hi
I have an urgent need to rom note 2 i7100 fake chines
model:i7100
fcc id:a3lgti7100
bb chip:mt6515
ms board:gt n7100
kernel ver:3.0.13([email protected])(gcc version 4.4.3(gcc))
android ver .4.1.2
sw ver . s005-ssd-hh-l002
custam build verno.0088130115
phone model:GT-N7100
Brand:samsung
cpu hardware:smdk4412
cpu model:armv7proces rev 2 (v71
cpu frequency:200.0~1400.0 MHz
screen resolation:1280.720
Gpu vendor: imaginatio technologies
gpu renderer: power vr sgx 531
gpu versionopen gl: open gl es-cm 1.1
need room plz
Related
Phone Model: DROIDZ Force
Brand: sprd
CPU hardware: SP6820a
CPU Model: ARMv7 Processor
CPU frequency: 400.0 ~ 1000.0 Mhz
Screen Resolution: 320 x 480
GPU vendor: ARM
GPU renderer: Mali-300
GPU version(OpenGL): OpenGL ES 2.0
Memory Size (Total): 160.0 MB
RAM Size(Total): 205.3 MB
Android version: 2.3.5
Build Number: DRZ_Force-2.3.6_012013
Kernel: Linux Version 2.6.35.7([email protected])
(gcc version 4.4.3(GCC)) #5
Here's my system info. I could not access my adroid system using adb ?
Is there any alternative method to root this? Please help !! http://forum.xda-developers.com/images/smilies/crying.gif
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Yes I'm searching for the same thing... A junior of my asked me to help him... all I got was this... maybe this works.. try at your risk..http://forum.xda-developers.com/showthread.php?t=2004264 ...this thread shows how to root and install CWM recovery... Give me thanks if i helped
how it possible? have u facebook or whatsapp?
rokrifat said:
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Click to expand...
Click to collapse
here is the detail hardware info:
CPU:
Genuine Inter(R) CPU 4000 2.13 GHz
Cores 2
Architecture x86
CPUID 6.4a.8
Codename Silvermont
Process 22nm
Clock Speed 533MHz - 2.13 GHz
GPU Vender Imagination Technlogies
GPU Renderer PowerVR Rouge Hood
Android version 4.4.4
Kernel architecture x86_64
OpenGL ES Version 3.0
Kernel Version 3.10.20-263204-ga9ff696(eng.YTD802A128615.20140917.060146)
Screen Density 320 dpi
Total Ram 945MB
can anyone help to validate this is the official product, not the cheap copy, thank you!
Afternoon all,
I have a Cubot X17 (MT6735) Device, now I'm seeing a lack of ROMs for this phone or information on regarding porting.
One thing I have noted with some of the guides I have found, is they require the MT device to have the same chip and GPU, I have managed to acquire the following information of my phone as speaking to the manufacture when they are releasing Marsh Mallow is like talking to a brick wall.
My CPU
Code:
SoC Model: MediaTek MT6735
Core Architecture: 4x ARM Cortex-A53 @ 1300 MHz
Manufacturing Process: 28 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p3
CPU Cores: 4
CPU Clock Range: 299 - 1300 MHz
Core 1 Clock: 1300 MHz
Core 2 Clock: 1300 MHz
Core 3 Clock: 1300 MHz
Core 4 Clock: (sleeping)
CPU Utilization: 17 %
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
My GPU
Code:
<< OpenCL Device - Mali-T720 >>
Device Name: Mali-T720
Device Type: GPU
Device Vendor: ARM
Device Vendor ID: 0x07201000
Device Version: OpenCL 1.1
Device Profile: Full
Driver Version: 1.1
OpenCL C Version: OpenCL C 1.1
Clock Rate: 5 MHz
Compute Units: 2
Anyone shed some light as to if I can port or not. and if not alternative methods?
Try to read around XDA (search)... Found a thread explaining porting of MTK roms..
Found anything yet?
hey mate. I have a Smart Grand sp which is exactly like yours, only the brand name and the model name are different. have you found anything yet? does the ROM need to get ported? can we just flash a ROM from some phone which has exactly the same hardware? (i.e: your phones ROM on my phone?)
Sorry for the amateurish and stupid question if it is, cuz I don't have enough info in this regard.
hope to hear your answer and thank you in advance
Hi friends! Tablem im buy from AliExpress, difference i have android 7, in Ali now upgraded to 9 android. Howto install android 5.1 latest twrp with root??(scatter Hardware=Hex i have) i find old post on forum, but no one of posts help me, please step by step what i need to do, thank a lot. My tablet info:
Android 7.0
Bootloader unknown
Build id BK109_20171030
Java vm ART 2.1.0
OpenGL ES 2.0
Kernel Architekture armv7l
Kernel Version 3.18.35+
Root Access No
Mediatek MT8752, by online check its (MT6580)
Cores 8
Architekture 8x ARM Cortex-A7 @ 2.00 Ghz
Revision r0p3
Gpu vendor ARM
GPU Renderer Mali - 400MP
Scaling governor interactive
Model BK109
Manufactures BMXC
screen size 10.1 inches
Resolution 800x1280
density 209dpi
hardware mt8752
total ram 3756MB (4GB)
Inernal storage 58,76GB
Click to expand...
Click to collapse