Hello xda.
First of all I want to applogise for individual thread, but I'm desperate because I think I f**ked my phone..
The problem is that the phone doesnt want to connect to USB anymore..
I'll try to explain how I get there.
I rooted my phone. I did it like this : watch?v=wLQ51Pg77q4
All good till here.
Then I wanted to install Galaxy S4 Weather Widget Tried it like thid dude - /watch?v=pCeBOz8bxlc
I downloaded Astro File Manager and Solid Explorer trying to replace the Weather Widget.
Astro couldn't delete or replace those files and I finally managed to delete them with Solid Explorer one by one ( couldn't delete all of them together ) and copied the S4 Weather Widget ones.
The problems started when i restarted my phone. When I added the widget the screen started to flicker.. couldn't to anything about it so I decided to install the original firmware 4,1,2 JB.
I downloaded it from the internet and installed with odin what I tought it would be the original JB 4,1,2 for S2 like it stated in the description but I don't think it was the original one.. ( exact same kernel as I had - I bought the phone with 4,1,2 JB installed )
Sinced I managed to fix my phone ( I tought that way ) I rooted again and installed Titanium Backup.. and deleted ChatOn.. ( I wanted to delete all unnecessary apps )
After reboot the phone couldnt boot.
I flashed again the firmware I found on the internet and wanted this time to only install Galaxy S4 Weather Widget and nothing else ( except games and "normal" apps )
I could't do it again and I gave up.. and tought that if I go to Settings > Factory Reset and reset the phone I will have it clean and I'll stop installing things I couldnt do..
But..now the phone does not recognize anymore USB Cable and i have some serious bugs, like the phones sometimes charges when i connect charger... sometimes it does not.. the battery % drops from 99 % to 87 % very very fast..
To make the long story short I want to install the original JB 4,1,2 for Galaxy S2 but I can't do it because my phone charges sometimes when i connect it to USB but it doesn't 'see' it and I can't hear that sound that PC used to do when I connected the phone and the USB cable ( USB Debugging turned on ).
Pleaseeee helllppppp
my usb port is dying too. phone keeps flipping between car mode and normal charging at like 20 times in a second when sometimes it goes out of its mind,
Q.was this s4 weather widget caper worth making your phone unuseable.
Is it worth someone telling you how to resurrect your phone.....as my guess is your only going to muck it up again by attempt no.3 at that weather widget install.
theunderling said:
Q.was this s4 weather widget caper worth making your phone unuseable.
Is it worth someone telling you how to resurrect your phone.....as my guess is your only going to muck it up again by attempt no.3 at that weather widget install.
Click to expand...
Click to collapse
Q. Does it help you to feel better to be like that ?
I need help to "ressurect" my phone, do you think I'll even download S4 lockscreen from android market if I'll make it work properly ?
But i agree to your message in this post, I was stupid and acted like a child and now i suffer the consequences....
If somebody knows how to fix this pleaseeeee posttttt
So nobody seems to know even on this high-rated forum...
I'm f**ked
try to use a NukeCleaner and flash a custom Rom or stock rom, I prefer Custom rom since it is more updated and has more features
As @KingOfDope said, nuke your phone clean using hawkerpauls script, and i recommend flashing a stock firmware with odin and NOT root it until you have some more knowledge of this stuff... And if you do flash a custom rom, do not ever delete your system files, just freeze chaton if you hate it, and don't take youtube videos as legit instructions, if you want a GS4 weather widget, search in xda and read the whole thread.
Can one of you help me with NukeCleaner pleaseeee ?
Dropmec4 said:
Can one of you help me with NukeCleaner pleaseeee ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100558
Dropmec4 said:
Can one of you help me with NukeCleaner pleaseeee ?
Click to expand...
Click to collapse
I've answered your private message, but i guess i should start a thread with instructions, too many people asking this lately because they don't want to read the thread...
#HarlemShake: okey, so download all the file i just said (rom.zip, gapps.zip, cwm.zip)
#HarlemShake: power off your device
#HarlemShake: hold volume up + power button and home button till you are on the recovery mode
#HarlemShake: choose, install a zip, and choose cwm.zip
#HarlemShake: and when you are on clockwork recovery mode, install a zip again and choose this time the rom.zip and than gapps.zip when you are done, go back to home menu and choose format data, and you are done. reboot and wait (the first boot will take awhile)
Kindofdope helped me and told me to do this in order to "unf**k" my phone.
Cant do that.
When im in recovery mode i only have:
reboot system now
apply update from ADB
apple update from external storage
wide data/factory reset
wipe cache partition
apply update from cache
Dakura said:
I've answered your private message, but i guess i should start a thread with instructions, too many people asking this lately because they don't want to read the thread...
Click to expand...
Click to collapse
Please dont......
And Mr.Weather Widget; that is stock revovery.You need cwm to run that scripts.
Ask anything you like here
http://forum.xda-developers.com/showthread.php?t=1648351
Related
hey,
prehisory:
last night, my phone were somewhere in my bed, cus i fell asleep. the wohle night i'm charging my phone always.
(happened a few times, but i think this time i slept over my phone)
next morning i woke up, picked up the phone & wanted to use it, but it got a freeze screen, was medium-temperatured (not more than a little gaming).
didn't thought anything bad, i pulled out my micro usb charger and forced a restart by contiounsly press power.
problem now:
it booted up as normal but it took really longer than usual. it seemed to freeze sometimes during boot, sometimes i canceled booting, and tried another time..
really really strange behaviors happened, but after a long time just let the phone boot, i got dropped to my homescreeen. all was looking good except the whole status bar just wasn't there. damn.. but ok, tried another 1-2 boots, to see if it get stable after a while but that doens't changed anything..
i can't eitgher get into CWM, just into download mode.
ideas?
i thought overheated but i guess that my phone either would'nt boot up (cpu burned) or stays at black screen (gpu burned)?
so i tried getting into CWM which doesn't worked. then i flashed official samsung ics via odin -> boots up till the coulorized "S" appears, stays in this state, and keep bootlooping (see this when the animation starts by this kind of flowers again)
tried another older stock rom, the same. stock kernel, the same, cf-root with CWM4, the same, i cant even then get in CWM..
any idea??
i'm goin crazy on this.. too much money wasted if this wont work -.-
...........
cabloomi said:
flash a rom like hydrog3n rom, it doesnt need you to fully wipe so most likely you wont get a boot loop, once youve tried that, post here and ill reply
Click to expand...
Click to collapse
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Can you get stock recovery?
From Odin flash cwm, not the CFRoot one. than try it, strange you can get download mode but not recovery.
You have to wipe to get rid of boot loop
Sent from my GT-I9100
beston94 said:
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Click to expand...
Click to collapse
Unfortunately the poster that replied never bothers to read the OP and just shoves out any old nonsense .
jje
so, finally i got it back,
did this howto: http://forum.xda-developers.com/showthread.php?t=1457458
so now i'm back on stock ICS samsungs rom.
flashed the suitable CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.tar
but now i can't access the CWM menue, by pressing power, vol up, home
?
When you say you can't access recovery, what's happening?
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
cabloomi said:
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
Click to expand...
Click to collapse
i did, it doesnt accessed cwm. never mind tryin around solved it.
now all fresh installed off samsungs official, but it isnt as good as before:
still slow bootup, and my status-bar is missing after booting (using latest miui which i also had before this problem, so formerly it was working)
after bootup, touch keys and all other won't response, so if bootup to lockscreen -> wait til screen goes off -> u cant wake the phone, or u have to wait a while maybe it light up for some reason.
any ideas?
hardware damage? i hope not..
no i think you need a good wipeing. but you need to find a way to get into download mode, dont give up try it 3 more time's, dont keep pressing the after the buttons logo apears
try this or its hardware............ you do any deviation and you are on your own.
remove your external sdcard and dont put it back until you are sure your phone works
as per your above post you can access cwm
1: format data / cache / system / sdcard or emmc [system is a must]
2: format preboot / boot [cwm 5.5 or some alternat if option available]
3: download stock i9100 ROM from checkfus (prefer) or sammobile
4: flash using odin, after first boot dial *2767*3855#
5: do not sign in, use for half hour or so, if you think it works sign in to google.
6: do not restore any thing, no titanium backups/restores
7: do not put your sdcard
if your phone works now you know its not hardware now do whatever
thanks mate you strength my opinion and hope that it isn't hardware.
i already had an stock ICS samsung rom on it, with sd mounted all worked fluently and well. (LPH rom). so i flashed a suitable CF-root with CWM, get in there, flashed custom ROM (latest miui + siyah kernel, the same combination i used for month and it worked).
so but what causes these problems i have? before it was fast booting and stable, now slow and the status bar is missing, the rom wont boot up in a normal way, i have to "bully" my phone while boot that i can see the desktop..
?
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
atifsh said:
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
Click to expand...
Click to collapse
yes it seemed like that, but i cant understand why it happened over night? i didnt used the phone and whoos! i woke up and all's screwed up? <,< d**m
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
atifsh said:
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
Click to expand...
Click to collapse
it changed, as i wrote before.
btt any ideas?
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
jackpf said:
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
Click to expand...
Click to collapse
Well I'm using jelly blast no problem... I'm guessing you're using 3.0.5 (latest) did you first flash 3.0.4? If not i suggest going back to stock then 3.0.4 then .5
You might of had some random conflict if you flashed from another custom ROM to Jelly Blast
Also what do you mean radio?
The app? That's included in Jelly Blast, well it is in 3.0.4 (that's what I'm using)
Oh and apparently I'm now meant to tell people to ask questions and stuff in the sticky thread (The one by "iamareebjamal"), or post this in the jelly blast thread to help keep the general section free from spam
The usual Xx James xX only on mobile (XDA Premium)
I think you've lost your IMEI (don't worry it's not lost, this rom somehow can't read your IMEI number). Please check your IMEI number by using *#06# on call screen.
If you can't see your IMEI number, install GalaxyToolbox and check the IMEI from there. If you can see the IMEI from GalaxyToolbox, it means IMEI is still there but rom can't read it.
Please install any other rom. (you can/should backup your IMEI by using GalaxyToolbox before doing anyting on your system)
jelly blast no service fix
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
stuck on boot animation :'(
man wtf stuck on samsung logo only!!:crying:
sam_shah said:
man wtf stuck on bootanimation only!!:crying:
Click to expand...
Click to collapse
Flash stock rom via odin
sam_shah said:
man wtf stuck on samsung logo only!!:crying:
Click to expand...
Click to collapse
What version of the jellyblast rom are you running? Try downgrading the version before the one you are using and repete the steps (do it all at once) try this and post the results
unbricked...and rooted even but not able to install any new ROMs
When i install any new ROMs by CWR then only samsung logo apears with my phone model number..waited for 30 mins no action then back to stock !! Familliar to Rooting nd ROMs in HTC phones.. but wishing to learn for Samsung SGH-s5830i (ace)
Bricked my phone. Need help now
guppysir said:
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
Click to expand...
Click to collapse
Thanks for bricking my phone.....
it doesn't work my phone can't go into CMW or boot now i would be extremely grateful for some help please.
@jrtbing, lets dig some graveyard mate, shall we First of all jellyBlast was band from XDA ages ago ( not to be mention there are far more sophisticated stable Rom @ Dev sub forum)
As for your problem goes, please remove your battery for ~1 Minute ( don't make any difference though, just for discharging purposes ).
put it back and try press and hold the Volume Up + Home keys and then long press the Power key till the start up screen with “Samsung Galaxy Ace GT-S5830i″ logo blinks for two times and you see your desired recovery screen.
If the combo keys provided don't be effective ( due to possible boot loop, corruption of your partitions; kernel ,,etc,,etc,,) we need to check your download mode by pushing (Volume(+) + Volume(-) + Power) simultaneously ,, still no use,, You probably hard-bricked your device mate. USB jig might be your last solution to force your device get into Download mode, nothing will be guaranteed though.
Hi everyone,
First, please excuse me for my bad english
So, I'm here because I have a really big problem with my Samsung I9100.
Indeed, I will explain my problem. I installed the SENTINEL ROM 5.00 a few month ago, and I never had a problem before.
But yesterday, I don't know why, I have so much problem with my Network, (My friends haven't the same problem and we have the same operator, it's Orange)
So, I don't understood why I had this kind of problem. After a few minutes, my GS 2 shut down...
I tried to boot but It had no effect !! I fall in a reboot loop, whith no home screen.
After a panic I try so much solution :
Wipe Data, Wipe Cache, Wipe Dalvik Cache, reboot. Same problem ! Sometimes, I can access to the menu, but a few minute after, it shut down again.
I tried to restore an official firmware, no effect, He can't load, he is blocked with "Samsung animation boot".
I tried to restore with a ROM (Rootbox 3.91), no effect too, I can access temporary to my message, and after a few minutes, he shut down !
Sometimes, I just click in the home button (The only button), and it shut down !
I observed now, it can't book if I don't connect it to the alimentation's cable.
Really, I'm so lost, I understand nothing. Especially, I didn't do something special to make this...
If someone can help me...
Thanks !
Flash stock rom with Odin, re-root your phone & restore nandroid backup or reflash custom rom & start again from scratch.
MistahBungle said:
Flash stock rom with Odin, re-root your phone & restore nandroid backup or reflash custom rom & start again from scratch.
Click to expand...
Click to collapse
Thanks, I will try this, but my sometimes, my USB port of my I9100 has so much problem with the connexion.
Could you give me a link for a stock rom please ?
Thanks mate.
It sounds like you would get into recovery-mode?
Do you have an ClockworkModRecovery?
Can you make a nandorid backup with the recovery?
Do you have an older Recovery you could restore without too much data-loss?
Is the battery ok? Can you start your Phone if you connect it with the charger? If yes I would recommand to backup as many iportant data as possible.
I'm running sentinelRom 5.0 too and I have no problems.
Baerlinaer said:
It sounds like you would get into recovery-mode?
Do you have an ClockworkModRecovery?
Can you make a backup from the recovery?
Do you have an older Recovery you could restore without too much data-loss?
Is the battery ok? Can you start your Phone if you connect it with the charger? If yes I would recommand to backup as many iportant data as possible.
I'm running sentinelRom 5.0 too and I have no problems.
Click to expand...
Click to collapse
Hi Baerlinaer, thanks to answering me.
I had no problem with SentinelRom 5.0 since few month, but yesterday I don't know why, I have so much problem in the same time.
I can access to the recovery mod, and I restore my back up since the recovery mode. I tried to restore 3 differents ROM.
I don't know if the battery is OK cause in the screen, I have 100% but when I disconnect the alimentation's cable. It shut down ! And I can boot but after the first boot animation, It shut down !
I don't care about my data really, it's nice but I just wanna recover my phone with all his fonctionnality !
I alrealdy make a backup !
I am very lost cause I don't know why it do that :/
Can you start the phone withe the cable plugged in but without the battery?
Couse if you can, it is the Battery. I had such a Problem with a Laptop once. The Battery was broken and it rebootet after a few seconds or minutes. I tried everything, to recover it and then I took out the Battery and it run perfectly well.
Baerlinaer said:
Can you start the phone withe the cable plugged in but without the battery?
Couse if you can, it is the Battery. I had such a Problem with a Laptop once. The Battery was broken and it rebootet after a few seconds or minutes. I tried everything, to recover it and then I took out the Battery and it run perfectly well.
Click to expand...
Click to collapse
I can't start the phone whith the cable plugged and whithout the battery. Nothing appeared in the screen.
Dude, are you sure we can start the phone whithout a battery and only with the cable plugged ?
Because now, It can't start...
Sorry, I could't test it untill now, I didn't had my Phone. No we can't do this.
Do you have another Battery for sgs2? Or a friend of yours? Then youcould test it. Otherwise you might try another ROM...
Maybe you can get a stock rom here http: www androidfirmwares net PhoneFirmware Download 69 to do what MistahBungle recommended...
Sorry I could't help furthere more.
Hi,
I tried to install a STOCK ROM. And now, I can't boot my phone ! I installed it with odin.
Now, when I have the booticon Samsung, my phone automatically shut down...
I don't know, I am very lost....
Anyone can help me ?
Tomorrow I will try battery of gs2 of a friend.
Anyone can help me ?
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Cedar1111 said:
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Click to expand...
Click to collapse
Don't think that there are any custom updates. I found this: https://www.youtube.com/watch?v=-IOQJJCSKC4 - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Thanks
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Cedar1111 said:
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Click to expand...
Click to collapse
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
es0tericcha0s said:
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
Click to expand...
Click to collapse
Thanks ,, Any ideas on how I can fix this issue, or install a new rom ?
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
your right, it's not English, therefore I'm outta luck on that. haha although I still watched and tried to see if just maybe I'd catch some insight from it.. but thank you for sharing it with me..
Hello, ive got some Problems with my ne Xcover3
Because the builtin SAP Profile is not working with my cars telephone unit (Premium Volkswagen)
i want to use the app "android-rsap" but there is root needed.
No idea how to get it without bricking the phone.
So it would be very nice to get help by experienced peolpe like you
Thanks ahead
Hi, thank you for using XDA Assist. I can't find anything on XDA on how to root that specific device. but it looks like you can copy the latest SuperSU.zip to your phone and then flash it in recovery. Also see this, http://forum.xda-developers.com/showthread.php?t=1538053
Thank you, but if i understand SuperSU right, the phone must be rooted first?
iam a bit confused
also i think the knox Trigger will be hit?
To use the SuperSU app you need to be rooted. The zip file you flash in recovery. I don't know if it'll trip knox but I'm guessing, yes.
ok i will life with that, so let me tell you my following Actions:
i download: UPDATE-SuperSU-v2.46
put it to my sdcard and reboot in save mode (pressing 3 home on and volume up)
but what to to next? and is the device rooted after that?
sorry but iam not familar with android
I don't know your device and I can't find any information on XDA about it, but can you boot into recovery and find where it allows you to install a zip from the sdcard? You'd need to do that.
in the menü there is a Point:
"update from external device" i can navigate in the folders
but i can´t select the zip file (i put it to the root of the Card)
or should it be extracted?
thank you
Root (sm-g388f)
I would also like root rights on this unit ...
I've done over the recovery flash su version 1.8x but after the start I had the phone off third-party applications with the message "Safe Mode" and it could not be repaired other than by re-recording the original ROM
The question is jerstli version 2.46 or 2.49 beta version can handle it
I will be glad for the advice
... I am sorry for my bad English
i just started 2.46 now i see the andriod logo and downloading ....
do not disconnect usb cable
during the Software update
i think this is showing since 5 minutes nothing happens
do i have a brick now?
My own opinion ... I would have left it until the spawn either error messages or will Torch: D
EDIT: But let me know if you succeeded or not .. or what it's done
phone and Akku are quite warm
but no Change on the Screen
how Long should this Action usually take?
please reply from somebody who did such a update already?
i interupted the process
phone is starting, no root
and biggest Problem so far recovery menue not acessable
allways try to Flash die zipfile
but i allready removed it from the sdcard, so i think its in a Cache?
any idea how to fix that?
ok iam a bit stupid
power + home + vol up = recovery menu
power + home + vol down = flashing from external source?
so no Problem right now but no root
We're going to have to leave it to someone smarter ... or I do not know stim board ... I think you need to unlock the bootloader and perhaps ?? something ??
Hi guys. This thread has gone beyond the scope of XDA Assist so I'm going to ask that it be moved here, http://forum.xda-developers.com/general/help Others with your device may see it and be able to help you
ok thank you, hope this will help
somebody sugested to install first twrp and with twrp it should be able to Flash the su.zip
but as my googleing tells me it must be a specific Version of twrp for the xcover 3 but nothing to find right now
any ideas
I'm not sure but maybe it was a flash from another phone with the same hardware but I do not understand. I calmly tried but we have to order the phone has the same or at least similar specifications
:cyclops:
you are right i think the last galaxy neo is quit similar
Do you mean this model? SAMSUNG GALAXY NEO i9060
Or send what you think
the Galaxy J1 4G nearly got the same specs , same board same cpu .. different ram and camera
but its also not rootable ;(