Attention, Do On Your Own Risk
I am not responsible if there is any damage to your device
And read this carefully
ONLY FOR LG L7 II P713
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's get started it
First, check your software, go to settings> about phone> software information
If you are already using firmware p71310e-ESA-XX
You can directly use the apk below to rooting process
download apk from here
- install apk
- open it, and select the Superuser or SuperSU(Recomended use this)
- Click Gandalf
- Reboot
You have succesfully rooted your device
For non p7130e-ESA-XX user
Follow these instruction
>First, Download all these
1. USB Driver
2. KDZ FW Updater
3. Download Firmware LG L7 with Root support from here
4. Choose THA/THAILAND V10E LGP713
5. Download apk from here
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and instali it
3. Connect the device computer, do not forget to check the USB debugging on, once there select the connection notification, select Software LG
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG
5.Browse File KDZ that you've download, then click ''Launch Software Update"
6. Find some food until the process is done,
cause It's take a long time, between 15-20 minutes, i'm not kidding
7. Install apk
8. Open it, and select the Superuser or SuperSU(Recomended use this)
9. Click/Choose Gandalf
10. Reboot your device
Finally, You have succesfully rooted your device
Special thanks
@alephzain
for this awesome application
Of course, all of these operations need the right Root User
1. Download and unpack this archive boothack+recovery
2. Install the program Gscript.apk on your phone
3. File boothack-cwm.sh put the path /storage/sdcard0/gscript /
4. APPSSBL.bin and recovery.img files put the path /storage/external_SD/
5. Run a previously installed Gscript
6. Press the softkey menu -> Add Script -> Load File -> boothack-cwm.sh -> save (it is added to the list)
7. Click on the saved script boothack-cwm
8. You're done! (the phone will restart in recovery mode)
Known issues at the moment:
1. The problem with the display. Displayed upside down and while navigating jumps in width. At this point in the stage of searching for a solution. Nevertheless, all necessary functions are performed
Solution for bootloop problem while using CWM
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
credit goes to
thanks @yayakuya for the solution
Reserved
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
thank ,i was rooted for my p713 .
but i can't install recovery .
karkand said:
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
Click to expand...
Click to collapse
nope, 10d didn't working with all framaroot version, you must change you fw
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
open this thread to install cwm
http://forum.xda-developers.com/showthread.php?t=2277972&page=2
follow the instructions
please note this
the recovery doesn't stable yet, don't blame anyone if there's something wrong later
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
Thx. Now my phone root
Sent from my LG-P713 using xda app-developers app
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
yayakuya said:
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
Click to expand...
Click to collapse
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
nasheich said:
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
Click to expand...
Click to collapse
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
yayakuya said:
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
Click to expand...
Click to collapse
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
nasheich said:
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
Click to expand...
Click to collapse
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
Click to expand...
Click to collapse
you're welcome
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
Click to expand...
Click to collapse
make sure you have install the driver first
use driver from the op
nasheich said:
you're welcome
Click to expand...
Click to collapse
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
yayakuya said:
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
Click to expand...
Click to collapse
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
nasheich said:
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
Click to expand...
Click to collapse
like I was mentioned above, I did try those three mode "emergency n cs_emergency mode" but still phone not found...
but nevermind, I've got new solution for it by my self....
if you guys having problem after installing cwm n do normal reboot, it will never bring you to the home screen... it's just bootloop...
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
I'm not using LG L7 anymore, i was changing about 2 months ago
btw, I'll put it at first page if you don't mind
Related
i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10
Hi,
First of all, i have no credit for almost things i'm gonna say here, thanks must go to who realy worked in the mentioned things.
I created this thread because of the large numbers of people in [Q&A, Help & Troubleshooting] and realized that the most of these problems could be solved with a simple guide. I repplied this in a thread but now i'm creating in general with hope that people sees this before asking again.
This guide can be used in these cases:
- Phone is not recognized by KDZ offline flashing
- Phone enters in SECURITY ERROR screen and doesn't boots up
- Fail trying to flash a new ROM and the phone doesn't starts
- You tried to install custom ROM via CWM and your phone have a LOCKED bootloader
- You tried to install a custom recovery via fastboot/adb and your phone have a LOCKED bootloader
- Anyway, if you think your phone is dead, give a try here
When you try to install a custom recovery with your bootloader locked (for example), the phone system detects it and give you a message of an error in security. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
1.1 - If you're having some badtimes installing fastboot drivers, follow THIS, it will probably solve the most of the problems - thanks @kuma82 for catching it
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS CWM FOR LOCKED BOOTLOADER ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
People who deserve thanks:
@sguerrini97
@cmahendra
@Dragusdrake
@captaincrook
@artas182x
@Lelus
thanks for getting this together im sure it will help some people in need.
Not to hate or anything, but you should go into more details. I had a hard time at first because my computer wouldn't give me a chance to install the drivers (it kept disconnecting and connecting). Not every computer is the same, some people have to disable driver enforcement at boot to install omap4430 drivers. Just saying, but thanks for helping :thumbup:
Sent from my LGMS769 using xda app-developers app
kuma82 said:
Not to hate or anything, but you should go into more details. I had a hard time at first because my computer wouldn't give me a chance to install the drivers (it kept disconnecting and connecting). Not every computer is the same, some people have to disable driver enforcement at boot to install omap4430 drivers. Just saying, but thanks for helping :thumbup:
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
saw your post regarding this in one of the threads but lsot it.... mind sharing that?...i am getting unkown device in device manager whrn i try to install usb driver for omap
N3Ti said:
saw your post regarding this in one of the threads but lsot it.... mind sharing that?...i am getting unkown device in device manager whrn i try to install usb driver for omap
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55 @Shutcrut you are welcome to use this info in your OP.
I wish some moderator will sticky this stuff.
Sent from my LGMS769 using xda app-developers app
kuma82 said:
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55 @Shutcrut you are welcome to use this info in your OP.
I wish some moderator will sticky this stuff.
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
Thanks kuma, i already put it into the thread.
Sorry i didn't go into details, i just took the information i gave to someone in asks threads and put it in here.
If you guys have problems in some point feel free to post here or send me a pm, i prefer post here your problems so other people can help us too
This guide will be helpful to many I'm sure. I think you should combine in wonky touch screen fix with v6 and cwm ts fix I've softbricked this phone so many times I'm back up and running in 15-20 mins but my bootloader is still locked
Sent from my LG-P769 using xda app-developers app
omgbossis21 said:
This guide will be helpful to many I'm sure. I think you should combine in wonky touch screen fix with v6 and cwm ts fix I've softbricked this phone so many times I'm back up and running in 15-20 mins but my bootloader is still locked
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
I will add more info about P769, i forgot because i don't have this model
Probably tomorrow i'll do this. I've soft bricked my phone a hundred times trying to unlock BL but no success.
@omgbossis21 if you need someone to test anything, i'm your man. I want to help with the ublocking process but i dont have much knowledge in these deep things
Thanks, but this method does not work for my p769.
Background info on device in question:
I tried rooting my LGP-769 (originally 20f) using a bin and KDZ for 20d. Halfway through, the software (on the PC) crashed, and now my phone is stuck at "S/W Upgrade" screen. It no longer appears in device manager, and the LG software used for flashing does not see it as connected, so I can't flash anything back that way. Things that I've tried:
Hard boot: no change, still stuck at S/W upgrade
Leave battery out for 15 min: no change
Can't flash because device no longer exists in Dev Manager
Do I have any options here? What went wrong?
Thanks in advance. I've only been a smartphone owner for a week and I'm worried that I've already ruined my device.
Click to expand...
Click to collapse
I can fastboot, but after doing so and attempting to flash the KDZ I get an error that the phone is not connected:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Even though the OMAP device (fastboot) is visible in device manager:
Is there any way to rescue the device? I keep reading that p769 is almost always recoverable from soft-brick but I seem to be completely stuck. Thanks in advance.
quickfastgoninja said:
Thanks, but this method does not work for my p769.
Background info on device in question:
I can fastboot, but after doing so and attempting to flash the KDZ I get an error that the phone is not connected:
View attachment 2211271
Even though the OMAP device (fastboot) is visible in device manager: View attachment 2211272
Is there any way to rescue the device? I keep reading that p769 is almost always recoverable from soft-brick but I seem to be completely stuck. Thanks in advance.
Click to expand...
Click to collapse
Using the lelus fastboot script flash the 769 ics x and u. Problem solved everytime
Sent from my LG-P769 using xda app-developers app
Hi. I'm able to install the drivers, and when using option 7 for jelly bean, the app gets stuck at <waiting for device> and the phone's screen shows a grey lg logo and the word fastboot in the corner, and there are strange vertical stripes at the bottom of the screen that don;t seem to go away anymore. I would appreciate any help
Hi. I'm able to install the drivers, and when using option 7 for jelly bean, the app gets stuck at <waiting for device> and the phone's screen shows a grey lg logo and the word fastboot in the corner, and there are strange vertical stripes at the bottom of the screen that don;t seem to go away anymore. I would appreciate any help
Click to expand...
Click to collapse
The strange vertical lines will go away after awhile. Did you look at my my second post in this thread. You should check them out. Another thing, you need to use x & u for ice, if your are trying to use the offline flash method.
CM 10.1 P769
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
quickfastgoninja said:
Thanks, but this method does not work for my p769.
Background info on device in question:
I can fastboot, but after doing so and attempting to flash the KDZ I get an error that the phone is not connected:
View attachment 2211271
Even though the OMAP device (fastboot) is visible in device manager: View attachment 2211272
Is there any way to rescue the device? I keep reading that p769 is almost always recoverable from soft-brick but I seem to be completely stuck. Thanks in advance.
Click to expand...
Click to collapse
You did not state if you flashed ice cream x&u, you have it installed properly.
Another thing, how did your phone get into this state? What did you?
CM 10.1 P769
cubemike99 said:
Hi. I'm able to install the drivers, and when using option 7 for jelly bean, the app gets stuck at <waiting for device> and the phone's screen shows a grey lg logo and the word fastboot in the corner, and there are strange vertical stripes at the bottom of the screen that don;t seem to go away anymore. I would appreciate any help
Click to expand...
Click to collapse
What model is yours? Mine is a P768 and its only recognized by KDZ offline method if i choose P768 ICS x loader and uboot
But seems like the drivers are not installed in windows, are you using Windows 7 ? If yes, try reinstall the fastboot drivers following the thread i link in first post, pluging the phone in another USB port of your PC. kuma82 wrote a very good thing about installing the drivers, they are also linked in first post, take a look there and tell us if problem persists
I get to the fastboot on my l9 tmobile but it just keeps telling me to select phone model over and over again. it never gets me in fastboot on the computer.
i flashed a wrong rom and it just keeps telling me security error. it wont boot at all. i dont know what to do. Phone boots up into fastboot but doesnt show up on computer as fastboot. ive been trying to fix this for 2 weeks now.
Edit: i can get into sw upgrade on my phon but it shuts off in a while it never stays on.
fastboot is to only allow the PC to format a partition after that you can go to sw mode make sure with the fast boot program you choose ICS u-boot xloader. after that completes flash using sw mode
I'd try a new PC if had to. I know on mine I had to use another PC. Ideally windows 7
Sent from my LG-P769 using xda app-developers app
suicidalerik said:
I get to the fastboot on my l9 tmobile but it just keeps telling me to select phone model over and over again. it never gets me in fastboot on the computer.
i flashed a wrong rom and it just keeps telling me security error. it wont boot at all. i dont know what to do. Phone boots up into fastboot but doesnt show up on computer as fastboot. ive been trying to fix this for 2 weeks now.
Edit: i can get into sw upgrade on my phon but it shuts off in a while it never stays on.
Click to expand...
Click to collapse
You dont need to enter in fastboot. Run lelus fastboot script, select ics xloader and uboot for your phone model. It will say to you remove the battery and press enter, remove it and press enter. Then insert usb cable (im assuming you have fastboot drivers installed) and after about 2 seconds re insert the battery.
Now your sw update mode should stay on until your kdz update finish
And dont forget to run lelus script as administrator
have followed all the steps stated but am having trouble getting into s/w upgrade mode.. in the last 5 hours ive managed to go into it twice by sheer dumb luck. am now very frustrated. another question- do i have to use the lelus script everytime i try to go into upgrade mode?
suicidalerik said:
I get to the fastboot on my l9 tmobile but it just keeps telling me to select phone model over and over again. it never gets me in fastboot on the computer.
i flashed a wrong rom and it just keeps telling me security error. it wont boot at all. i dont know what to do. Phone boots up into fastboot but doesnt show up on computer as fastboot. ive been trying to fix this for 2 weeks now.
Edit: i can get into sw upgrade on my phon but it shuts off in a while it never stays on.
Click to expand...
Click to collapse
Try holding vol up and power with battery out. Hold it even after the s/w appears.
Sent from my LG-P769 using XDA Premium 4 mobile app
diod66 said:
have followed all the steps stated but am having trouble getting into s/w upgrade mode.. in the last 5 hours ive managed to go into it twice by sheer dumb luck. am now very frustrated. another question- do i have to use the lelus script everytime i try to go into upgrade mode?
Click to expand...
Click to collapse
Try installing ICS xloader and uboot with lelus script instead of JB ones and try again
will0899 said:
Try holding vol up and power with battery out. Hold it even after the s/w appears.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I Recommend the same for you, try installing ICS xloader and uboot with lelus script and try again
Hello I are trying unbrick my LG L7X but i cant!
when i tried to flash the device, an error appears
[see the image below]
http: //i.imgur.com/AwtLxma.jpg
and the device dont make anything.. the emergency mode screen is still without restart or other thing..
I already download the all firmwares of Mexico (TELCEL) displayed here http ://lg-phone-firmware.com/index.php?id_mod=21 and is not working too, =(
My phone information is:
Model: LGP714
Country: Mexico
Phone Company: TELCEL
______________________________
also when i install a kdz called "V20A_01.kdz" any error appears in the KDZ Updater Tool, the phone restarts after the flash is full but dont working.
The phone is stocked in the LG Logo and dont make anything, i only can enter to the emergency mode again using:vol+ + connecting the USB after.
I really need help, i already go to the "technologhy center" in my country and any body haves a idea of what happens with my phone Lol.
sorry for my bad english,
Anybody can help?
HELP ME =(
my phone its bricked... today
Anyone can help me? please
flomix77 said:
Anyone can help me? please
Click to expand...
Click to collapse
What procedure you use to flash KDZ? Have you try emergency mode in updater? Have you CWM installed on device?
And yes, it is worst scenario when you try to flash rom for other device...
maxx_hr said:
What procedure you use to flash KDZ? Have you try emergency mode in updater? Have you CWM installed on device?
And yes, it is worst scenario when you try to flash rom for other device...
Click to expand...
Click to collapse
I are following these steps:
(when i turn on my phone only the LG logo appears)
1.- Turn Off my Phone
2.- Configure the KDZ Updater settings, Type 3GQCT and mode CS_EMERGENCY (I already tried the all modes)
3.- remove the batery
4.- Connect the USB and press vol+
5.- Now are in emergency mode (windows has detected the device because i already have the LG drivers and PC Suite)
6.- Click on "Launch Software Update"
7.- Wait while the firmware is installing..
i already use a application to found my original (official) firmware from LG page (V10A_09.kdz TCL/TELCEL MEXICO)
But when i tried install this kdz an error appears in the Updater KDZ (in the 14% of progress) and the phone its bricked on emergency mode..
I already tried a lot of differents KDZ Files, V20A_00, V120H_00, and nothing...
How i can do?
flomix77 said:
I are following these steps:
(when i turn on my phone only the LG logo appears)
1.- Turn Off my Phone
2.- Configure the KDZ Updater settings, Type 3GQCT and mode CS_EMERGENCY (I already tried the all modes)
3.- remove the batery
4.- Connect the USB and press vol+
5.- Now are in emergency mode (windows has detected the device because i already have the LG drivers and PC Suite)
6.- Click on "Launch Software Update"
7.- Wait while the firmware is installing..
i already use a application to found my original (official) firmware from LG page (V10A_09.kdz TCL/TELCEL MEXICO)
But when i tried install this kdz an error appears in the Updater KDZ (in the 14% of progress) and the phone its bricked on emergency mode..
I already tried a lot of differents KDZ Files, V20A_00, V120H_00, and nothing...
How i can do?
Click to expand...
Click to collapse
Try this:
1. Download older version of kdz updater: https://www.dropbox.com/s/w8h5t1mqcuclijv/KDZ_FW_UPD_EN.rar
2. unpack it on root of c:
3. Pull out LAN cable, or disable internet connection
4. Run msxml.msi from unpacked kdz_fw_upd_en folder
5.put the KDZ you download previously and be carefull to choose only KDZ FOR YOUR DEVICE on root of C:
6. Turn off the phone, hold the volume "down" and insert the USB cable, should see a yellow background and the words "Emergency mode"
7. Run KDZ_FW_UPD.exe
8. choose parameters 3GQCT and DIAG, select the firmware file (KDZ)
9. Click Launch software update and wait...
10. If update stuck again on some %, (stuck means no progres for long time, like 10-15 min), unplug USB, pull out battery, reinsert and repeat from step 6. If you are lucky, mabe previous flash turns back partition organisation destroyed by flashing firmware for other phones, and second flash finish succesfull. In that case, do factory reset,,
11. good luck
11.
The error appears again
maxx_hr said:
Try this:
1. Download older version of kdz updater:
2. unpack it on root of c:
3. Pull out LAN cable, or disable internet connection
4. Run msxml.msi from unpacked kdz_fw_upd_en folder
5.put the KDZ you download previously and be carefull to choose only KDZ FOR YOUR DEVICE on root of C:
6. Turn off the phone, hold the volume "down" and insert the USB cable, should see a yellow background and the words "Emergency mode"
7. Run KDZ_FW_UPD.exe
8. choose parameters 3GQCT and DIAG, select the firmware file (KDZ)
9. Click Launch software update and wait...
10. If update stuck again on some %, (stuck means no progres for long time, like 10-15 min), unplug USB, pull out battery, reinsert and repeat from step 6. If you are lucky, mabe previous flash turns back partition organisation destroyed by flashing firmware for other phones, and second flash finish succesfull. In that case, do factory reset,,
11. good luck
11.
Click to expand...
Click to collapse
bit.*ｌy/1qp04s5
bit.*ｌy/1lqlfT1
bit.*ｌy/1iKwMC4
(remove * because i cant post links for the images)
The problem persists how i can do?
I can install the firmware V20A_00.kdz but the phone its bricked on the LG logo, and dont work. if i try install other firmwar (V10A_09.kdz) the kdz updater shows a error, T_T
flomix77 said:
bit.*ｌy/1qp04s5
bit.*ｌy/1lqlfT1
bit.*ｌy/1iKwMC4
(remove * because i cant post links for the images)
The problem persists how i can do?
I can install the firmware V20A_00.kdz but the phone its bricked on the LG logo, and dont work. if i try install other firmwar (V10A_09.kdz) the kdz updater shows a error, T_T
Click to expand...
Click to collapse
DONT TRY TO INSTALL OTHER PHONE FIRMWARE (V20A_00.kdz)! Flash only kdz for your model, like V10a_08.kdz, and download it from http://lg-phone-firmware.com/index.php?id_mod=21, in Mexico section.
No known similar firmware is available for your phone!
maxx_hr said:
DONT TRY TO INSTALL OTHER PHONE FIRMWARE (V20A_00.kdz)! Flash only kdz for your model, like V10a_08.kdz, and download it from http://lg-phone-firmware.com/index.php?id_mod=21, in Mexico section.
No known similar firmware is available for your phone!
Click to expand...
Click to collapse
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
flomix77 said:
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
Click to expand...
Click to collapse
Have you try to install V10A_08.kdz? This is older version of WORKING firmware for your device, just try...
There's no v20 ROM for L7 II until right now while I'm writing this message (and it's just a name that indicates the version for that specific model - e.g. v10 is ICS and v20 is JB in P700, while v10 is JB in P710 - so don't try to compare them in any way).
You simply flashed the wrong firmware, you flashed the firmware of another LG model in your phone, probably a L7 I ROM via KDZ.
The bad news is until today I found no way to fix the phone, see my topic: http://forum.xda-developers.com/showthread.php?t=2743453
OK
On this link (maby) you can find another way to flash KDZ: http://forum.xda-developers.com/showthread.php?p=51612244
Yes, you must change some things to work, but this is the last chance for your device.
And I remember that i was read one similar post before few months, for L7 II, but i can't find it anymore. In that post someone describe how to resolve his bricked phone problem, with link to post where he was find solution how to succesfully flash firmware... this post you cant find in LG L3 II - 5 - 7 II section.
So, just keep trying, and please, share with us what you do. If you dont understand procedure, just ask, and maby I have (or someone else) answer.
Good luck
Hi thanks for the suggestion...
It looks like the phone isn't able to enter Download Mode (required for FlashTool?), because it always turn on in emergency... Or am I doing something wrong? I'm not sure about the key combination for L7 II, I can't find it anywhere...
rafaelluik said:
Hi thanks for the suggestion...
It looks like the phone isn't able to enter Download Mode (required for FlashTool?), because it always turn on in emergency... Or am I doing something wrong? I'm not sure about the key combination for L7 II, I can't find it anywhere...
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=54044924&postcount=2
maxx_hr said:
Try this: http://forum.xda-developers.com/showpost.php?p=54044924&postcount=2
Click to expand...
Click to collapse
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
rafaelluik said:
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
Click to expand...
Click to collapse
I think emergency mode is download mode...
rafaelluik said:
It doesn't work. It goes straight to emergency mode. And those instructions are in a L3 II topic, what if the combination for L7 II is different (involves the hotkey IDK)?
Click to expand...
Click to collapse
maxx_hr said:
I think emergency mode is download mode...
Click to expand...
Click to collapse
flomix77 said:
My original phone firmware is V10A_09.kdz and the kdz updater shows a error if i try install it T.T
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54504577&postcount=10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i want to get in emergency/download mode, on the screen appears this blue stripes.
IGGYVIP i try your guide, but when i want flash KDZ, it is the same result as all. (IP PARAM: 0 etc.)
It is possible, that my phone will ok?
Please help
Hi
I am facing same problem described here.
I flashed wrong rom on my LG P715 and now it is bricked. Before flashing I rooted the device and installed CWM recovery. I am having same blue screen now.
Please help me.
Thank you in advance.
Harish
harishc said:
Hi
I am facing same problem described here.
I flashed wrong rom on my LG P715 and now it is bricked. Before flashing I rooted the device and installed CWM recovery. I am having same blue screen now.
Please help me.
Thank you in advance.
Harish
Click to expand...
Click to collapse
From here do this:
http://forum.xda-developers.com/opt...torial-how-to-achieve-root-p710-l7-2-t2921271
REMOVE ALL DRIVERS OF ANDROID YOU HAVE (Lg Adb all). Reinstall the drivers I provided there and adb. After that just plug usb in and turn phone on. Tell me as what is getting recognized (in device manager).
First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
.
Lets See It May or May Not Work
Martin213 said:
Nice tut thank you,can this build run on D405n?
Click to expand...
Click to collapse
Well I have Never Tested This On ANy Another Device Except For LG L90 D410
If you want to try this on your Lg L90 D405n i recommend to get a kdz file for your model as a backup
To download KZD for you Device GOTO lg-firmware-rom.com
Enter IMEI no of your device.
TO GET THE IMEI OF YOUR PHONE go to About Phone in settings and get your imei no or else remove the battery and see there it will be written.
Do Post If This Worked On Your Device
Best Of Luck With The Trial :good: :good:
my phone is lg l90 d410(v10d-IND-xx),can i flash using kdz flasher??
will there be any kind of problems???
Will a message box pops up when restart the phone: "this version is not for users"
Other languages
in the window "select country and language" is only available English? happens to have Portuguese?
Perfect
is working perfectly on my L90 d410nh......Thanks
Ya there might be a mag in some of the devices but that is due to network nothing is related to the rom and there will not be anybkind of problem due to it.
Sent from my LG-D410 using XDA Free mobile app
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Other languages
OsFreakxx said:
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Click to expand...
Click to collapse
Worked in portuguese!
Would this kdz work in 405n variant? Or at least with phew bugs?
I dont think that you should try this its a totally different varient as it has different hardware configuration
Sent from my LG-D410 using XDA Free mobile app
OsFreakxx said:
First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
Click to expand...
Click to collapse
Im Try to flash but 47% done then software hang n stop
error at startup after phone finished booting up
Hi,
My LG L90 D410 phone started giving the below error at startup after I upgraded to Lollipop 5.0.2. Though everything works fine. please advice.
Thank you
Software Update...
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
dedoyin said:
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
Click to expand...
Click to collapse
Are u still facing the issue sorry for late reply i was busy with work
I don't think so those are two completely different variants
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Power off the phone .
Press vol down and power button and it will boot into boot loader
Connect the USB cable .
Go to ed300's post and download the twrp recovery for lollipop and KitKat.
If the base ROM on which u have flashed the new ROM was KitKat use the KitKat twrp.
Else use the lollipop twrp.
Extract the required zip file.
After connecting the USB , click on the file named Flash . after its completed click on Boot file .after that's also done again click the Flash file .
After that it will show (waiting for device )
And the phone will boot to the recovery mode and u can flash the ED300's ROM I prefer CM12.1
Good luck.
bro Iam getting waiting for device now itself but Iam not able to move any furthur after that . It is just showing "waiting for device "
bvsbrk said:
bro Iam getting waiting for device now itself but Iam not able to move any furthur after that . It is just showing "waiting for device "
Click to expand...
Click to collapse
Did u follow as I mentioned?
Which was the base rom on which u flashed CM
Its lollipop and I followed steps exactly as you mentioned . I replaced the recovery of adb and fastboot folder with the recovery you suggested . But the thing is fastboot driver which was gone after flashing cm.
bvsbrk said:
Its lollipop and I followed steps exactly as you mentioned . I replaced the recovery of adb and fastboot folder with the recovery you suggested . But the thing is fastboot driver which was gone after flashing cm.
Click to expand...
Click to collapse
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
aravindmj said:
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
Click to expand...
Click to collapse
The link is downloading a file which is invalid. I cant open the zip file that you asked to download from the zip file . Pls send some other link
bvsbrk said:
The link is downloading a file which is invalid. I cant open the zip file that you asked to download from the zip file . Pls send some other link
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
aravindmj said:
https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
Click to expand...
Click to collapse
that is not working every command window stopped at "waiting for device" anyway thanks a lot
bvsbrk said:
that is not working every command window stopped at "waiting for device" anyway thanks a lot
Click to expand...
Click to collapse
Try this https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
aravindmj said:
Try this https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
Click to expand...
Click to collapse
This I had tried already as you posted it before. Some one said my device data is completely lost while I flashed cm.
bvsbrk said:
This I had tried already as you posted it before. Some one said my device data is completely lost while I flashed cm.
Click to expand...
Click to collapse
Sorry the link was wrong try this it's a different one https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk
App data excluding what's app will be lost but the data in the internal storage will.be present.
aravindmj said:
Sorry the link was wrong try this it's a different one https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk
App data excluding what's app will be lost but the data in the internal storage will.be present.
Click to expand...
Click to collapse
Same thing bro the problem is something related to fastboot drivers which were gone from my phone
It worked for me . Can you send me a link where i can find CM12.1
Mahesh0001 said:
It worked for me . Can you send me a link where i can find CM12.1
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...t-cm12-1-rom-lenovo-a6000-plus-withe-t3288805
My phone went into bootloop , i was using ResurrectionRemix 5.8.3 , i cant go into recovery mode. but can start bootloader.
I have installed Minimal fastboot , its showing no devices found when used "adb devices"
But shows the devices for command "fastboot devices"
I also tried flashing twrp.img using "fastboot flash recovery twrp.img"
But still phone not starting just stuck on looping the startup..Please helpppp
i get error when i hit flash.bat that device not found but it write the img file
What should i do?
My Lenovo A6000 Kitkat 4.4 struck on logo after phone switched off after hang. Phone when switched lenovo logo comes with display down saying press power button long for fastboot but does not enter fastboot. Whenever i press power button it says the same press power button long for fastboot but does not enter fastboot. nothing works I guess the OS crashed tried to enter into boot menu using volume +- powerbutton nothing works tried different combination nothing works.
i have downloaded kitkat 4.4 stock ROM but dont know how to flash and install using pc. If anyone knows how then let me know.
johnwell4u said:
My Lenovo A6000 Kitkat 4.4 struck on logo after phone switched off after hang. Phone when switched lenovo logo comes with display down saying press power button long for fastboot but does not enter fastboot. Whenever i press power button it says the same press power button long for fastboot but does not enter fastboot. nothing works I guess the OS crashed tried to enter into boot menu using volume +- powerbutton nothing works tried different combination nothing works.
i have downloaded kitkat 4.4 stock ROM but dont know how to flash and install using pc. If anyone knows how then let me know.
Click to expand...
Click to collapse
Flashing via phone is easy.
Just go to recovery wipe entire thing and then flash.
Mahesh0001 said:
i get error when i hit flash.bat that device not found but it write the img file
What should i do?
Click to expand...
Click to collapse
Make sure to use the recovery based on the rom that you where on before this thing happened.
And try executing the boot.bat file also. Do it simultaneously
aravindmj said:
Replaced? I didn't get that.
Just download this https://userscloud.com/a25aszfwkn2z
Put the phone to fastboot by pressing vol down and power .
Connect the USB to phone . Unzip the file mentioned above. Open the file.
Double click on flash.bat then after that's done , boot.dat after that's also done then flash.bat and ur phone will boot to recovery.
Click to expand...
Click to collapse
worked for me to open recovery again.. i am now trying to reflash MIUI8 android 5.1.1.:good::good::good: