Hey Guys,
after some research in this forum i decided to root my cynus t5 and flash a custom rom you provide here. Currently im running SamHD, which is really great.
But since this flash im having problems with my mobile reception, which gots really bad. Is there a solution for this? Ive read something about changing the modem.img in the flashable zip, but i didnt find an exact solution or files for that.
Furthermore im not getting a gps signal. While using "gps status" (id=com.eclipsim.gpsstatus2), after a while its showing me 0/12 (fix/satellites)..is there a solution for this?
I really appreciate any help! Maybe the easiest way is to get back to stock rom..but even for this im not getting any solution..
Thanks in advance.
Hi,
Sorry for reactivating that old post, but i got the same problem. (I got a Galaxy Note 4 Rom from Sai RamCharan.) I can not get a gps fix. GpsTest always shows 0/12 and ygps in engeneermode shows status unknown.
I solved the baseband issue by replacing the modem.img with that from the stock rom (extracted from a backup) using a root Explorer.
But i couldn't solve the gps problem. I read that i have to exchange the driver (mtk_agpsd) but it didn't solve the problem.
I would like to know which files are related to the gps driver and service, than i could try to replace them by my backed up files from the stock rom.
Related
Hi everybody! I've got an S3 NoBrand rooted, mounting PAC rom with kernel stock (tryed also googy's kernel) and stock modem.
After installing the first coocked rom 1 month ago (the CM10.2) I found a "secondary" problem to which I have never given much importance but now I would like to solve
From the first boot with the new rom the phone marks me as there is no signal. In fact, although there is network and you connect to the Internet without any problems, the strenght signal icon remains "empty" (see picture to understand better).
[Can't post image because of limited powers of new users]
I have found out that did not depend on Cyano as it lasted one day before I've changed it with the PAC but this issue has remained unresolved ..
I have already tried full wipes data,cache, devilk and cleaning then changing the kernel!
Sorry if I used a bad English but I've already asked on the Italian forum but unfortunately without success!
I'm counting on you!!
THANKS! :good:
(sorry made a wrong post and can't delete it =S )
UP!!! HELP PLS :crying::crying::crying:
Help please!!
Found same problem with Illusion Rom!!! CMON!!
Wipe and flash stock rom and test .
If ok answer is the roms you are using .
JJEgan said:
Wipe and flash stock rom and test .
If ok answer is the roms you are using .
Click to expand...
Click to collapse
Could u help me finding where to download the stock rom?
I've found out that it depends on the model number or something like that but I can't get how to discover it!
up :/
Try this:
http://forum.xda-developers.com/showpost.php?p=32664154&postcount=4
The first website (samfirmware.com) should give you the stock ROM you need
I've installed the stock rom and the Signal icon is working again!
Anyone knows why is giving me such a problem with the other ROMs?
Can't I do anything about it?
I flashed a ROM on my Blue Life Play(very similar to the Qmobile 900a) and after I flashed it, I only get E, and no H(HSPA) or H+. I made a backup before I installed the ROM...but now how do I fix the signal? I was reading some places and it said I need to flash a radio firmware...but there are none that I can find about this.
Any help is greatly appreciated!
Hey guys...
I can tell that Lenovo mobile topics are not a "hot topic" yet inn this forum... But I hope that will change...
I was thinking if anyone could help me on my latest issue...
I installed the custom rom which I got from "NEEDROM" and the version I installed on my Lenovo sisly S90 is the following
ROM: ROM 2 – VIBEUI_V2.0_1504_5.14.1_ST_S90-u
Since than every freaking morning when I wake up and I change my settings from Airplane mode back to normal I get the following installation hint... See pictures... The apps, trying to install are called:
- Hot Girls
- Caller ID
- 2048
- Flashlight
My anti-virus is not flagging anything either.... And I just have no idea where this stuff originates from.
If anybody could help me on that issue would be fantastic.
Thanks a lot
Werwird
I have that kind of experience on my Motorola XT912. What I did was to look for another ROM and flashed . That solved the problem permanently.
Hi , i had installed a cooked miui 8 rom for thl t9 pro that pretty much skrew my imei's and gives an nvram error in Wifi. While i trying to fix this i restored the original rom from en.thl.com.cn but the problem remained. After "experimentation" i format the phone with SP tools completely and now it doesn't find any sim card.
At some forums pretty much suggests to flash the nvram.img file into phone that the official rom don't have . Any Solution to that?
Thank you all in advance and any advice is a good advice
supernova874 said:
Hi , i had installed a cooked miui 8 rom for thl t9 pro that pretty much skrew my imei's and gives an nvram error in Wifi. While i trying to fix this i restored the original rom from en.thl.com.cn but the problem remained. After "experimentation" i format the phone with SP tools completely and now it doesn't find any sim card.
At some forums pretty much suggests to flash the nvram.img file into phone that the official rom don't have . Any Solution to that?
Thank you all in advance and any advice is a good advice
Click to expand...
Click to collapse
Close that post , i have solved it myself after flashing stock rom and using an app called Ghost Phone
Hey guys,
i need your help. Since a few days i cant activate the wlan toggle on my phone. I didnt do anything, just deactivated wlan, and couldnt activate it again. After searching for solutions, i found out that its a relatively common problem, and that my bluetooth also does not work.
If i understood it correctly, i need to flash the persist.img from a fastboot rom to the persist partition. The problem is i cant do that, since my phone is still locked. When trying to unlock it, i get the error code 20091.
I also tried to to modify the flash_all.bat with persist like i have seen in an other tutorial. Then flash it witch the mi flash tool.
This also didnt work.
Then i installed twrp 3.02 zcx to get root, to delete the data/misc/wifi folder and the persist folder. This didnt work out too.
I read a lot of posts in the redmi note 3 forum, but there are a lot of dead links to the official forum.
Writing this topic this forum shows me similar threads from other phones. I will look into that now.
But maybe someone of u had the same problem, or can give me some tips to progress?
Thanks in advance and sorry for my english
Splashganger said:
Hey guys,
i need your help. Since a few days i cant activate the wlan toggle on my phone. I didnt do anything, just deactivated wlan, and couldnt activate it again. After searching for solutions, i found out that its a relatively common problem, and that my bluetooth also does not work.
If i understood it correctly, i need to flash the persist.img from a fastboot rom to the persist partition. The problem is i cant do that, since my phone is still locked. When trying to unlock it, i get the error code 20091.
I also tried to to modify the flash_all.bat with persist like i have seen in an other tutorial. Then flash it witch the mi flash tool.
This also didnt work.
Then i installed twrp 3.02 zcx to get root, to delete the data/misc/wifi folder and the persist folder. This didnt work out too.
I read a lot of posts in the redmi note 3 forum, but there are a lot of dead links to the official forum.
Writing this topic this forum shows me similar threads from other phones. I will look into that now.
But maybe someone of u had the same problem, or can give me some tips to progress?
Thanks in advance and sorry for my english
Click to expand...
Click to collapse
Wifi and Bluetooth dead is common issue for miui users on kenzo.
Its permanant damage. U cant re activate it using hacks.
It happens when u regularly updating miui rom using system updater.
Its really not safe to update miui using ota update on rn3. Its safe to use pc for new miui rom.
Kenzo users who stayed on miui rom and updated miui regularly using updater faced this. And Those who moved to custom roms long back dnt have this issue.
Thank you for you answer,
even if it wasnt what i wanted to hear. Can u tell me if its only a problem with older devices like the rn3, or will i face the same problem if i buy a newer device like rn8 for example?
Splashganger said:
Thank you for you answer,
even if it wasnt what i wanted to hear. Can u tell me if its only a problem with older devices like the rn3, or will i face the same problem if i buy a newer device like rn8 for example?
Click to expand...
Click to collapse
New devices are treble based phones. Also good optimized battery friendly.
Ya. U can buy rn8. But buy only snapdragon processor phone. mediatek is crap. Doesnt have custom roms.
Rn8 is SD.
Rn8 pro is mediatek.