Related
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Kies should install the drivers when you plug it in. But during flashing, you need to close kies.
It's not the issue. Drivers are work correctly because other phone is detected. Kies is close.
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
The problem started with 2 & 5 .
You probably flashed a new stock firmware , which caused root functionality to disappear .
In number 4 , fix permissions should only be used if a few system apps keeps force closing
In number 6 , factory reset isn't needed unless absolutely necessary
I'd recommend you to go to www.sammobile.com and download the firmware that you were using
Then flash it with ODIN
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
azdanowski said:
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
Click to expand...
Click to collapse
It should detect your phone
Try ending all Kies processes by using Task Manager
Sent from my GT-S5830 using XDA App
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
this is your problem. Uninstall your phone in Device Manager and install it properly by downloading the standalone USB driver for S5830. Google for it. This happened to me on Win XP. On Win 7, the native/vanilla USB drivers worked fine.
my i9100G cant transfer file to my pc.. when i connect the usb, my computer said fail to install and cant do anything about it.. i even tried open kies also cant detect the phone.. i did everything like untick/tick usb debug.. and my phone is DZKJ2 firmware 2.3.6.. any solution? before this i tried to root my phone but i mess something up so i quited it.. is this the cause for this problem?
Try installing the latest samsung kies available. It will come with the required drivers. What OS are you using ?
bala_gamer said:
Try installing the latest samsung kies available. It will come with the required drivers. What OS are you using ?
Click to expand...
Click to collapse
i'm using window 7..
You said that you tried to root but quit.Hope you didnt try to root with a i9100 kernel on your i9100G cos i dont think they are compatible.Re-install the latest version of kies and if that doesnt work then re-flash your firmware and try again.
well... I have this problem before, me just trying using other port the problem was sloved... (tips: do you unlock you phone before connet to pc?)
Other answer from other forum
Fist:
I) restart you pc,
II) on you kies
III) turn off you phone
IV) connect to pc
V) got driver now?
if still cannot.. try
a) wipe data and cache on recovery mode,reboot and try connet to pc agian. (warning: make sure backup you phone fist)
Hope this will helping you xD
by the way.. i did tried to root my phone.. but end up failed.. so i cant do stuff like flashing.. those rooting step for is was too hard for me to understood..
To fix this problem (Your Windows 7 PC Not recognizing your Galaxy S2)
1: Try another USB Cable (my original cable doesn't work, a generic one I had does)
2: My Computer Properties - Device Manager - Uninstall EVERYTHING from the Universal Serial Bus controllers list, then restart. - This fixed the issue for me, my external keyboard and mouse stopped working but I'm using a laptop and once I restarted everything works fine
3: Update your phone's baseband radio (I was on XXKI1 and my PC would only recognize my phone when I was using VillainROM, nothing else, until I updated the radio to XXKI4).
jamesyb0i said:
To fix this problem (Your Windows 7 PC Not recognizing your Galaxy S2)
1: Try another USB Cable (my original cable doesn't work, a generic one I had does)
2: My Computer Properties - Device Manager - Uninstall EVERYTHING from the Universal Serial Bus controllers list, then restart. - This fixed the issue for me, my external keyboard and mouse stopped working but I'm using a laptop and once I restarted everything works fine
3: Update your phone's baseband radio (I was on XXKI1 and my PC would only recognize my phone when I was using VillainROM, nothing else, until I updated the radio to XXKI4).
Click to expand...
Click to collapse
tried too but isn't really working..
What root method did you try?
I think you can try by type
*#9090# and select "via UART"
then type
*#7284# and select "UART MODEM" and "USB PDA"
Connect your USB cable and it will auto download the new driver to your computer.
p/s: Need internet connection
sorry all.. finally fix the usb thingy.. i think the problem started with the update i download from samsung.. after i download the DZKJ2 firmware.. my pc unable to detect my phone.. now i switched back to DZKJ1 firmware and now its fixed.. though some function may lost but better than nothing.. thanks for your answer too
AndroidS2 said:
I think you can try by type
*#9090# and select "via UART"
then type
*#7284# and select "UART MODEM" and "USB PDA"
Connect your USB cable and it will auto download the new driver to your computer.
p/s: Need internet connection
Click to expand...
Click to collapse
thanks..ur guide is awesome. works like charm 4 me. no need to downgrade to kj1..flawlessly!
mr.haqeem said:
thanks..ur guide is awesome. works like charm 4 me. no need to downgrade to kj1..flawlessly!
Click to expand...
Click to collapse
still not work for me...
Do a factory reset through privacy option in settings.It will solve usb detection issues completely.I suffered same problem and solved by factory reset. Hope this helps those with similar experiences
Hello All,
i had a problem with my phone every time plugging in galaxy s3 into windows (xp or 7) i kept getting no hardware id found after flashing my last rom.
just thought i would share how i resolve. very simple steps...
power off and remove battery
uninstall any drivers from windows
insert battery
power on device
once fully booted plug device back into windows and let it search for drivers.
all "should" now be working.
just thought it would be helpful to share as took me a while to find information online.
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
JJEgan said:
Standard instructions are to use Samsung cable and a USB port on the motherboard .
jje
Click to expand...
Click to collapse
jups, tried several cables and all of my usb-ports. Still no marriage between phone and desktop
funnily enough i just had this happen to me on my win 7 64bit ultimate, havent flashed any new roms just stock with cf root. All of a sudden my comp gave the sound effect if something was disconnected and I just got hardware id missing.
It did resolve itself though after I rebooted both phone and pc so unfortunately cant narrow it down further.
sandeman11 said:
Got the same problem, with the difference that my S3 is fresh out of the box. Installed kies, drivers. Tried all of the usb-ports but nothing seem to work.
Was looking to root it but the connection (looks to me) would be an must...
W7
64 bits
Click to expand...
Click to collapse
Is KIES loading while you are trying? If so, shut it down.
I've never had to load drivers. Windows always finds them on it's own.
missing hardware id (Win7 64 Home)
Same Problem for me.
I have never used Kies, but installed des Samsung Driver Package Ver. 1.5.6.0 .
For 3 month all worked fine with 2 Galaxy S III, 2 S II and 1 S I.
Since yesterday i have this trouble. Reinstall drivers, shut down phone... nothing helps. Changing USB-Ports, nothing...
Running on Stock XXBLG8 wird Syiha 1.5 or Speedmod K1-8 Kernel.
Would be fine if there is a fix or at least idea how to solve this
Just so everyone knows, the way i fixed this was very simple.
1. Uninstall Kies and All Drivers
2. Reboot Into Recovery (If Roooted)
3. Wipe Cache and Dalvik
4. Fix Permissions
5. Install LG8 Rom (rom installer from UpdateMe)
6. Reboot Phone
7. Disconnect From Internet (PC/MAC)
8. Re-Install Kies
9. Connect Phone to PC/MAC
10. Let Phone Install Drivers Again with Kies
11. Should Be Good-to-Go
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
I actually tried that and didnt work for me so i started from scratch as if the PC never connected with the phone before.
nexusino said:
1
-On Control Panel go to Programs and Features find Samsung mobile USB drivers and uninstall it, conect phone on PC via USB cable and wait for drivers to install.
or
2
-Use Kies and klik Troubleshoot problems with connectivity
That should solve the problem
Click to expand...
Click to collapse
this worked for me but i have to repeat the process every time in reconnect my phone to the pc
It works
Hi guys,
I think I figured it out.
I was reading posts about this issue on multiple forums and there was one that caught my attention (I cannot remember where it was exactly- it was late in the night).
The thing is that the current Windows running PC's (or most of them) does not have the latest drivers and updates installed.
First I tried connecting my Galaxy S3 to the PC (which was not updated) and had the same errors you guys have. Then I connected it to my home laptop and this did not work as well. Today when I went into the office (@work) i tried again there and it worked flawlessly. Then it hit me:
The IT dept keeps the laptops and all the infrastructure up to date (including Windows updates). Therefore I tried again at home but this time with Windows up to date and guess what...it worked on both PC and laptop !
What I did (please keep in mind that all of my laptops and PC's are running Windows 7 - not sure if it works on older Windows versions):
1) Uninstall Kies and the related USB driver it installs (Control panel -> Programs and features)
2) Let Windows install the latest updates (Control panel -> Windows Update) and let it reboot your machine and finish installing things.
3) After you're logged back into Windows just plug your USB cable into the phone and PC/Laptop on any of the USB ports and it works !
Hope this helps !
Regards,
Mike
wtf i update kies software, here the same problem. :crying::crying:
i reinstall Kies more then 3x, but the problem is exist!
i try other usb connection, same problem..
now when i connect my Galaxy S2, same prob.
and all that after i update Kies Software to 2.3.
Where can i found an older Version?
Greetings
---------- Post added at 10:34 PM ---------- Previous post was at 10:17 PM ----------
Samsung Composite Driver is exactly the Problem on Windows 7 X64!
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
i try it with only Windows Update Driver that was not the Solution, that was without ADB Support..
I resolve the Problem, :good: if anyone have the Problem further, try this..
- uninstall all Samsung Driver & Kies from your System
- then you need the tool USBDeview
- uninstall with that tool all unused or Samsung USB Driver from your Sys
- Reboot your Machine
- after that clean your registry (example with CCleaner)
- Reinstall or Update your Motherboard System Driver (Only USB)
- Reboot your Machine
- Install Now Samsung Kies again
- again Reboot your Machine
- and last disable USB Debugging on your Phone and activate it again
now you can plug your Device and hopefully with MTP and ADB Support and without Hardware ID Error.
Best Regards
This happened to me since I updated Kies. What works for me:
Go to settings -> more (under data usage) -> USB Utilities -> connect storage to PC -> OK
Windows now does recognise the phone and you can browse the phone as a drive. Kies will give you an error.
Turn off USB Storage, disconnect the phone.
Take out the USB cable and put it back in and Windows should detect the phone properly now and Kies will recognise it too.
this worked for me first time
Flashed rom, new error of mulfunctional USB and not recognized phone on USB. Interesting is, that another phone, but the same type, same ROM was recognized. Nothing from above helped (reinstalled progs, restarts, reinstalled ROM, tweeking in kies)
Helped only reinstalled drivers posted above by gee2012 (SAMSUNG_USB_Driver_for_Mobile_Phones)! Thanks for this.
gee2012 said:
I installed these drivers SAMSUNG_USB_Driver_for_Mobile_Phones and this solved my problems with the ID issue. Here is the link https://www.dropbox.com/s/fm9b12xy3r0t07b/SAMSUNG_USB_Driver_for_Mobile_Phones.zip. Good luck guys
Click to expand...
Click to collapse
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
had this happen again after flashing a new rom from a full wipe. un installed the drivers then reconnected and fixed the issue.
Zrbyte said:
Big thanks, these drivers sorted it out for me though the ones you hosted have gone from your dropbox I found more easy enough because of the name you supplied.
Just out of interest are those having this problem using an AMD chipset or a gigabyte motherboard? My main PC has both and its the only system I am having this issue with.
Click to expand...
Click to collapse
Funnily enough yes, I am using a FX-6100 and a GIGABYTE GA-970-DS3
So i want to install a custom ROM on my device (Galaxy S3 i9300), and when i try to connect my S3 to my Laptop using USB cable, it said that Driver was not successfully installed, i tried so many ways that i found on the internet like reinstall the drivers, trough regedit. But, still not fixed. Anyone can help?:crying:
Download this file SAMSUNG_USB_Driver_for_Mobile_Phones :-
http://developer.samsung.com/technical-doc/view.do?v=T000000117#none
@Mizute Your charging socket has hardware problem !!
I own an amazfit pace smartwatch,bought 2 weeks ago.When i connect it with my PC and laptop(windows 10 & 7) via usb cable they don't recognize it as hard disk in order to see watch folders and import some music following the correct instructions.I hear the characteristc sound when i connect usb.When i browse to device manager i notice that in windows 10 there is no problem with drivers but in windows 7 there are drivers missing.I try to use the download online function but with no result.I feel that is a very simple problem but i am very frustrated because i can't find any solution.Also i am really impressed that it isn't reported such a problem in your great forum,or i didn't notice it browsing the threads.Thank you in advance for your help!!!
Did you tried with restarting watch? Or maybe hard reset of watch? Try also another USB cable.
have same problem, try every pc, new and old windows .. one of the solution i clean the contact point behind the watch, is blocked with our dead skin
I face the same problem, I uninstall the driver from the device manager and re-plug again, now it can detect now.
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
I solved my problem. When you connect amazfit it will appear in devices and printers. When you right click it and open properties (somewhere there) you can change the driver from google nexus adb interface to USB composite device. Then It will appear as disk in my computer.
onisimos said:
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
Click to expand...
Click to collapse
Mine working on Windows 10, detected as MTP device. I do have ADB universal drivers installed but it also works on my Win 8 laptop with no additional drivers installed.
I'm suffering the same problem after many changes of rom and music uploading in the last months. Now the watch is not recognized (unknown device error 43) under 3 w10 PCs, different cables and usb ports. Cleaned contatcs and charging properly but no way to connect with the PC. Desperated...
Any help or piece of advice are welcome
onisimos said:
i used new usb cable--> problem remains
i restarted watch-->problem remains
i cleaned the contact point-->problem remains
i uninstalled the driver(windows 10) and reinstalled it-->problem remains
i uninstalled the driver(windows 7) and reinstalled it-->PROBLEM SOLVED
But my main PC runs windows 10.There must be a simple solution...
the last solution so far is the hard reset.I will inform you when i try it..
Click to expand...
Click to collapse
Could you please share the driver link by any chance? .....I couldn't find one ...as I saw from internet I need something like MTP driver...tho all the things are done manually .. so complicated..im using win10 64bit as well, a surface pro4 and my amazfit rom is 1.3.4f thank you!
Windows 10 comes with the MTP driver, so that is not the problem.
I have seen it numerous times that the watch charges but it doesn't get a pc connection.
It is always connected to a bad contact on the back.
Either you have to clean the contacts better or your dock is not working reliable.
A co worker of mine had that and he tried my dock and it worked, so he ordered a cheap one ( not that "bridge" thing ) from ali.
Working since then.
Problem solved
I had same issue but manage to resolve. Go to device manager - USB controllers - right click on the device not found - Update driver s/w - Browse my computer for driver s/w - Let me pick from a list - Untick "show compatible hardware" - Choose Manufacture: standard USB host Controller & Model: USB Composite Device - click next.
I don't know what happened to my Pace. I could connect to it with no problems until now (last PaceFIED I installed was rel 30). Back then (two weeks ago) everything went smoothly, but now when I connect my Pace, "adb devices" can't find the watch. Adb drivers are installed (minimal_adb_fastboot_v1.4_setup.exe). I have changed NOTHING on my computer since the last time I connected the watch, but now it can't find it.
I have cleaned the contacts, restarted the Pace... Nothing is helping. Anyone have any idea?
EDIT: Never mind. The post right above helped
quick fix
I had installed adb correctly so what I do ?
For me worked to clean pins in smartwatch gently with toothpick and after that connect it again to the docking station/charger.
I don't have your luck guys. Watch is new so clean (but I still tried to clean the pins), I have no "device not found" and not a single sound when connecting the watch on 3 different computers.
The charge indicators is showing tho... so the watch receive power from computer usb ports...
any idea ?
Has anyone tried changing the USB port settings to control power? It's in the device manager for the USB ports (properties). That worked for me (found it on the net with a similar issue)
I solved my problem with the most stupid change I could do...
I read somewhere (can't even find it) that some people have had problems with the original usb cable... After 5 hours of adb drivers installations, factory reset and whatever, I just remembered that sentence and changed my usb cable. Now it's working perfectly.
While it's so simple that you can think "how couldn't he think of that before?"
Answer is : the watch is charging so no reason to be suspicious...
That could help someone would just bought it...
I resolved this problem, just connected USB cable on other port.
zelitrex36 said:
I don't have your luck guys. Watch is new so clean (but I still tried to clean the pins), I have no "device not found" and not a single sound when connecting the watch on 3 different computers.
The charge indicators is showing tho... so the watch receive power from computer usb ports...
any idea ?
Click to expand...
Click to collapse
I have the same problem
greg_h_w said:
I have the same problem
Click to expand...
Click to collapse
As stated in my previous message, I'd solved my problem by plugging another USB cable. Did you try a wire of yours?
zelitrex36 said:
As stated in my previous message, I'd solved my problem by plugging another USB cable. Did you try a wire of yours?
Click to expand...
Click to collapse
Yeah, I already try to change the cable with another one, but still no luck. This is weird to me because before that I can use that cable to connect it with my PC and now it doesn't detect at all, only work for charging. And if I use that cable to connect phone it work normally