Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
I haven't tried it but I think the problem is the magnetic cable that you are using.
ಠ_ಠ
On mobile....
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
SPtheALIEN said:
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
Click to expand...
Click to collapse
100% agree
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
Hi Julz,
I hope your device is ok. I was using a similar charger in my car. Had two USB slots. 1amp and 2.1amp.
I'm not sure what cause it, or what happened. But I've had to send my Ultra to the store where I bought it. For some reason my device did that same as you describe. It also wouldn't stop the LED from showing. Meaning that it thought it was charging all the time. (even when not plugged in)
Now amps should be fine. Its the volts that you have to worry about. I posed a thread about batteries that talks about amps volts and how to look after your device... take a look
LINK:
http://forum.xda-developers.com/showthread.php?t=2505165&highlight=battery
check it out...
I have been using my Magnetic charging cable ( I pulled out of my Sony DK30 )
in my car for over a month with the Griffin PowerJolt Micro & have not had a
single issue with the phone or the charger . here are the specs & a pic of the charger .
Technical Specifications
Input: 12 volts DC
Output: 5 volts DC at 2.1 amps
Output power: 10 watts link to charger .
link to charger =
http://store.griffintechnology.com/ipad/powerjolt-micro-ipad
Yeah I think the generic no name chargers probably lack quality circuitry to regulate the charging properly. I'm hoping the Xperia Z Ultra has some decent built in charging protection to prevent issues with minor spikes or fluctuations. Brand name chargers like griffin should be ok.
Similarly, been using the magnetic cable with a griffin car adapter without any problems since I got my unit.
Related
Hey guys,
I was wondering if these USB car chargers are compatible for the TP2?
http://cgi.ebay.com/Dual-2-Ports-US...Accessories?hash=item518f99b7a9#ht_3242wt_958
and
http://cgi.ebay.com/DC-Car-Cigarett...wItemQQptZPDA_Accessories?hash=item3a567814a2
and
http://cgi.ebay.com/Silver-Mini-Uni...Accessories?hash=item414bbc871c#ht_2000wt_958
I'm asking because I remember in the past I used a HTC charger to charge the O2 XDA Flame and it charged. However, the phone started acting VERY weird and freeze a lot. I ended up having to hard reset it
Thanks!
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
chompx2 said:
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
Click to expand...
Click to collapse
Thank you
It's best to choose one that can supply enough current (I think the wall charger supplies 2A, but 1A should be ok). Some devices will still trickle charge with a lower current, but others just won't trigger the charging circuits at all.
I had a cheap car charger that seemed to work ok most of the time, but it got worryingly hot after a while.
My TP2 came with an official HTC charger, so I use that now and it's great.
I have noticed that if the phone is OFF then 1A is not enough and usually stops charging but if the phone is ON it completes the charge..but takes for ever.
Has anyone experienced the charging overheat situation where the led flashes orange and green? I dont know if that is the situation but it only happens when I am charging in the car and the unit gets hot.
My old "OEM HTC" charger I got on ebay (the one with the blue HTC light) just stopped charging my phone after about 10-15 uses.
It lights on (charger), but my phone doesn't catch any charge lol
I got a 1A one, and unfortunately it cannot produce enough juice when running the GPS (copilot), after a while the phone shows a message telling the charge current is not enough.
The wall charger that came with the original box is 1A too, thus the problem might be with the cheap car charger.
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Hey!
Mine is a cheapo but does the trick. Charges the phone with satnav running, today went from 23% to full in less than 3 hours. Plus it's really tiny so I can keep my ashtray closed all the time. Using it with mini retractable cable, it all fits in the ashtray and it's handy to use.
http://cgi.ebay.co.uk/Micro-Nano-Ti...daptors_SM?hash=item5638c26773#ht_1747wt_1165
3waygeek said:
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Click to expand...
Click to collapse
The manual states that the output of the AC charger is 5.0 volts and 1 amp. That means the output of the DC/car charger should be the same. Using a 2 amp current might be charging the device faster but it would probably generate more heat and might shorten the battery life.
one tip, regardless of which charger you end up with, is to not leave the phone plugged in while starting the car. my understanding is that there can be be large voltage surges or fluctuations during the startup. depending on the design on the voltage converter inside the charger, some of that may be making it through to the phone.
i once had a AA NiCd battery smart charger that went wonky after using it in the car a lot, but that was with a straight-through 12V car to charger connector.
I made my own charger for using as a GPS on my motorcycles.
There is a charge select line in the plug. If the phone detects that it is connected to a USB port, the phone will not 'pull' more the 500ma. If that line is set to indicate a non USB port, then the phone will pull 1 amp. MAX (I never saw more then 900ma myself).
If you have the wrong charge plug, it may only charge at 500ma. If you have the correct plug and the charger can manage 5 amps, the phone will still only take 1 amp max.
For a while I used the phone in a waterproof box called an Aquabox. It would overheat during charging. I now only charge the phone when it is not in an enclosed hot space.
I'm still using the off-brand 'for Blackberry' car charger I got back when I had my Kaiser. Seems to be working just fine with this phone as well.
I made myself a custom car dock for my GS3 so I could use my Titan Kraken case modified to take an extended battery. The setup works great, but I've noticed something very strange. I have an NFC tag in the dock to launch Carhome Ultra. I was noticing that on my 30 drive home from work, my battery (which is charging in the new dock) would discharge about 2%. I was using a generic micro USB cable plugged into my Ravpower DC adapter, which maxes out at 2.1 amps, which is plenty. As an experiment, yesterday on the way home, the first 15 minutes I had the generic cable plugged in. After it dropped a percentage point, I unplugged the generic cable and plugged in a cable I got with a Mophie that I had. The last 15 minutes of the trip it went up 2 percentage points. Keep in mind, same DC adapter, same phone & battery and same apps running.
Can anyone explain why this is? I have experienced the same drop with at least 2 other cables. The Mophie cable and one other that I have will 'keep up' with the power demands and actually charge the battery too.
Just wondering what I should look for when buying USB cables in the future.
I've set up my Z2 as a Sat Nav in my car and using a magnetic USB lead plugged into a 3A charger. I've noticed that the phone doesn't really charge with Google maps running and playing music. It slowly loses the charge. Has anyone come across this?
Have the same issue with mine. I've got a magnetic adapter that I use with my ordinary USB cable and it can't charge the battery when I use waze and Spotify. At night I use a magnetic charger cable and then it's charging fast but not with my adapter.
Skickat via Tapatalk
Mine also charges very slowly or even discharges depending on the usage through magnetic port. My guess its due to cable being ****ty
I'm wondering maybe the cable is not delivering enough current despite my charger can output 3A.
http://forum.xda-developers.com/showthread.php?t=2765923
i think this might be a Problem of the magnetic Ports!
Pretty sure screen on, gps and active sat navigation type app on nearly all android phones will lead to this.
Fact is the device is using lots of power, so much that the charger can't keep up. You also will likely find the phone will struggle with heat issues while doing this.
Anyone find charging the Z3TC painfully slow? It takes me 6+ hours to get to full charge using the magnetic connector. Is it faster over USB? Is there anyway to see how much current is actually being drawn without root?
I'm charging using a USB wall wart, 5V/2A rating.
while charging, go to settings/about tablet/status and look what battery state is saying: "AC" means normal charging while "USB" says usb charging. The latter often is usualy limiting to 500mA. This would mean that your wallmart charge or your cable has the connectors wrong so that the device thinkgs it is on a normal pc-usb port.
tonysunshine said:
Anyone find charging the Z3TC painfully slow? It takes me 6+ hours to get to full charge using the magnetic connector. Is it faster over USB? Is there anyway to see how much current is actually being drawn without root?
I'm charging using a USB wall wart, 5V/2A rating.
Click to expand...
Click to collapse
3:50 for me to fully charge on magnetic stand.
magnetic charging
I also experience the same thing with the magnetic changer but when I use USB it does change it faster
I've noticed that as well! That it takes over 6 hours to charge up. It's very mysterious as to why though. I have the usb cord connected to a 5v/2a rated wall adapter, that takes forever to charge it with. Anyone know why or how to get it to charge faster?
So I ordered a bunch of stuff from ebay and amazon and am going to try a few things over the new few days to figure out the slow charging
1). charge using 5V/2A wall wart through a "charging" micro usb cable. This is one where the 3 data pins are not connected, only the 2 power pins. I have a rooted htc one m8 that can measure the charging current and will make sure this setup is capable of >500mA charging
2). same as above but use a micro usb to magnetic port adapter
3). charge using the official DK36 charging dock(not designed for the Z3TC as far as I know, it came with my xperia z2 phone, but the tablet fits in it and charges)
Since theres so many links in this chain(wall wart, usb cable, dock/mag port connector) I figure its worth seeing if one of them is a weak link
Any one else noticed that incipio offgrid battery only charges with Moto turbo charger and not with any other charger ?
With other chargers it shows waiting to charge
Nope. I've had no issues charging with my Nexus 5X charger or a random cable/wall plug combo.
Sent from my XT1650 using Tapatalk
With included charger, mod and phone charge at the same time. Other chargers phone charges to 100% then charges mod.
You can also charge the mod directly on a wireless charger. I do that - when it is off the phone.
theligu said:
With included charger, mod and phone charge at the same time. Other chargers phone charges to 100% then charges mod.
Click to expand...
Click to collapse
That's what I thought but both charged at the same time using a random cable and my portable charger.
Sent from my XT1650 using Tapatalk
It will charge at the same time if the connected wallwart outputs at 5V/3A minimum, which constitutes as "TurboPower" by the phone.
Doesn't have to be the included charger. Any USB-PD compatible or 5V/3A charger should do the same.
Don't use a high amperage 5V/3A charger with this phone!
Type C cables use thinner leads than micro USB, and can't take the high current.
My "Golf" brand cable started glowing at the Type C tip, the metal got so hot it turned red, and melted the plastic WHEN IN the phone.
It worked without issues for two weeks, but the tip of the plug was often luke warm, but that time for some reason it overheated and short circuited.
Incredibly my phone survived, but I'm never using a non-QC charger after this.