Related
Hello XDAérs,
I unfortunately bricked my phone. I started with downloading ODIN and CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4. I was able to get into the download mode and open the .tar. This was succesfull, I got to see my homescreen after the reboot. After that I made a backup using CWM.
And this is where I made the mistake. I opened CWM and opened cm_galaxys2_full-65 by using Flash an update. The device booted and started to install this and afterwards got stuck at the yellow warning sign!
I was hoping to fix this by going to the download mode and using ODIN again but this didn't help.
How can I fix this?
#UPDATE: Can i fix this anyway in the ClockworkMod Recovery (Sound up + Home + Power ) ?
Greets
restore your backup
hold up instead of down when you start your phone..
down=download mode
up=recovery...
when restore is not helping try restore wipe... all data will be lost..
I accidently pressed backup instead of restore... -.-. But I chose the oldest backup afterwards. This didn't work and also a restore swipe didn't help.
Before you gave me this advice I had tried to install the .tar file threw ODIN again, might this have made the back-up and restore impossible?
miniAnViL said:
I accidently pressed backup instead of restore... -.-. But I chose the oldest backup afterwards. This didn't work and also a restore swipe didn't help.
Before you gave me this advice I had tried to install the .tar file threw ODIN again, might this have made the back-up and restore impossible?
Click to expand...
Click to collapse
No it doesn`t matter.
If you want to install CM7 go back to recovery Volume up + Power
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Format System in mounts and storage
Flash the rom and google apps
Done
Hey,
I followed your instructions but when installing the .zip file the installation gets aborted.
Should I try apply /sdcard/update.zip?
thanks in advance
miniAnViL said:
Hey,
I followed your instructions but when installing the .zip file the installation gets aborted.
Should I try apply /sdcard/update.zip?
thanks in advance
Click to expand...
Click to collapse
NO, turn the phone off and go back to recovery and try again.
If that doesn`t work turn the phone off, go into download mode (volume down and power) than yes (power up) and flash a stock rom for your country with Odin.
---------- Post added at 05:18 PM ---------- Previous post was at 05:14 PM ----------
Or if you have a working backup as i read in yout thread restore the backup
use recovery wipe everything data, cache and dalvik and see what happens...if that does not work if you can get into download mode flash litening rom with odin and you should be fine..
once you got litening rom on then check what rom you want to put or just go back to stock from the region you from
Hey, I installed the stock rom and did it all over again, and now it works! Thanks for your help
miniAnViL said:
Hey, I installed the stock rom and did it all over again, and now it works! Thanks for your help
Click to expand...
Click to collapse
Congratulations
miniAnViL said:
Hey, I installed the stock rom and did it all over again, and now it works! Thanks for your help
Click to expand...
Click to collapse
well done mate..
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Cupuffy said:
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Click to expand...
Click to collapse
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
demondor said:
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset(wipe) is an option in cwm(3rd from above) wipe and reflash the rom and let it boot,this can take 10min
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
hisee said:
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
Click to expand...
Click to collapse
I don't know how to check md5, but I already did the wipes and resintall several times, it still loops back into Recovery mode everytime
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
demondor said:
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've tried it just now and its still not working...
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Huupie said:
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Click to expand...
Click to collapse
How would put it into my internal SD if I can't transfer the file because I can only boot into Recovery or Download mode? Do I just Odin it straight in via the PDA option?
If you connect your phone with the PC while in recovery you should be able to use adb commands
Put the rom file into the adb folder than try
Code:
adb devices
now you should see any cryptic combination of letters and numbers in the next row
(if you see a empty row... that wouldn't be nice^^)
then do:
Code:
adb push yourromfile.zip /sdcard/yourromfile.zip
than try flashing again the new file
dont forget to do a full wipe, cache wipe, dalvik wipe, the common procedure^^
PS:
If you don't know about adb, it is installed with the android sdk, but you can download it seperately
place the ADB folder somewhere on you system hd, maybe directly to C:\
the open cmd and type
cd C:\ADB\
now you're able to use the above commands
You can put it on an external sd and flash it from there...
Verstuurd van mijn GT-I9300 met Tapatalk
Thank you, all of you... I will try this tomorrow and tell you guys how it goes!
Thank you so much EVERYONE, It all worked out, seems like the original file was corrupted, now running omega 10 smoothly!!!!!!!
Okay, So.. As the title says, i have googled for DAYS, Tried every damn thing i could get my hands on..
Now.
So far, im able to get into download mode, and also into recovery mode, I've tried doing a factory reset, and then flashing a stock rom, and i've tried every concevable method of fixing this damned phone, Its driving me crazy, I flash a new rom with odin, phone reboots, (adds to count) and is STILL stuck at that ****ty flashing samsung logo..
I'd really appreciate ANY help i can get, And i AM a noob at this, So i dont FULLY understand EVERY detail of this, But i've read around enough to know a few things.
My SGS3 has been out of commision for longer than i've actually used it.. So.. Yeah, Getting quite desperate!
Please let me know if there are any particular details yyou need!
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm :good:
try this first before thinking of efs errors!
.
exprxp said:
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Click to expand...
Click to collapse
Please elaborate, How would i do this with odin?
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
Click to expand...
Click to collapse
Pretty sure that i've done this by accident, But will try again to be 100% sure, Ill get back to you.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm
try this first before thinking of efs errors!
Click to expand...
Click to collapse
Again, Please elaborate, How do i go about doing this, I've never seen an option to delete the 'Dalvik cache'
Thank so damn much for the help so far guys, i really appreciate it!
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
loriz said:
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
Click to expand...
Click to collapse
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Bäcker said:
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Click to expand...
Click to collapse
i just want to clarify... when you say 'flash STOCK rom' Do you mean i need to get a rom for a SGS3 VAU (Vodafone Asutralia) and flash that (go to odin, put it in PDA, etc)
and if THAT is the case.. Where would i get said rom, Because i've downloaded it from sammy firmware 4 times, each time it finishes the download without a hitch, when i go to extract the zip to get the needed files, it says its corrupted or some such BS..
Go to Sam mobile and download the firmware mate.
You will end up with a tar md5 file you flash using PDA section of Odin.
Good luck!
Sent from my GT-I9305 using xda app-developers app
Kies is by far the easiest and safest way to factory reset. I have had to use it about 3 times in the past 6 months because I have flashed something I shouldn't have. Plus Kies now has a lite mode that is quicker at flashing your phone back to stock firmware.
serbpower said:
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
Click to expand...
Click to collapse
Slightly puzzled by you not having an "advanced" menu option. Which CWM version do you have?
Okay guys it seems ive fixxed my s3, after 4 long months lol..
What i did:
Installed Kies, Got my phone into download mode, Let kies to a PROPER wipe of the phone, (Phone, pds, csc) and it just ****ing straight up fixed everything...now i just need to find a thread that shows me how to COMPLETELY backup my ENTIRE phone, Every damn fkn Kb.. And ill be rooting it again lol
Thanks everyone!
Hello,
I have a Samsung I9100 and today I tried to downgrade from CM10.1 to CM9. I flashed roms before on both my S2 and TF101 and had never any problem.
Problem: Flashed the kernel, did a reboot recovery. when it tried to boot it started to produce black and white stripes. Happens also when i try to start in recovery.
Info : -Rom that i had before is cm-10.1-20121218-NIGHTLY-i9100. Had no problems with that one.
-Kernel that i used, Kernel_CM_9.1.0_SR_CWM_Flashable. I found this here, http://forum.xda-developers.com/showthread.php?p=29158659.
How: I used this instruction: http://forum.xda-developers.com/showpost.php?p=29573841&postcount=7, But i didnt do the dalvik wipe.
Reason: I think it because I used the Kernel from the wrong phone (STUPID), I just discovered that when i am writing this.
Is the phone bricked? What should I do?
Video: http://www.youtube.com/watch?v=2owvUnIX-dE
Photo attached, picture after 1 minute.
Thanks,
Moreno
Try to flash stock rom maybe it could help
Could you go to download mode ? If yes try to flash siyah kernel( not boot) or Dorimanax and then downgrade(flash cm9)
Regards,
Paulius
Spoiler
XDA the best
Moreno666 said:
Hello,
I have a Samsung I9100 and today I tried to downgrade from CM10.1 to CM9. I flashed roms before on both my S2 and TF101 and had never any problem.
Problem: Flashed the kernel, did a reboot recovery. when it tried to boot it started to produce black and white stripes. Happens also when i try to start in recovery.
Info : -Rom that i had before is cm-10.1-20121218-NIGHTLY-i9100. Had no problems with that one.
-Kernel that i used, Kernel_CM_9.1.0_SR_CWM_Flashable. I found this here, http://forum.xda-developers.com/showthread.php?p=29158659.
How: I used this instruction: http://forum.xda-developers.com/showpost.php?p=29573841&postcount=7, But i didnt do the dalvik wipe.
Reason: I think it because I used the Kernel from the wrong phone (STUPID), I just discovered that when i am writing this.
Is the phone bricked? What should I do?
Video: http://www.youtube.com/watch?v=2owvUnIX-dE MAN, THAT IS JUST NASTY!
Photo attached, picture after 1 minute.
Thanks,
Moreno
Click to expand...
Click to collapse
You can go to download mode, pretty sure of that. If you can't a jig will do.
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
ankur.co.in said:
Try to flash stock rom maybe it could help
Click to expand...
Click to collapse
And then, listen to this guy.
Okay, first of all thanks for the fast respons. I could fix the problem.
But after everything was oke, I wanted to flash my rom from RR_JB_V3.1.3._AOKP_4.2.1. to RR_JB_V3.1.2._AOKP_4.1.2.
Installation went fine. Then I did reboot and It get stuck in boot screen (Screen from samsung with yellow triangle).
Luckely I made this time a Titaniumbackup and a Back Up from the Recovery option.
Any suggestions?
Thanks
Moreno
Did you wipe data, dalvik cache and cache...
Regards,
Paulius
Spoiler
XDA the best
1.- Wipe data / factory reset (mandatory if you coming from ICS version or another ROM)
2.- Install the Main ROM
3.- In AROMA installer select "Custom Installation"
4.- Choose depending of your taste
5.- When AROMA installer finish untick the "Reboot Now" option
6.- When you're back on recovery go to Advanced
7.- Wipe Dalvik Cache
8.- Fix Permissions
9.- Wipe Cache Partition
10.- Reboot
This was the instruction and wasnt sure if the option was Unticked or ticked at step 5, so i continued without touching it. After that it was stuck.
so....you're still stucked at the logo...flash a stock rom so your device won't look like it's gonna blow.
You need to untick and wipe dalvik cache, Fix permissions and then wipe cache and reboot follow all instructions... Do not skip anyone step...
Regards,
Paulius
Spoiler
XDA the best
Sorry i am not really clear about the situation. When I tried to flash RR_JB_V3.1.2._AOKP_4.1.2, I forgot to untick "Reboot Now". So there was no dalvik wipe and no cache wipe.
Now the s2 gets stuck in the boot screen (Yellow Triangle) when I try to normal start it and I cant go in recovery mode, it gets stuck boot screen (Yellow Triangle)
Only option is Download mode.
So should I flash stock rom with odin? Is this the right one, >>>>>http://stockroms.net/file/GalaxyS2/GT-i9100/4.1.2leak
Sorry guys for my stupidity
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
there you go.
gastonw said:
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
there you go.
Click to expand...
Click to collapse
I did this.
Is it now possible to flash this rom RR_JB_V3.1.2._AOKP_4.1.2.?
Yes. Just follow instructions
Regards,
Paulius
Spoiler
XDA the best
Paulius7 said:
Yes. Just follow instructions
Regards,
Paulius
Spoiler
XDA the best
Click to expand...
Click to collapse
It says "Failed to verify whole-file signature" after instal the rom. That means its not rooted, right?
Click on " toggle signature verification" and then try to flash but I think md5 is corrupted(I don't exactly) try to download rom again...
Regards,
Paulius
Spoiler
XDA the best
Moreno666 said:
It says "Failed to verify whole-file signature" after instal the rom. That means its not rooted, right?
Click to expand...
Click to collapse
No, it doesn't. Some file maybe corrupted or changed. Re-download it.
When i flash RR and do this time everything by the instructions, including wipe dalvik and cache, I still got the same problem that the phone gets stuck in the bootstartup (yellow triangle)
Go to cwm recovery and wipe dalvik, fix permissions, wipe cache
Regards,
Paulius
Spoiler
XDA the best
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
wrong gapps. wipe system and repeat with the correct ones
Please, I know it may seem like I am a some n00b who just registered for answers, but I really need them. I've been browsing this forum (unregistered) but just haven't had anything to post as of late. Sorry guys, I really need help! And you members are the ONLY ones I can turn to at this moment.
Thanks so much, I really appreciate any help!
Glebun said:
wrong gapps. wipe system and repeat with the correct ones
Click to expand...
Click to collapse
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
format system from recovery. Google it. then re flash the rom with the correct gapps
Glebun said:
format system from recovery. Google it. then re flash the rom with the correct gapps
Click to expand...
Click to collapse
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
killakk said:
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
Click to expand...
Click to collapse
In advanced format system
Sent from my GT-I9300 using xda premium
killakk said:
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
Click to expand...
Click to collapse
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Glebun said:
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Click to expand...
Click to collapse
Sorry dude, you've got me confused. I've googled that to no avail, sorry for being a n00b. I really need your help mate!
Ver3go said:
In advanced format system
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey dude, thanks for the reply but how can I go to Advanced Format System pal??
I'm sorry but I'm a n00b and my phone does not start up, keep getting the cyanogen mod logo and after that the errors "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped".
Please help!
Sorry guys I know I'm making it hard on you all because you're having to explain everything to me but I really need help on this, sorry if I'm being a nuisance but I'm really going crazy in the head right now
killakk said:
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
Click to expand...
Click to collapse
wiping from CWM recovery or stock samsung recovery?
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Glebun said:
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Click to expand...
Click to collapse
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
sriram231092 said:
wiping from CWM recovery or stock samsung recovery?
Click to expand...
Click to collapse
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
Click to expand...
Click to collapse
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
sriram231092 said:
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
Click to expand...
Click to collapse
Thank you so very much dude, I love you!
killakk said:
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
Thank you so very much dude, I love you!
Click to expand...
Click to collapse
:good: :good:
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Click to expand...
Click to collapse
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Glebun said:
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Click to expand...
Click to collapse
This was already solved
What was that post for anyway ?
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Take that into acount next time please.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
This was already solved
Click to expand...
Click to collapse
hence the "next time"
Ver3go said:
What was that post for anyway ?
Click to expand...
Click to collapse
for showing him how easy it is to solve problems yourself instead if asking
Ver3go said:
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Click to expand...
Click to collapse
I didn't pick on him nor was I being aggressive. Searching is THE BEST way to learn.