[Q] Favorite Screen Protector? - HTC Rezound

Just got my first screen scratch on my new Rezound yesterday and have been kicking myself ever since. I've used screen protectors in the past on my tablets, but I personally didn't like the way they felt. They felt plasticky and cheap, whereas the glass screens were so smooth and premium-feeling.
My question to you, the Internet, is about screen protectors. Which one do you like most? Which one feels most like glass/is least noticeable/etc.?
(I searched, but most of the recommended ones in other threads are not produced for the Rezound yet.)

I havent found any legit ones on ebay yet. I like the rubbery film protectors not the hard plastic ones. My favorite for the Inc1 and 2 was the NakedShield. Those were awesome. Couldnt even tell there was anything on it.
I bought one from ebay by "xtreme guard" and it was awful. Pretty good materials but terrible shipping. I got several replacements from him because he ships them alone in an envelope and they come stuck to the side and rip when taken out. I told him several times and attempted to send him pictures of me opening the envelope and seeing the destroyed product but he didnt care

I have one from verizon that I got when I purchased the phone and it's ok, but I have used the seidio ultimate screen guard on every phone I've had since the Evo 4g on Sprint and I really like the feel of them. It's really clear, goes on easy and doesn't feel sticky. I would recommend them.
http://www.seidioonline.com/htc-rezound-screen-guard-protector-p/spm1htrzd.htm

I like the rubbery kind cause they don't scratch or mar.
I use the Ghost Armor brand.
It's crystal clear.
Smooth but not plastic feel.
Some people talk about orange peel effect, for me I only see it if I hold the phone at extreme angle. I never see it or feel it in actual use.
The Ghost Armor seems to be more finger oil resistant than nakedd or the plastic static screen protectors.
And with Ghost's you get life time replacements for your device.
They also have kiosk in malls, where they do installs and replacements.

Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.

anybody find one that covers the whole screen including the camer, LED and light sensor?

I've been using (and loving) Skinomi. Yeah, with that name it sounds like it should be sold in a sex shop, but it's a fantastic screen protector. It feels like the bare glass, is crystal clear, and can be put on easily.
You know, now that I think about it, maybe it SHOULD be sold in a sex shop...

06stang said:
Yeah $5 replacements and $20 for initial product and install. Ebay protector costs $2 and does the same thing plus I don't have to stick it in an oven or coat it in water.
Click to expand...
Click to collapse
Well that's one way to look at it. My previous phone I put the full body Ghost armor on myself, went like 9 months, no case, then it started to peel around the edges got it re-skinned for 5 and it lasted another 18 months until I got this phone.
I tried those static protectors and I just don't like the feel, and they get smudges galore.
E-bay may have something just as good or better but I don't know what it is, and don't have the time to waste buying from a bunch of different places. There's probably a thousand choices on eBay, but I have no clue which is good or if they are even consistent with what they sell. They may be getting screen protectors from several manufacturers.
I'm not certain, but I thought the 5 buck replacement is only if you have it re-installed at a kiosk?

I picked up the clear Halo ones off of Amazon, and am really happy. Don't like the rubbery Zagg ones, and don't like the anti-glare ones as they seem to mess with the clearness of the screen.
I bought the clear Verizon ones when I picked up the phone, and while they are clear, they scratch very easily.
I've had the Halo ones for about a week. They are just as clear, and haven't scratched yet. They fit better than the Verizon, a bit wider so they cover edge to edge, but not quite tall enough. (When you install them, start at the top)
http://www.amazon.com/Halo-Screen-P...ZBEI/ref=sr_1_1?ie=UTF8&qid=1327964467&sr=8-1

so far the Seido ultimate screen guards have satisfied me, as clear as the glass, no distortions at any angle... I do recommend!

Just got a second one from "Clear Freak" on ebay. He sent me one for the wrong phone. So I'm having no luck with eBay protectors. I trimmed it to fit but wouldnt advise it. I do tint all day so it came pretty easy to me

Pretty happy with the one that came with my otterbox. tried the Zagg but didnt get along with that one.

I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top

Not a good idea. Had several people call in with water damage on their phones and I had to tell em tough luck. Doesn't matter if it actually has water damage just if the external or internal sticker turns pink

Boxwave
racinwarrior said:
anybody find one that covers the whole screen including the camer, LED and light sensor?
Click to expand...
Click to collapse
I just got in my Boxwave Crystal Clear today and it fits over the entire glass top to bottom with a cutout for the front facing camera. I had one on my Dinc for 2 years and it was great--got very view scratches--and I like the feel on the screen. They are expensive but can be removed, cleaned, and replaced.

mintcookies said:
I have the REALOOK Crystal Clear one. works very well and no distortions. fits the front plate perfectly from edge to edge. It covers the capacitive buttons, camera hole, and proximity sensor.
Applied in a steamed bathroom and result had no air bubbles.
http://www.amazon.com/REALOOK-Veriz...rystal/dp/B006PBROPC/ref=cm_cr_pr_product_top
Click to expand...
Click to collapse
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium

I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.

GordoGuapo said:
I love my ZAGG protector. They're difficult to put on, but it's worth it. Had one for the DInc and it lasted the entire two years until my upgrade, and is still currently on there! I don't get the rubbery feel that others mentioned, mine is smooth as a baby's bottom.
Click to expand...
Click to collapse
Press your fingernail into the black area above or below the screen. You will see it is not hard like the bare glass. That small bit of give is what is being described. The static screen protectors don't have that.

username235 said:
I've had these for about a month, and they're the best. It still feels like you just have the glass on it still, and it really does cover every part of the glass area. You honestly forget there's anything on it.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I agree, REALOOK Screen Protectors are good quality. It covers the entire face, with anti-glare and anti-fingerprint qualities...

Related

Anyone used Invisible Shield Before?

I'm looking at screen protectors right now. I decided to get the Otter Commuter case. Reviews say the included screen protector is terrible. So I'm getting a second one. I've look at a few. Moshin, Skinomi and invisibleSHIELD so far. I'm only getting a screen protector, not a whole-body cover.
I've heard some good reviews about invisibleSHIELD, but many say it gets dirty fairly quick. (Around the edges). Anyone have any first-hand experience? Any other recommendations?
Yes, I used it, and I hate it. With InvisibleShield, the screen doesn't feel as smooth as other screen protectors that I've used (PowerSupport USA, Belkin, Griffin, etc.) It seems to have a sticky feel to it when you're using the screen with IS.
I got a moshin for free from the atnt rep. Prob the easiest and cleanest protector I ever put on. It's antiglare, but has a nice finish.
Ill order two. I'll need to replace one eventually. Thanks.
Sent from my Galaxy S2 i777 CM7 Nightlys
the Moshi, at least the one I got at ATT, says you can peel it off, wash it and then reattach it to the phone. It even recommends cleaning it by taking it off the phone. I can't wait to see how that really goes...
Between my wife and myself, we've had InvisibleShields on iPhone, Cappy and HTC Aria. Both of us are happy with them. I will agree with a previous poster that they can get a slightly "sticky" feel to them, but I find they are much better, in terms of long term wear and consistency, than either the static or dry adhesive types. They clean up very nicely with LCD screen cleaner and a lint-free cloth.
As of early last week, Zagg didn't have IS available specifically for the ATT version of the SGS2, so I took the advice of a poster on another thread and bought a pair of Int'l SGS2 protectors from ArmorSuit for about 10% the price of the Zagg product (the paraphrased advice was "for wet-applied screen protectors, they are all the same, buy the cheapest one"). To this point they appear extremely similar to the IS, so I may stick with them.
Hope that helps...
I used invisible shield and body gaurdz, out of those 2 I like the body gaurdz the most.
Sent from my SAMSUNG-SGH-I777 using xda premium
All those "military grade" screen protector feels the same... lol
I've used it on my old iPhones. They are pretty useless, you lose the screen quality and the touch and feel of it.
They don't protect the screen at all, their warranties only cover the plastic not the screen so it's pointless. Only use for the covers is on the back of a phone since they get a lot of surface damage.
I would just get any type of cover and not waste 20+ on name brand military grade protectors.
i used a few different ones on the captivate. but i loved the Invishield one the most. i liked the more rubber texture and it is insanely tough. The same one has been on the phone for 2 years so far and it still looks great.
I hate them. They are crappy and they seem to lower the quality of the image of the screen. I can't stand the feel of them. The best one I've used so far were Realooks. I used that on my Captivate and my wifes HTC. After putting it on, the image quality stays the same and it doesn't look or feel like there is a protector on there. I don't plan on using one for this phone.
Just to add a little bit - no matter what you put over your screen, you are going to impact your image quality some - whether or not it is noticeable to you is a matter of several factors:
a) quality of the screen protector
b) how well it was installed
c) how much damage/scratching/smudging is on the protector
d) how attuned the user is to image quality
Personally, I find wet mount protectors much easier to install in a high quality manner and get less bubbles/loss of clarity compared to dry mount protectors.
This military shield thing I got cheap installed very nicely, and after a day of it being on and the microbubbles working out, I personally notice minimal impact on image quality.
I work at asphalt plants (a very dusty and dirty environment with numerous hazards to phones) so I am uncomfortable with not protecting my screens. I would rather have something damage a $20 (or $2 in my current case) plastic screen protector that is easily replaceable than damage the glass of my $550 device. In fact, I once had the Aria in my pocket when an asphalt sample container I was carrying broke open, spilling 330 degree hot mix asphalt all over my side and into the pocket with the phone. After digging the asphalt out of my pocket along with the phone (yeah, it was toasty and I was in a hurry ) I picked all the rocks and sand off the phone (which was also in a silicone sleeve type case) and cleaned it up with a little of the solvent we use. No permanent damage. I'll stick to screen protectors....
I decided to order the skinomi protectors. I'll see how they are. It is a wet application, so I hope everything goes well.
runtohell121 said:
All those "military grade" screen protector feels the same... lol
Click to expand...
Click to collapse
That is incorrect. Go get a zagg invisibleshield, and then put it on. they go on easy, and in return they degrade easier.
If you live near a mall with a Ghost Armor installation location, GO THERE. Their(as well as zaggs) prices are are steeper than your average 3pack for $12, but they install it for you.
I used invisibleshield/body guardz for 2 years before these guys put them out of business in my local mall. Their material is the same, EXCEPT it is thinner and MUCH MUCH MUCH more natural feeling. It does not feel grippy, and it is still extremely protective. The only thing is that your screen will look like crap for about a day. after that day, it should clear up and you'll hardly even notice the orange peel effect that zagg's have so much of.
I will recommend these guys for my screen protection any day.
I just ordered an invisible shield for my gs2. Should be arriving with my case mate pop case....everyone has their own opinions but I've always been happy with zagg products
Sent from my SAMSUNG-SGH-I777 using XDA App
ive used ishield before on my nokia. it did have that rubbery feel or sort ! thought it was easy to install. on the other hand ive tried skinomi? same wet application but it feels smoother. i currently use it on my touchpad
In my experience very overpriced, and it gives the orange peel effect.
I guess they do actually work if you dont mind compromising screen clarity/image quality.
Sirgatory said:
That is incorrect. Go get a zagg invisibleshield, and then put it on. they go on easy, and in return they degrade easier.
If you live near a mall with a Ghost Armor installation location, GO THERE. Their(as well as zaggs) prices are are steeper than your average 3pack for $12, but they install it for you.
I used invisibleshield/body guardz for 2 years before these guys put them out of business in my local mall. Their material is the same, EXCEPT it is thinner and MUCH MUCH MUCH more natural feeling. It does not feel grippy, and it is still extremely protective. The only thing is that your screen will look like crap for about a day. after that day, it should clear up and you'll hardly even notice the orange peel effect that zagg's have so much of.
I will recommend these guys for my screen protection any day.
Click to expand...
Click to collapse
You are talking about Ghost armor right?
Sent from my SGH-I777 using Tapatalk
I picked up a cheap anti glare protector from ebay 4 for $4 lol quality is great. Easy to install. I just dont see why spend so much $$ when ther are cheaper options x)
Sent from my SAMSUNG-SGH-I777 using XDA App
I have used iShield before on my iPhone; but prefer the hard screen shields as they are less "sticky" for swiping with the fingers like the one that came with the TPU case for my SGS2. I find that the soft ones with the solution spray is more sticky for some reason maybe for grip as some do wrap the whole phone with iShield.

Galaxy Player 5.0 Screen Protector

I am wondering which ones you guys bought for your players (Obviously those screens are too nice to be scratched ). I got the Zagg Invisibleshield on their cyber Monday sale for $8
Same thing for me, same promotion. Now, I hate those Zagg guys.
But the important thing I guess is that the screen protector works well.
I bought a cheap ebay set, used for 2-3 weeks, removed. They scratched too easily. I like it bare! Have nice leather case, hopefully I won't scratch it... or good ones will become available.
tcat007 said:
I bought a cheap ebay set, used for 2-3 weeks, removed. They scratched too easily. I like it bare! Have nice leather case, hopefully I won't scratch it... or good ones will become available.
Click to expand...
Click to collapse
After trying different types of screen protectors for my phone and tablet, I found that it is best to bare it. Screens produced these days are very tough actually, I don't have any scratches on any devices so far.
These days I only get screen protectors to deal with fingerprints... The Moshi screen protectors AT&T carries are great for this. Problem is that since the SGP5 isn't an AT&T phone, I don't get the usual 50% discount on accessories I get.
I had a ZAGG InvisibleShield on my Huawei S7, which was decent, and reminds me I need to eBay that piece of **** tablet. (Whatever you all do - don't buy Huawei products. They've improved build quality a lot, but customer support for their devices SUCKS.)
The SGP5 is a fingerprint/fingersmudge magnet.
I find there are fewer fingerprints bare than with a protector (at least the cheap ones). A bare screen also cleans much easier. I may try one of those matte anti-fingerprint ones. Bare is so smooth and responsive!
tcat007 said:
I find there are fewer fingerprints bare than with a protector (at least the cheap ones). A bare screen also cleans much easier. I may try one of those matte anti-fingerprint ones. Bare is so smooth and responsive!
Click to expand...
Click to collapse
Yeah, the Moshis I had on my Infuse and have on my GSII are matte anti-fingerprint - love em'!
I got on my 2 Galaxy tabs Ghost Armor but on my 2 SGS II i got the Zagg but I will take it off and go with the Ghost Armor, I like it better!!
i got a skinomi screen protector and carbon fiber skin protector. the screen protector works pretty well, the skin is really just for a little more grip.
i had some issues with shipping, but, long story short, they had some great customer service, and they ended up shipping me two.
I have seen a lot of comments about Zagg that the screen protector feels rubbery or sticky to the touch. Is that correct? How about the ghost armor.
At this point, I have not put anything on. I like the look and touch of the screen, and I the only pocket that I would put my SGP 5 in is my shirt pocket. It has a folio case for traveling.
I would like to keep the screen protected, but just don't know what to use that I have not read bad comments about.
I have zagg on 2 of my devices and they were both a little sticky feeling for the first week or so, but as you use it, it irons out to a perfect smooth. I love Zagg and I'll get one for every device I own!
Sent from my YP-G70 using Tapatalk
jhndflpp said:
i got a skinomi screen protector and carbon fiber skin protector. the screen protector works pretty well, the skin is really just for a little more grip.
i had some issues with shipping, but, long story short, they had some great customer service, and they ended up shipping me two.
Click to expand...
Click to collapse
I got a Skinomi screen protector and wood skin for my Archos 70. The skin gave it better grip but after 6 months, the skins small pieces kept falling off. The screen protector though is great. Never coming loose. I had a couple scratches show up on it but after a few minutes they disappeared. Also the bare screen was a finger print magnet but once I go this screen protector on it was much better. Loved Skinomi screen protector so much I ordered one the for my Samsung 5 minutes after I ordered the device itself. Screen protector came before the device so I was able to put it on right away. Looks great, finger prints barely show up, never need to clean off the screen, never got any scratches showing up.
1776 said:
I have seen a lot of comments about Zagg that the screen protector feels rubbery or sticky to the touch. Is that correct?
Click to expand...
Click to collapse
Supposedly the Zagg are made of the same material as the Skinomi. I noticed that it does have a little bit of a rubbery feel which doesn't bother me. It also did have a bit of a sticky feel, but that went away after a while. I thought maybe I got used to the sticky feel but I had one of these on my Archos tablet and the sticky feel went away, then when I got my Samsung and put a skinomi on that I felt the sticky again so it was not that I got use to the sticky feeling, it actually went away (The sticky feeling on my Samsung is now gone). I don't think I'll ever get another mobile device without getting a Skinomi screen (or ZAGG if they happen to be cheaper).
How is the quality, I want a protector for my SGP, too
I had a cheap Ebay one on it, but took it off because it got greasy way too fast. I like it bare, I'm not too worried about scratches. I tried scratching it with an exacto knife and it didn't scratch. I carry it around in this case which protects it very well: http://www.amazon.com/AmazonBasics-...GEOQ/ref=sr_1_1?ie=UTF8&qid=1327694289&sr=8-1
I also have this case on the device, that gives it a good grip and additional protection.
I use an xtreemegaurd. I like it a lot! Easy to install, and I only have like one or two air bubbles, (not on the screen)
I bought a basic TPU
I bought 2 but I lost one, always good to have the film on it
any tips on how to remove bubbles on screen protectors? they're annoying
Remove protector is easiest way. I've been running bare for a month, no scratches yet! Otherwise if you are careful you should be able to get no bubbles. They are usually caused by lint or dust specks. You can try pealing back and using tape to remove the dust, then roll it back down. I have yet to find a protector that feels as good as the raw screen (which seems very durable)
kesongpinoy said:
any tips on how to remove bubbles on screen protectors? they're annoying
Click to expand...
Click to collapse
I am using Stealth Shieldz. They are just like Zagg, but a lot cheaper and come with two. They are like 3 dollars on amazon. Absolutely no air bubbles. It is also a tad bit thinner than zagg I believe. It is a great screen protector. Lifetime warranty. So far so good.
Sent from my YP-G70 using XDA App

Screen Protectors

i know i am in the minority being a fan of zagg, but it looks like they are gonna be making a screen protector
http://www.zagg.com/invisibleshield/htc-droid-dna-cases-screen-protectors-covers-skins-shields.php
Cheap screen Protector in ebay
To day I found 5x screen protector in ebay just under 10 bucks.
I think it will be good and it is anti glare as well.
I want tempered glass
Sent from my Galaxy Nexus using Tapatalk 2
I let the Verizon salesman get me to buy their overpriced protectors (3 for $15...) I really don't like it. It's as wide as the screen, but long enough to cover the Verizon logo on top, and the softkeys on the bottom. It has cut outs for the camera and the light sensor.
What I don't like, is that despite the best efforts of the Verizon salesman (and he did try his hardest, there isn't a spec of dust under the cover) the edges don't stick. This is because the phone's glass curves to the edge. This leaves a tiny bit of the protector that isn't stuck down. Not only does this look bad, but it's also going to attract dust and pocket lint to get in there.
Furthermore, the screen protector also detracts from the aesthetics of the phone, it shows finger prints much more than the gorilla glass 2 does, and it adds a very slight color tint.
I think I'm going to remove it and just go without.
If you like Zagg then xtremeguard already has the DNA protectors available. Current sale means they are only 5 bucks a pop. I have used them before and was very pleased.
That is strange I got the Verizon screen protectors and don't have the issue ..however mine isn't edge to edge .. did he give you some type of aftermarket or does it have the droid stamp on it ..?
Sent from my HTC6435LVW using Tapatalk 2
The Verizon protectors not covering the entire screen (not edge to edge, only the part that's illuminated) is a deal breaker for me. I'll just keep shopping around.
Also, I have nothing against Zagg. I've used Zagg on two devices and they held up great without any of the (noticeable) orange-peeling effect I've read about. My only big complaint with them is the outrageous price.
Sent from my HTC6435LVW
I am patiently waiting for sgp steinheil, and a decent sleeve.
screen protector
The ArmorSuit MilitaryShield Screen Protector is the best!
Are screen protectors even necessary? I owned my DROID X for 2 yrs without a screen protector and it looked as good as the day I bought it. That only had Gorilla Glass 1, it looks like Gorilla Glass 2 is supposed to be thinner is all, and I assume the same strength.
I am not for one going to put one on. Besides I love how silky smooth the screen is, and despise others with their sticky rough screen protectors.
Sent from my HTC6435LVW using Tapatalk 2
Because of the curved edges the display has, I doubt there will be ones that will cover the whole thing, unless they come curved... I don't use screen protectors, but for those that do, that's most likely all you will get.
The more I use the phone, the more I'm thinking about just skipping the screen protector this time around. It seems pretty substantial on its own and the great, smooth feel is something I wouldn't want to lose (along with the clarity of the awesome screen, too).
Sent from my HTC6435LVW
Do any of you guys that don't have screen protectors on have any scratches yet? I know it is not supposed to scratch but that's not always the case. I currently have the Verizon one on mine.
volfan22 said:
Do any of you guys that don't have screen protectors on have any scratches yet? I know it is not supposed to scratch but that's not always the case. I currently have the Verizon one on mine.
Click to expand...
Click to collapse
Like I said above, I'm currently not using a protector and I have been shoving it in/pulling it out of my pockets and even dropped it on a wood floor (screen down) and no nicks or scratches...so far.
Sent from my HTC6435LVW
I just can't use screen protectors no matter what. Some of them have a haze foggy look to them, others feel a tad sticky, and sometimes I'll have the tiniest dust particle under the glass or just a small bubble around one of the edges. <<<---- Each, and everyone of these drive me nuts! Also the touch never feels the same, or as smooth. I don't know about most of you, but I'm very anal about my phones, and never had any glass damage, or scratches for that matter.
My final word.... GO NAKED!!!!!!
volfan22 said:
Do any of you guys that don't have screen protectors on have any scratches yet? I know it is not supposed to scratch but that's not always the case. I currently have the Verizon one on mine.
Click to expand...
Click to collapse
I work in construction sites a lot. And I use my flash light app a lot. I will sometimes lay my phone screen down above the ceiling. There is always metal shavings and chunks of cement up there and I do not have the smallest hint of a scratch on my screen. I have also dropped it on concrete and asphalt, still nothing.
I honestly think it is a sales gimmick.
Sent from my HTC6435LVW using Tapatalk 2
I have a Gnex right now... went naked with that and it was a mistake. I have 2 or 3 small hairline scratches and I take pretty decent care of my phone. I dislike screen protectors but I dislike scratches even more.
i've had an old LG Xenon (text phone) i had a cheap case on it which i ended up destroying after repeated drops on concrete, I've even cracked the screen a little on the side with the case and screen protector on, but after all of that i went naked anticipating an upgrade, but i've dropped it off a 2nd story porch straight down onto concrete with screen face down and not even a scratch. I think that the screen itself will survive alot of impacts, it's the rest of the body (as well as the corner of the screen) that can't take the damage.
I'm going no screen protector, but will put a case on it once the one i want comes out. I dont believe it makes enough of a difference to counter the cons of it.
Hey people, just wanted to do my part and contribute.
Xtremeguards https://www.xtremeguard.com/SearchResults.asp?Search=droid+dna has the Droid DNA wet apply screen protector on sale for $1.50 (originally $15) with free shipping. Just enter in code "70OFF1" at checkout. I bought 3 of them. Hope this helps someone. I haven't personally had experience with xtremeguards but I've used xoskins, another wet apply option and it worked pretty well.
azndan2 said:
Hey people, just wanted to do my part and contribute.
Xtremeguards https://www.xtremeguard.com/SearchResults.asp?Search=droid+dna has the Droid DNA wet apply screen protector on sale for $1.50 (originally $15) with free shipping. Just enter in code "70OFF1" at checkout. I bought 3 of them. Hope this helps someone. I haven't personally had experience with xtremeguards but I've used xoskins, another wet apply option and it worked pretty well.
Click to expand...
Click to collapse
you the MAN!! hell ya thanks alot doesn't get any better than that. i looked up some review and they say it has less orange peal than the invisibleSHIELD. sounds like xoskins claims so i hope its just as good

Cheap slim glass screen protector

Hey guys,
I'm looking for a screen protector that is relatively cheap, ($10 each at most, frequently recommended ones like Spigen are over 30 bucks!), made of glass and slim.
No need for it to be bulletproof or anything, I'm careful with my phones and I just want it to not scratch with regular usage, not be a fingerprint magnet and not interfere with touch or s-pen sensitivity.
Anything you guys have personally used (preferably for some time already) and can recommend?
Heres the one Im using, its from AmzDeal been using about a week dropped my phone several times over the weekend out hiking and not a scratch on it its tough ill give it that. Its 10 bucks shipped with amazon prime and i got it in 2 days. Its a knock off but been very good. When I got it it came in the AmzDeal box and packaging, but when I went to apply the protector it said Incipio which doesnt even make one like that for the N3 LoL. So its cheap, a knock off but feels great, stylus glides across it and as I said after numerous drops is showing to be very strong. It also is a full cover around the phone except around the top speaker, and prox sensor area but goes around the entire screen and comes with a home button cover to help make it stick up more. I took out my original screen protector on my ZeroLemon case and this fits great inside. Hope this helps link is below:
AmzDeal Screen Protector
Hey i really like zagg shields get one for bout 15 bucks
dp_alvarez said:
Hey guys,
I'm looking for a screen protector that is relatively cheap, ($10 each at most, frequently recommended ones like Spigen are over 30 bucks!), made of glass and slim.
No need for it to be bulletproof or anything, I'm careful with my phones and I just want it to not scratch with regular usage, not be a fingerprint magnet and not interfere with touch or s-pen sensitivity.
Anything you guys have personally used (preferably for some time already) and can recommend?
Click to expand...
Click to collapse
I haven't put a screen protector on my last couple phones because I felt like they attracted grime/oil/fingerprints too much - what's the point of keeping your screen in pristine unblemished condition if you can't see it clearly because the cover is covered in fingerprints! The glass is so tough now that they really aren't necessary unless you tend to be a little abusive to your phones.
That said, I recently put on a couple different TechArmor protectors and the matte finish one is great. It is the "anti-glare / anti-fingerprint" version. I also tried the "ultra clear" version and that one is horrible! You touch it once and suddenly it looks like that beautiful sharp screen is covered in vaseline or something. Absolute fingerprint magnet, I couldn't stand it for 5 minutes. The AG/AF one is fantastic though. I really like the matte finish and how it sort of subdues the brightness of the screen without losing crispness or clarity. And you will never see a fingerprint again. I also LOVE how the stylus feels on it. It always felt a little awkward to write with on the bare screen, but on the matte protector it really feels like using a high quality ball point pen on paper. I'm sure the matte finish will be an instant turn off for some people, but I really like it and it's functional too. The "anti-glare" properties are marginal at best, but the anti-fingerprint properties are excellent. $7 for a three pack on Amazon and a little kit for applying it cleanly with no dust specks. Be careful to choose the AG/AF option and NOT the clear option (it's kind of a hidden as a "color option" so make sure you pick the one you want before you add to cart)
Nillkin glass protector - slim, smooth and has curved sides
No need to deal with inferior PET protectors
amebiasis said:
Heres the one Im using, its from AmzDeal been using about a week dropped my phone several times over the weekend out hiking and not a scratch on it its tough ill give it that. Its 10 bucks shipped with amazon prime and i got it in 2 days. Its a knock off but been very good. When I got it it came in the AmzDeal box and packaging, but when I went to apply the protector it said Incipio which doesnt even make one like that for the N3 LoL. So its cheap, a knock off but feels great, stylus glides across it and as I said after numerous drops is showing to be very strong. It also is a full cover around the phone except around the top speaker, and prox sensor area but goes around the entire screen and comes with a home button cover to help make it stick up more. I took out my original screen protector on my ZeroLemon case and this fits great inside. Hope this helps link is below:
AmzDeal Screen Protector
Click to expand...
Click to collapse
You said it was only cut out around the speaker and proximity sensor, but the photo of the ptoduct you linked to has the wide cut out, exposing the camera as well. Is the picture accurate or is your description?
I hate the extra wide cut out, I think that contributed to cracking my original screen protector.
Sent from my SM-N900T using XDA Free mobile app
gnik luap said:
You said it was only cut out around the speaker and proximity sensor, but the photo of the ptoduct you linked to has the wide cut out, exposing the camera as well. Is the picture accurate or is your description?
I hate the extra wide cut out, I think that contributed to cracking my original screen protector.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Ya sorry about that I've got it in a case and didn't realize it went over that far, the picture is correct it goes from your LED to your camera. I will say though I spoke with the seller and he apologized said the distributor put the wrong incipio sticker on the device packaging and is sending me a new protector just because. So I will say the seller was really good to work with.

What's a great, super slick plastic film screen protector

Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus one ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I couldn't find one like stock so I opted for a glass one mad by SuperShieldz.
I had used them before.
Works pretty well and I'd give it about a 4.5/5.
Frankenscript said:
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
Been using the one you posted for a month now and it's great. Perfect fit and even covers a lil bit of extra room at the bottom so if you're using nav gestures you won't be peeling at the bottom of it.
I used to use Armor Suit film protectors exclusively on all of my phones. May want to give them a look. I never had any issues with them at all.
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I'm using that one now. Closest to the stock one. Doesn't scratch easy at all. First try had 3 specks under by earpiece. 2nd attempt I have 1 speck in middle but it's liveable. I would definitely recommend it. The tgsp just blocks the edges. I didn't even have to retain fingerprints
Ok, I ordered it. Will install this weekend. Kinda scared to remove the factory one but it's already scratched after a month, and my phone lives in a case most of the time.
Will report back how it goes. Is it wet apply or dry?
Sent from my ONEPLUS A6013 using Tapatalk
Last night I removed the pre applied protector and put on the IQ shield one. It was an easy wet apply process. Got it on fine though maybe close to a mm too low; after it had mostly dried out by this morning I had a bit of an edge at the bottom where the screen curves. I burnished it down and hope it will stay. The protector is pretty full coverage, with a notch for the camera.
It was easy to work out the few bubbles while everything was wet, and I looked at the phone on edge using light reflections to see bumps to be squeegeed out. As expected there was some distortion while it was still wet, so I just set the phone aside until morning.
Fast forward 10 hours, and the distortion is gone. There is a definite orange peel "microbump" effect on the screen protector surface; hopefully that will diminish as it continues to dry out.
It's also not as slick as the original pre applied protector, at least not yet.
Let's see how it goes and will report back in a few days.
Sent from my ONEPLUS A6013 using Tapatalk
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Frankenscript said:
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Click to expand...
Click to collapse
Thanks for your review/input. I was torn between this or the Skinomi one. I had a TGSP before from Omotion with the oem case and it landed face first and cracked the digitizer because it sat flush with the lip of the case. It was my kinda my fault though because I knew this and was waiting on my Rhinoshield bumper and couldn't wait to slap on my TGSP. Anyways got it fixed and always kinda wanted the orangy look because I never could afford Zaggs years ago [emoji38]
Sent from my ONEPLUS A6013 using Tapatalk
I remember the Zagg protectors! Had one on my DroidX in ~2010. Good product but it absorbed dye from my holster case and got gradually darker in regions of it where it had most contact with the inside of the holster. I sent it back eventually and got a free replacement; good warranty. I hope this IQShield one won't darken...
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
vegetaleb said:
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
Click to expand...
Click to collapse
Where did you read that?
hRAQyfb1oz said:
Where did you read that?
Click to expand...
Click to collapse
3 years experience
Couple weeks in now. Really liking the self healing protector. Sure it has a bit of orange peel effect but that doesn't impact use. It has held up well so far.
Sent from my ONEPLUS A6013 using Tapatalk
I will have the wet imak film protection any time now, though I wonder if I apply it or keep the stock one.
For people who applied third party film protection do you recommend it or no difference with stock?
IQshield is self healing and soft squishy not flat like the stock one. I like it after some use.
Sent from my ONEPLUS A6013 using Tapatalk
Prism from dbrand
MrPhilo said:
Prism from dbrand
Click to expand...
Click to collapse
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Im in the same boat as OP.
Really liked the pre-applied screen protector the 6T came with (does Oneplus not sell that one?)
Lasted about 2 months, but I really liked how clear it was.
I ordered the IQ Shield one, and while good, it has the orange skin effect going on that the included didnt have. Any recommended options for clear flim protectors for the 6T?
formicae said:
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Click to expand...
Click to collapse
Yep, put mine on today, it sucks. Doesn't cover the whole screen, makes it look a little grainy, just a crappy product. Yeah maybe it's super strong but what's the point of it makes using the device a poor experience?

Categories

Resources