Help Please! - Sprint Samsung Galaxy Note 3

I was on JB rom and updated to the new beta test rom and the following happened.
I installed 2.0.0 Beta on phone not storage card. I then made a back up before I flashed the rom then wiped cache, dalvic cache and system three times. I then installed rom, it booted up to my unlock pattern screen.
Now here is the problem every time I put in my unlock pattern the phone goes black comes back on to the unlock pattern screen again? I must have put in my unlock pattern 10 times and 10 times it goes black and starts up in the unlock screen. This does not appear to be a reboot more like a small shut down? I pulled battery same thing, I reinstalled 2.0.0 Beta, same thing.
So I restored my backup and the phone now goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Pulled the battery twice and same thing happened will not go pass the boot up Samsung screen and tone.
So I then go to recovery wipe everything Cache, dalvic, data and system. Restore the back up again and the phone does the same thing goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Keep just doing this pattern?
I then tried to restore to stock using ODIN and installed N900PVPUBMI5_N900PSPTBMI5_N900PVPUBMI5_HOME.tar.m d5 from JB's file and I get a fail each time?
I then downloaded KERNEL-SPR-N900PVPUBMI3-1378528567.tar and it installed passed but now I am stuck in the Samsung screen?
Any help with clear directions to unroot and restore to stock rom with location of files to use I would be grateful for.

I guess I am just screwed?

claude9039u said:
I guess I am just screwed?
Click to expand...
Click to collapse
This is a case of calm down too much flashing and restoring.
Do you know what firmware you are on?
I know people were having problems if they were on mj4 and tried to odin mi3 or mi5. You need to read some of the posts already posted about how to get out of trouble...lots of good suggestions if you read
Sent from my SM-N900P using Xparent Purple Tapatalk 2

claude9039u said:
I was on JB rom and updated to the new beta test rom and the following happened.
I installed 2.0.0 Beta on phone not storage card. I then made a back up before I flashed the rom then wiped cache, dalvic cache and system three times. I then installed rom, it booted up to my unlock pattern screen.
Now here is the problem every time I put in my unlock pattern the phone goes black comes back on to the unlock pattern screen again? I must have put in my unlock pattern 10 times and 10 times it goes black and starts up in the unlock screen. This does not appear to be a reboot more like a small shut down? I pulled battery same thing, I reinstalled 2.0.0 Beta, same thing.
So I restored my backup and the phone now goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Pulled the battery twice and same thing happened will not go pass the boot up Samsung screen and tone.
So I then go to recovery wipe everything Cache, dalvic, data and system. Restore the back up again and the phone does the same thing goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Keep just doing this pattern?
I then tried to restore to stock using ODIN and installed N900PVPUBMI5_N900PSPTBMI5_N900PVPUBMI5_HOME.tar.m d5 from JB's file and I get a fail each time?
I then downloaded KERNEL-SPR-N900PVPUBMI3-1378528567.tar and it installed passed but now I am stuck in the Samsung screen?
Any help with clear directions to unroot and restore to stock rom with location of files to use I would be grateful for.
Click to expand...
Click to collapse
If your on MJ4 then you cant downgrade at all to MI5 or MI3.....try wipping everything & install freezas stock mj4 rom: http://forum.xda-developers.com/showthread.php?t=2472664

Thanks I tried that it does not work. I think what I need is a Mj4.Tar file to push through odin? I have tried everything else I think?

If u are within your return Window, swap it out
Sent from my SM-N900P using xda app-developers app

claude9039u said:
Thanks I tried that it does not work. I think what I need is a Mj4.Tar file to push through odin? I have tried everything else I think?
Click to expand...
Click to collapse
Try the other custom recovery
Sent from my SM-N900P using XDA Premium 4 mobile app

Ok well its looks like I a without a phone of course tech support on the phone sends me to the store. Store tech support cant do anything. Since the phone is over 30 day old they will give me a refurbished phone. But that's a problem there are none so they tell me to call Samsung??
So now I a on the phone with sprint but looks like in the end I a pounding sand. Without a mj4.tar to push with odin I have a brick!!!
QUOTE=claude9039u;47170179]I was on JB rom and updated to the last beta test rom and the following happened.
I installed 2.0.0 Beta on phone not storage card. I then made a back up before I flashed the rom then wiped cache, dalvic cache and system three times. I then installed rom, it booted up to my unlock pattern screen.
Now here is the problem every time I put in my unlock pattern the phone goes black comes back on to the unlock pattern screen again? I must have put in my unlock pattern 10 times and 10 times it goes black and starts up in the unlock screen. This does not appear to be a reboot more like a small shut down? I pulled battery same thing, I reinstalled 2.0.0 Beta, same thing.
So I restored my backup and the phone now goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Pulled the battery twice and same thing happened will not go pass the boot up Samsung screen and tone.
So I then go to recovery wipe everything Cache, dalvic, data and system. Restore the back up again and the phone does the same thing goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Keep just doing this pattern?
I then tried to restore to stock using ODIN and installed N900PVPUBMI5_N900PSPTBMI5_N900PVPUBMI5_HOME.tar.m d5 from JB's file and I get a fail each time?
I then downloaded KERNEL-SPR-N900PVPUBMI3-1378528567.tar and it installed passed but now I am stuck in the Samsung screen?
JB responded for me to do:
Originally Posted by JoshBeach View Post
Phones not bricked. You have corrupt data
Its only bricked ig u cant get in download mode.
Try wiping data, system, cache and dalvic cache. then flash either official jellybomb ver. 1 or stock mj4 rom by freeza.
You cant go backwards from mj4 to older firmware... I dont believe...
So I did:
Since I installed KERNEL-SPR-N900PVPUBMI5-1379320673.tar I have a stock recovery so I ODIN'ed CF-Auto_root and then openrecovery-twrp. This gave me TWRP 2.6.3.7 and from there I wiped data, system cashe and dalvic cache. I then rerooted. TWRP told me I had no OS installed are you sure I said yes. TWRP then says your device does not appear to be rooted?? I then go back into TWRP and flash JB ver 1.0.0. It says install busybpx install kernel done updateing partition details... E: unable to mount '/usbstorage"
Successful so I then reboot system.
I get samsung screen and song that goes black and I get samsung note 3 screen and music. Screen goes black and it keeps on repeating itself?
JB came back and said
Ok. Lots of errors to your process there.. no need to do some of the steps.
So do this... if u have working twrp.
Factory reset in twrp.
Then install mj4 stock rom. And let it boot
I then did as he said
It appears that I have a working twrp so I down loaded SM-N900p_HLTESPR-MJ4-Odes-v2 from freeza. I went to twrp did a factory reset and flashed SM-N900p_HLTESPR-MJ4-Odes-v2
While flashing I did notice that it did not find MD5 file. In the end it says that it was a successful install. It rebooted did its thing, got to andriod upgrading and rebooted. Samsung screen song and got a process system isn't responding and it rebooted again doing the same thing?
And now I am in Samsung boot up screen get process system isn't responding and the phone keeps rebooting doing the same.[/QUOTE]
It looks that without a mj4.tar file to use odin my phone is dead

claude9039u said:
Ok well its looks like I a without a phone of course tech support on the phone sends me to the store. Store tech support cant do anything. Since the phone is over 30 day old they will give me a refurbished phone. But that's a problem there are none so they tell me to call Samsung??
So now I a on the phone with sprint but looks like in the end I a pounding sand. Without a mj4.tar to push with odin I have a brick!!!
QUOTE=claude9039u;47170179]I was on JB rom and updated to the last beta test rom and the following happened.
I installed 2.0.0 Beta on phone not storage card. I then made a back up before I flashed the rom then wiped cache, dalvic cache and system three times. I then installed rom, it booted up to my unlock pattern screen.
Now here is the problem every time I put in my unlock pattern the phone goes black comes back on to the unlock pattern screen again? I must have put in my unlock pattern 10 times and 10 times it goes black and starts up in the unlock screen. This does not appear to be a reboot more like a small shut down? I pulled battery same thing, I reinstalled 2.0.0 Beta, same thing.
So I restored my backup and the phone now goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Pulled the battery twice and same thing happened will not go pass the boot up Samsung screen and tone.
So I then go to recovery wipe everything Cache, dalvic, data and system. Restore the back up again and the phone does the same thing goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Keep just doing this pattern?
I then tried to restore to stock using ODIN and installed N900PVPUBMI5_N900PSPTBMI5_N900PVPUBMI5_HOME.tar.m d5 from JB's file and I get a fail each time?
I then downloaded KERNEL-SPR-N900PVPUBMI3-1378528567.tar and it installed passed but now I am stuck in the Samsung screen?
JB responded for me to do:
Originally Posted by JoshBeach View Post
Phones not bricked. You have corrupt data
Its only bricked ig u cant get in download mode.
Try wiping data, system, cache and dalvic cache. then flash either official jellybomb ver. 1 or stock mj4 rom by freeza.
You cant go backwards from mj4 to older firmware... I dont believe...
So I did:
Since I installed KERNEL-SPR-N900PVPUBMI5-1379320673.tar I have a stock recovery so I ODIN'ed CF-Auto_root and then openrecovery-twrp. This gave me TWRP 2.6.3.7 and from there I wiped data, system cashe and dalvic cache. I then rerooted. TWRP told me I had no OS installed are you sure I said yes. TWRP then says your device does not appear to be rooted?? I then go back into TWRP and flash JB ver 1.0.0. It says install busybpx install kernel done updateing partition details... E: unable to mount '/usbstorage"
Successful so I then reboot system.
I get samsung screen and song that goes black and I get samsung note 3 screen and music. Screen goes black and it keeps on repeating itself?
JB came back and said
Ok. Lots of errors to your process there.. no need to do some of the steps.
So do this... if u have working twrp.
Factory reset in twrp.
Then install mj4 stock rom. And let it boot
I then did as he said
It appears that I have a working twrp so I down loaded SM-N900p_HLTESPR-MJ4-Odes-v2 from freeza. I went to twrp did a factory reset and flashed SM-N900p_HLTESPR-MJ4-Odes-v2
While flashing I did notice that it did not find MD5 file. In the end it says that it was a successful install. It rebooted did its thing, got to andriod upgrading and rebooted. Samsung screen song and got a process system isn't responding and it rebooted again doing the same thing?
And now I am in Samsung boot up screen get process system isn't responding and the phone keeps rebooting doing the same.
Click to expand...
Click to collapse
It looks that without a mj4.tar file to use odin my phone is dead[/QUOTE]
Or sell it to someone...lol if u cant wait for a mj4.tar...
Sent from my SM-N900P using XDA Premium 4 mobile app

claude9039u said:
Ok well its looks like I a without a phone of course tech support on the phone sends me to the store. Store tech support cant do anything. Since the phone is over 30 day old they will give me a refurbished phone. But that's a problem there are none so they tell me to call Samsung??
So now I a on the phone with sprint but looks like in the end I a pounding sand. Without a mj4.tar to push with odin I have a brick!!!
QUOTE=claude9039u;47170179]I was on JB rom and updated to the last beta test rom and the following happened.
I installed 2.0.0 Beta on phone not storage card. I then made a back up before I flashed the rom then wiped cache, dalvic cache and system three times. I then installed rom, it booted up to my unlock pattern screen.
Now here is the problem every time I put in my unlock pattern the phone goes black comes back on to the unlock pattern screen again? I must have put in my unlock pattern 10 times and 10 times it goes black and starts up in the unlock screen. This does not appear to be a reboot more like a small shut down? I pulled battery same thing, I reinstalled 2.0.0 Beta, same thing.
So I restored my backup and the phone now goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Pulled the battery twice and same thing happened will not go pass the boot up Samsung screen and tone.
So I then go to recovery wipe everything Cache, dalvic, data and system. Restore the back up again and the phone does the same thing goes to the boot up Samsung screen and tone, then goes to unlock pattern for a few seconds and back to Samsung boot up screen? Keep just doing this pattern?
I then tried to restore to stock using ODIN and installed N900PVPUBMI5_N900PSPTBMI5_N900PVPUBMI5_HOME.tar.m d5 from JB's file and I get a fail each time?
I then downloaded KERNEL-SPR-N900PVPUBMI3-1378528567.tar and it installed passed but now I am stuck in the Samsung screen?
JB responded for me to do:
Originally Posted by JoshBeach View Post
Phones not bricked. You have corrupt data
Its only bricked ig u cant get in download mode.
Try wiping data, system, cache and dalvic cache. then flash either official jellybomb ver. 1 or stock mj4 rom by freeza.
You cant go backwards from mj4 to older firmware... I dont believe...
So I did:
Since I installed KERNEL-SPR-N900PVPUBMI5-1379320673.tar I have a stock recovery so I ODIN'ed CF-Auto_root and then openrecovery-twrp. This gave me TWRP 2.6.3.7 and from there I wiped data, system cashe and dalvic cache. I then rerooted. TWRP told me I had no OS installed are you sure I said yes. TWRP then says your device does not appear to be rooted?? I then go back into TWRP and flash JB ver 1.0.0. It says install busybpx install kernel done updateing partition details... E: unable to mount '/usbstorage"
Successful so I then reboot system.
I get samsung screen and song that goes black and I get samsung note 3 screen and music. Screen goes black and it keeps on repeating itself?
JB came back and said
Ok. Lots of errors to your process there.. no need to do some of the steps.
So do this... if u have working twrp.
Factory reset in twrp.
Then install mj4 stock rom. And let it boot
I then did as he said
It appears that I have a working twrp so I down loaded SM-N900p_HLTESPR-MJ4-Odes-v2 from freeza. I went to twrp did a factory reset and flashed SM-N900p_HLTESPR-MJ4-Odes-v2
While flashing I did notice that it did not find MD5 file. In the end it says that it was a successful install. It rebooted did its thing, got to andriod upgrading and rebooted. Samsung screen song and got a process system isn't responding and it rebooted again doing the same thing?
And now I am in Samsung boot up screen get process system isn't responding and the phone keeps rebooting doing the same.
Click to expand...
Click to collapse
Try this might work: http://forum.xda-developers.com/showthread.php?t=2507403

Related

[Q] Can't remove installed software and can't use odin

Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
If you want to do a full wipe of you device,cos it sounds like tha boot logo is corrupt,then boot to recovery and wipe cache partition and dalvik cache.then go to "storage and mounts" and format system,data and cache.Select "Go Back" and factory reset your phone and reboot.If it doesnt go past the boot logo after 1min then pull the battery,put it back in and turn it back on.Its a pain in the arse but it will completely clean up your device and if you where rooted you will need to probably reroot but berfore hand plug in your phone to your PC so it gets recognized again.
EDIT:Just incase,first of all download titanium backup from the market and backup your apps!!!!
Sting Rray said:
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
Click to expand...
Click to collapse
You need to wipe usb storage, sd card, then put phone in download mode, flash stock ROM using Odin. You need to fully wipe everything.
Sent from my Sexynos SGH-i777 using XDA Premium.
I've trying reflashing the stock ROM and kernel; however, it gives me a FAIL and says can't open the serial (COM) port.
I have solved the problem by closing Samsung Kies and wiping the system, thanks for all the help offered.

[Q] Stuck on bootscreen

Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!

Phone won't boot past Samsung Screen

So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Emerica. said:
So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Click to expand...
Click to collapse
whipe the delvic cache and cache. Which recovery you have installed?
solson20 said:
whipe the delvic cache and cache. Which recovery you have installed?
Click to expand...
Click to collapse
TWRP. Also I did try wiping dalvik and cache.
Emerica. said:
TWRP. Also I did try wiping dalvik and cache.
Click to expand...
Click to collapse
sounds stupid, but try whiping it like 2-3 times in a row and then reboot
Try http://forum.xda-developers.com/showthread.php?t=2301259 and let us know. I have the very same issue with my phone but ended up giving up and getting verizon to replace it but would really like to know if this works.
Emerica. said:
So I just restarted my phone after doing nothing particular and it just will not boot. It gets to the Samsung screen with the Unlocked Lock that says 'Custom' and it just freezes there. I pulled the battery and boot again, nothing. I booted into recovery and wiped it all and re-flashed the bebloated ROM, still won't boot. Anyone have any other suggestions???
Click to expand...
Click to collapse
Take out the SD card and try a reboot...if that doesn't work.....its odin time.
did you pull the battery for 10 seconds and retry?
same problem
I have the same problem. The only rom I can boot is slim bean.
i have had this happen to me and the only way i was able to fix was to odin back to stock grab this
(SCH-I545_MDK_562219_Stock_Restore)
http://forum.xda-developers.com/showthread.php?t=2289325:good:
Hey guys, sorry it took so long for me to get back. After 3 wipes I was able to get everything back to stable and it has not locked up like that again. Thanks for all your suggestions, I may need them again someday haha.
damn
basically have the same problem but i have a stock rooted backup in twrp... (which i have to restore once a day).... every time the phone dies or or battery comes out, there no way of starting without wipe and restore, and even then it doesn't let me boot into twrp until a few tries also once in a while my twrp asks for a password, which ive never put on.. so anyways if theere are any new suggestions id be happy to try them out

TWRP - wipe cache/dalvik/anything.... soft brick...

So I have been following the unofficial cm-10.2 ROM. I have dirty flashed probably 3 times without issue. I flash the ROM, a pinlock removal zip and gapps. Then wipe dalvik/cache and reboot. I started doing this with twrp 2.6.
So this morning I grab the latest update, backup, flash.l, reboot.... nothing.
Stuck at LG logo to a black screen. I can get into bootloader, blindly vol down twice and into recovery, now twrp 2.5, so I try to recover by backup, reboot.... black screen.
So I try wiping/factory reset, clean flash, reboot.... black screen...
Now I am a little concerned. I read up and find out about TeenyBin, so I setup my machine to flash the standard zip and that doesn't really work, it flashes fine, reboots but is stuck at LG logo and the tool reports disconnected, so the tool fails kind of. So I try the alternate, same sort of thing, but now it says Google instead of LG and is stuck there. I can get into bootloader, can see text now (nice!) and get into recovery, still 2.5. Tried restoring, wiping/flashing, nothing working..... stuck at Google logo.
So, then I went and formatted internal storage. Bingo! Now I can flash/restore/whatever and I can reboot and get into ROM!
Woah, woah, woah... Not so fast.
So now if I wipe anything, cache/dalvik/system/ANYTHING it soft bricks. I have to again format internal, then flash. That doesn't seem right to me. Sure, I have a functioning phone, but updating is a bigger ***** now that I have to completely format before flashing.
So my question to you all, how do I fix this? Do I need to completely go back to stock image and reroot? I appreciate all your suggestions.
daveerickson said:
So I have been following the unofficial cm-10.2 ROM. I have dirty flashed probably 3 times without issue. I flash the ROM, a pinlock removal zip and gapps. Then wipe dalvik/cache and reboot. I started doing this with twrp 2.6.
So this morning I grab the latest update, backup, flash.l, reboot.... nothing.
Stuck at LG logo to a black screen. I can get into bootloader, blindly vol down twice and into recovery, now twrp 2.5, so I try to recover by backup, reboot.... black screen.
So I try wiping/factory reset, clean flash, reboot.... black screen...
Now I am a little concerned. I read up and find out about tinyrom, so I setup my machine to flash the standard zip and that doesn't really work, it flashes fine, reboots but is stuck at LG logo and the tool reports disconnected, so the tool fails kind of. So I try the alternate, same sort of thing, but now it says Google instead of LG and is stuck there. I can get into bootloader, can see text now (nice!) and get into recovery, still 2.5. Tried restoring, wiping/flashing, nothing working..... stuck at Google logo.
So, then I went and formatted internal storage. Bingo! Now I can flash/restore/whatever and I can reboot and get into ROM!
Woah, woah, woah... Not so fast.
So now if I wipe anything, cache/dalvik/system/ANYTHING it soft bricks. I have to again format internal, then flash. That doesn't seem right to me. Sure, I have a functioning phone, but updating is a bigger ***** now that I have to completely format before flashing.
So my question to you all, how do I fix this? Do I need to completely go back to stock image and reroot? I appreciate all your suggestions.
Click to expand...
Click to collapse
Give CWM a shot and see if it does the same thing?

Please help with this flusterc*ck of issues

Hi all,
New to this whole rooting and flashing thing. I'm not as good with computers that one can hold in their hand.
Anyways, I'll try to explain this stew of issues that I have
I'm running CW Recovery (6.0.2.3) in conjunction with SlimBean (dtt 4.2.2). One day, in a far away land, my phone prompted me to update Slim. That was all and dandy because I've flashed roms from zip files before. When I tried to do that, the process was aborted and I was given a slew of error numbers that made my brain hurt.
So, I tried to start fresh and clean, like the cilantro that chipotle puts in our burrito bowls. I tried a factory reset using the CW Recovery mode so I can re-root now that jellybean is 4.3. After I wiped the cache and data/factory reset, I rebooted the phone. My phone still boots into Slim and uses clockwork for recovery mode.
Essentially, how do I de-root my phone or factory reset it to the settings that I had from day 1?
UPDATE: I just tried flashing CW Recovery from 6.0.2.3 --> 6.0.4.7. After flashing it, I rebooted my phone into recovery. Now I'm getting a never-ending boot cycle. The samsung logo pops up along with the little blue text "recovery" at the top, then shuts off and repeats that every 3 seconds or so. Methinks I broke it
Thanks
Flash stock ROM via Odin. Download [URL="http://www.sammobile.com l" ] Sammobile [/URL]
Edit: better url
Why download a flight simulator?

Categories

Resources