Mod for defender holster - Galaxy Note 3 Accessories

I have a real physical job(cable guy) and theres plenty of times where I fumble my phone from the holster or need to take a quick pic or need quick access to the S pen,I felt like modding my defender holster with my dremil for easy access for the camera lense,S pen,and using it as a kick stand..( lol.I need to replace my bit)
Sent from my SCH-I535 using xda app-developers app

Dude- Good idea- But not quite clean..Looks like you butchered the holster.
maybe next time take your time and more careful when cutting.

E4gt007 said:
Dude- Good idea- But not quite clean..Looks like you butchered the holster.
maybe next time take your time and more careful when cutting.
Click to expand...
Click to collapse
Yea my bit is dull, as you cut into plastic theres a small portion that bubbled up, so I switched to the sander bit to smoothen it out but when you sand plastic it changes from the original color..no biggie for me just a holster thays gonna be under my shirt or tool belt.
Sent from my SM-N900V using xda app-developers app

Do you guys recommend removing the built in screen protector?
Sent from my SM-N900T using XDA Premium 4 mobile app

tongueman87 said:
Do you guys recommend removing the built in screen protector?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have always done this since my first Defender on the iphone4. It just pops right out.
As for the mod in the OP it's a good idea but yes I'd recommend cutting only the area where the camera and pen are. You can practice with an 1/8" drill bit on a Dremel at mid speed. Go slow and don't use too fast a spindle speed or the plastic will melt. Even if it does ball up a bit it's easy to remove. Once you drill the initial hole closer to the middle of your target area you can cut your way to the outlined area with ease. When a more specialized cutting device isn't available, this works great. This is the principle that the Rotozip uses.

Related

Anyone have an Otterbox Defender?

And did you remove the plastic covering the screen? I have ghost armor already ...was wondering of anyone has done this?
Sent from my SAMSUNG-SGH-I747 using xda premium
freemeech said:
And did you remove the plastic covering the screen? I have ghost armor already ...was wondering of anyone has done this?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I have one...
I did not remove the screen protector. Instead I removed my ZAGG IS. I like the built in one. However removing the plastic one is not hard at all. Its just glued in place.
Wasn't worried about the ease of removing so much as the feel...its kinda springy if u know what I mean ...its starting to annoy me some lol
Sent from my SAMSUNG-SGH-I747 using xda premium
I bought mine on Saturday but I am taking it back because of the built-in screen protector.
Not only does it not sit flush with the glass (which is why it's "springy") but it distorts the quality of the screen horribly.
Getting my money back and sticking with my Diztronic TPU
Wow I removed it because it was too springy and it feels way better with my ghost armor screen protector!
Sent from my SAMSUNG-SGH-I747 using xda premium
I don't think Otterbox took into account the weirdly concaved screen. I agree with the feel of it, spongy. But i also don't like how the sides are squared off, as opposed to more rounded on the previous versions I've used on other devices. The accessory plugs are hard to open and close. If you take the silicon cover off, you notice there's no grab rail for the silicon in the corners. Its hard to lock into the holster. Feels unnatural when taking it out if the holster and I've used a defender for over a year previous.
I'm OK with all the feeling because I was using a commuter it seems much like the commuter to me...
Sent from my SAMSUNG-SGH-I747 using xda premium
On every device I have ever had a defender series I just cut away the plastic shield it sucks one I do that I toss on my own screen protector and enjoy!
Sent from my SGH-I747M using xda premium
I just got my defender today.I like it feels fine had the commuter before this one the commuter does feel more rigid but I like not having to worry on screen. The holster does look odd will have time to test that tomorrow
Keep in mind that there are two different varieties of the defender floating around for the s3 it seems.
Sent from my SAMSUNG-SGH-I747 using xda premium
avarize said:
Keep in mind that there are two different varieties of the defender floating around for the s3 it seems.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Do tell more, and please provide documentation.
I only know of one and I have it. I Have no issues with the screen protector fitting either. After a day of using it, it felt broken in!
cgardnervt said:
I only know of one and I have it. I Have no issues with the screen protector fitting either. After a day of using it, it felt broken in!
Click to expand...
Click to collapse
Did you purchase directly from Otterbox? I purchased at local att store. After4 days, no better. Thinking of calling Otterbox and complaining.
Deleted.
I bought from AT&T but now outs returnd the screen was grainy may be that's what was meant by springy... I bought back a commuter but don't want to deal with adhesive protector yet want to have a protected screen
avarize said:
Keep in mind that there are two different varieties of the defender floating around for the s3 it seems.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Mine came from AT&T ...
Sent from my SAMSUNG-SGH-I747 using xda premium

Cleaning the phone

Morning all. Ive been on vacation at the beach and sand has worked its stupid ass all into the screen bezel. Has anyone used any specifc tools to clean dist and lint built up in the phones smaller crevasses
Sent from my ADR6425LVW using xda app-developers app
I've always made due with compressed air. Cyber Clean is pretty neat if you want to get into those hard-to-reach areas.
I'm kind of compulsive about keeping stuff clean, so I usually use those methods, and I often apply hand sanitizer to the screen and back cover for good measure.
If you've got the sand in some very hard to reach area, shaking the phone gently with the compressed air aimed at it might help.
SirSigma said:
I've always made due with compressed air. Cyber Clean is pretty neat if you want to get into those hard-to-reach areas.
I'm kind of compulsive about keeping stuff clean, so I usually use those methods, and I often apply hand sanitizer to the screen and back cover for good measure.
If you've got the sand in some very hard to reach area, shaking the phone gently with the compressed air aimed at it might help.
Click to expand...
Click to collapse
Hmm never heard of hand sanatizer on the screen? But yea i dont know why i dont have compressed air because im super ocd
Sent from my ADR6425LVW using xda app-developers app
You can clean that bezel on the front of the phone with the corner of a piece of paper.
YTHero said:
You can clean that bezel on the front of the phone with the corner of a piece of paper.
Click to expand...
Click to collapse
Actually thats genius
Sent from my ADR6425LVW using xda app-developers app
q-tips and canned air.
I use the corner of a sticky note. The adhesive helps grab some of the dirt.
Sent from my ADR6425LVW using xda app-developers app

What case/protector are you all using

So I'm shopping for a good case and screen protectors for this thing. Any recommendations?
Sent from my HTC6435LVW using xda app-developers app
broons said:
So I'm shopping for a good case and screen protectors for this thing. Any recommendations?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I've got the otterbox commuter, it's good protection without being to massive.
I went with the Defender case. I removed the screen from the case and installed one of the Xtreme guard screens on the phone and am very happy with the look and feel of the phone. It may seem like a bit much, but after breaking my first phone in under 8 hrs - this was the best fit for me
cmay227 said:
I've got the otterbox commuter, it's good protection without being to massive.
Click to expand...
Click to collapse
same otterbox commuter series... I went with the Glacier colored case, im tired of black lol
Cool will probably go with the commuter and xtreme guard. Thanks all
Sent from my HTC6435LVW using xda app-developers app
How are the buttons on the commuter? I had the one for the galaxy s3 and they were impossible to press half the time. Are these any better or are they super stiff as well?
Sent from my HTC6435LVW using xda premium
I have a little s curve tpu case off eBay. Just using it till more options become avaliable.
Sent from my HTC6435LVW using xda app-developers app
Diztronic TPU. I cannot speak highly enough of this case. Cheap, sturdy, doesn't add too much weight/size and, as a bonus, it looks great.
Sent from my HTC6435LVW
I like otterbox It all comes down to opinions
chrisjm00 said:
How are the buttons on the commuter? I had the one for the galaxy s3 and they were impossible to press half the time. Are these any better or are they super stiff as well?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Volume buttons work great, power is stiff as hell. Thinking about cutting the top to have direct access to the power button.
Posted from my damn phone!
cmay227 said:
Volume buttons work great, power is stiff as hell. Thinking about cutting the top to have direct access to the power button.
Posted from my damn phone!
Click to expand...
Click to collapse
That's odd. I have a mucheasier time pressing the buttons with the case on rather than naked. I am loving my commuter. I don't exactly care for the way the screen protector is smaller than the face of the phone, but i guess that is about the only way to do it with the curved edges. I can honestly say that I hate the curved edges after trying 2 other screen protects and they will not stick.
I went with just the 3 pack of cheap screen protectors -- they do the job and you can easily replace them, and a flexible silicone case (the thin ones) because they absorb impact better than a hard case. It keeps the phone low profile and protected.
Sent from my rooted, semi-unlocked, debloated HTC DNA
I will probably stick it out with the diztronic then. I figured that it might have been improved but it doesn't sound like it. Thanks.
Actually ordered the diztronic. Otterbox looks nice but kinda salty fir my taste at least right now.
Sent from my HTC6435LVW using xda app-developers app
Stay naked!!!! screen protector if you must... but why put such a beautiful phone in a block of rubber. Just be a little carefull
FlyingCaveman said:
Stay naked!!!! screen protector if you must... but why put such a beautiful phone in a block of rubber. Just be a little carefull
Click to expand...
Click to collapse
Sometimes it doesn't matter how careful you are. Caca happens
Sent from my HTC6435LVW using xda app-developers app
I know that's right my case will be here shortly
sent from my beastly powered DNA
One thing I quickly discovered about Diztronic is that the opening around headphone port is pretty small. The chord I use in my car doesn't fit but smaller headphone and computer speaker jacks do. I will try my full-size headphones today at the office.

Qmadix Legacy Case for DNA

This case looks pretty cool. If someone has it, let me know how much bulk it adds to the phone. Looks like it adds quite a bit.
http://www.shopandroid.com/qmadix-legacy-cover/4AA13160.htm
Sent from my HTC6435LVW using xda premium
I saw this last night i was wondering about the quality of the case. I have never heard of the company
Sent from my HTC6435LVW using xda app-developers app
I like the styling of the case more than the "envelope" design on the back of the Otterbox cases. But I don't like the fact that these are only renders of the cases. Show us some actual pictures.
I just got the case, and I actually like it, I normally don't like cases but it seems to feel good on the phone. I posted a few pics of it. The one downfall is that it covers the back notification LED.
electrogiz said:
I just got the case, and I actually like it, I normally don't like cases but it seems to feel good on the phone. I posted a few pics of it. The one downfall is that it covers the back notification LED.
Click to expand...
Click to collapse
Are the buttons easier to press with the cover?
Yes they are. Super easy.
Sent from my HTC6435LVW using xda premium
Oh! Well I don't know if all cases cause this but my usb port cover just fell off, it was sorta difficult with the case.
Sent from my HTC6435LVW using xda premium
Is it easy to grip? Seems like the shiney plactic could be slippery.
Sent from my HTC6435LVW using xda app-developers app
Right on! Thanks for the pics. They're way better than online and it doesn't look as bulky. It looks well built too.
Sent from my Octo Core 1920p HTC Galaxy Droid Incredible 10X with 100Mp camera, 9000 mAh battery & 500Gb of memory.
the side rubber indents make it grip when holding it, also the middle is recessed but it helps with gripping it, I tend to drop my phone often but havent yet with this one. (had it since day one 11/21) it feels really good, very solid.
electrogiz said:
I just got the case, and I actually like it, I normally don't like cases but it seems to feel good on the phone. I posted a few pics of it. The one downfall is that it covers the back notification LED.
Click to expand...
Click to collapse
Is the inside layer real flexible at all? I've got a skinomi screen protector on and it's too thick for the diztronic case I have. Gonna need a case that can fit over the edges of the screen protector. Thanks for the pics. Beautiful case.
Sent from my HTC6435LVW using xda premium
This case looks nice wish I would have seen this before I ordered a case for my phone
sent from my beastly powered DNA using Tapatalk 2
Kasab said:
Is the inside layer real flexible at all? I've got a skinomi screen protector on and it's too thick for the diztronic case I have. Gonna need a case that can fit over the edges of the screen protector. Thanks for the pics. Beautiful case.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I have the same screen protection and case, it destroyed my skinomi
Sent from my HTC6435LVW using xda premium
Kasab said:
Is the inside layer real flexible at all? I've got a skinomi screen protector on and it's too thick for the diztronic case I have. Gonna need a case that can fit over the edges of the screen protector. Thanks for the pics. Beautiful case.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Yes, the outer rim of it is flexible. so it will do just that

Solution give your case more grip

Maybe it's just me... But I found most cases to be very slippery on the sides. One week now and no problems.... Solution 3m anti sIip tape transparent. You can see from the side shot almost impossible to see the tape. Give great grip and adds no bulk etc.... If I had the nerve I would use it on the bare phone. It sticks on all the classes I have and does not collect dust.
Sent from my SM-N900 using XDA Premium 4 mobile app
magichoward said:
Maybe it's just me... But I found most cases to be very slippery on the sides. One week now and no problems.... Solution 3m anti sIip tape transparent. You can see from the side shot almost impossible to see the tape. Give great grip and adds no bulk etc.... If I had the nerve I would use it on the bare phone. It sticks on all the classes I have and does not collect dust.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's sound good, how about this?
Still great... No signs of wear.... With I could find a thin case with grips on the sides
Sent from my SM-N900 using XDA Premium 4 mobile app
magichoward said:
Still great... No signs of wear.... With I could find a thin case with grips on the sides
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have this case and it's beautiful, thin and not slippery. Quicksand Case - Note 3
I got mine for $3 shipped and it's got a bit of bend to it so that it's durable. I highly recommend as a backup or even daily driver if you're into thin cases.
magichoward said:
Maybe it's just me... But I found most cases to be very slippery on the sides. One week now and no problems.... Solution 3m anti sIip tape transparent. You can see from the side shot almost impossible to see the tape. Give great grip and adds no bulk etc.... If I had the nerve I would use it on the bare phone. It sticks on all the classes I have and does not collect dust.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have used this method on my s3 aluminum bumpers and it worked awesome but i used black floor traction tape cut into thin pieces to go around the edges
I'm just wondering, will the 3M tape leave a sticky residue if it is taken off?

Categories

Resources