q:can I upgrade to CM9 from CM7 through clockwork recovery?
A:don't remember where I saw it but I do remember that it could not flash properly and result in bugs....
So its best to do a clean install using ur PC and following this
http://www.webosnation.com/how-install-cyanogenmod-9-android-your-touchpad
Sent from my cm_tenderloin using xda app-developers app
Look for a video from reverend kyle on youtube, its a pretty good explanation and tells you the files you need. The CM9 build will be outdated in the video so just use the latest gapps and CM9 build. Everything else will be the same. Basically you'll need to use you computer and ACMEInstaller2. If you ever want to install CM10 you'll want to use ACMEInstaller3.
Many thanks for the responses, I will see how I get on.
Sent from my A500 using xda app-developers app
Might want to consider what was posted above, skip cm9, use acme uninstaller to start clean, then acmeinstaller3 and put one of the jellybean builds on.
JB takes up more system space, which acmeinstaller3 provides
Sent from my ThunderBolt using xda premium
I have taken the e975 international Optimus G official rom by avatar and ported it to our AT&T E970 until they make an official build for us. this rom is pretty bad. the theme options are much like Miui and they have many great features built into it.
Go to their website for the full low down on the rom and to request new features and themes and if you are a themer please make some of your themes available on their format.
Avatar Rom
I'll add the full details later tonight i'm in a rush for a BBQ and cold beer this afternoon but saw the avatar admin said i could post this port up and wanted to get it out to you all
I used our CM10.1 as a base so its using the cm10.1 kernel and any other kernel that ran on it should run on this but i have not tested it yet so beware and make backups
I used BANKS Gapps and have had no problem yet.
*****Known Issues****
- jb calling bug
- on initial install the external SD isn't recognized (I used the SD card fix from when codefire and others didn;t see the sd either. the link is below and i'm working on a permanent fix this week
-a few of the about phone/rom info is wrong. i'm also fixing this later this week
**Install Instructions**
1) Download the rom, gapps, and SD card fix from below and place them at the root of your SD card
2) Boot into CW and make a nandroid. i also recomened using Titanium to backup your apps
3) Wipe dalvik cache, system and do a full data wipe as well
4) Select Install zip and choose the rom file
5) Install Gapps if you wish
6) Install the SD card fix
7) Reboot into the ROM and let it boot up
8) boot into CW and restore your data if you so desire.
-------Downloads----------
Avatar 2.12b
Banks GAPPS
SD Card Fix - thanks HMkX2
Thanks for the effort, brother! Much appreciated. Have a few cold ones for me at the bbq! :beer::thumbup:
Sent from my Optimus G using xda app-developers app
Thanks for keeping the O.G. OG ROM scene kicking!
I'm about due to try another ROM this week....
Awesome! Gonna try now!
Sent from my LG-E970 using xda premium
looks unique to me! I'll be trying this out over the next few days. Will report back with battery life and so forth. Anyone able to try out our kernels to see if any of them are compatible?
OMG I've Been Waiting For This ROM Ever Since I Stumbled Upon On The e975 Forums. Thanks!!
OK which file do u flash to fix ext SD card there are like 5 files on that Link... All or a certain one..... Thanks in advance
Sent from my LG-E970 using xda app-developers app
Google restore
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
86nymets said:
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
Click to expand...
Click to collapse
Did u install gapps?
Sent from my Optimus G using xda app-developers app
Couldn't get exsd to show up installed fix....?
Sent from my LG-E970 using xda app-developers app
86nymets said:
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
Click to expand...
Click to collapse
I've seen this happen on ROMs before. Don't remember which one, but I have seen it. May be from my n4 conversion days...
Sent from my Nexus G using Tapatalk 2
Do you need to have the ota jb update to flash this ROM?
gerg6986 said:
Do you need to have the ota jb update to flash this ROM?
Click to expand...
Click to collapse
yes
icytrey said:
Did u install gapps?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Yes I did.
I can't seem to get SD to work . . . ? Anyone have any directions on how to do this? There are different files and methods it seems
I ditto the fellow above me here. I have tried to follow that guide and I can see my SD card in file manager. But in system > storage there is only internal recognised. No option for SD/external/added memory. Kinda want to see my giant gallery from my 64gb/32gb cards.
Sent from my LG-E970 using xda app-developers app
This sounds wonderful, will try this weekend
Sent from my LG-E970 using xda premium
what happened? Anything new on this rom? Really liked a lot of the features, but need the bugs ironed out. Not upset, just checking in is all
Just messed around with this rom on my Galaxy S 2 and I gotta say . . . I would LOVE to get this up an running. Here's hoping you keep up the fixes.
Any plans on updating to newest version of the rom? Or is this one dead?
Sent from my Galaxy Nexus using xda premium