i-Croo edge to edge TPU Screen protectors (OCD Approved) - Samsung Galaxy S7 Accessories

Hey guys it's my first post on XDA. I hope this will be helpful for people who are looking for a full coverage screen protector for their brand new Galaxy S7.
First of all, as you all know that the S7 screen has an even worse curve than the S6. Therefore, it has been a nightmare for me to find a screen protector that covers the whole screen without lifting on the edges. ( major OCD User)
I got tired of tempered glass and PET cuz they don't cover the full screen or don't fully stick on the edges so I decided to go with TPU.
i-croo Screen protectors are flexible TPU material that will curve with your screen and stick completely no matter how curvy the edge of the screen is. The cut outs are extremely precise and coverage is great ( i would say about 98% of the screen). The clarity is supered ( tried Yootech S P which cover the whole screen but makes screen looks grainy and has rainbow effect). You can't even tell there is a screen protector on unless u pay very close attention. These screen protectors provide much better protection against scratches or drop compared to PET.
The screen protectors comes with everything you would find with other screen protectors. However, these come with an installation tool ( which i did not use cuz i prefer not having too much stuff near the phone that has dust particles which can be attract by the static charge when you peel the screen protector off), but it think it might be helpful for those who are not skilled at aligning screen protector. The best part is it is a dry installation so you can use dust removal sticker to get rid of dust particle if there is any under the screen. ( Can't tell you how much i hate wet installation which collects tons of dust and fingerprints). In addition, they are very thoughtful and included a hard squeegee that is cover with cloth tape so you would not scratch your screen protector.
The reviews of these on Amazon are not great but trust me this is the best solution for now until they can make curved tempered glass that fully adhere and not just the outside edge like Coral Glass). It works great with Ringke slim case ( will update with 3 more cases soon: Spigen rugged, BLIQ Flex Pro Espresso, and VRS Design-High Pro Shield )
In summary.
PROs:
- Prefect fit, full coverage
- Extremely clear ( almost invisible)
- Fully stick
- better protection than PET
- Dry installation
- thoughtful presentation
Cons.
-might be hard for some to install
- little bit hard to peel off ( tip: use a small dust removal sticker to hold the corner of the screen protector as you peel it off to prevent getting fingerprint under it, also makes it much easier to peel)
- not sure if it will work with all cases
OCD user score ( 4.5/5)
PS: I think it better to get these protectors without the Installation tool if you're skilled at installing them, save a dollar
I cant post images links due to having less than 10 post, you can see the images from my amazon review under Thetechnerd. It would be great if someone can help me post the images here ( plz pm me)
PLz search B01D0XEF3Q from Amazon search box. Thanks all

Here's the link http://www.amazon.com/Galaxy-Protec...01D0XEF3Q/ref=cm_cr_arp_d_product_top?ie=UTF8
Some reviews have been saying that it scratches really easily. Also does it attract fingerprints/oil easily? Thanks

I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.

Jasonjk said:
I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.
Click to expand...
Click to collapse
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?

sunrat39 said:
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?
Click to expand...
Click to collapse
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app

dzaster89 said:
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk

sunrat39 said:
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
So I installed the screen protector yesterday and first of all I have to say it is a great fit. This is truly an edge to edge protector. Went on fairly easy, let it dry over night and I see no bubbles or peeling. As far as the material goes I'd say it's somewhere in between PET and those self healing films. This particular one is very clear with a small amount of texture (sticky feel), and under some lighting there is a slight rainbow effect. I'm used to glass screen protectors but this is a great compromise unless your willing to pay $30 for the full coverage ones. I'm also pretty picky about what goes on my phone and I honest give this a 5/5 for quality and price.
Sent from my SM-G930T using XDA-Developers mobile app

Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk

sunrat39 said:
Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
I had some weird stuff going on after the install but as it dried up it slowly went away. I install paint protection films on cars and this is very similar. Usually I let my customers know it takes about 2 days to fully dry, so hopefully yours is still in the drying phase.
I could not agree more though that damn halo effect on the regular protectors just kills the beauty of the phone.
Sent from my SM-G930T using XDA-Developers mobile app

Wait drying?
Mine was a dry install. Did you use liquid anyway?
Sent from my SM-G930V using Tapatalk

I guess I forgot to mention that. Lol I did mine as a wet install, figured it would be cleaner.
Sent from my SM-G930T using XDA-Developers mobile app

I'm probably going to return mine. The edges keep lifting with my spigen rugged protector.
Sent from my SM-G930V using Tapatalk

Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?

What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?

Has anyone tried this screen protector with the Tech21 Frame case?

sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
km8j said:
What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?
Click to expand...
Click to collapse
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
sanjay228 said:
Has anyone tried this screen protector with the Tech21 Frame case?
Click to expand...
Click to collapse
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app

sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
lol don't do wet install cuz it freaking sucks. I recorded how I install my, will edit and post it soon. This is not even 30% as difficult as the G-color GS7 back protector, hell my skills are no joke and I had to give up on that one cuz it's literally impossible to install it without bubble.

Would it be the same http://www.ebay.com/itm/icroo-1-1-3...hash=item4d42230422:m:mh6L4r4ScGVKkUqkvj8WDEg ?
UPDATE:
I just scroll the page and seams to be it is the same.

dzaster89 said:
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Alright I am gonna give the wet install a shot.
What was your dilution with soap and water? Just a drop in a cup of water and mix it around? Did you use a sprayer or just use your hands?

Be careful with the soapy water. Soap lowers the surface tension of water and can get into the phone. Read that someone washed their phone and ruined it because of the soap.

Related

Steinheil Ultra Fine Screen Protector

I'm disappointed with the grainy look of the Moshi iVisor AG and I want to get a Steinheil.
Would this be a good price?
http://item.mobileweb.ebay.com/viewitem?itemId=290624068662&index=17&nav=SEARCH&nid=04730414206
I just saw it on eBay and wondering if someone else will buy it first.
Sent from my SAMSUNG-SGH-I777 using xda premium
I am pretty sure I bought mine from Amazon which saved me a few bucks on shipping. I highly recommend this product. It is clear and pretty smooth. In retrospect, I may get the oleophobic version next.
I got the Oleophobic version the other day. Ordered from Amazon to save on shipping since I'm a Prime member. Absolutely love this protector. You can't even tell that its on the phone unless you look closely at it. Its smooth, clear, no rainbow affect, finger prints hardly show and if they do wipe away with ease. Great protector. One side note, they send you two in the package. Nice surprise...
In my opinion, Steinheil makes the best screen protector on the market. I've been using them for years on all my devices.
jm1280 said:
I got the Oleophobic version the other day. Ordered from Amazon to save on shipping since I'm a Prime member. Absolutely love this protector. You can't even tell that its on the phone unless you look closely at it. Its smooth, clear, no rainbow affect, finger prints hardly show and if they do wipe away with ease. Great protector. One side note, they send you two in the package. Nice surprise...
Click to expand...
Click to collapse
Do you know if the Oleophobic has the same clarity as the Ultra Clear? I dont want to get anything that will cloud the screen.
It's a great screen protector, I bought the Oleophobic version and you cannot tell that it's even there.
Using the Oleophobic.
Noticeably more friction than the stock screen.
Does appear to make finger oils more apparent than stock screen.
Easy to wipe off.
Does cover the Front facing camera and sensor ports.
I highly suspect the protector would affect front camera performance, although I have not checked this.
Cutout for the earpiece only.
Two pieces in the package, with cloth and scraper. No alcohol wipes.
As always, apply in a clean, dust-free environment.
I'd call it above average.
tboooe said:
Do you know if the Oleophobic has the same clarity as the Ultra Clear? I dont want to get anything that will cloud the screen.
Click to expand...
Click to collapse
I am using the Ultra Crystal Clear and I am very happy with it. It did not affect the clarity of the screen before and after installing it. I chose it for the clarity and for the scratch protection.
Unless someone has used or installed both versions on their phone, I think it will hard to judge what is better in terms of clarity. HTH.
Quotes from the SGP web site :
(Sorry I can't still post URL, so if you go to their sgpstore.com site and under cell phone > Samsung SGS2 AT&T)
Ultra Crystal and Ultra Oleophobic screen protectors are both clear type where it absolutely doesn't affect the screen image quality.
Ultra Crystal has glass-like surface coating with the best resistance against scratches.
Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants.
Ultra Crystal : Ultimate Clarity
• Ultra Crystal : 25% Thicker than previous model
• Hard coated for Scratches and Scuffs Proof
• High Quality Optical Enhancement Film
• Ultimate Clarity surface hardness : 4H
Ultra Oleophobic : Oil-Resistance
• Oleophobic coating : Oil-resistance coating
• it protects from staining of oils, cosmetics and other contaminations
• High Quality Optical Enhancement Film
• Good Surface Hardness : 3H
---------- Post added 1st November 2011 at 12:10 AM ---------- Previous post was 31st October 2011 at 11:58 PM ----------
xAnimal5 said:
I'm disappointed with the grainy look of the Moshi iVisor AG and I want to get a Steinheil.
Click to expand...
Click to collapse
I agree with you on the grainy aspect of the Moshi iVisor screen protector.
I was almost going to purchase it at the AT&T store when two of the AT&T sales guys showed me their Infuse phones one with the iVisor installed and one without. And that's when I decided to go with Steinheil instead. The iVisor on that phone made his screen so matte or so grainy.
Obviously the iVisor has other advantages (scratch resistant, reusable) but not the clarity one for me.
I'm looking to get a screen protector for my galaxy s2 as well. i've heard a lot of horror stories with screen protectors and leaving residue/ruining the screen so I'm a little hesitant in choosing one.
I know this phone has gorilla glass but it never hurt to protect it.
Is the ultra oleophobic worth the 13.99? Can someone confirm the front-facing camera quality since the protector covers it?
Or should i settle for those $1-3 ones on ebay?
just-another said:
I'm looking to get a screen protector for my galaxy s2 as well. i've heard a lot of horror stories with screen protectors and leaving residue/ruining the screen so I'm a little hesitant in choosing one.
I know this phone has gorilla glass but it never hurt to protect it.
Is the ultra oleophobic worth the 13.99? Can someone confirm the front-facing camera quality since the protector covers it?
Or should i settle for those $1-3 ones on ebay?
Click to expand...
Click to collapse
I just got my olephobic, it's well worth the $14. Front facing cam is not affected by it, picture quality is beautiful. It blocks oils, so you can easily wipe them off, for that fresh feeling.
Sent from my SAMSUNG-SGH-I777 using xda premium
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
joewoo said:
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
Click to expand...
Click to collapse
Same here, the screen protector is so smooth that it's like a lint magnet lol.
Sent from my SAMSUNG-SGH-I777 using xda premium
I use sgp screen protectors on all of my devices and i love them. I have tried all of them but the only one that i use and wikll ever use on this device is the ultra crystal because its the only one that doesnt take away from the shininess of this screen. The screen on this phone is by far the best on the market so i want to keep it that way.
Well I guess the comments answer my questions. I'm not too worried about protection, but just want something that will show less fingerprints.
Im planning to get the oleophobic one aswell but I had a question about if I should use this screen protector that came with this gel case I purchased off eBay. the case is nice and all and it came with an ordinary protector, but because I've never applied a screen protector on any phone before - I was wondering should i apply it? I'm very obsessive about the screen on my galaxy s2 and don't know if removing a screen protector incase i dont like it will damage the screen or anything? there is no adhesive or other solution that came with it, its one of those that u just apply it on after removing covers on both sides
just-another said:
Im planning to get the oleophobic one aswell but I had a question about if I should use this screen protector that came with this gel case I purchased off eBay. the case is nice and all and it came with an ordinary protector, but because I've never applied a screen protector on any phone before - I was wondering should i apply it? I'm very obsessive about the screen on my galaxy s2 and don't know if removing a screen protector incase i dont like it will damage the screen or anything? there is no adhesive or other solution that came with it, its one of those that u just apply it on after removing covers on both sides
Click to expand...
Click to collapse
It should be fine, and you should use the one you got with your case for practice before putting on the steinheil one, I wish I did. After using both steinheil protectors, I put on the ebay one perfect, wish it was the other way around, lol.
joewoo said:
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
Click to expand...
Click to collapse
I fill you,,, same here it is a dust magnet.
soldiersinx said:
It should be fine, and you should use the one you got with your case for practice before putting on the steinheil one, I wish I did. After using both steinheil protectors, I put on the ebay one perfect, wish it was the other way around, lol.
Click to expand...
Click to collapse
Will do, and are there any problems when removing them? I don't want to start digging at the edges with my nails or anything or do they come right off easily? I've heard tape is helpful?
just-another said:
Will do, and are there any problems when removing them? I don't want to start digging at the edges with my nails or anything or do they come right off easily? I've heard tape is helpful?
Click to expand...
Click to collapse
Yeah, scotch tape works pretty well, even just to remove a little bit of the edge
steinheil works great for me, most people can't even tell its there. though I did screw up with the first one but they send two so hopefully it takes less tries than that[COLOR="Silver

[Q] Screen Protectors for Xperia Z Ultra

I am looking to find the most high quality option when it comes to screen protectors for the Ultra.
I have tried the Muvit protector - but it isn't the best quality I've seen - and it got a little scratch in the application process.
I was wondering if anyone has tried the Stealth Extreme R from Armorz without having first taken off the shatter proof film?
Wondering how it fits on the device, how it affects the weight - and generally how high quality the protector actually is and if it is worth the extra $50.
I am not interested in trying to remove the shatter proof film after reading people's experiences.
Not sure if it'll help you, but there are quite a number of "reviews" on it on Youtube.
hassanmahmood said:
I am looking to find the most high quality option when it comes to screen protectors for the Ultra.
I have tried the Muvit protector - but it isn't the best quality I've seen - and it got a little scratch in the application process.
I was wondering if anyone has tried the Stealth Extreme R from Armorz without having first taken off the shatter proof film?
Wondering how it fits on the device, how it affects the weight - and generally how high quality the protector actually is and if it is worth the extra $50.
I am not interested in trying to remove the shatter proof film after reading people's experiences.
Click to expand...
Click to collapse
I have the Armorz Stealth Extreme R tempered glass protector. Its actually pretty good quality. If you have never put on a glass screen protector before, it might be a little tricky. I put mine on without water, and paid the price when trying to reposition it. the bottom corner is lifted from when i tried to pry it up and move it. I did apply a back glass using the water method, and it took longer to get the bubbles completely out, but came out pretty clean.
I did not remove the anti shatter film on either side, and have not seen any loss in touch sensitivity.
one thing i did notice is that, it added a little bit of weight, but also gave the phone better rigidity when used without the case. some people have mentioned the phone twisting in their pocket, and i have yet to experience any twisting whats so ever.
not sure if the price has gone up, but i ordered mine for 39$ on amazon. hope this helps.
ij0rgei said:
I have the Armorz Stealth Extreme R tempered glass protector. Its actually pretty good quality. If you have never put on a glass screen protector before, it might be a little tricky. I put mine on without water, and paid the price when trying to reposition it. the bottom corner is lifted from when i tried to pry it up and move it. I did apply a back glass using the water method, and it took longer to get the bubbles completely out, but came out pretty clean.
I did not remove the anti shatter film on either side, and have not seen any loss in touch sensitivity.
one thing i did notice is that, it added a little bit of weight, but also gave the phone better rigidity when used without the case. some people have mentioned the phone twisting in their pocket, and i have yet to experience any twisting whats so ever.
not sure if the price has gone up, but i ordered mine for 39$ on amazon. hope this helps.
Click to expand...
Click to collapse
Thanks a lot for the insight!
So why do you think doing it dry caused a problem? Is the adhesive very strong? I figured it would just pull right off.
Do you have any bubbles or blemishes on the front?
hassanmahmood said:
Thanks a lot for the insight!
So why do you think doing it dry caused a problem? Is the adhesive very strong? I figured it would just pull right off.
Do you have any bubbles or blemishes on the front?
Click to expand...
Click to collapse
it's a silicone based adhesive. peels off fairly easy but keeps a strong bond. when I pryed the corner up, I pushed part of the adhesive so it clumped up and now won't lay flat. if you spray it down with water, you'll be able to slide it into place with out having to lift.
it looks like a large are in the picture but it really isn't noticeable. the backside went on with water without any issues. sucks that the back glass cost me 13$ and the front cost me 3 times that much only to have that messed up corner. you live and you learn. Lol
Sent from my C6833 using xda app-developers app
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
cavallino33 said:
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
Click to expand...
Click to collapse
... Is that crap made out of Gorilla glass? Good god, that's a screen protector. None of this "Clear film" BS where if there's an Airbubble you just ruined a purchase, oh no, this is quite literally just another screen slapped on top.
What does it do to the thickness of the thing? My concern mainly is with cases like Sony's Battery case that kind of only work with just exactly how thick it is.
Not sure if it's really gorilla glass but no scratches so far from things that would scratch plastic protectors. It is pretty thin I can't say for the case but its under 1mm thick.
Does anyone know this?
http://www.ebay.co.uk/itm/2x-Vikuiti-ARMR220-Displayfolie-Schutzfolie-Sony-Xperia-Z-Ultra-/380784800524?pt=DE_Handy_PDA_Displayschutzfolien&hash=item58a88af30c
There is others references from this brand...
Vikuiti DQCM30
Vikuiti ADQC27
Vikuiti DQC160
Vikuiti ARMR220
I'm tempted to buy ...
Not sure if it's been discussed here before but I just applied the most amazing screen protector I've ever use on any phone. It's called ILLumiShield and they sell it on Amazon and eBay for a reasonable price and is absolutely fantastic it's so easy to put on bubble free, feels like glass even over the the crap protector Sony puts on. I highly recommended and no I don't work for them hehe
Sent from my C6833 using Tapatalk
Shook187:
Sound nice. One more question: haven't you feel after applied your scr.prot. like whole screen sometimes respond not as exactly as you wish, have you? With my scr.prot. I sometimes get unwanted behavior... Like two fingers tap even if I use only one... Or tap without reaction... Or tap evean I did not do it, self-tap... It happens once a day, maybe two, but it is very annoing... Without scr.prot. it works perfect. I thing I would follow by your adwice, only need your opinion about that not-funny behaviors. Thx
Tapatalked from C6833
FRM300 said:
Shook187:
Sound nice. One more question: haven't you feel after applied your scr.prot. like whole screen sometimes respond not as exactly as you wish, have you? With my scr.prot. I sometimes get unwanted behavior... Like two fingers tap even if I use only one... Or tap without reaction... Or tap evean I did not do it, self-tap... It happens once a day, maybe two, but it is very annoing... Without scr.prot. it works perfect. I thing I would follow by your adwice, only need your opinion about that not-funny behaviors. Thx
Tapatalked from C6833
Click to expand...
Click to collapse
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
shook187 said:
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Turned off vibrate on touch and it seems a bit more more responsive in some areas, even though it probably is placebo. I have an iShieldz screen protector (similar to Zagg) and noticed that it wouldn't respond when I tap the screen sometimes. Though, I think that's the way I tap the screen, edge of finger vs finger.
Sent from my C6806 using xda app-developers app
shook187 said:
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Ok. Thanks for answer. One more: I see there are 3 different ILLumiShields: matte, cristal clear and blue light. Which one you recomend? Or which one you have and recomend?
Tapatalked from C6833
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
S.D.Richards said:
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
Click to expand...
Click to collapse
One for you, one for your wife and one for her mother!
Tapatalked from C6833
FRM300 said:
Ok. Thanks for answer. One more: I see there are 3 different ILLumiShields: matte, cristal clear and blue light. Which one you recomend? Or which one you have and recomend?
Tapatalked from C6833
Click to expand...
Click to collapse
I bought the crystal clear one
Sent from my C6833 using xda app-developers app
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
S.D.Richards said:
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
Click to expand...
Click to collapse
I don't over think on something I paid $14 for
Sent from my C6833 using xda app-developers app
cavallino33 said:
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
Click to expand...
Click to collapse
Thanks for the tip. Just bought one. Been wanting a protection like that for my phone ever since removing the factory protector. The phone is a fingerprint magnet without the ASF. However found it for $16 and free shipping to Sweden (only front protection though, don't need it for the back).
http://www.aliexpress.com/item/Xper...otector-For-Sony-XL39h-Xperia/1478547885.html
I applied Glass-M screen protectors on both the front and back of my phone yesterday, and have been very happy with it so far. It's added a little weight, but it feels sturdier and more premium than before, and looks better than the plastic screen protector I had previously. The touch is also a lot smoother than the plastic one, which was a bit rubbery. I installed mine on top of the ASF, both front and back, since I didn't want the "harrowing" experience of removing it. I feel like it's protected well enough to do without a case, though I may get a slim one to cover the edges of the phone as well. Highly recommended. :good:
GlassM is horrible??
Firstly look at these awful photos I've taken:
First go to Dropbox.com, following site:
https : // dl.dropboxusercontent . com
add the following lines for the photos right afterwards:
/u/45730680/GlassM Kratzer/GlassM_1.JPG
/u/45730680/GlassM Kratzer/GlassM_2.JPG
/u/45730680/GlassM Kratzer/GlassM_3.JPG
/u/45730680/GlassM Kratzer/GlassM_4.JPG
Can someone link these sites directly? Would be nice, thanks in advance. Email: [email protected]
I will send you the links to the images!!
Received my GlassM this week, applied it yesterday. For whatever the reason, there is now, after 12 hours of use, a 10cm large, deep scratch (no, it's not dust, polished few times). Over the first night, the screen got the crack though. This morning I've noticed the deep scratch.
Yesterday evening, just sliding over my wooden table, impressed of its smooth, I notived two smaller light scratches. I thought so, "ok thats not really your truth, GlassM", but now it's really enough.
GlassM's support does not reply to my support request unfortunately.
Can someone recommend other Glass-protectors for my beloved ZU?
Greetings,
slay

Love the feel of the note 3 but think I should protect it

Got my note 3 a few days ago and I'm loving it. I love the feel, the leather back, the slimness. It's great. But I feel I should be protecting it somehow.
I went for an official S View case but it turns out it's not official and i'm not sure I want to spend £50 on a case that doesn't offer full protection.
I've had a browse but can't seem to find one that would not effect the profile of the phone. Does anyone have any suggestions
Thanks.
Sent from my SM-N9005 using xda app-developers app
Dunno about slim cases (I have a UAG), but I'd definitely recommend a tempered glass screen protector. Especially if you were interested in getting the authentic S-view case.
I bought an $8 eBay protector recommended in the tempered glass screen protector thread and have been very happy with it. Cheap way to keep your screen scratch free.
The problem I've found with screen protectors is that I can't apply them for them life of me. They always bubble or get fluff stuck under them.
Sent from my SM-N9005 using xda app-developers app
cooljonL said:
The problem I've found with screen protectors is that I can't apply them for them life of me. They always bubble or get fluff stuck under them.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Try the tempered glass protectors. I used the MIME Ghost Glass for my S4 and i just got one for my Note 3. It just got here like 30 min ago. IF you get one, you don't have to worry about bubbles, they come out on their own in like an hour or 2. Just apply it in a bathroom after running the shower with hot water to get a touch (NOT a lot) of steam in the air. That pulls all the dust particles out of the air as you apply it.
As for the cases, I agree. I like the feel of the Note 3 naked. I also got a case that makes it actually feel more slippery. I love the case as i had the same for my S4 but it is more slippery. I picked up the Spigen Slim Armor case in the metal color.
I have a bumper case, just the frame around the phone. My phone already fell out from the pocket of my pants, when I was changing (frankly I thought I had the phone in my jacket, otherwise would be more careful) onto the wooden floor from about 4 feet and I think I would have already some type of damage, if it wasn't for the bumper case. I like my phone very much, therefore having it in pristine condition is more important than anything else.
Something like this:
http://www.amazon.com/Poetic-Borderline-Samsung-Manufacturer-Warranty/dp/B00FHG8ALS
Caseology, Spigen, and UAG are the only way to go for cases.
Sent from my SM-N900T using Tapatalk
I'm thinking of going for something like this (White View version):
http://www.amazon.co.uk/Spigen-Prot...9600&sr=8-15&keywords=Case+for+Samsung+Note+3
It's a little more than I want to spend on a case but it looks pretty good.
cooljonL said:
The problem I've found with screen protectors is that I can't apply them for them life of me. They always bubble or get fluff stuck under them.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
This is going to sound odd, but in order to get a flawless application of your screen protector . . . do it in the bathroom. I always run the shower as hot as it gets for a few minutes prior to trying to apply the screen protector to let the steam pull most of the dust particles out of the air. I also line up the screen protector prior to removing the backing and tape one side so that it functions like a hinge. This way once the backing is removed you do not have to worry about lining up the protector and it basically applies itself from the taped side.
---------- Post added at 03:36 PM ---------- Previous post was at 03:32 PM ----------
cooljonL said:
I'm thinking of going for something like this (White View version):
http://www.amazon.co.uk/Spigen-Prot...9600&sr=8-15&keywords=Case+for+Samsung+Note+3
It's a little more than I want to spend on a case but it looks pretty good.
Click to expand...
Click to collapse
Mine arrived yesterday and I love the quality. I have a tempered glass screen protector (iloome) on the way and I hope they fit and work well together.
Loving my uag
Sent from my SM-N900V using Tapatalk
Sardonik said:
Dunno about slim cases (I have a UAG), but I'd definitely recommend a tempered glass screen protector. Especially if you were interested in getting the authentic S-view case.
I bought an $8 eBay protector recommended in the tempered glass screen protector thread and have been very happy with it. Cheap way to keep your screen scratch free.
Click to expand...
Click to collapse
Question might be lame but just to make sure - Can tempered glass be removed if needed or once is applied/glued thats it ?
It will just lift up. No residue left really. Think of it as more sticky and does not bond like a glue. Until you crank one and have to remove it... It's kinda hard to describe. But it comes up as easy as it is to put down
Ordered it. Should be here soon. Do I still need a screen protector with it do you think?
Sent from my SM-N9005 using xda app-developers app
just want to ask something about tempered screen protector. i just bought the spigen glass tr screen protector and had applied it successfully on my note 3 just having one little lint underneath but i dont care too much about it as it cant be seen when the screen is on. but i want to ask is tempered glass has any side effect to my screen ? such as reduce the screen sensitivity as i heard from someone that using tempered glass has negative effect. is it true ?
I haven't noticed any sensitivity issues. To be fair, I put the protector on only a few days after I purchased the phone, but I honestly never noticed any ill effects after installation.
On my S4 or this phone I've never had sensitivity issue with either phone. The Spen works flawlessly with THE MIME Ghost Glass (is only 32mm thick as to Spigens tr glass which is .40mm thick)
Well my case turned up and I love it. Such a well made product.
It makes my phone look kind of Storm Trooper like. I wonder if I can get a vinyl for the front.
Sent from my SM-N9005 using xda app-developers app
The best case are always made by spG , they are always my first choice. great protection nearby beauty surely makes a great classic version of your phone ...
Sent from my SM-N900 using Tapatalk
Spigen does make a good case. Just wish they made all of them like they do for the iPhone 5.

Who needs a screen protector? Make stock glass oleophobic

I took off my stock screen protector a while ago and installed a tempered glass screen protector since the stock glass has no oleophobic coating and feels a little sticky. Well my screen protector chipped so I removed it and applied a coat of rain x. It feels great! Still slightly more sticky than gorilla glass but much better than the stock glass. I applied some to the back glass too just for protection under my case. The glass is more shiny and attracts fingerprints less. Any fingerprints are wiped off easier. I highly recommend using rain x instead of a screen protector after removing the stock layer. Now I'm pissed that I spent so much on those stupid screen protectors that are hard to apply perfectly and chip/crack after a few months.
..exactly what tempered screen protector did you buy? You have a link?
Great idea!!
Might use this on my new mobile phone, as I am looking to upgrade to this model.
Sent from my C2104 using XDA Free mobile app
SÜPERUSER said:
..exactly what tempered screen protector did you buy? You have a link?
Click to expand...
Click to collapse
I started with the one everyone on here recommends, m-glass. I got some crap under the front glass so I ordered the explosion proof front protector off amazon. The front protector chipped near the microphone after a few months and when I removed my case I noticed the m-glass back had cracked. The glass protectors feel nice but are too expensive and not durable imo.
bchaney16 said:
I started with the one everyone on here recommends, m-glass. I got some crap under the front glass so I ordered the explosion proof front protector off amazon. The front protector chipped near the microphone after a few months and when I removed my case I noticed the m-glass back had cracked. The glass protectors feel nice but are too expensive and not durable imo.
Click to expand...
Click to collapse
...okay..... there is not much details to judge if either you handled the product wrong or if its a design fault
Myself I have the mocolo instead http://glass4m.com/collections/sony/products/mocolo-for-sony-xperia
Before and still I have coated my glass with http://gtechniq.com/shop/3s-for-cars/kits/g1-g4-clearvision-screen-kit/
Think of getting illumishield screen protectors front and back ? to preserve mobile ? Phone .
Sent from my C6806 using XDA Free mobile app
I've had my mglass since I got the phone when I bought it back in Feb, zero issues, no scratches either
Sent from my Xperia Z Ultra using Tapatalk
Just put illumishield screen protectors front and back on my Z Ultra, looks good, except for detritus and bubbles underneath.
And I put them over the screen, without taking off the film.
Screen is very responsive, so impressed.
Sent from my C6806 using XDA Free mobile app
Not sure if you want to be in regular contact with those chemicals: http://goo.gl/yLmN1d
Known eye irritant.
May want to consider something less toxic like http://goo.gl/le5xtW if you want to go down this road.
So, I did this. Looks like a lot of forums have threads about Rain-X yielding positive results.
I also found this post and followed one of the comments.
Not sure if its available everywhere, but for glass coating I use Gtechniq G5. It lasts way longer than Rain X.
Applying is the same for both, tho.. The trick is to clean the screen as good as possible, and use something alcohol-based to make the surface free of residue from the cleaners. Put some G5/Rain X on a cotton patch and apply it in a THIN layer on the glass in "up and down" movements (not circular). Let it sit for a while (2-5min), then apply a new layer the same way on top of the previous layer and let that sit for a while again. Use a clean hot water-moist microfiber cloth to buff it off, and a dry one after.
Let the glass cure for a couple of hours (NO TOUCHING), and your good to go. The G5 coating should last for at least 6 month, and your glass screen should be resistant to dust and fluids. MUCH easier to clean too!
Click to expand...
Click to collapse
My phone feels a lot better now (ASF Removed) and it even seems to have reduced phantom touches.
ApertureAndroid said:
So, I did this. Looks like a lot of forums have threads about Rain-X yielding positive results.
I also found this post and followed one of the comments.
My phone feels a lot better now (ASF Removed) and it even seems to have reduced phantom touches.
Click to expand...
Click to collapse
Nice! I'm in need of another coat of Rain-X, it definitely wears off. Let us know if you try the G5.

What's a great, super slick plastic film screen protector

Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus one ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I couldn't find one like stock so I opted for a glass one mad by SuperShieldz.
I had used them before.
Works pretty well and I'd give it about a 4.5/5.
Frankenscript said:
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
Been using the one you posted for a month now and it's great. Perfect fit and even covers a lil bit of extra room at the bottom so if you're using nav gestures you won't be peeling at the bottom of it.
I used to use Armor Suit film protectors exclusively on all of my phones. May want to give them a look. I never had any issues with them at all.
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I'm using that one now. Closest to the stock one. Doesn't scratch easy at all. First try had 3 specks under by earpiece. 2nd attempt I have 1 speck in middle but it's liveable. I would definitely recommend it. The tgsp just blocks the edges. I didn't even have to retain fingerprints
Ok, I ordered it. Will install this weekend. Kinda scared to remove the factory one but it's already scratched after a month, and my phone lives in a case most of the time.
Will report back how it goes. Is it wet apply or dry?
Sent from my ONEPLUS A6013 using Tapatalk
Last night I removed the pre applied protector and put on the IQ shield one. It was an easy wet apply process. Got it on fine though maybe close to a mm too low; after it had mostly dried out by this morning I had a bit of an edge at the bottom where the screen curves. I burnished it down and hope it will stay. The protector is pretty full coverage, with a notch for the camera.
It was easy to work out the few bubbles while everything was wet, and I looked at the phone on edge using light reflections to see bumps to be squeegeed out. As expected there was some distortion while it was still wet, so I just set the phone aside until morning.
Fast forward 10 hours, and the distortion is gone. There is a definite orange peel "microbump" effect on the screen protector surface; hopefully that will diminish as it continues to dry out.
It's also not as slick as the original pre applied protector, at least not yet.
Let's see how it goes and will report back in a few days.
Sent from my ONEPLUS A6013 using Tapatalk
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Frankenscript said:
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Click to expand...
Click to collapse
Thanks for your review/input. I was torn between this or the Skinomi one. I had a TGSP before from Omotion with the oem case and it landed face first and cracked the digitizer because it sat flush with the lip of the case. It was my kinda my fault though because I knew this and was waiting on my Rhinoshield bumper and couldn't wait to slap on my TGSP. Anyways got it fixed and always kinda wanted the orangy look because I never could afford Zaggs years ago [emoji38]
Sent from my ONEPLUS A6013 using Tapatalk
I remember the Zagg protectors! Had one on my DroidX in ~2010. Good product but it absorbed dye from my holster case and got gradually darker in regions of it where it had most contact with the inside of the holster. I sent it back eventually and got a free replacement; good warranty. I hope this IQShield one won't darken...
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
vegetaleb said:
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
Click to expand...
Click to collapse
Where did you read that?
hRAQyfb1oz said:
Where did you read that?
Click to expand...
Click to collapse
3 years experience
Couple weeks in now. Really liking the self healing protector. Sure it has a bit of orange peel effect but that doesn't impact use. It has held up well so far.
Sent from my ONEPLUS A6013 using Tapatalk
I will have the wet imak film protection any time now, though I wonder if I apply it or keep the stock one.
For people who applied third party film protection do you recommend it or no difference with stock?
IQshield is self healing and soft squishy not flat like the stock one. I like it after some use.
Sent from my ONEPLUS A6013 using Tapatalk
Prism from dbrand
MrPhilo said:
Prism from dbrand
Click to expand...
Click to collapse
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Im in the same boat as OP.
Really liked the pre-applied screen protector the 6T came with (does Oneplus not sell that one?)
Lasted about 2 months, but I really liked how clear it was.
I ordered the IQ Shield one, and while good, it has the orange skin effect going on that the included didnt have. Any recommended options for clear flim protectors for the 6T?
formicae said:
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Click to expand...
Click to collapse
Yep, put mine on today, it sucks. Doesn't cover the whole screen, makes it look a little grainy, just a crappy product. Yeah maybe it's super strong but what's the point of it makes using the device a poor experience?

Categories

Resources