Hey guys,
I was wondering if these USB car chargers are compatible for the TP2?
http://cgi.ebay.com/Dual-2-Ports-US...Accessories?hash=item518f99b7a9#ht_3242wt_958
and
http://cgi.ebay.com/DC-Car-Cigarett...wItemQQptZPDA_Accessories?hash=item3a567814a2
and
http://cgi.ebay.com/Silver-Mini-Uni...Accessories?hash=item414bbc871c#ht_2000wt_958
I'm asking because I remember in the past I used a HTC charger to charge the O2 XDA Flame and it charged. However, the phone started acting VERY weird and freeze a lot. I ended up having to hard reset it
Thanks!
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
chompx2 said:
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
Click to expand...
Click to collapse
Thank you
It's best to choose one that can supply enough current (I think the wall charger supplies 2A, but 1A should be ok). Some devices will still trickle charge with a lower current, but others just won't trigger the charging circuits at all.
I had a cheap car charger that seemed to work ok most of the time, but it got worryingly hot after a while.
My TP2 came with an official HTC charger, so I use that now and it's great.
I have noticed that if the phone is OFF then 1A is not enough and usually stops charging but if the phone is ON it completes the charge..but takes for ever.
Has anyone experienced the charging overheat situation where the led flashes orange and green? I dont know if that is the situation but it only happens when I am charging in the car and the unit gets hot.
My old "OEM HTC" charger I got on ebay (the one with the blue HTC light) just stopped charging my phone after about 10-15 uses.
It lights on (charger), but my phone doesn't catch any charge lol
I got a 1A one, and unfortunately it cannot produce enough juice when running the GPS (copilot), after a while the phone shows a message telling the charge current is not enough.
The wall charger that came with the original box is 1A too, thus the problem might be with the cheap car charger.
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Hey!
Mine is a cheapo but does the trick. Charges the phone with satnav running, today went from 23% to full in less than 3 hours. Plus it's really tiny so I can keep my ashtray closed all the time. Using it with mini retractable cable, it all fits in the ashtray and it's handy to use.
http://cgi.ebay.co.uk/Micro-Nano-Ti...daptors_SM?hash=item5638c26773#ht_1747wt_1165
3waygeek said:
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Click to expand...
Click to collapse
The manual states that the output of the AC charger is 5.0 volts and 1 amp. That means the output of the DC/car charger should be the same. Using a 2 amp current might be charging the device faster but it would probably generate more heat and might shorten the battery life.
one tip, regardless of which charger you end up with, is to not leave the phone plugged in while starting the car. my understanding is that there can be be large voltage surges or fluctuations during the startup. depending on the design on the voltage converter inside the charger, some of that may be making it through to the phone.
i once had a AA NiCd battery smart charger that went wonky after using it in the car a lot, but that was with a straight-through 12V car to charger connector.
I made my own charger for using as a GPS on my motorcycles.
There is a charge select line in the plug. If the phone detects that it is connected to a USB port, the phone will not 'pull' more the 500ma. If that line is set to indicate a non USB port, then the phone will pull 1 amp. MAX (I never saw more then 900ma myself).
If you have the wrong charge plug, it may only charge at 500ma. If you have the correct plug and the charger can manage 5 amps, the phone will still only take 1 amp max.
For a while I used the phone in a waterproof box called an Aquabox. It would overheat during charging. I now only charge the phone when it is not in an enclosed hot space.
I'm still using the off-brand 'for Blackberry' car charger I got back when I had my Kaiser. Seems to be working just fine with this phone as well.
Related
Has anyone else had this problem? I plug my Photon into a USB power adapter plugged into my car's cigarette lighter and the phone displays the message that the device is charging but the percent of charge continues to decline. I have changed USB adapters and USB cables but it still happens. If I use an AC adapter and the same USB cable the phone charges correctly.
Is it a software or hardware problem? I was unlocked and rooted using several of the current custom ROMs and the charging process in the car worked then. When I re-locked and went back to stock and re-rooted then this happened.
i am having the same issue as of yesterday. Did you ever find out what the issue was?
im guessing that the car was off and that it was a foreign car...
Numerous issue could actually cause the same symptoms, Apps/games in the background... failing alternator, failing cigarette lighter, failing car adapter...
car not running while its charging could also cause this issue depending on charge level of the battery and the volts of the battery...
What you'll need to do is eliminate the possibilities..
Try with the car on and the phone on...
try with the car on and the phone off...
try with a different adapter for the car...
try with a different usb cord...
try with a magnum 44 aimed at it...
Try with a different Car is also another good option.
Ditto.
I am having the same problem.....worked fine before I unlocked/rooted. Anyone else have a suggestion?
I have the same issue with the incar charger and using a computers usb port to charge my phone..(doesnt charge when under load ..ie-dowloading something)...i think that it is the charger being underpowered..example..
Stock a/c charger puts out 850mA
Most computer usb and standard car usb chargers only put out around 500mA
Sent from my MB855 using xda premium
Mine charges very slowly in the car. The other day, I plugged in at 32%. Drove 30 minutes to get home, and it had only reached 37%. Plugged in at home, and within 10 minutes had well over 50%, even though I was actively using it then.
This is on stock rooted, btw.
The stock drivers must use a very conservative power draw when plugged into a relatively low-output power source. By contrast, the power draw from a high-output AC adapter must be quite aggressive, because it charges more quickly than other phones I've used when plugged into AC.
It did turn out to be caused by the car charger being underpowered. I went to BestBuy and bought a "high capacity" charger and all is good!
ChadH42 said:
It did turn out to be caused by the car charger being underpowered. I went to BestBuy and bought a "high capacity" charger and all is good!
Click to expand...
Click to collapse
Which specific car charger did you get? I'm having the same problem too!
The Photon needs at least 850mA charger to get charge currently. Otherwise it charge slowly or not charge at all.
Can anyone post a link to a specific charger that is working great for you and charging fast while in the car?
has any one who got charger working ? can anyone pls post the link to product
thanks in advance
vabs99 said:
has any one who got charger working ? can anyone pls post the link to product
thanks in advance
Click to expand...
Click to collapse
This one worked for me!
http://www.amazon.com/Motorola-Vehi...93004842&sr=8-2&keywords=motorola+car+charger
When ever I drive, I have my phone hooked up to my Escort Red Line radar detector and my car's stereo via bluetooth (both). In order for me to use the radar detector effective, I need to have GPS and Blueooth enabled. This is a HUGE SUPER OMG battery drainer for my amaze. 20 minutes drive kills about 35% of the phone's power. My radar detector offers a slot to charge my phone BUT it still drains, not enough juice flowing in. Someone said it is because it's probably a .5amp.
So I am running a extension from the 12v lighter that's in the trunk to the front of my car. Amazon has a generic 2.1amp for 3 bucks.
http://www.amazon.com/Premium-Heavy...121&sr=8-1&keywords=htc+amaze+car+charger+amp
But on ebay, I found the original HTC car charger for 15 bucks which is a 1amp.
http://www.ebay.com/itm/HTC-Amaze-4...918506?pt=PDA_Accessories&hash=item27c867022a
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
The 2.1 amp is probably 1 amp per port. Although it does not seem to specify.
F9zSlavik said:
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
Click to expand...
Click to collapse
Right!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 08:41 AM ----------
soundping said:
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
Click to expand...
Click to collapse
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Higher voltage will trip a warning window telling you to disconnect and use official HTC equipment.
The phone monitors input voltage to protect the equipment.
nyc_tdi said:
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Click to expand...
Click to collapse
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
I recently got an Amaze and am generally happy with it. The biggest problem I have right now is finding the right car charger for it because the car charger I previously used (a 1A monoprice car charger) doesn't give it enough charge. I have been reading through the forums and some has been saying that if the charger is not working properly, it will recognize it as charging via USB rather than AC. In my case, the phone seems to be reading it as charging through AC, but there still doesn't seem to be enough current going through it. The phone will only charge if NOTHING is going on (i.e. screen's off, no GPS, etc.). I've been using CoPilot GPS and it draws the battery like crazy. Anyone has any idea as to which car charger would work properly with the Amaze such that I'll be able to charge (or at least maintain the charge) while using it as a GPS? Do I need to go up to a 2.1A charger?
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
I couldve sworn we talked about this months ago. Let me see if I can find the thread.
nguyendqh said:
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
Click to expand...
Click to collapse
you won't get the full 2.1a unless you usee a charge only cable or modify the charger as I stated above...
I ended up getting a 2.1A car charger and a USB charge only cable, and it's working perfectly. When I have the screen on full brightness and doing navigation with Co-Pilot GPS, my phone's no longer losing charge and is actually charging. The combo also works with my tablet as well.
blast0id said:
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
Click to expand...
Click to collapse
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Silentbtdeadly said:
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Click to expand...
Click to collapse
I have done this to every single one of my USB car chargers... not a single issue...
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Slow Charge Message
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Same here. Glad to hear it is not just me. I just got off with NA HTC Tech Support. There official stance is that they do not recommend or support using any device other than the official charging cable and plug in device. They went as far to say that they do not support charging in the car. I just about flipped my lid on the phone.
Here is the link to their site: http://www.htc.com/us/support/howto...783&p_name=droid-dna-by-htc-(verizon-wireless)
"Only the power adapter and USB cable provided in the box must be used to charge the battery"
I was told by Verizon that this was just a scare tactic, while HTC says I am not getting the right charge and they have no answer since they do not support DC charging in the car. Any info people have is appreciated. It works fine with Hard Wired DC -MicroUSB, but not with any USB Plug in.
Any apps that would help me measure the amount of charge it is getting?
Thanks in advance.
What are the specs on your car charger?
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
So odd that they would do that, especially with the power draw of the phone. However you can charge using the battery packs?
My car adapter is a Macally USB car adapter model carusb10 output 5v/2.1 amp x1 500mA x2.
As for my house adapters the RCA 2 port USB wall adapter. 2.1 Amp x 1 or 1000mA x 2 I believe.
Sent from my HTC6435LVW using Tapatalk 2
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
xcesivemastub8ah said:
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
Click to expand...
Click to collapse
I have tried several different USB adaptors, from Razorfish(BestBuy), Belkin single USB input 2.1amp, innocell (RadioShack) dual SUB 3.1amp. Same problem on all.
On the other hand, any direct Wall connection with USB cable attached seems to work fine.
Also, I have the Motorola p4000 battery backup and when I plug that in, it also works fine and views it as AC.
Swapping the pins didn't work for me, same issue. Its a pita for me especially charging in the car because when using phone for navigation it charges so slow that it can't actually charge my phone and my battery decreases. I've went the route in the car I use my nexus 7 charger connected to an inverter.
Sent from my HTC6435LVW using Tapatalk 2
From my phone conversation with Seth from HTC Support, the slow charging warning is due to the update because the update incorporates the faster charging feature that qualcomm & htc have referenced too recently (can't remember what its actually called). The phone has a new type of charging setup that makes it charge faster than some other phones.
Unfortunately some chargers (wall/car) dont supply enough voltage to activate the charging feature so while the phone does charge fine (it charges at standard phone charge rate) it cannot charge at the faster rate due to the charger.
He states that this will not harm the phone and ther phone will charge fine and it a normal time. You can disregard the warning. For those that like the faster charge rate, you have to use the right charger/cable.
Before the update our phones were mostly charging at the slower rate and that's why most didn't see a warning unless the cable being used was below the standard rate of charge.
Hope this helps
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Why are there so many problems about this thing lately even me, I experience this most of the time
When I use the Best Buy 2.1 amp wall charger I still get the message.
I'll need to find my oem wall charger.
So far every one I have gives this message.
I haven't seen this message at all on any of my charges but I haven't charged in the car yet. My battery usually lasts for more than the while day so I just charge at night.
Sent from my HTC6435LVW using xda app-developers app
Well with the faster charging enabled it does charge pretty quick especially using my nexus 7 wall adapter, even with my Nokia Qi pad. But man that last percent takes a while.
As of now I'm using supercharged hatka ROM slim 3.0.3 and getting good battery life. Even in the middle of nowhere where 75% percent of the time when I'm in the plant its searching for signal. I'll leave work after 8 hours and still be at 60%
Guess you can say its the only negative I have for the phone. Trust me the battery life is much better in the plant then my old bionic. I use to have to change the standard battery after 4 or 5 hours as it was completely dead.
Sent from my HTC6435LVW using Tapatalk 2
Last night I received my daughters replacement Rezound from the warranty company. It came with a 1 amp wall charger.
I plugged it into my DNA and did not get the notice of slower charging and it charged quicker than I've ever seen it.
Too bad my 2.1 best buy one won't.
The quick charge capable chargers must output just slightly higher voltage to trigger the rapid charge mode.
I'll experiment some day and see.
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I have the charger that came with the phone it it fully charges my DNA in 2 hours from 3%
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I kinda figured it was something with the pins if I wasn't voltage offset.
I did find that one of my car chargers from best buy runs in quick charge. The cable I fixed, rather than using a usb cable in a slot on the charger.
The best number 2.1 amp wall charger uses a data type cable.
Maybe I'll check into shorting the pins on that sucker to get quick charge mode.
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
The phone is doing more than checking pins now. I have a 2.1 Amp dual charger with pins shorted and get the warning. It happily charged in AC mode before the update. The charger can also charge a nexus 10 at 2 Amps. I'm guessing the kernel devs will have to locate the source of the warning. I thought the resistance between the data pins might be the trigger, but there is no difference between the HTC charger and my dual charger. It does seem my car charger is unaffected.
I have found that to trick the phone into AC mode you have to short the the actual cable. Hence strip the insulation off the wires and short the data wires together. Has worked for me on all my chargers.
Sent from my HTC6435LVW using Tapatalk 2
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Clay333 said:
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Click to expand...
Click to collapse
It could be the charging equipment your phone or it could also be the power source not providing enough power to the device for it to charge fast so it charges slow.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
I'm using old charges at home and in the office and it did seems slow but had not heard of rapid charge. Will the phone indicate this rapid charge mode? If not, is it real?
I'm getting slow charging even on the stock HTC charger. Not sure how I can enable this rapid charge cause 4+ hours from 0-1% to full is a bit ridiculous.
use orginal charger is best , maybe it has some relationship with your battery life
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
flooty333 said:
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
Click to expand...
Click to collapse
Try to change your phone
c5satellite2 said:
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i've done exactly this, and damned if the One still refuses to draw more than ~500 ma off of anything but the 2.1 A wallwart it came with (i don't have any others to try with). i'm about to dig out an old inverter to see if that will actually work. wish i'd paid more attention to my EE dad when i lived at home; i've gotten a serious crash course in this stuff while trying to get my One to charge in my car, when it's on.
edit: so i got my old inverter out, and spent about 15 minutes testing. i used the 2.0A adapter that came with my Nexus 7 to test, as well as the 3.1A Mediabridge adapter i got here. my phone was at about 45% when i started testing. unplugged, Battery Monitor Widget reported a drain of anywhere between 500ma and 650ma (running Ingress, wifi on). plugged in to the Mediabridge adapter showed, at best, a drain of 50ma. the Nexus adapter plugged in to my inverter charged at a fairly consistent ~120ma. i didn't touch my phone the entire time.
i left my Nexus 7 at work so i can't use it to repeat the test, but i will do so tomorrow. the cable i'm using is this one. i'm not crazy about having a ridiculous DC-AC inverter in my car for my phone, but if that's what i have to do so it can be used and not drain, then so be it. admittedly, i don't really understand these things enough to explain these variations, but i plan on learning ASAP. perhaps somebody else can shed some light on why the device charges different, and how it identifies an AC-USB adapter vs a DC-USB adapter.
sluflyer06 said:
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
Click to expand...
Click to collapse
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
nest75068 said:
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
Click to expand...
Click to collapse
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
veener79 said:
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Click to expand...
Click to collapse
Same here, 2a Nexus 7 brick with a long Logitech USB cable, much faster than stock (and longer)
Harbinger1080 said:
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
Click to expand...
Click to collapse
I'm fortunate my car has a built in inverter that I use for charging my phone.
nest75068 said:
I'm fortunate my car has a built in inverter that I use for charging my phone.
Click to expand...
Click to collapse
My next car will too, because I can only imagine that power requirements for these devices is going to increase.
That said, I think I have a winner, and instead of retyping my posts, I'll just link to that thread instead: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6
Since the snap Dragon 600 has fast charging capabilities, why didn't HTC Include it in the kernel??? I've noticed my 2500 mAh note battery charges faster than my 2300 MAH HTC one
Sent from the Sexiest Android Device (HTC One)
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
I haven't tried it but I think the problem is the magnetic cable that you are using.
ಠ_ಠ
On mobile....
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
SPtheALIEN said:
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
Click to expand...
Click to collapse
100% agree
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
Hi Julz,
I hope your device is ok. I was using a similar charger in my car. Had two USB slots. 1amp and 2.1amp.
I'm not sure what cause it, or what happened. But I've had to send my Ultra to the store where I bought it. For some reason my device did that same as you describe. It also wouldn't stop the LED from showing. Meaning that it thought it was charging all the time. (even when not plugged in)
Now amps should be fine. Its the volts that you have to worry about. I posed a thread about batteries that talks about amps volts and how to look after your device... take a look
LINK:
http://forum.xda-developers.com/showthread.php?t=2505165&highlight=battery
check it out...
I have been using my Magnetic charging cable ( I pulled out of my Sony DK30 )
in my car for over a month with the Griffin PowerJolt Micro & have not had a
single issue with the phone or the charger . here are the specs & a pic of the charger .
Technical Specifications
Input: 12 volts DC
Output: 5 volts DC at 2.1 amps
Output power: 10 watts link to charger .
link to charger =
http://store.griffintechnology.com/ipad/powerjolt-micro-ipad
Yeah I think the generic no name chargers probably lack quality circuitry to regulate the charging properly. I'm hoping the Xperia Z Ultra has some decent built in charging protection to prevent issues with minor spikes or fluctuations. Brand name chargers like griffin should be ok.
Similarly, been using the magnetic cable with a griffin car adapter without any problems since I got my unit.