Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus one ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I couldn't find one like stock so I opted for a glass one mad by SuperShieldz.
I had used them before.
Works pretty well and I'd give it about a 4.5/5.
Frankenscript said:
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
Been using the one you posted for a month now and it's great. Perfect fit and even covers a lil bit of extra room at the bottom so if you're using nav gestures you won't be peeling at the bottom of it.
I used to use Armor Suit film protectors exclusively on all of my phones. May want to give them a look. I never had any issues with them at all.
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I'm using that one now. Closest to the stock one. Doesn't scratch easy at all. First try had 3 specks under by earpiece. 2nd attempt I have 1 speck in middle but it's liveable. I would definitely recommend it. The tgsp just blocks the edges. I didn't even have to retain fingerprints
Ok, I ordered it. Will install this weekend. Kinda scared to remove the factory one but it's already scratched after a month, and my phone lives in a case most of the time.
Will report back how it goes. Is it wet apply or dry?
Sent from my ONEPLUS A6013 using Tapatalk
Last night I removed the pre applied protector and put on the IQ shield one. It was an easy wet apply process. Got it on fine though maybe close to a mm too low; after it had mostly dried out by this morning I had a bit of an edge at the bottom where the screen curves. I burnished it down and hope it will stay. The protector is pretty full coverage, with a notch for the camera.
It was easy to work out the few bubbles while everything was wet, and I looked at the phone on edge using light reflections to see bumps to be squeegeed out. As expected there was some distortion while it was still wet, so I just set the phone aside until morning.
Fast forward 10 hours, and the distortion is gone. There is a definite orange peel "microbump" effect on the screen protector surface; hopefully that will diminish as it continues to dry out.
It's also not as slick as the original pre applied protector, at least not yet.
Let's see how it goes and will report back in a few days.
Sent from my ONEPLUS A6013 using Tapatalk
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Frankenscript said:
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Click to expand...
Click to collapse
Thanks for your review/input. I was torn between this or the Skinomi one. I had a TGSP before from Omotion with the oem case and it landed face first and cracked the digitizer because it sat flush with the lip of the case. It was my kinda my fault though because I knew this and was waiting on my Rhinoshield bumper and couldn't wait to slap on my TGSP. Anyways got it fixed and always kinda wanted the orangy look because I never could afford Zaggs years ago [emoji38]
Sent from my ONEPLUS A6013 using Tapatalk
I remember the Zagg protectors! Had one on my DroidX in ~2010. Good product but it absorbed dye from my holster case and got gradually darker in regions of it where it had most contact with the inside of the holster. I sent it back eventually and got a free replacement; good warranty. I hope this IQShield one won't darken...
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
vegetaleb said:
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
Click to expand...
Click to collapse
Where did you read that?
hRAQyfb1oz said:
Where did you read that?
Click to expand...
Click to collapse
3 years experience
Couple weeks in now. Really liking the self healing protector. Sure it has a bit of orange peel effect but that doesn't impact use. It has held up well so far.
Sent from my ONEPLUS A6013 using Tapatalk
I will have the wet imak film protection any time now, though I wonder if I apply it or keep the stock one.
For people who applied third party film protection do you recommend it or no difference with stock?
IQshield is self healing and soft squishy not flat like the stock one. I like it after some use.
Sent from my ONEPLUS A6013 using Tapatalk
Prism from dbrand
MrPhilo said:
Prism from dbrand
Click to expand...
Click to collapse
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Im in the same boat as OP.
Really liked the pre-applied screen protector the 6T came with (does Oneplus not sell that one?)
Lasted about 2 months, but I really liked how clear it was.
I ordered the IQ Shield one, and while good, it has the orange skin effect going on that the included didnt have. Any recommended options for clear flim protectors for the 6T?
formicae said:
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Click to expand...
Click to collapse
Yep, put mine on today, it sucks. Doesn't cover the whole screen, makes it look a little grainy, just a crappy product. Yeah maybe it's super strong but what's the point of it makes using the device a poor experience?
Related
Just got my first screen scratch on my new Rezound yesterday and have been kicking myself ever since. I've used screen protectors in the past on my tablets, but I personally didn't like the way they felt. They felt plasticky and cheap, whereas the glass screens were so smooth and premium-feeling.
My question to you, the Internet, is about screen protectors. Which one do you like most? Which one feels most like glass/is least noticeable/etc.?
(I searched, but most of the recommended ones in other threads are not produced for the Rezound yet.)
I havent found any legit ones on ebay yet. I like the rubbery film protectors not the hard plastic ones. My favorite for the Inc1 and 2 was the NakedShield. Those were awesome. Couldnt even tell there was anything on it.
I bought one from ebay by "xtreme guard" and it was awful. Pretty good materials but terrible shipping. I got several replacements from him because he ships them alone in an envelope and they come stuck to the side and rip when taken out. I told him several times and attempted to send him pictures of me opening the envelope and seeing the destroyed product but he didnt care
I have one from verizon that I got when I purchased the phone and it's ok, but I have used the seidio ultimate screen guard on every phone I've had since the Evo 4g on Sprint and I really like the feel of them. It's really clear, goes on easy and doesn't feel sticky. I would recommend them.
http://www.seidioonline.com/htc-rezound-screen-guard-protector-p/spm1htrzd.htm
I like the rubbery kind cause they don't scratch or mar.
I use the Ghost Armor brand.
It's crystal clear.
Smooth but not plastic feel.
Some people talk about orange peel effect, for me I only see it if I hold the phone at extreme angle. I never see it or feel it in actual use.
The Ghost Armor seems to be more finger oil resistant than nakedd or the plastic static screen protectors.
And with Ghost's you get life time replacements for your device.
They also have kiosk in malls, where they do installs and replacements.
Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.
anybody find one that covers the whole screen including the camer, LED and light sensor?
I've been using (and loving) Skinomi. Yeah, with that name it sounds like it should be sold in a sex shop, but it's a fantastic screen protector. It feels like the bare glass, is crystal clear, and can be put on easily.
You know, now that I think about it, maybe it SHOULD be sold in a sex shop...
06stang said:
Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.
Click to expand...
Click to collapse
Well that's one way to look at it. My previous phone I put the full body Ghost armor on myself, went like 9 months, no case, then it started to peel around the edges got it re-skinned for 5 and it lasted another 18 months until I got this phone.
I tried those static protectors and I just don't like the feel, and they get smudges galore.
E-bay may have something just as good or better but I don't know what it is, and don't have the time to waste buying from a bunch of different places. There's probably a thousand choices on eBay, but I have no clue which is good or if they are even consistent with what they sell. They may be getting screen protectors from several manufacturers.
I'm not certain, but I thought the 5 buck replacement is only if you have it re-installed at a kiosk?
I picked up the clear Halo ones off of Amazon, and am really happy. Don't like the rubbery Zagg ones, and don't like the anti-glare ones as they seem to mess with the clearness of the screen.
I bought the clear Verizon ones when I picked up the phone, and while they are clear, they scratch very easily.
I've had the Halo ones for about a week. They are just as clear, and haven't scratched yet. They fit better than the Verizon, a bit wider so they cover edge to edge, but not quite tall enough. (When you install them, start at the top)
http://www.amazon.com/Halo-Screen-P...ZBEI/ref=sr_1_1?ie=UTF8&qid=1327964467&sr=8-1
so far the Seido ultimate screen guards have satisfied me, as clear as the glass, no distortions at any angle... I do recommend!
Just got a second one from "Clear Freak" on ebay. He sent me one for the wrong phone. So I'm having no luck with eBay protectors. I trimmed it to fit but wouldnt advise it. I do tint all day so it came pretty easy to me
Pretty happy with the one that came with my otterbox. tried the Zagg but didnt get along with that one.
I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top
Not a good idea. Had several people call in with water damage on their phones and I had to tell em tough luck. Doesn't matter if it actually has water damage just if the external or internal sticker turns pink
Boxwave
racinwarrior said:
anybody find one that covers the whole screen including the camer, LED and light sensor?
Click to expand...
Click to collapse
I just got in my Boxwave Crystal Clear today and it fits over the entire glass top to bottom with a cutout for the front facing camera. I had one on my Dinc for 2 years and it was great--got very view scratches--and I like the feel on the screen. They are expensive but can be removed, cleaned, and replaced.
mintcookies said:
I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top
Click to expand...
Click to collapse
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium
I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.
GordoGuapo said:
I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.
Click to expand...
Click to collapse
Press your fingernail into the black area above or below the screen. You will see it is not hard like the bare glass. That small bit of give is what is being described. The static screen protectors don't have that.
username235 said:
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I agree, REALOOK Screen Protectors are good quality. It covers the entire face, with anti-glare and anti-fingerprint qualities...
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here https://youtu.be/5Oqm9CMETvw
Hmm interesting concept, might have to try this out eventually. I have a feeling thought that once you put a case on those bubbles on the edges might come back as seen in that video.
The corners, of course, don't wrap around, and therefore are susceptible to lifting.
Can confirm it's been a few hours. No bubbles. If you swap cases frequently it might be an issue. Essentially the edges are tucked in the back of the phone and then held in place by the case sides and back.
Not anti-shock protector after all :/
Have this being delivered today from Amazon. Looks promising
seoulbrova said:
Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here
Click to expand...
Click to collapse
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
I just installed this on my s8+. Best screen protector I have used on the phone so far. The wrap around not only keeps it from coming up on the edges, but also helps to apply by acting like handles. It sits shy of the corners to lessen the chance of the corners being lifted by a case. The feel is smooth, but it does have a slight orange peel finish. Went on perfectly and seems to hold very well. Does show fingerprints much more than a naked screen.
Looks promising, I just grabbed one from Amazon. Thanks for sharing.
acheney1990 said:
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
Click to expand...
Click to collapse
Wings just go very slight. If you have a skin on the back I would tuck the wings under the skin. It might even help hold things in place even better. Screen is super smooth.
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Kambuja said:
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Click to expand...
Click to collapse
That's interesting. I've used matte protectors and don't think those one is matte. It isn't clear as glass but I think it has pretty good clarity.
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
PieceofSlice said:
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
Click to expand...
Click to collapse
Are you sure you are using these screen protectors? Mine is shy of reaching the corners, and I actually have the supcase and it is fine. I have had no issues with lifting at all. The screen protector does not reach the corners so it never interferes with the case i use. Perhaps you installed it a bit too high or low on the screen.
---------- Post added at 08:23 AM ---------- Previous post was at 08:21 AM ----------
marvi0 said:
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
Click to expand...
Click to collapse
That is the one I have, but from the US amazon store. They are new so I am guessing that is why there is only one review. The US store has more reviews.
Just ordered off Ringke's official eBay store. Won't be here until next week but I'll update with how it turns out. Thanks
I know one user has said they dont like the screen protector due to clarity lacking.
However can anyone else comment on the clarity of this screen protector?
I want to purchase this but dont want any degradation of image quality from my screen.
Any input is appreciated, thank you.
Just received and applied mine.
I prefer glass, always have. I've read review after review of the current generation of glass and haven't felt like any would please me. I'm a bit picky, so much so I often order more than 1 of any protector in case I miss a speck of dust or something goes wrong.
This wrap around one is actually pretty nice. Installation is pretty much all about alignment and cleanliness. I guess I've installed enough that I got both the first attempt. It went on easy enough, plenty of bubbles that I was able to work out easily enough. Wrapping the edges went smoothly and the finished result is fairly impressive.
The feel is glass like. It's not glass but it's not rubbery nor is there any apparent orange peel effect. It's smooth and responsive and I don't notice any issues with clarity. Honestly looking at the device I can't tell there's a protector on it until I look at the edges. The edges (top and bottom) are there, but you have to look for them. Time will tell if they collect dust or peel, however they stick well and the whole thing is thin enough you barely feel where protector ends.
I have the official thin case, it went on without issue. The wrap around is nice in there is no difference between no protect tion and this protector. Together I feel the device is protected from scratches, but not drops. The S8+ (and it's little brother) are notoriously prone to breaking if you believe drop tests, so I really didn't expect this setup to be all protecting.
As for the back where it wraps around, well it's pretty much as I described the top. You'll feel where the edge is but it would only be distracted ting to the most anal retentive types.
Overall​ I would give it a try. 2 for $11 isn't asking that much.
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Kenneth000 said:
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Click to expand...
Click to collapse
9+H harder than sapphire.... lol ok there.
I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising
Hey guys,
Thought I'd share my experience with this screen protector.
I've tried damn near all available on the market (tempered glass specifically) except the official OnePlus tempered glass. None were up to par. They all only have adhesive along the edges only which imo is a poor desicion. I see no plus to this.
The ones i tried all got dust under in a matter of days, and some even fell off completely after small drop tests.
Although this spigen is not a tgsp, it's is worth every penny. Application was easy, the wet application makes it to where alignment is 99 percent perfect. It covers at least all of the lighted display, of course it doesnt follow the 2.5d curve.
After application it took a couple hours to clear up any haziness that remained after squeegee/drying process. Don't apply too much pressure as I seem to have wrinkled a corner.
All in all, very satisfied with the product and will continue to buy after they get ugly...unless they make a perfect tgsp im the future.
Link: https://www.amazon.com/gp/aw/d/B074...+5+neoflex&dpPl=1&dpID=516YABFlNoL&ref=plSrch
MrWilsonxD said:
Click to expand...
Click to collapse
Edited. My bad.
cesar.mk4 said:
Edited. My bad.
Click to expand...
Click to collapse
. all good! Going to try one of these when I get paid!
MrWilsonxD said:
. all good! Going to try one of these when I get paid!
Click to expand...
Click to collapse
It's pretty much the same as the one comes pre-installed on the device.
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Caspertje19 said:
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Click to expand...
Click to collapse
Its far less of a dust/lint magnet. Id say 80 percent less attraction.
I just bought this protector as well, and installed it today.
It is exactly the same size as the pre-installed protector, which personally I like. That avoids issues with the curved screen, but is still large enough to protect the screen adequately when using a case. Of course the second benefit is that this is a case friendly screen protector. I have a cheap black TPU case similar to the spigen rugged armor, and they fit together without issue.
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield. I have used these on older devices, although I upgraded to TGSP on my last phone. I would have bought a TGSP for this phone, but apparently, the manufacturers have no clue what they're doing. I do like this type of protector. It is a wet application. This protector makes the screen appear slightly textured when viewed from extreme angles, but not much viewed straight on. I need to give it a full day to dry before I get too critical of it. The package came with two, and I'm likely to use these until a decent TGSP rolls around.
jjesusfreak01 said:
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield.
Click to expand...
Click to collapse
Yup, forgot to mention that. Still don't have any cosmetic problems with the film. Even the wrinkle I mentioned in the first post has corrected. I can actually see the film "heal" when I scratch it with my nail intentionally.
1 day followup: All the bubbles have disappeared. There is still very mild visible distortion that is present with every protector of this type. It doesn't bother me, but screen clarity perfectionists will probably complain. Again, its not a TGSP, but its great for what it is. No other issues.
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Akubus said:
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Click to expand...
Click to collapse
You could go for the ultimate shield, which is basically the same type of screen protector.
Unlike the spigen it covers the whole front, I mean the area below the fingerprint scanner especially.
I don't know if there is any difference in thickness or coating.
The ultimate shield also has the same "orange skin effect" that was mentioned earlier in this thread, but u will barely see it when using your phone.
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Gaurav.Stallion said:
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Click to expand...
Click to collapse
After a quick clean an inspection i noticed one single micro scratch. This is since day before original post.
Just installed this today. Haze from the liquid went away within hours and so far so good!
There is an "orange peel effect" and it doesn't feel like glass but those are a given, and expected, so no points off for these two things.
It's much better than any tgsp that I've tried, simply due to the fact that it's edge to edge. I couldn't stand
1. The lack of adhesive on the sides
2. The sides being significantly cut off
The "wet install" allows for you to have a perfect install as well, as you can slide it around and adjust it perfectly, before finally setting it in place.
I'll see how it holds up over time and will update this post if anything unusual happens with it!
I will also try and get some pics soon (if I remember lol)
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
bobbyricha said:
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
Click to expand...
Click to collapse
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
CephiroX said:
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
Click to expand...
Click to collapse
I removed the case and wiped it down with the cloth. I left it out of the case to dry / cure.
CephiroX said:
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
Click to expand...
Click to collapse
On the Spigen install video at install.spiegen.com for the case friendly S8, they show putting it on with the case on. That's what I did. Spigen calls it full coverage but compatible with Spigen case.
After installing it then removing the case for drying and curing, the bubbles disappeared after about 18 hours, but I have one piece of trash trapped. After putting the case back on, it seems compatible but the film goes out to the border of the Spigen case without touching it, except it barely touches on the bottom. It is a very close fit, I believe putting it on without the case would cause problems with alignment.
Overall not bad, it is easier to align the film with the case on. The touch feel is OK for me.