Related
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
iLLumiShield - PET Film - Front & Back - $13.95
"...perfect fit. Almost too close so you have to be pretty precise putting it on. Front and back. I've also been using a pen with it and no scratches except when my pen had a metal burr on it."
-----------------------------------------------------------------------------------------------------
eBay "Explosion Proof" - 0.4mm Tempered Glass - Front - $10.95
"It feels nice when you put it on...I like the feel of it better than the normal screen. It was hard to install well for me but probably not as hard as I made it out to be. I had it perfect but removed it to get the thing from under it out and that is where things went wrong."
-----------------------------------------------------------------------------------------------------
Armorz Stealth Extreme R - 0.4mm Tempered Glass - Front - $49.95
"...a bit on the pricey side but i love it."
-----------------------------------------------------------------------------------------------------
Glass-M Premium - ???mm Tempered Glass - Front & Back (single pieces available) - $31.50
"I have Glass-M front+back for mine and I absolutely love it. (Removed factory ASF as well). My notes
* It is really smooth. Like freshly made toffee it is so smooth it feels faintly greasy (but it is not). On an almost completely flat table the phone will slowly slide across the surface by itself due to a slope you can't see (be careful)
* I believe touch sensitivity is improved. Finicky DPI sliders in Paranoid Android setups give me no trouble now - before jumping 239,243,241 when I really want 240 dpi exactly. Pencil also works perfectly as a stylus.
* I believe screen brightness and clarity are improved. Subjective and probably due to removal of the ASF (and its invisible tiny scratches)
* Extra glass makes the phone a bit thicker but also much stiffer and I liked this. I also have a Z1 and I miss how solid that phone felt in my hand. Ultra always felt a bit too flimsy (bendy). I also had to widen the slot on my DK30 (sandpaper glued to a flat stick aka big emory board)
* Getting alignment correct is tricky - glass-M slightly smaller than the phone screen edges. Mine went on crooked but I can live with that.
* No dust or bubbles in mine. Used the shower trick of old school film photographers. Long hot steamy shower will effectively clean the room of even tiny dust particles.
* Removing the ASF is a truly harrowing experience (see the other thread). Halfway through you *will* have an "Oh God what have I done" moment. Still totally worth it.
Hope my ramble helps someone. In summary really happy with the Glass-M."
Hey guys,
I'm getting to the point where I'm looking for a high quality, preferably tempered glass, screen protector. My ASF is getting more and more ****ed up day by day (I'm starting to see how bad it really is). I've done some research and found the screen protectors that appear early on in google's search results and through various XDA threads, but I'm curious what other people are using/have used.
I've decided to put this thread together so there can be a repository for screen protector information. This way people who want to protect their ZU from day 1 or those who are going to remove the ASF and cover the phone with something else can have a centralized place to get the information they need.
If you don't mind, please reply to this thread with information regarding the screen protector you are currently using or have used, what kind it is (PET, tempered glass, other), price, the link to purchase it, pictures (if possible), and what you thought of it/if you recommend it.
I'll update the thread (post 2) with the information as it comes in. Hopefully this can help everyone.
I am so tempted to get these front and back
http://www.amazon.co.uk/FX-Antirefl...ords=Sony+z+ultra+front+back+screen+protector
jutley said:
I am so tempted to get these front and back
http://www.amazon.co.uk/FX-Antirefl...ords=Sony+z+ultra+front+back+screen+protector
Click to expand...
Click to collapse
Try it, let me know how it is.
Poi25 said:
Try it, let me know how it is.
Click to expand...
Click to collapse
Will do I have ordered it will give some feedback on it.
Anyone know a good dry screen protector? The one that came with the spigen hybrid case I got for my n5 is great. Wish I could get the same for my soon to be xzu.
jacktrck said:
Anyone know a good dry screen protector? The one that came with the spigen hybrid case I got for my n5 is great. Wish I could get the same for my soon to be xzu.
Click to expand...
Click to collapse
As you can see, I'm trying to build this thread. There's not really much info yet.
I've got a Skinomi protector for XZU, haven't applied it yet ... not sure what the advantages or downsides are of removing the ASF ATM. I'll prolly apply it tomorrow though.
diji1 said:
I've got a Skinomi protector for XZU, haven't applied it yet ... not sure what the advantages or downsides are of removing the ASF ATM. I'll prolly apply it tomorrow though.
Click to expand...
Click to collapse
I'd personally remove the ASF, I don't like it. But then again, I haven't removed mine yet cuz it's a PITA. Let me know what you think of the protector, post some pics, etc.
Poi25 said:
I'd personally remove the ASF, I don't like it. But then again, I haven't removed mine yet cuz it's a PITA. Let me know what you think of the protector, post some pics, etc.
Click to expand...
Click to collapse
How can you tell if you would prefer to not have the ASF if you haven't removed it? Given the seemingly widespread issue of XZU breaking I'd be pretty leery of removing the ASF unless a very sturdy case was going on. I was tempted to try out a product from Armorz which I think was called Tech R(?) - it's 2 tempered glass pieces for back and front - but Iwasn't sure how much support this would give against twisting.
I'm intending to put on the Skinomi Techskin tonight before I go to bed as it's recommended to leave it for 5 hours or so to dry.
diji1 said:
How can you tell if you would prefer to not have the ASF if you haven't removed it? Given the seemingly widespread issue of XZU breaking I'd be pretty leery of removing the ASF unless a very sturdy case was going on. I was tempted to try out a product from Armorz which I think was called Tech R(?) - it's 2 tempered glass pieces for back and front - but Iwasn't sure how much support this would give against twisting.
I'm intending to put on the Skinomi Techskin tonight before I go to bed as it's recommended to leave it for 5 hours or so to dry.
Click to expand...
Click to collapse
I know I'd prefer the ASF removed because of how it looks. It's beat up and scratched, and I've babied this thing. Plus, it's plastic. Glass > Plastic. It's not going to be any less sturdy without the ASF. It's not like a tiny 0.4 mm piece of plastic is going to provide any sturdiness. All it does is contain the glass fragments from flying anywhere if the screen were to break.Underneath the ASF is normal smartphone glass (don't know if it's Gorilla Glass or another brand).
Putting a tempered glass protector on it would definitely make it more sturdy. That's the point, it's tempered.
diji1 said:
I've got a Skinomi protector for XZU, haven't applied it yet ... not sure what the advantages or downsides are of removing the ASF ATM. I'll prolly apply it tomorrow though.
Click to expand...
Click to collapse
Skinomi is garbage
avetny said:
Skinomi is garbage
Click to expand...
Click to collapse
Are you using a SGP protector on your ZU? You have a million links in your sig, so I was just wondering.
Poi25 said:
Are you using a SGP protector on your ZU? You have a million links in your sig, so I was just wondering.
Click to expand...
Click to collapse
Gearmaxx only.
jutley said:
I am so tempted to get these front and back
http://www.amazon.co.uk/FX-Antirefl...ords=Sony+z+ultra+front+back+screen+protector
Click to expand...
Click to collapse
Atfolix is pretty decent quality. Just switched today.from.anti reflex to crystal clear. Anti reflex is nice when being outside in the sun, but it really weakens the quality of the screen,it looks quite blurry. And what is most annoying... Using pens and stuff on the anti reflex protector will basically lead to drawing on the screen protector.
Crystal clear is perfect.wouldn't notice it's there at all.
I've used atfolix on all of my phones and never had any problems. Very easy to apply, very scratch resistant.
Sent from my C6833 using XDA Free mobile app
So I put the Skinomi Techskin on. I have since removed it.
Impressions were thus: Applying the protector is simply a matter of misting the adhesive side of the film (liquid is supplied, I believe it's just water and surfactant), applying it to the device and waiting.
As far as optics goes I could not tell the difference between viewing the screen with it off or on the device after it had "cured" (Skinomi's word). Touching it felt like touching a layer of soft rubber that had a tiny bit of grip. I found it didn't impede me in any way but I prefer the feel of other screen protectors and of course no screen protector.
I had to remove it in any case as I got a speck of something underneath it that I couldn't remove but I think I would've removed it in any case due to the feel of it.
diji1 said:
So I put the Skinomi Techskin on. I have since removed it.
Impressions were thus: Applying the protector is simply a matter of misting the adhesive side of the film (liquid is supplied, I believe it's just water and surfactant), applying it to the device and waiting.
As far as optics goes I could not tell the difference between viewing the screen with it off or on the device after it had "cured" (Skinomi's word). Touching it felt like touching a layer of soft rubber that had a tiny bit of grip. I found it didn't impede me in any way but I prefer the feel of other screen protectors and of course no screen protector.
I had to remove it in any case as I got a speck of something underneath it that I couldn't remove but I think I would've removed it in any case due to the feel of it.
Click to expand...
Click to collapse
Could you answer the few questions from the OP and post some pics? That way I can add this as the first one.
I've been using illumishield.
http://www.amazon.com/gp/aw/d/B00EOC6CM0?pc_redir=1400194879&robot_redir=1
It's PET and perfect fit. Almost too close so you have to be pretty precise putting it on. Front and back. I've also been using a pen with it and no scratches except when my pen had a metal burr on it.
Sent from my C6806_GPe using Tapatalk
In about a month I'll come back and leave some details on the protector I just ordered off E-bay. Set me back $24, and goes by the name "Glass-M Curvy Border Tempered Glass Screen Protector".
I'm weary of E-bay and all it's anonymous vendors - but MIME/Ghost was out of stock and Bodyguardz doesn't have a glass protector for our device so E-bay it was!
Chima2 said:
In about a month I'll come back and leave some details on the protector I just ordered off E-bay. Set me back $24, and goes by the name "Glass-M Curvy Border Tempered Glass Screen Protector".
I'm weary of E-bay and all it's anonymous vendors - but MIME/Ghost was out of stock and Bodyguardz doesn't have a glass protector for our device so E-bay it was!
Click to expand...
Click to collapse
Great choice - I think you'll be pleased with it!
There are some experiences with it and other protectors posted in these threads:
http://forum.xda-developers.com/showthread.php?t=2571471
http://forum.xda-developers.com/showthread.php?t=2609371
Here's what I posted back in March:
I applied Glass-M screen protectors on both the front and back of my phone yesterday, and have been very happy with it so far. It's added a little weight, but it feels sturdier and more premium than before, and looks better than the plastic screen protector I had previously. The touch is also a lot smoother than the plastic one, which was a bit rubbery. I installed mine on top of the ASF, both front and back, since I didn't want the "harrowing" experience of removing it. I feel like it's protected well enough to do without a case, though I may get a slim one to cover the edges of the phone as well. Highly recommended. :good:
Click to expand...
Click to collapse
I haven't changed my mind, and also got a Muvit Bimat case, which has been a perfect combination. It still looks new.
I find that the (plastic) screen guard that's provided with this phone is a major smudge magnet. I'm thinking of removing it. I'd like any feedback from anyone who has already taken it off.
Cheers.
UPDATE: I went ahead and got 9H Glass cover. 2-pack for $8 on Amazon. Immensely better than the plastic this phone ships with. I highly recommend doing this, even if you don't personally see a problem with the plastic cover. I promise once you see the difference you'll agree it was worth it.
So happy I posted this question.
Thank you all for your responses!
There doesn't seem to be an oleophobic coating on the display because they expect you to keep the screen protector on. So taking it off might result in even more smudges. Personally, I didn't find the screen protector that came pre-installed to be a smudge magnet. I actually found that it reduced them. I'm not saying the protector necessarily has an oleophobic coating, but that I didn't have a problem with smudges on it. The only reason why I took mine off was because there was some black dust underneath the screen protector and I couldn't get it back on without more dust appearing under it. So I just removed it completely. You might have to buy another screen protector of your choice that will better repel smudges to your satisfaction.
I've taken mine off because I scratched mine with a paper towel (like wtf?) but now I wish I haven't, because things stick to the screen easier. So unless you have an alternate screen protector ready, I'd recommend not.
NexusHeat said:
There doesn't seem to be an oleophobic coating on the display because they expect you to keep the screen protector on.
Click to expand...
Click to collapse
Thanks. This is information I didn't have. I have a couple of other devices with no plastic cover; I don't have the smudge issue with them. But if there's no coating on the h5, then it's probably best to keep it on.
Buy a tempered glass protection, that's cheap and protect very well the screen (ebay, amazon, aliexpress bangood, etc....) keywords : phone name + "tempered glass" or "9h"
mooms said:
Buy a tempered glass protection, that's cheap and protect very well the screen (ebay, amazon, aliexpress bangood, etc....) keywords : phone name + "tempered glass" or "9h"
Click to expand...
Click to collapse
Had various of those. All broke either in my pocket or by a slightdrop (dropping it on the table from like 4cms high. It doesnt protect against smudges very well. Got a plastic matt screenprotector. Tempered glass is a waste of you money in my opinnion.
Demian3112 said:
Had various of those. All broke either in my pocket or by a slightdrop (dropping it on the table from like 4cms high. It doesnt protect against smudges very well. Got a plastic matt screenprotector. Tempered glass is a waste of you money in my opinnion.
Click to expand...
Click to collapse
Have various myself, only broken one, on a tablet.
Plastic is not the same feel as glass on the fingers (don't know how to explain it better in english), and it scratch must faster.
mooms said:
Have various myself, only broken one, on a tablet.
Plastic is not the same feel as glass on the fingers (don't know how to explain it better in english), and it scratch must faster.
Click to expand...
Click to collapse
Which one did you have? I had the one from nillkin 9h. Scratched in my pocket and cracks began with the slightest drop. But yeah plastic is diffrent then glass..
Demian3112 said:
Which one did you have? I had the one from nillkin 9h. Scratched in my pocket and cracks began with the slightest drop. But yeah plastic is diffrent then glass..
Click to expand...
Click to collapse
Bought a generic 9H on eBay for 1€
I also have a transparent silicone case for the same price
I also bought the Nillkin 9H, but the other is still good so....
I took my plastic screen protector off the moment I got my tempered glass screen protector. Couldn't really remember how the original one felt since I only had for a very short period of time. That said, I recommend taking screen protector off for something better.
The stock screen protector is trash, all it does is act as a fingerprint magnet.
I did go to a Nillkin 9H. Wow - 90% reduction in smudges, and it is more sensitive than the stock plastic. Dropped the phone a few times, no issues. I do have an iPacky thin case, and it shows the abuse of daily use, but survives fine. It is also very thin. The thick cases defeat the whole purpose of our slim beauty.
I found that replacing the factory plastic screen protector with a high quality glass screen protector makes it a little better in terms of less fingerprint smudges and protection.
Oscar_david said:
I find that the (plastic) screen guard that's provided with this phone is a major smudge magnet. I'm thinking of removing it. I'd like any feedback from anyone who has already taken it off.
Cheers.
Click to expand...
Click to collapse
i took it off and you get some scratches but not allot. if you look at the jerryrigs video he tested it and its as strong as gorilla glas. So you can take it off. i took mine off because there was a huge scratch in my screen protector and i could not live with that.
Cheers:good:
Oscar_david said:
I find that the (plastic) screen guard that's provided with this phone is a major smudge magnet. I'm thinking of removing it. I'd like any feedback from anyone who has already taken it off.
Cheers.
Click to expand...
Click to collapse
I would wait to get a tempered glass, just to prevent any scratches on the LCD
** *** **
I have literally never used any screen protector and have never had issues. However, YMMV. I immediately took off the screen protector that came with it. I did buy a nice cheap protective case from Amazon prime. It has enough lip to protect the screen and I always make sure not to put my phone in the same pocket as my keys or sharp items.
using honor 5x without screen protector since months, no scratch at all.
bt the back side got a couple of scratches from my bike keys
UPDATE: I went ahead and got 9H Glass cover. 2-pack for $8 on Amazon. Immensely better than the plastic this phone ships with. I highly recommend doing this, even if you don't personally see a problem with the plastic cover. I promise once you see the difference you'll agree it was worth it.
So happy I posted this question.
Thank you all for your responses!
Oscar_david said:
UPDATE: I went ahead and got 9H Glass cover. 2-pack for $8 on Amazon. Immensely better than the plastic this phone ships with. I highly recommend doing this, even if you don't personally see a problem with the plastic cover. I promise once you see the difference you'll agree it was worth it.
So happy I posted this question.
Thank you all for your responses!
Click to expand...
Click to collapse
Great.
I removed mine last night, can't believe how much better the display looks without it.
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
JimBird Tempered Glass Screen Protector Front + Back + Camera Lens Protector For Galaxy S8 Plus S8+ 9H Anti-Scratch Anti-Fingerprint https://www.amazon.com/dp/B073S4YZW1/ref=cm_sw_r_cp_apa_MohHzbHWHA99A
Mr. Orange 645 said:
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
Click to expand...
Click to collapse
I was thinking about the same thing, this post is very helpful.
Mr Orange, I am thinking on the same lines as you were. Did you end up buying the JimBird TGSP? If so, what are your opinions of it and how well did it work for you? It seems like something simple to offer, but so hard to find. Thanks!