Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here https://youtu.be/5Oqm9CMETvw
Hmm interesting concept, might have to try this out eventually. I have a feeling thought that once you put a case on those bubbles on the edges might come back as seen in that video.
The corners, of course, don't wrap around, and therefore are susceptible to lifting.
Can confirm it's been a few hours. No bubbles. If you swap cases frequently it might be an issue. Essentially the edges are tucked in the back of the phone and then held in place by the case sides and back.
Not anti-shock protector after all :/
Have this being delivered today from Amazon. Looks promising
seoulbrova said:
Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here
Click to expand...
Click to collapse
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
I just installed this on my s8+. Best screen protector I have used on the phone so far. The wrap around not only keeps it from coming up on the edges, but also helps to apply by acting like handles. It sits shy of the corners to lessen the chance of the corners being lifted by a case. The feel is smooth, but it does have a slight orange peel finish. Went on perfectly and seems to hold very well. Does show fingerprints much more than a naked screen.
Looks promising, I just grabbed one from Amazon. Thanks for sharing.
acheney1990 said:
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
Click to expand...
Click to collapse
Wings just go very slight. If you have a skin on the back I would tuck the wings under the skin. It might even help hold things in place even better. Screen is super smooth.
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Kambuja said:
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Click to expand...
Click to collapse
That's interesting. I've used matte protectors and don't think those one is matte. It isn't clear as glass but I think it has pretty good clarity.
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
PieceofSlice said:
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
Click to expand...
Click to collapse
Are you sure you are using these screen protectors? Mine is shy of reaching the corners, and I actually have the supcase and it is fine. I have had no issues with lifting at all. The screen protector does not reach the corners so it never interferes with the case i use. Perhaps you installed it a bit too high or low on the screen.
---------- Post added at 08:23 AM ---------- Previous post was at 08:21 AM ----------
marvi0 said:
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
Click to expand...
Click to collapse
That is the one I have, but from the US amazon store. They are new so I am guessing that is why there is only one review. The US store has more reviews.
Just ordered off Ringke's official eBay store. Won't be here until next week but I'll update with how it turns out. Thanks
I know one user has said they dont like the screen protector due to clarity lacking.
However can anyone else comment on the clarity of this screen protector?
I want to purchase this but dont want any degradation of image quality from my screen.
Any input is appreciated, thank you.
Just received and applied mine.
I prefer glass, always have. I've read review after review of the current generation of glass and haven't felt like any would please me. I'm a bit picky, so much so I often order more than 1 of any protector in case I miss a speck of dust or something goes wrong.
This wrap around one is actually pretty nice. Installation is pretty much all about alignment and cleanliness. I guess I've installed enough that I got both the first attempt. It went on easy enough, plenty of bubbles that I was able to work out easily enough. Wrapping the edges went smoothly and the finished result is fairly impressive.
The feel is glass like. It's not glass but it's not rubbery nor is there any apparent orange peel effect. It's smooth and responsive and I don't notice any issues with clarity. Honestly looking at the device I can't tell there's a protector on it until I look at the edges. The edges (top and bottom) are there, but you have to look for them. Time will tell if they collect dust or peel, however they stick well and the whole thing is thin enough you barely feel where protector ends.
I have the official thin case, it went on without issue. The wrap around is nice in there is no difference between no protect tion and this protector. Together I feel the device is protected from scratches, but not drops. The S8+ (and it's little brother) are notoriously prone to breaking if you believe drop tests, so I really didn't expect this setup to be all protecting.
As for the back where it wraps around, well it's pretty much as I described the top. You'll feel where the edge is but it would only be distracted ting to the most anal retentive types.
Overall​ I would give it a try. 2 for $11 isn't asking that much.
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Kenneth000 said:
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Click to expand...
Click to collapse
9+H harder than sapphire.... lol ok there.
Related
I'm trying to decide which will be a better fit for a screen protector. Right now, there really seems to be only two contenders. The Zagg and the Skinomi, links provided. I know there are generic protectors but I'm looking for the "best of class" for this beast. Anyone have any suggestions before I scratch this baby?
Zagg
http://www.zagg.com/invisibleshield/htc-titan-cases-screen-protectors-covers-skins-shields.php
Skinomi
http://www.amazon.com/Skinomi-TechSkin-Screen-Protector-Shield/dp/B005OZHG7Q/ref=sr_1_1?ie=UTF8&qid=1323207100&sr=8-1
-Cyber
I personally hate the wet type of protectors for the screen. It messes up the smoothness of the touchscreen & your fingers don't glide over it easily (especially the tacky feeling Zaggs. Those are the worst).
Go with the dry ones (the kind that use static cling to stick). I ordered the REALOOK protector from Amazon that gets good reviews on their other devices. Should be here in a day or two. They feel as smooth as glass.
I guess it's a matter of preference. I had a Zagg on my Focus for a year now, and it works great for me. It does give the screen a more "grippy" feel though, but I actually like that. If you want it to feel slick, I probably wouldn't go with the wet style. Another plus for the wet though is that it's pretty much invisible when applied. You won't get any peeling or bubbling like a dry protector. A lot of screen protectors are quite noticeable when they're put on a phone.
Reading the Realook reviews on Amazon shows they get mostly great reviews. I might have to give them a try one day. For now, I'll stick with Zagg though. It just arrived yesterday, and my phone should be in by Thursday, so it'll be the first thing I install.
AT&T
I got the one from AT&T from there website and LOVE LOVE the feel it gives.
Just enough Drag to feel comfortable.
wrapsol makes some good ones as well. haven't decided what to get yet...
Got from tmart (can't post a link yet)
search ror item BD005788
Not bad at all
Brando Ultra Clear is the best.
got the htc one from clove technology.excellent fit
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Tempest790 said:
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Click to expand...
Click to collapse
Yep, got mine in too. And I agree. Its almost TOO perfect, meaning they cut this thing so there's hardly ZERO room for error when applying. I actually ended up scrapping the first one I applied (it comes w two) because I wasn't satisfied with the slight bubble in the corner.
But I FINALLY managed to install the second one perfectly. Now its amazing & 100% perfect. Thank God, cause it freakin took forever. You really have to have patience when applying these. Be sure to stick a small piece of scotch tape on the bottom side so you can peel it up easily, because you're going to be doing that a lot to get it to seat just right.
I installed the maximum body Zagg and the screen protector turned out perfect. I've installed zaggs on LG Quantum, and Samsung Focus so I had some practice. For some reason the Titan zagg seems better quality than the ones installed on the other phones. I'm really not seeing any orange peel. I also put on the case mate tough case and doesn't mess up the zagg protection at all. For the Titan I love the Zagg
Sent from my HTC Titan using Board Express
I never liked the grabbiness of the Zagg protectors. I ordered the ATT offered two-pack not knowing they were the full on glare reducing version. At first, it was a little too much, but the glare reduction seems to settle in a bit with use. OR my eyes are used to it now, but I quite like it after using it for a while. I matches the matte finish of the phone.
That said, I do want a screen protector that doesn't have anti-glare made by the same people as the ATT Samsung Focus version. Super slick, was pretty tough. Anyone know the vendor that made it for ATT?
"Orange peel" - that's a good description of my Focus Zagg screen protector. It didn't bother me though. I still have my Zagg in my drawer if the Realook craps out, but I don't think so.
I just bought the Skinomi Carbon Fiber full body kit that comes with a screen protector and really like it.
One BIG problem though: The Carbon Fiber back skin seems to have killed my signal strength. I now get no service instead of 3 bars? It covers the whole back of the phone. Even the plastic antennae area.
I'm surprised that it would kill your signal strength. I would check the metal contacts on the back case and the phone to make sure everything is touching and seated properly. Someone else in the forum tried that, and it fixed their problem.
I'm using atFolix anti-glare screen protector, it's brilliant get improved contrast and it's finger print resistant!
Got it from here: http://www.amazon.co.uk/atFoliX-FX-...m=A3P5ROKL5A1OLE&pf_rd_r=05DX3CNJ9KFAVHD8RYFC
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
xtrememanix said:
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
Click to expand...
Click to collapse
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
i'm not sure what you mean by the frost effect . to me its really clear !
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
Ok I'll answer my own question! Curiosity got better of me so decided to get Rock Naked Screen Protector AF & AG, and sure enough it's clearer then atFolix anti-glare screen no frost effect!
So if anyone's interested here are the Pros and Cons between the two screen protectors:
atFolix anti-glare got it from here http://www.amazon.co.uk/atFoliX-FX-...0VSQ/ref=sr_1_1?ie=UTF8&qid=1330083294&sr=8-1 :
Pros:
- Easy to fit
- Perfectly fits the screen of the Titan no gaps!
- Excellent anti-glare and anti-fingerprint
Cons:
- You lose sharpness of the display and get frosted glass effect on close inspection!
- Easily scratches!
Rock Naked Screen Protector AF & AG got it from here http://www.obostore.com/rock-anti-f...ed-screen-protector-for-htc-titan-p-3597.html :
Pros:
- Good anti-glare and anti-fingerprint
- You don't lose sharpness of display i.e. no frosted glass effect
Cons:
- Fiddly to put on!
- Not a perfect fit for Titan about 1mm gap around screen!
- Easily Scratches
For me between the two I prefer the Rock Naked Screen Protector over atFolix losing screen sharpness/frosted glass effect was too much of a compromise!
Hey guys,
I've tried two different glass protectors and theyve both been too narrow for the screen leaving like 1mm of unprotected screen on both sides of the phone.
Just came across this youtube video showing the Spigen Curved Crystal. I cant post links yet so just YouTube search "Spigen Galaxy S7 Crystal Curve Screen Protector Review"
The Amazon listing has alot of positive reviews but theyre mostly biased according to FakeSpot. The weird part is that the youtube review itself shows a pretty good looking screen protector that fills both sides.
Another weird thing is that on Spigen's site it costs 25$ and on Amazon its only 9$ even though its the official Spigen Amazon page.
Anyone tried it or has any info?
I desperately need screen protection thats not completely horrible.
Edit: Sorry, wrong thread.
Screen protectors are collected here: http://forum.xda-developers.com/gal...arching-screen-coverage-glass-screen-t3328181
That thread's for people who reviewed previous glasses, and since it hasnt been reported on yet, I dont think the post belongs there.
This screen protector is awesome, but not glass
Sent from my iPhone using Tapatalk
I just installed mine on Monday after I was dissatisfied with the Zagg HD Dry.
The Zagg had a rubbery feel and showed little gouges/divots that supposedly would self-heal but I just didn't like it. My case is a Spigen Neo Hybrid and I was getting some bubbling near the edges.
So far, I'm liking the Curved Crystal. No issues at all with lift near the case and a nice smooth feel.
There's a very slight green tint that I notice at certain angles. My phone is black which makes it stand out more. I also installed it on my coworkers silver S7 Edge and the green tint isn't as noticeable.
It was a bit tricky to install compared to other protectors I've used since it doesn't go all the way to the top and bottom edge and has the curve on the sides. They recommend using their stickers to hold it in place on the home button while installing. If I would do it again, I'd use two stickers on either side of the home button instead.
Also, they give you two in a package which is nice.
I bought mine through Amazon.
+1 for Spigen curved crystal from Amazon.
Was totally dissatisfied with all the 2.5d glass screen protectors I tried.
While this isn't 100% coverage it offers protection from the scratches that were starting to develop from being in my back pocket (never carried with anything else. Lint/pocket debris will scratch an unprotected s7 screen).
Spigen Curved Crystal HD is the best so far. It is a film and not glass. But it covers the full screen area just not the full front of the phone. The corners, above the top sensors, and below the home button are uncovered. It does adhere to the curved edge nicely and works with my Tech 21 case fine. Glad you get two, as I did get a few fine scratches on it when putting it on (my stupidity).
i have try some ,but they are either creat narrow , or just narrower size
I also ha e installed a spigen curved crystal HD. Nice to the touch but not as nice as glass. I wasn't a fan of the top and bottom cutouts so I cut the protector so it just covers the screen portion of the phone, looks really good besides the one piece of dust and a piece of hair that got trapped under while installing. I used the wet install method, seems to be alot easier than dry install. Other than that I'm liking it so far.
Sent from my SM-G935F using XDA-Developers mobile app
Here's pics of the cut crystal HD I modified to cover just the screen portion of the phone. If I would have made the cuts a little smother it would look even better.
Sent from my SM-G935F using XDA-Developers mobile app
This is about the best screen protector you can buy for the s7. Not easy to apply but no halo effect
Sent from my SM-G930T using XDA-Developers mobile app
just got this, and it's a really nice protector. i'm just dumb and suck at putting them on lately, so of course i got some dust under it, and after like my 5th time of peeling up a corner to remove dust, one portion towards the middle of the phone won't stick to the phone anymore, so i must have slightly bent the protector or something, bc it's a small line that just looks like a bubble, as it won't go flat. but other than that, this protector is great. fits the curved edges, no bubbling around the edges like every other one, and it seems really thin. works with my tscase leather case, but i wanna try it with my spigen neo hybrid to make sure it doesn't lift up the edges. if it does with their own brand case, then thats BS lol
jayochs said:
just got this, and it's a really nice protector. i'm just dumb and suck at putting them on lately, so of course i got some dust under it, and after like my 5th time of peeling up a corner to remove dust, one portion towards the middle of the phone won't stick to the phone anymore, so i must have slightly bent the protector or something, bc it's a small line that just looks like a bubble, as it won't go flat. but other than that, this protector is great. fits the curved edges, no bubbling around the edges like every other one, and it seems really thin. works with my tscase leather case, but i wanna try it with my spigen neo hybrid to make sure it doesn't lift up the edges. if it does with their own brand case, then thats BS lol
Click to expand...
Click to collapse
Works perfect with the Neo Hybrid. No lifting or creasing. Just be careful if you gear vr if you put it into fast it can push the protector. I use that and the spigen plastic case case.
Sent from my SM-G930T using XDA-Developers mobile app
I haven't tried vr yet but I tried it in the hybrid.. it works but if you like slightly squeeze the side of the case, you can see some bubbling occur, so even their own cases will slightly lift it.
Sent from my Samsung Galaxy S7 using Tapatalk
jayochs said:
I haven't tried vr yet but I tried it in the hybrid.. it works but if you like slightly squeeze the side of the case, you can see some bubbling occur, so even their own cases will slightly lift it.
Sent from my Samsung Galaxy S7 using Tapatalk
Click to expand...
Click to collapse
Could be placement of the protector (not completely centered). I am not getting any lift on mine. I will try and post some pictures later.
could be. it's a pain to get perfect.
Sent from my Samsung Galaxy S7 using Tapatalk
Anyone got any images if this fitted?
I've currently got the atfolix installed which covers the entire screen, just a fan of SPIGEN products.
this screenprotector is so easy to have cratches on my screen is full of scrathes after 2 weeks., other user have this experience to?
Sent from my SM-G935F using XDA-Developers mobile app
superleeds27 said:
Anyone got any images if this fitted?
I've currently got the atfolix installed which covers the entire screen, just a fan of SPIGEN products.
Click to expand...
Click to collapse
Here are some pictures of the Spigen Curved Crystal on the regular S7 in the Otterbox Symmetry case.
felloffthetruck said:
Here are some pictures of the Spigen Curved Crystal on the regular S7 in the Otterbox Symmetry case.
Click to expand...
Click to collapse
Cheers for these how you finding it?
Nowhere in the UK currently has this in stock! I'll have to keep my eyes open for stock, tempted to make the switch
OnePlus 5 Screen Protector,BIUZKO Full Coverage Anti-Scratch, Anti-Fingerprint, Bubble Free 3D Curved Protection Tempered Glass Screen Protector (Black) https://www.amazon.com/dp/B0744NWJRF/ref=cm_sw_r_cp_apa_zupJzbSMMQ6JQ
Has anyone bought this yet that is on XDA? I just purchased it and should get it Monday. The reviews look like it's pretty awesome, especially the customer images of it.
I'll definitely report back with pictures and case compatibility. I have the Orzly Fusion and Sandstone from OnePlus.
Pictures are down in the post.
ab7casper said:
I received the TGSP early. Soo...here up. The pictures. It is pretty awesome, not gonna lie.
At first I heard the popping noise, and was like oh no... But then I used a hairdryer and pressed down a little bit and it's no longer popping. The protector fit perfectly, each cutout was in perfect alignment, and the cutouts are smaller than the Orzly which makes it look a lot better without having huge areas for error. The glass itself feels great, not quite as good as the actual screen but close.
I definitely recommend it after these first couple of hours.
The second picture (taken outside) with the Orzly Fusion case, the first (inside) is with the One Plus Sandstone case. When I switched cases, the popping came back, so that just means the Fusion case was holding down the sides enough to keep it all stuck down, which works for me as I rarely have my case off.
I can update again later on if anything happens. I've already broken 3 TGSP already.... Haha
Click to expand...
Click to collapse
Thank you, I am curious how it would come out. The pictures don't show the halo or oil effects because the screen is off and to the side in the reviews!
I wouldn't just look at the best reviews to be honest, you're always best to get a feel for all the reviews, especially this one:
I was looking for something with full coverage and the 3d edges, which this has, but after 1 day there is dust under the screen protector and it makes a clicking noise when pressed in a majority of the bottom 1/4 of it. I'm using the oneplus silicon case so its not an issue with the case pressing against it and lifting it up either, and it's lined up very well, as this isn't my first screen protector installation.
Click to expand...
Click to collapse
That makes it sound like it's similar to the Orsly protector as in it looks great at first but then the sides will let in dust. Also, some of the names in those top reviews look dodgy and are probably fake accounts, they're all one single name like "Sally", Amazon doesn't follow those naming conventions, it's usually "Sally.B".
I'm guessing it'll be great at the start but you'll have problems with it adhering to the edges and you might hear clicky noises and have lack of responsiveness according to the less than 5 star ratings, let us know though?
djsubterrain said:
I wouldn't just look at the best reviews to be honest, you're always best to get a feel for all the reviews, especially this one:
That makes it sound like it's similar to the Orsly protector as in it looks great at first but then the sides will let in dust. Also, some of the names in those top reviews look dodgy and are probably fake accounts, they're all one single name like "Sally", Amazon doesn't follow those naming conventions, it's usually "Sally.B".
I'm guessing it'll be great at the start but you'll have problems with it adhering to the edges and you might hear clicky noises and have lack of responsiveness according to the less than 5 star ratings, let us know though?
Click to expand...
Click to collapse
Definitely. I'm still using my cracked Orzly right now. I'm scared to take it off cause it's my 3rd TGSP I've had (2x from Orzly and 1x OP TGSP [lasted 2days]). With that track record, my screen is bound to get shattered.
ab7casper said:
Definitely. I'm still using my cracked Orzly right now. I'm scared to take it off cause it's my 3rd TGSP I've had (2x from Orzly and 1x OP TGSP [lasted 2days]). With that track record, my screen is bound to get shattered.
Click to expand...
Click to collapse
I've got an Orzly on mine just now with dust under the edges and an official TGSP from OnePlus still in the box cos I want to wait for the Spigen Neo Hybrid to be released and don't really want to use it until that's bought and on the phone.
It seems to be an issue with all of these protectors with the black surround, they only have adhesive on the edges so don't always keep it attached to the screen and dust ends up getting under the protector because it's flexed when you hold the case. Really think OnePlus needs to have a look at their screen design with the next phone and try to work better with these manufacturers' protectors.
djsubterrain said:
I've got an Orzly on mine just now with dust under the edges and an official TGSP from OnePlus still in the box cos I want to wait for the Spigen Neo Hybrid to be released and don't really want to use it until that's bought and on the phone.
It seems to be an issue with all of these protectors with the black surround, they only have adhesive on the edges so don't always keep it attached to the screen and dust ends up getting under the protector because it's flexed when you hold the case. Really think OnePlus needs to have a look at their screen design with the next phone and try to work better with these manufacturers' protectors.
Click to expand...
Click to collapse
I whole heartedly agree. Looking at how mine is cracked, it's almost aligned with the volume up/down button (two cracks btw), and the crack that is all the way through the protector aligns almost in the center of my volume down button... Which we have to hold down to boot into recovery manually... Which I do a lot. I have the fusion case from Orzly, which fits perfectly with the screen protector. I'm starting to think it fit too perfectly, and the pressure from holding volume down and power button at the same time caused the cracks.
djsubterrain said:
I've got an Orzly on mine just now with dust under the edges and an official TGSP from OnePlus still in the box cos I want to wait for the Spigen Neo Hybrid to be released and don't really want to use it until that's bought and on the phone.
It seems to be an issue with all of these protectors with the black surround, they only have adhesive on the edges so don't always keep it attached to the screen and dust ends up getting under the protector because it's flexed when you hold the case. Really think OnePlus needs to have a look at their screen design with the next phone and try to work better with these manufacturers' protectors.
Click to expand...
Click to collapse
It's not at all about working with these TGSP manufacturer's. It's the stle of glass they are putting on the phones (2.5d glass). ALL phone OEMs need to stay FAR away from 2.5d glass. There is no reason EVER to use 2.5d glass. This is why the TGSP don't work with the phones. This all started with the Note 4. You'd think these companies would learn not to use these type of glass on the phones.
I received the TGSP early. Soo...here up. The pictures. It is pretty awesome, not gonna lie.
At first I heard the popping noise, and was like oh no... But then I used a hairdryer and pressed down a little bit and it's no longer popping. The protector fit perfectly, each cutout was in perfect alignment, and the cutouts are smaller than the Orzly which makes it look a lot better without having huge areas for error. The glass itself feels great, not quite as good as the actual screen but close.
I definitely recommend it after these first couple of hours.
The second picture (taken outside) with the Orzly Fusion case, the first (inside) is with the One Plus Sandstone case. When I switched cases, the popping came back, so that just means the Fusion case was holding down the sides enough to keep it all stuck down, which works for me as I rarely have my case off.
I can update again later on if anything happens. I've already broken 3 TGSP already.... Haha
ab7casper said:
I received the TGSP early. Soo...here up. The pictures. It is pretty awesome, not gonna lie.
At first I heard the popping noise, and was like oh no... But then I used a hairdryer and pressed down a little bit and it's no longer popping. The protector fit perfectly, each cutout was in perfect alignment, and the cutouts are smaller than the Orzly which makes it look a lot better without having huge areas for error. The glass itself feels great, not quite as good as the actual screen but close.
I definitely recommend it after these first couple of hours.
The second picture (taken outside) with the Orzly Fusion case, the first (inside) is with the One Plus Sandstone case. When I switched cases, the popping came back, so that just means the Fusion case was holding down the sides enough to keep it all stuck down, which works for me as I rarely have my case off.
I can update again later on if anything happens. I've already broken 3 TGSP already.... Haha
Click to expand...
Click to collapse
Any rainbow?
iRhyiku said:
Any rainbow?
Click to expand...
Click to collapse
No rainbow, at all. No dots either.
With the no dots though, its causing that popping sound. It's not that bad and not noticeable at all with the case on.
This might sound pretty ridiculous, but it's really reflective. I don't need a mirror anymore.
Update.
I am noticing some small dots now, and I've had my case off all yesterday and today and very minimal popping.
This TGSP is really clear. I really like it. I still recommend.
ab7casper said:
Update.
I am noticing some small dots now, and I've had my case off all yesterday and today and very minimal popping.
This TGSP is really clear. I really like it. I still recommend.
Click to expand...
Click to collapse
does it have adhesive across the entire glass or just the black edges?
byt3b0mb said:
does it have adhesive across the entire glass or just the black edges?
Click to expand...
Click to collapse
Not the entire glass, which is causing the popping as its not very sticky.
been using it since last night. It's OK.
It is a quality piece and does cover the entire screen. Doesn't hinder screen usage (that much) but I don't like the bubble (more like air gap) between the screen and protector as only the blacked out edges adhere to the glass. and yes it makes popping noises and finger taps are loud too. Using with spigen rugged.
Its weird but not bad. I'll still probably end up switching to something that bonds to the glass. Any suggestions?
Mine has gotten a lot.... A LOT of dust under the screen near the fingerprint sensor, and going up. I'm going to take it off tonight and wash it with water and see if there is something that can be done with its unstickiness to make it better.
I can confirm that it is not compatible with the OtterBox
I also bought this tgsp only found 2 issues
1 lack glue so don't stick very well and makes poping sound when touch the screen ( I'm thinking on putting some glue, but don't know which one don't harm the screen)
2 the bezels cover like 2-3 pixel lines at lateral edges like op3 official curved does.
I'm using it with J&D cover and fits perfectly, as mentioned in post above, is not compatible with OtterBox case
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus one ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I couldn't find one like stock so I opted for a glass one mad by SuperShieldz.
I had used them before.
Works pretty well and I'd give it about a 4.5/5.
Frankenscript said:
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
Been using the one you posted for a month now and it's great. Perfect fit and even covers a lil bit of extra room at the bottom so if you're using nav gestures you won't be peeling at the bottom of it.
I used to use Armor Suit film protectors exclusively on all of my phones. May want to give them a look. I never had any issues with them at all.
Frankenscript said:
Hi folks,
I'm used to using TGSP, and I bought one of the OP TGSPs for the 6T, but for now I'm leaving it unopened. I actually like the factory-applied plastic film, except for the fact that it picks up scratches so easily.
Is there a more durable or self-healing plastic that has that same slick feel and edge-to-edge coverage? I'd like to replace my factory one with a similar-but-less-scratchable alternative without adding the thickness of glass and without losing edge to edge coverage.
I've read lots of these threads but there are so many opinions and most of the action is around TGSP.
I'm in the US, so please focus on ones available here.
My current best guess from Amazon is the IQ Shield one.
Thanks!
Click to expand...
Click to collapse
I'm using that one now. Closest to the stock one. Doesn't scratch easy at all. First try had 3 specks under by earpiece. 2nd attempt I have 1 speck in middle but it's liveable. I would definitely recommend it. The tgsp just blocks the edges. I didn't even have to retain fingerprints
Ok, I ordered it. Will install this weekend. Kinda scared to remove the factory one but it's already scratched after a month, and my phone lives in a case most of the time.
Will report back how it goes. Is it wet apply or dry?
Sent from my ONEPLUS A6013 using Tapatalk
Last night I removed the pre applied protector and put on the IQ shield one. It was an easy wet apply process. Got it on fine though maybe close to a mm too low; after it had mostly dried out by this morning I had a bit of an edge at the bottom where the screen curves. I burnished it down and hope it will stay. The protector is pretty full coverage, with a notch for the camera.
It was easy to work out the few bubbles while everything was wet, and I looked at the phone on edge using light reflections to see bumps to be squeegeed out. As expected there was some distortion while it was still wet, so I just set the phone aside until morning.
Fast forward 10 hours, and the distortion is gone. There is a definite orange peel "microbump" effect on the screen protector surface; hopefully that will diminish as it continues to dry out.
It's also not as slick as the original pre applied protector, at least not yet.
Let's see how it goes and will report back in a few days.
Sent from my ONEPLUS A6013 using Tapatalk
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Frankenscript said:
Approaching 48 hours. The IQShield protector is doing well. It feels a bit slicker to my touch than it used to, perhaps due to a slight haze of finger oils after being used for a while, or perhaps because it's fully dry now.
It still has the orange peel ripple effect on the surface. I'm attaching a picture of what a reflection of light looks like on it, so you can get an idea:
View attachment 4696222
The material is soft; if you drag a fingernail across it, it will leave a trail until it squishes back out. This is the "self healing" property. Reminds me of the coating on the screen protector I had on my 3T.
I was hoping for a smoother, "harder" surface with the IQShield, but it is a high quality product. If you are looking for a full coverage plastic screen protector and like the slightly squishy self healing type, this one is a no brainer. Excellent wet apply process and it seems robust. If you are looking for "a replacement for glass, but something that won't break" this probably isn't for you.
I'm going to live with it for a month or two and see how I feel. I may eventually remove it and replace with a glass TGSP.
Click to expand...
Click to collapse
Thanks for your review/input. I was torn between this or the Skinomi one. I had a TGSP before from Omotion with the oem case and it landed face first and cracked the digitizer because it sat flush with the lip of the case. It was my kinda my fault though because I knew this and was waiting on my Rhinoshield bumper and couldn't wait to slap on my TGSP. Anyways got it fixed and always kinda wanted the orangy look because I never could afford Zaggs years ago [emoji38]
Sent from my ONEPLUS A6013 using Tapatalk
I remember the Zagg protectors! Had one on my DroidX in ~2010. Good product but it absorbed dye from my holster case and got gradually darker in regions of it where it had most contact with the inside of the holster. I sent it back eventually and got a free replacement; good warranty. I hope this IQShield one won't darken...
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
vegetaleb said:
Plastic protectors need 7 to 10 days to settle down and give a glass like feeling
Click to expand...
Click to collapse
Where did you read that?
hRAQyfb1oz said:
Where did you read that?
Click to expand...
Click to collapse
3 years experience
Couple weeks in now. Really liking the self healing protector. Sure it has a bit of orange peel effect but that doesn't impact use. It has held up well so far.
Sent from my ONEPLUS A6013 using Tapatalk
I will have the wet imak film protection any time now, though I wonder if I apply it or keep the stock one.
For people who applied third party film protection do you recommend it or no difference with stock?
IQshield is self healing and soft squishy not flat like the stock one. I like it after some use.
Sent from my ONEPLUS A6013 using Tapatalk
Prism from dbrand
MrPhilo said:
Prism from dbrand
Click to expand...
Click to collapse
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Im in the same boat as OP.
Really liked the pre-applied screen protector the 6T came with (does Oneplus not sell that one?)
Lasted about 2 months, but I really liked how clear it was.
I ordered the IQ Shield one, and while good, it has the orange skin effect going on that the included didnt have. Any recommended options for clear flim protectors for the 6T?
formicae said:
Doesn't fully cover the visible screen area, same as many cheaper protectors.
Click to expand...
Click to collapse
Yep, put mine on today, it sucks. Doesn't cover the whole screen, makes it look a little grainy, just a crappy product. Yeah maybe it's super strong but what's the point of it makes using the device a poor experience?
Hope to make this thread as a collection of reviews and Q&A for various screen protectors. Noticed several reviews for some before the device was even released. Hopefully this thread helps others and a way for you to share your experiences.
OMOTON 4-pack
https://www.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Pros:
Covers the whole display (left to right)
No halo or rainbow effect
Leaves enough gap for a case
CHEAP (includes 4)
Cons:
Peeling the dust remove sticker was a pain.
Doesn't cover class between camera and earpiece
Other thoughts:
the glass is quite thin. Less than .33mm which is the norm. Probably will make it not so durable when drops and possibly easier to crack. But nice as it doesnt feel sharp or large on the display
This glass is a precise fit, so be careful on installation. Good thing if you mess up, there are additional ones. .5mm left/right or up/down probably will cause a halo affect for that edge
The results:
https://youtu.be/Zg1I4-MNCXk?t=125
Thanks for getting this started, tlxxxsracer! I'm going to mimic your format to the best of my ability. I'm going to include a Comments line as I don't have images or videos to link to.
Yocktec Screen Protector
https://smile.amazon.com/gp/product/B07QTZ9XPP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Comments: I gave this a 3 star rating. It's acceptable as a "until I get a better one" protector but not one I'd consider for long term.
Pro's:
Feels like decent quality glass for the price (strength, clarity, etc.)
Simple installation
Well gapped for a case
Con's:
Bad edge lifting/poor contact
Not particularly cheap given it's just one in the box
Somewhat difficult to line up given how the glass it cut for the front camera/speaker.
UniqueMe Screen Protector (3 Pack)
https://smile.amazon.com/gp/product/B07QKCFS9N/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
Comments: I opened this and immediately filed for a return. I laid one of the 3 pack onto my screen and it was too large to work with most cases, and part of the edge was going to go over the slight curve on the edge of the glass. Not worth even trying.
Pro's:
N/A, didn't even try
Con's:
Too large, will almost certainly lift off at the edges
L K Screen Protector (3 Pack)
https://smile.amazon.com/gp/product/B07NM4MRFQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Comments: What's currently on my phone. First to install had two large air bubbles because I just kind of threw it on there as I'm used to doing with most tempered glass protectors, second I went slower and it's good. There is some slight lifting on the edge in a couple of spots, and small air bubbles in the regions that the protector covers but aren't part of the actual visible screen. I'm going to stick with this until some of the bigger name brands start releasing stuff, namely second versions as the first go is rarely great, and keep the third of the pack as a backup.
Pro's:
Cheap
Quality is good. Feels strong, clarity is nice, etc.
Good coverage of screen while still allowing enough of a gap for cases to fit.
Con's:
Installation isn't as easy as I'm used to. I don't think it's a "designed to be installed how we show" you kind of thing, just a bit finicky. (Note: Not actually difficult, just go slow and follow the video they link you to in the box)
Related to above, I feel like their instructions will inevitably waste at least one protector for most users as there will be dust and/or air bubbles collected this way. You're not likely going to get it perfect on your first go. (Note: Which is why a lot of people will read this and think, "well that's why they include 3, dummy" which is a fair point, but I wanted to bring it up)
Very slight edge lift
Glass it cut so between camera and speaker there is a large exposed area (Note: doesn't bother me personally, but I know some people don't like that)
Supershieldz 3 Pack
https://smile.amazon.com/gp/product/B07Q1KCT3M/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
Comments: Didn't install. Looks very similar to the L K tempered glass in size, but based on Caebron's comments below I figure it's not removing the L K I have on to try.
Space held for Supershieldz commentary
I've got a 3 Pack of these coming in the mail tomorrow. I know a lot of people like Supershieldz but I haven't liked a single one I've gotten. I got them mostly to see if I just got bad ones in the past or if everyone's just crazy. Unlikely to install it given that the L K's nice, but I'll comment on them.
tlxxxsracer said:
Hope to make this thread as a collection of reviews and Q&A for various screen protectors. Noticed several reviews for some before the device was even released. Hopefully this thread helps others and a way for you to share your experiences.
OMOTON 4-pack
https://www.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Pros:
Covers the whole display (left to right)
No halo or rainbow effect
Leaves enough gap for a case
CHEAP (includes 4)
Cons:
Peeling the dust remove sticker was a pain.
Doesn't cover class between camera and earpiece
Other thoughts:
the glass is quite thin. Less than .33mm which is the norm. Probably will make it not so durable when drops and possibly easier to crack. But nice as it doesnt feel sharp or large on the display
This glass is a precise fit, so be careful on installation. Good thing if you mess up, there are additional ones. .5mm left/right or up/down probably will cause a halo affect for that edge
The results:
https://youtu.be/Zg1I4-MNCXk?t=125
Click to expand...
Click to collapse
I also recommend the Omoton 4 pack here:
- https://smile.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Never bought this brand before but it worked perfectly on the first one. The 3a XL's display seems to be much flatter than the 2xl and 3xl which were a nightmare with putting on glass screen protectors. So happy to not have one with a black border around it again!! :fingers-crossed::fingers-crossed::good::good:
jppowers said:
Space held for Supershieldz commentary
I've got a 3 Pack of these coming in the mail tomorrow. I know a lot of people like Supershieldz but I haven't liked a single one I've gotten. I got them mostly to see if I just got bad ones in the past or if everyone's just crazy. Unlikely to install it given that the L K's nice, but I'll comment on them.
Click to expand...
Click to collapse
I just installed these and will be returning them to Amazon for a refund. The pack includes two shield, and while I was able to work out any trapped airbubbles by pushing them towards the edge of the screen, and any remaining small bubbles disappeared over night, they always leave an airbubble at one or more of the edges. It looks as if you could slide a fingernail underneath - which you can't so it's just this long elongated airbubble that makes it look as if it isn't sticking at the edge of the screen.
Ordered myself a Zagg this time - I will report back on how it works.
I also used the Omotion 4 pack,,,it covers about the same as most and fingerprints are not as noticeable as they are on some others.
3 pack I picked up. super smooth bonded pretty well. Thick so should be decent protection. though it barely covers left and right of actual screen area. not sure how much wider it could go because of the curved edges of display.
amazon.com/gp/aw/d/B07PVQ2LYB
I got the LK as an interim. They are certainly not bad, but I'd like something with a more complete coverage and also less sharp and thick edges. For my OnePlus 6 I had protectors from ******* that were decent...but not perfect either. I hope we'll get good one for the Pixel soon...
Also bought a Zagg. The guy at Best buy installed incorrectly. I ordered a replacement since it has a lifetime warranty. Will report back once I get the replacement installed properly.
Super surprised how well they installed, yes they have the black lining all around, full adhesive. No issues installing. Perfect alignment without a tray ( no screen leak on either sides). Good price and no loss of screen sensitivity.
Definitely recommended
Case friendly too
TekRoot 4 pack from ebay
Pros: perfect cut, resist smudges well, easy to apply, full glue, work well with a case, dirt cheap.
Cons; Halo around the border due to glue, maybe not enough of it, or bad quality.. other than that, for $2.25 a piece in package of 4 with shipping included, I can live with the borders not completely adhering to the screen.
I was happy with the CASEVASN screen protectors. Not sure why it's reviewed so poorly.
https://www.amazon.com/gp/product/B07R4HC87D/
I don't like the notch on the OMOTON and prefer the cutouts. It has basically zero room for error, but I eventually got it lined up perfectly with the sticky tab hinges, and it has plenty of space on the sides for a case. No bubbles or distortion.
Got my replacement Zagg, the screen feels really nice and there are NO fingerprints at all. But there's no room for error on the install and the thing that's meant to help line it up sucks, way too easy for the protector to get underneath it. Because of the huge gaps on the sides, it's almost impossible to install properly. I'd stick with a full adhesive black boarder protector, definitely not worth $40.
Edit: after just a few minutes of use, the phone is covered with fingerprints. Again, would not recommend.
---------- Post added at 11:55 PM ---------- Previous post was at 11:23 PM ----------
jsanta11 said:
Super surprised how well they installed, yes they have the black lining all around, full adhesive. No issues installing. Perfect alignment without a tray ( no screen leak on either sides). Good price and no loss of screen sensitivity.
Definitely recommended
Case friendly too
Click to expand...
Click to collapse
Looks like a ton of fake reviews on Amazon, doesn't give me the warm fuzzies. Have any pictures of it installed? I don't understand how it could have black boarder and be case friendly. I'm looking for something not case friendly, doesn't seem to be many options
xxBrun0xx said:
Got my replacement Zagg, the screen feels really nice and there are NO fingerprints at all. But there's no room for error on the install and the thing that's meant to help line it up sucks, way too easy for the protector to get underneath it. Because of the huge gaps on the sides, it's almost impossible to install properly. I'd stick with a full adhesive black boarder protector, definitely not worth $40.
Edit: after just a few minutes of use, the phone is covered with fingerprints. Again, would not recommend.
---------- Post added at 11:55 PM ---------- Previous post was at 11:23 PM ----------
Looks like a ton of fake reviews on Amazon, doesn't give me the warm fuzzies. Have any pictures of it installed? I don't understand how it could have black boarder and be case friendly. I'm looking for something not case friendly, doesn't seem to be many options
Click to expand...
Click to collapse
Am with you on that, I just purchase and test, I don't trust most Amazon reviews cause like you mentioned plenty of fakeness, but yes it has the black borders and case friendly, once am home I will upload pics. My biggest surprise is the no screen leak on the sides, **** they did a good job with the size..
Just received my omoton 4 pack. It doesn't cover the whole screen as the OP reviewed. Must be a new batch as it was backordered for a few days.
Here are the pictures of the screen protector installed
Black border
Full adhesive
Perfect alignment
No screen leak on the sides
jsanta11 said:
Here are the pictures of the screen protector installed
Black border
Full adhesive
Perfect alignment
No screen leak on the sides
Click to expand...
Click to collapse
Just ordered, looks great. Thanks for sharing!
Update: just received. Much easier to install than the Zagg due to the edges getting much closer to the edges of the phone. The cutouts are so precise you can line the whole thing up based on them. It might cut off a few pixels on the sides, but overall I'm very impressed. Fingerprint resistance seems to be MUCH better than the Zagg. Don't waste $40, buy this!
Update 2: have noticed this screen protector actually hurts screen quality pretty noticeably. Not sure why, but in some apps (especially apps with lots of white), it's VERY annoying
I also recommend the pulen. fit is perfect and I don't notice any issues with transparency or responsiveness.
I picked a 3-pack of LK, non-bordered, up. Took a little more time than I usually do lining everything up with the included guide stickers. Most other phones the cutouts are precise enough for me to eyeball, but since this one just has a huge cutout at the top for the camera all the way to the speaker, not so easy to do. Went on perfectly and so far haven't had any issues with the edges of the glass, and I don't have any blue discoloring at the edge. Protector is *just* the right size for the screen, so thinking the extra time taken to line things up served me well.
Can't take pictures because the only other device I have at the moment is a Huawei Mediapad M5 running PHH-treble and the camera doesn't work on it for whatever reason.
Link - https://smile.amazon.com/gp/product/B07NM4MRFQ/ref=ppx_yo_dt_b_asin_title_o04_s02?ie=UTF8&psc=1
tldr; these work well, take your time
https://www.amazon.com/gp/product/B07Q29VVX7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I bought those and it applied with no halo and bubbles, and I am very happy with my purchase
comes with 3 and they have a lifetime warranty
luigi90210 said:
https://www.amazon.com/gp/product/B07Q29VVX7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I bought those and it applied with no halo and bubbles, and I am very happy with my purchase
comes with 3 and they have a lifetime warranty
Click to expand...
Click to collapse
Any pictures?