Related
Ok, i just got my first scratch, never had it with SGS but here it is, and i always put it alone in my pocket.
So much advertising for what?
You didn't use a screenguard?
So do you think gorilla glass is scratch proof or just harder to scratch.
Is it deep or just the coating on top?
Suggest getting a screen protector maybe. I have one tiny scratch but could have been avoided with protection.
I remember life before gorilla glass.
Sent from my GT-I9100 using XDA App
I was using the phone for a few days after i got it without a screen protector. I knew it was gorilla glass and stuff, but something inside kept gnawing me about getting a screen protector.
Just buy a screen protector and have that mental peace.
Better safe than sorry
Gorrila baby skin
G.glass it;s just junk name for user make it more atractive.
As a user HD2 i hate gorrila non glass,Prefer no scrachtes!
Goriila glass is maybe not easy to damage but it's like baby skin!
3m with sgs2 screen glass is messy and my HD2 2y old is scretch free and never broken.
It's a ****y product and it's not for pocket!
Yep, got a tiny scratch as well out of seemingly no where.. it's definitely more fragile than my partners iPhone 4 which gets yanked in and out of her handbag daily vs my careful nurturing
certain particles will scratch gorilla glas quite easy like sand and dust . yes thats right even dust can contain quartz and sand particles both of which are hard sunstances so dust wiped on your screen while polishing can lead to scratches on the gorilla glass
info on just dust http://en.wikipedia.org/wiki/Dust and thats without pocket/bag stuff that could have collected over time , sand etc
here a user fixed his scratches to gorilla glass but it sounds risky to me
http://forum.ppcgeeks.com/moto-droid/114659-gorilla-glass-does-scratch-but-i-know-how-repair.html
another user here takes it even further and uses an abrasive by the looks of it then polishes it out after
http://forum.xda-developers.com/showthread.php?t=821129
hope you find a soloution mate i always use a screen protector just for peace of mind you can get some great ones check out the screen protector thread in the forum
have a good weekend
edit
even the iphone4 can scratch quite easily http://www.google.co.uk/search?q=ip...s=org.mozilla:en-GB:official&client=firefox-a
Well,that sucks.
Still scratch free here without protector
On milestone and droid 2 global gorila glass I never had a scratch having each one about a year and with no screen protector at all...
Maybe the cover for not having so many finger prints can make gorilla glass less "gorila" on SGS2?
Cheers
buxz777 said:
certain particles will scratch gorilla glas quite easy like sand and dust . yes thats right even dust can contain quartz and sand particles both of which are hard sunstances so dust wiped on your screen while polishing can lead to scratches on the gorilla glass
info on just dust http://en.wikipedia.org/wiki/Dust and thats without pocket/bag stuff that could have collected over time , sand etc
here a user fixed his scratches to gorilla glass but it sounds risky to me
http://forum.ppcgeeks.com/moto-droid/114659-gorilla-glass-does-scratch-but-i-know-how-repair.html
another user here takes it even further and uses an abrasive by the looks of it then polishes it out after
http://forum.xda-developers.com/showthread.php?t=821129
hope you find a soloution mate i always use a screen protector just for peace of mind you can get some great ones check out the screen protector thread in the forum
have a good weekend
edit
even the iphone4 can scratch quite easily http://www.google.co.uk/search?q=ip...s=org.mozilla:en-GB:official&client=firefox-a
Click to expand...
Click to collapse
Dammit, yesterday i went to the beach with the phone, sand may be the reason of the scratch
I already have a screen protector, but i didn't set it because there was no reason to me, now i got one
Yeah, I scratched mine too but I've kind of got used to it. It's a little annoying I guess.
Anyway, suppose it's a bit like shutting the door now the horse has bolted but might as well get a protector. Don't they change the feel of the screen though? I've always thought they might be kind of annoying.
As a user of both sgs and sgs2, I find the Gorilla glass on sgs2 to be far superior in every department
Sent from my GT-I9100 using XDA App
You folks are aware that no one ever said gorilla glass is hard as a diamond, right?
In fact, no substantial claims about it's hardness were *ever* made. It's supposed to have a better tensile strength and be less breakable, not harder.
In fact, the treatment it gets plus the oleophobic coatings and whatnot might even make it more susceptible to scratching than regular glass.
Sent from my GT-I9100 using XDA Premium App
You were one of the lucky few with your hd2. I've never seen a screen shatter so easily. I made money repairing the hd2 because it couldn't take a bump.
ecce said:
G.glass it;s just junk name for user make it more atractive.
As a user HD2 i hate gorrila non glass,Prefer no scrachtes!
Goriila glass is maybe not easy to damage but it's like baby skin!
3m with sgs2 screen glass is messy and my HD2 2y old is scretch free and never broken.
It's a ****y product and it's not for pocket!
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
intruda119 said:
You were one of the lucky few with your hd2. I've never seen a screen shatter so easily.
Click to expand...
Click to collapse
Shatter or scratch?
There IS a difference, you know.
Hardness and (tensile) strength aren't the same thing.
And they're usually inversely proportional.
Materials that have a high hardness (resistance to scratching) are usually VERY brittle.
Materials that have a high tensile strength (resistance to breaking) are usually VERY scratchable.
Well,everything is destroyable in therm of a bad usage,even this "mighty" glass.The real example is Titanic,the unsinkable ship in my a..
I also have very small scratches, there was nothing in my pocket when it happened!
My SGS was stronger, but the SGSII's screen is sweeter!
I decided to buy a brando screen protector, as far as i know they're washable
The sooner i receive my screen protector the better, im ultra careful not to have anything else in my pocket like keys or coins when then phone is there in case i do get a scratch,so far so good but after spending all that cahs on this phone it's important to get a screen protector.
This is one of the weak points with our phone, "hard"ware wise.
I also got a small scratch from putting it in my pocket without anything else. Compared I never got a protector for my old smart phone (competitor brand and os ) and only a few small scratches in some years, I was a bit disappointed.
Though, that scratch isn't that bad, and now that my protective foil arrived it can be neither seen nor felt.
But: Without the cheap foil the "feeling" was better
Still, I like my new phone
The Xperia S comes with a pre-applied shatter resistant screen protector.
Now the thing is I got a scratch on mine. Which kinda sucks. How easy is it to remove it and then replace it with a new exact same one?
I bought a pair of screen protectors. But they don't fit all around the screen like the shatter-resistant protector.
They cut out around the sensors, camera and speaker.
So. Any tips and tricks?
Screenshot of the bought screenprotectors:
http://db.tt/O2iOYjki
Well put another one like that, its almost impossible, already its a thread in here for that, how to remove it and the options for a new one
kekkle said:
The Xperia S comes with a pre-applied shatter resistant screen protector.
Now the thing is I got a scratch on mine. Which kinda sucks. How easy is it to remove it and then replace it with a new exact same one?
I bought a pair of screen protectors. But they don't fit all around the screen like the shatter-resistant protector.
They cut out around the sensors, camera and speaker.
So. Any tips and tricks?
Screenshot of the bought screenprotectors:
http://db.tt/O2iOYjki
Click to expand...
Click to collapse
That's because you're supposed to cover the anti-shatter sheet (which is not a screen protector just anti-shatter) with a screen protector that you can easily replace.
I just posted a thread in this same forum section about official Sony ones I got from Japan. But remember they are not the same as your anti-shatter sheet, you're supposed to put them on top of the anti-shatter sheet.
In terms of what they cover, they are the closest to the anti-shatter sheet as they cover all the sensors, the Sony ones just don't cover the camera and the earpiece.
If you order the Sony potector, you have two choices. You can either put it on top of the anti-shatter sheetand hope you wont be able to see the scratch anymore through this one or you can remove the anti-shatter sheet and place this one down alone. Its up to you.
I've already removed the sheet. It's now completely free of protection as I screwed up putting on the screen protector.
It's more sensitive dust and fingermarks now, but overall I'm happy. Will be placing a screen protector on it soon again when I get around to it.
Took mine off today. I seriously, repeat, seriously doubt that sheet can do ANYTHING. It peels off like regular screen protector, does not glue to the glass at all. Once you have a corner up it lasts less than a second to peel it off.
For some of you repeating what SONY want you to believe, carry on.
Sent from my LT26i using xda premium
richteralan said:
Took mine off today. I seriously, repeat, seriously doubt that sheet can do ANYTHING. It peels off like regular screen protector, does not glue to the glass at all. Once you have a corner up it lasts less than a second to peel it off.
For some of you repeating what SONY want you to believe, carry on.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
That's what I say. The screen is much better without it.
Should i remove the screen protector
I have Scractched My Sony Xperia S , and it kinds of irritates when there is more White ,, I heard and read that the factory applied screen Protector can be removed, the Question is , is it a screen Protector or a shatter Protector..
In the case i do remove it how do i clean the glass if there is any residue gum and will it affect the screen in any way... Should i Put on a New screen Protector Once i Remove the original Factory fitted one.
mrsatan said:
That's what I say. The screen is much better without it.
Click to expand...
Click to collapse
does Xperia U have the same screen shatter protector? mine is scratched in the second day, now I applied a screen protector over it
Sent from my ST25i using xda premium
Yes it is a shatter protector thick layer, I damaged mine too (Xperia P), I removed it and then applied a good quality screen protector, no residue no marks are left when the shatter protection is removed, hope this helps.
Sent from my LT22i using xda app-developers app
I had no idea the provided protectors had to go on top of the already applied one. Is it written in the manual/instructions?
Anyway, what is a good screen protector that can replace the shatter one to a good enough standard? I have scratches on mine, a rather large scuff over the front camera, making it unusable. So I suppose I could remove it and replace it with a protector?
Any recommendations?
It doesn't prevent shatter, i know that for a fact!
Sent from my LT26i using Tapatalk 2
Thats probably why it's not called a shatter preventor protector
Sent from my ST25i using xda app-developers app
How easily can the screen without the preapplied protector be scratched? Just from carrying in a jeans pocket?
Should I apply a screenprotector if I remove the original one?
Gesendet von meinem LT26i
The screen of the Xperia S is pretty scratch proof. Like really proof. The shatter-resistant protector on the other hand gets scratched in no time.
kekkle said:
The screen of the Xperia S is pretty scratch proof. Like really proof. The shatter-resistant protector on the other hand gets scratched in no time.
Click to expand...
Click to collapse
This.
Sent from my LT26i using xda premium
Yeah if I put my face up to the screen during direct sunlight I can just make out tiny scratches. Some of them are not permanent and some clearly are. The screen has been very good vs heavy scratches, but still gets light scratches like every other phone screen I have had. If you were to put a screen protector on you wouldnt even notice the scratches. Light scratches will always happen and it doesnt really bother me unless I can see them.
Edit: I did receive a free Spigen screen protector so I will try it out and see if I like it or not just for the hell of it. Generally though I prefer the naked screen and even my old hero with gorilla glass 1 came through just fine except for the minute almost imperceptible scraches.
Folks, Gorilla Glass is a marketing ploy. It doesn't offer any real scratch resistance over normal glass, but the compound it's made of makes it less likely to shatter (two different things). When it comes to scratch resistance, you're looking at the Mohs scale.
Mohs scale of mineral hardness - Wikipedia, the free encyclopedia
You may be more familiar with this than you think. Diamond is a 10, the hardest substance known to man. Diamond can only be scratched by another diamond or a laser.
Glass has a rating of 6-7, depending on the hardness of the glass. Plastic is a 3-4.
If you take your keys over a glass screen (or a glass window), touch it to the surface, and rub with a little pressure (just enough to gain a degree of resistance), you WILL NOT scratch the glass. I've even scared the crap out of someone by hacking at my Zune HD's screen with a carbon-steel steak knife, and not a scratch.
So what will cause you to scratch your glass screen? Two things;
-a softer material (like metal) and force, not resistance. Yes, if you slam something into the screen, it may very well get a small crack, small enough that we see it as a scratch. Because, while glass is very scratch resistant, it easily shatters. It's force that gives us those small "scratches."
-dirt/sand - Sand (quartz sand, specifically) is an active ingredient in glass. If you get small particles of sand or other types of dirt on the screen and then wipe it off with your shirt (or even a microfiber cloth), you can develop small scratches in your screen. The most annoying is those who wipe with a circular motion, as it leaves rings in the screen. Want to avoid this? Take a SMALL amount of Endust for Electronics and a paper towel and gently wipe off the screen. The liquid will act as a buffer between the screen and the dirt. Then, take a microfiber cloth (those little eyeglass cleaning cloths that come with screen protectors) and wipe off the residue left by the Endust and any pieces of the paper towel.
When you use a quality screen protector (SGP, Clarivu, Martin Fields), you're putting a plastic overlay over the phone. While this will scratch more easily than the glass screen, if applied correctly, it acts as a shock absorber, thus making it harder for the screen to shatter. It protects from scratches by taking the scratches itself, and it protects from shattering by absorbing the force of the blow.
The wet applications like the Invisible Shield are so thin that they don't noticeably increase shatter resistance. They'll just keep the screen together when shattered. The Invisible Shield is harder to scratch though, making it so that you don't have to replace it as often (it looks nicer longer than a normal plastic screen protector). Basically, it protects from scratches by deflecting them, but doesn't offer any real shock absorption.
Gorilla glass claims a hardness of 9 on Mohs scale which is utter bs. It realistically has a hardness of about 7-7.5 max. Normal glass can range from 6-7.2 depending on the type. Diamond is 10 and Sapphire is 9 which is what the make high end watch faces out of but is damn expensive. If Gorilla Glass was a 9 then they would use it for the watch faces since it is much much cheaper. I have a Citizen watch that has sapphire and the face is scratched as **** because I have had it for 12 years.
Remember as long as the scratches are the insanely small type caused by sand grains and such, you can easily get some special polish and buff those right out. The one nice thing about our screens not having oleophobic coating is you dont have to worry about damaging the coating when you polish it.
The best way for a manufacturer to reduce scratches is to put a chin on the phone like the Hero had. This way the phone screen never touches the ground.
When I got the phone I thought that the phone had one screen protector installed and that the other one in the packge was spare. How wrong I was. Now the shatter-resistant protector is full of small scrathes, even tough I haven't had keys or anything else on the same pocket. I've had the phone for about three months now.
I ordered Martin Shields few days ago, and I'm going to replave the shatter-resistant protector with that.
I had Wrapsol on my Galaxy Note and was pretty satisfied with it, but unfortunately they don't make one for P. My wife has Zagg on her Galaxy S, but it's bit too stick for my taste.
I put a screen protector on today to test it with one and it was on for all of 30 seconds before I tore it off. I just cant stand the things. Perfect thing for me would be a fold over case but as I use my left hand for the phone, they all fold the wrong way.
The phone was completely unusable for me after removing the shatter protection. The glass itself is a sticky mess, even after wiping of the goo left from the shatter protection, fingerprints and dust stick like crazy and is a real chore to clean.
I bought a Steinhall crystal clear film and the phone is now smooooooth as butter. I absolutely love it.
revan17 said:
The phone was completely unusable for me after removing the shatter protection. The glass itself is a sticky mess, even after wiping of the goo left from the shatter protection, fingerprints and dust stick like crazy and is a real chore to clean.
I bought a Steinhall crystal clear film and the phone is now smooooooth as butter. I absolutely love it.
Click to expand...
Click to collapse
It gets better after a while. Mine is nice and smooth. I got a free spigen clear with my case but it didn't feel as good as bare glass.
Sent from hell using Xperia-S(atan)
---------- Post added at 12:59 AM ---------- Previous post was at 12:58 AM ----------
I can't stand the edge it adds by the bar on the bottom.
Sent from hell using Xperia-S(atan)
While I'm sure everyone is aware of the difficulties in scratching a Gorilla Glass scratches, I have recently discovered the keyboard dock's ability to hold pieces of sand nightly on the glass. Because it is not the tightest joint, the wiggling leads to scratches. Like the tiny one I now have.
TL;DR: Be sure to clean the keyboard dock joint DAILY to prevent scratches.
Parastie said:
While I'm sure everyone is aware of the difficulties in scratching a Gorilla Glass scratches, I have recently discovered the keyboard dock's ability to hold pieces of sand nightly on the glass. Because it is not the tightest joint, the wiggling leads to scratches. Like the tiny one I now have.
TL;DR: Be sure to clean the keyboard dock joint DAILY to prevent scratches.
Click to expand...
Click to collapse
Its no secret GG doesnt scratch with metal from keys or blades because the glass is harder than the blade. It WILL, however, be abraised by sand or even gritty dust. (Dont think sand box, think pocket lint or random dust like what might be picked up from every day uses)
How many times must it be said? your screen is not indistructable. Use a screen protector, be cautious of where things move against it.
pileot said:
Its no secret GG doesnt scratch with metal from keys or blades because the glass is harder than the blade. It WILL, however, be abraised by sand or even gritty dust. (Dont think sand box, think pocket lint or random dust like what might be picked up from every day uses)
How many times must it be said? your screen is not indistructable. Use a screen protector, be cautious of where things move against it.
Click to expand...
Click to collapse
then explain how my SGSII with the same gorilla glass has 0 scratches on it and I have had it longer with no screen protector and use it daily in my pocket, in the car thrown around compared to my prime that scratches when you practically blow on it?
the gorilla glass on the prime stinks compared to other devices, its like they cheaped out and either didn't coat the glass or coated it too lightly to save money.
nextelbuddy said:
then explain how my SGSII with the same gorilla glass has 0 scratches on it and I have had it longer with no screen protector and use it daily in my pocket, in the car thrown around compared to my prime that scratches when you practically blow on it?
the gorilla glass on the prime stinks compared to other devices, its like they cheaped out and either didn't coat the glass or coated it too lightly to save money.
Click to expand...
Click to collapse
Yeah, because the Prime uses a cheaper version of Gorilla glass , right....
nextelbuddy said:
then explain how my SGSII with the same gorilla glass has 0 scratches on it and I have had it longer with no screen protector and use it daily in my pocket, in the car thrown around compared to my prime that scratches when you practically blow on it?
the gorilla glass on the prime stinks compared to other devices, its like they cheaped out and either didn't coat the glass or coated it too lightly to save money.
Click to expand...
Click to collapse
No, I don't think it stinks. You take your SGII and place a piece of sand on it with a sheet of metal holding the sand to the glass. Now, move the metal bank and forth for about 5 minutes (remember to use light pressure) in a spot about 1mm in diameter. Now tell me if you get a scratch. I'll bet you do, and that's what happens when you have sand in the dock socket.
So i have read rants on the Z1 having self breaking glass, and alittle on the ultra. Most of the threads on the ultra though have been, slight to moderate abuse (sat on)(backpack of stuff) causing breaks. Not the classic Z1 of "took phone out of front pocket". My normal routine is only having the phone in my front pocket when going from my desk to the car. Other than that its on my desk or left in my car (i hate walking around with a phone in my pants).
Mines coming this week and i kinda want to take some preventive steps, and wondering if sony really is replacing "not blown to bits" screens under warranty in at least the USA.
I hear it comes with a factory "screen protector" that you should leave on, and put another screen protector on top of it. Is that true or is the factory protector just the stock "tabbed" film that should be removed right after opening the box? I have a front/back screen protector coming, but wanted to know if i should peel off the factory one first.
nightanole said:
So i have read rants on the Z1 having self breaking glass, and alittle on the ultra. Most of the threads on the ultra though have been, slight to moderate abuse (sat on)(backpack of stuff) causing breaks. Not the classic Z1 of "took phone out of front pocket". My normal routine is only having the phone in my front pocket when going from my desk to the car. Other than that its on my desk or left in my car (i hate walking around with a phone in my pants).
Mines coming this week and i kinda want to take some preventive steps, and wondering if sony really is replacing "not blown to bits" screens under warranty in at least the USA.
I hear it comes with a factory "screen protector" that you should leave on, and put another screen protector on top of it. Is that true or is the factory protector just the stock "tabbed" film that should be removed right after opening the box? I have a front/back screen protector coming, but wanted to know if i should peel off the factory one first.
Click to expand...
Click to collapse
one year in, and no glass breaking
your routine won't break the phone, i'm sure
screen protector, i have one on top of the anti shatter film provided with the phone, both front and back, and both scratched to hell, but too lazy to replace
Definitely put a aftermarket screen protector over the anti shatter film. The ASF is too soft, but is a pain in the arse to remove by all accounts
I've had my ZU for about 9 months now and have dropped it 3 times onto concrete, once without any screen proctor or case, the other two times has been with a wallet/flip case. The last time I dropped it the case even broke - still the screen is intact.
I too thought it wont happen to mine, till it really did, of course it's not self breaking glass for no reason, but more likely the most logical reason I could think of is, the stress accumulated from the daily use, a bit of pressure while in pocket, or backpack, along with the heat / cold temperature, whatever other bull crap from regular use, over a period of time, that stress cause the glass to be broken.
I pretty much babied my Z Ultra, have back casing, Glass M on the front, Skinomi on the back, never dropped, all in like new condition. Then last Sunday I was on my bike ride, put it inside my backpack, along with my wallet, then couple hours later, took it out from my backpack only to find the glass, under the M Glass screen protector, under the original ASF, has a hairline crack, and pretty much as good as brick, since it wont register any touch, I can see a call coming in, but cant answer it since the display doesnt work.
OP said it happens with Z1, I read that it happens with Z2, and it happens with my Z Ultra, so I think it's just something on their glass quality along with their full glass design, it is impacting a small number of them, not all, just small number, but still the problem indeed does exists.
But I still buy another Z Ultra in a heart beat without much thinking, as a matter of fact already got another one from expensys, with the price is so cheap now, the smoothness, the crisp display, the waterproofness, it still worth every penny.
Mine broke in the pocket, and so did others.
It can break. But with that said, the risk yours will break in the pocket with no abuse is small.
Sony aren't very consistent in handling these cases. Sometimes they get it fixed on warranty, sometimes they're not. But if you get a first negative answer just send in a complaint and they might turn around (as in my case).
I just got mine back. I had the asf removed on the previous one, I'm not taking it off now. And I'm doubling up with tempered glass protectors.
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
boystuff said:
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
Click to expand...
Click to collapse
There is so much wrong with this post.
boystuff said:
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
Click to expand...
Click to collapse
i live right on the equator, and have not had any problems with this (i also use a screen protector on top of the antishatter film). do you mean to say by removing the anti-shatter film, the glass doesn't pick up any fingerprints and oil? a screen can only be oleophobic for so long.
To those who have had the screen crack in their pockets: were you using a hard case to provide rigidity to the device?
I also just received a Z Ultra and read through the massive threads on Sony's forums on these problems. It just seems the device is so thin it has too much flex in the pocket. I'm even hesitant to use the leather flipstyle case if it doesn'tt provide enough rigidity.
I'm thinking maybe the aluminum bumper case with GlassM protectors on both sides would work nicely together. Hopefully the aluminum won't degrade the signal quality too harshly.
luceri84 said:
To those who have had the screen crack in their pockets: were you using a hard case to provide rigidity to the device?
I also just received a Z Ultra and read through the massive threads on Sony's forums on these problems. It just seems the device is so thin it has too much flex in the pocket. I'm even hesitant to use the leather flipstyle case if it doesn'tt provide enough rigidity.
I'm thinking maybe the aluminum bumper case with GlassM protectors on both sides would work nicely together. Hopefully the aluminum won't degrade the signal quality too harshly.
Click to expand...
Click to collapse
Those hair thin aluminum bumper cases wont do squat, the thick glassM m shields wont do squat. The device is just too long and think. Your best bet is to treat it like a full size tablet. Dont sit with it in your pocket, dont put it in your bag without being in a separate compartment. The poor thing is like 1/4" thick and made out of aluminum and glass. I still dont know why they choose this glass. I can take my droid incredible with gorilla glass and pound the screen on the corner of a desk over and over, no scratches. This sony phone just doesnt have any flex for the glass.
I just through an iLLumiShield on the front and back so i can throw it on the table and not worry about scratches.
nightanole said:
Those hair thin aluminum bumper cases wont do squat, the thick glassM m shields wont do squat. The device is just too long and think. Your best bet is to treat it like a full size tablet. Dont sit with it in your pocket, dont put it in your bag without being in a separate compartment. The poor thing is like 1/4" thick and made out of aluminum and glass. I still dont know why they choose this glass. I can take my droid incredible with gorilla glass and pound the screen on the corner of a desk over and over, no scratches. This sony phone just doesnt have any flex for the glass.
I just through an iLLumiShield on the front and back so i can throw it on the table and not worry about scratches.
Click to expand...
Click to collapse
But if flex is the issue then wouldn't a solid metal frame that doesn't bend around the perimeter of the phone rectify such concern?
luceri84 said:
But if flex is the issue then wouldn't a solid metal frame that doesn't bend around the perimeter of the phone rectify such concern?
Click to expand...
Click to collapse
Yes but the aluminum bumper case is very flimsy stamped aluminum. You would need something with zero give like aircraft grade. An aluminum or plastic shell would be the way to go, but That bumper case is just to prevent chiping of the sides, and give a mm lip when laying the phone on its front/back.
I just use a rubber back cover and THAT'S IT. No problems for me. And yes i keep it in my jeans' pocket most of the time. It does hinder my movement a little though
Sent from my C6802 using XDA Premium 4 mobile app
The better way to deal with the size is not to put in jeans pocket. In winter, jacket pockets I guess are ok. In summer, I guess the best way would be to buy a camera bag or something for this. I think that would solve this problem.
I just got the phone and I am kinda surprised to see how thin it is. Definitely not a phone you should stress too much.
Hey guys it's my first post on XDA. I hope this will be helpful for people who are looking for a full coverage screen protector for their brand new Galaxy S7.
First of all, as you all know that the S7 screen has an even worse curve than the S6. Therefore, it has been a nightmare for me to find a screen protector that covers the whole screen without lifting on the edges. ( major OCD User)
I got tired of tempered glass and PET cuz they don't cover the full screen or don't fully stick on the edges so I decided to go with TPU.
i-croo Screen protectors are flexible TPU material that will curve with your screen and stick completely no matter how curvy the edge of the screen is. The cut outs are extremely precise and coverage is great ( i would say about 98% of the screen). The clarity is supered ( tried Yootech S P which cover the whole screen but makes screen looks grainy and has rainbow effect). You can't even tell there is a screen protector on unless u pay very close attention. These screen protectors provide much better protection against scratches or drop compared to PET.
The screen protectors comes with everything you would find with other screen protectors. However, these come with an installation tool ( which i did not use cuz i prefer not having too much stuff near the phone that has dust particles which can be attract by the static charge when you peel the screen protector off), but it think it might be helpful for those who are not skilled at aligning screen protector. The best part is it is a dry installation so you can use dust removal sticker to get rid of dust particle if there is any under the screen. ( Can't tell you how much i hate wet installation which collects tons of dust and fingerprints). In addition, they are very thoughtful and included a hard squeegee that is cover with cloth tape so you would not scratch your screen protector.
The reviews of these on Amazon are not great but trust me this is the best solution for now until they can make curved tempered glass that fully adhere and not just the outside edge like Coral Glass). It works great with Ringke slim case ( will update with 3 more cases soon: Spigen rugged, BLIQ Flex Pro Espresso, and VRS Design-High Pro Shield )
In summary.
PROs:
- Prefect fit, full coverage
- Extremely clear ( almost invisible)
- Fully stick
- better protection than PET
- Dry installation
- thoughtful presentation
Cons.
-might be hard for some to install
- little bit hard to peel off ( tip: use a small dust removal sticker to hold the corner of the screen protector as you peel it off to prevent getting fingerprint under it, also makes it much easier to peel)
- not sure if it will work with all cases
OCD user score ( 4.5/5)
PS: I think it better to get these protectors without the Installation tool if you're skilled at installing them, save a dollar
I cant post images links due to having less than 10 post, you can see the images from my amazon review under Thetechnerd. It would be great if someone can help me post the images here ( plz pm me)
PLz search B01D0XEF3Q from Amazon search box. Thanks all
Here's the link http://www.amazon.com/Galaxy-Protec...01D0XEF3Q/ref=cm_cr_arp_d_product_top?ie=UTF8
Some reviews have been saying that it scratches really easily. Also does it attract fingerprints/oil easily? Thanks
I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.
Jasonjk said:
I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.
Click to expand...
Click to collapse
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?
sunrat39 said:
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?
Click to expand...
Click to collapse
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app
dzaster89 said:
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk
sunrat39 said:
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
So I installed the screen protector yesterday and first of all I have to say it is a great fit. This is truly an edge to edge protector. Went on fairly easy, let it dry over night and I see no bubbles or peeling. As far as the material goes I'd say it's somewhere in between PET and those self healing films. This particular one is very clear with a small amount of texture (sticky feel), and under some lighting there is a slight rainbow effect. I'm used to glass screen protectors but this is a great compromise unless your willing to pay $30 for the full coverage ones. I'm also pretty picky about what goes on my phone and I honest give this a 5/5 for quality and price.
Sent from my SM-G930T using XDA-Developers mobile app
Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk
sunrat39 said:
Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
I had some weird stuff going on after the install but as it dried up it slowly went away. I install paint protection films on cars and this is very similar. Usually I let my customers know it takes about 2 days to fully dry, so hopefully yours is still in the drying phase.
I could not agree more though that damn halo effect on the regular protectors just kills the beauty of the phone.
Sent from my SM-G930T using XDA-Developers mobile app
Wait drying?
Mine was a dry install. Did you use liquid anyway?
Sent from my SM-G930V using Tapatalk
I guess I forgot to mention that. Lol I did mine as a wet install, figured it would be cleaner.
Sent from my SM-G930T using XDA-Developers mobile app
I'm probably going to return mine. The edges keep lifting with my spigen rugged protector.
Sent from my SM-G930V using Tapatalk
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?
Has anyone tried this screen protector with the Tech21 Frame case?
sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
km8j said:
What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?
Click to expand...
Click to collapse
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
sanjay228 said:
Has anyone tried this screen protector with the Tech21 Frame case?
Click to expand...
Click to collapse
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app
sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
lol don't do wet install cuz it freaking sucks. I recorded how I install my, will edit and post it soon. This is not even 30% as difficult as the G-color GS7 back protector, hell my skills are no joke and I had to give up on that one cuz it's literally impossible to install it without bubble.
Would it be the same http://www.ebay.com/itm/icroo-1-1-3...hash=item4d42230422:m:mh6L4r4ScGVKkUqkvj8WDEg ?
UPDATE:
I just scroll the page and seams to be it is the same.
dzaster89 said:
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Alright I am gonna give the wet install a shot.
What was your dilution with soap and water? Just a drop in a cup of water and mix it around? Did you use a sprayer or just use your hands?
Be careful with the soapy water. Soap lowers the surface tension of water and can get into the phone. Read that someone washed their phone and ruined it because of the soap.