Related
Hi guys
I have just flashed Omega v8.1 to my phone and reflashed CWM touch, rebooted into recovery and now my phone won't boot. It turns on and just displays the "Samsung Galaxy S3" screen. I have tried flashing via the Galaxy s 3 toolkit but this requires USB debugging to be enabled. It looks as though it is not enabled as the toolkit does not recognise my phone.. The only thing I can do is boot it into download mode.
Any clues??
Thanks
If you can go on download mode, then flash stock firmware via odin.
Sent from my GT-I9300 using xda premium
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Also, you posted this in the wrong section
Just flash the stock rom?
Yep bricked phone isn't really a problem, unless it's hardware related.
Sent from my GT-I9300 using xda premium
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
Also, you posted this in the wrong section
Click to expand...
Click to collapse
This right method, some times data ****ed up, so must wipe cache
Sent from my GT-I9300 using Tapatalk 2
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
reflash cwm and see
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
I d say, simply get odin separately, then re-create the same settings as when the toolkit does it.
It really is very simple once you ve done it once or twice Don t panic and take the time to make sure the right boxes are checked and double-triple check then reboot in Download mode, plug it in then gogo !
Tectas said:
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
You can use odin without the toolkit for the meantime, just run it and put your phone on downlod mode
Sent from my GT-I9300 using xda premium
hisee said:
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's always disabled after ROM flash and I keep forgetting to re enable it..
brianwilkie76 said:
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
Click to expand...
Click to collapse
Ok, sry, then the toolkit reboots your device first to download mode via adb, take the already given advice to use Odin itself, just download it put the Rom tar (or tar.md5) into pda, make sure that only auto reboot and reset time is checked, reboot to download mode continue by pressing up, plugin the cable and press the start button at Odin.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Forget running the toolkit, forget USB debugging mode. You do not need it for now.
And there is no need to download or setup ODIN or anything like that.
Just go to folder/directory where you installed the toolkit (usually C:\Samsung Galaxy S3 ToolKit) and look for the file called 'Odin3_v3.07' or 'Odin3_v3.04' or whatever version you find. Then run it; tada, ODIN is running now!
Now, put your phone in download mode. To do this, hold VOL DOWN and HOME and POWER buttons together and let go when you see the 'Samsung Galaxy S III' logo come up.
Then it will load up a screen that says press VOL UP to continue (and enter download mode). Press it.
Now it should say 'Downloading do not turn off target!'
Connect your USB Cable and proceed to flash a new CWM recovery using ODIN
Then once you have flashed a new recovery, boot into it (VOL UP & HOME & POWER buttons together).
Then follow my instructions from my previous post.
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Click to expand...
Click to collapse
If you want to flash a stock ROM instead of CWM + Custom ROM then you can do that via ODIN as well.
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
themude said:
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
Click to expand...
Click to collapse
Boot into custom recovery (VOL UP & HOME & POWER buttons together)
Then:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Reboot into Android and see if that has fixed it; if not, then go back to CWM recovery and do the following:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Format /system (probably not required but just in case)
And then flash Omega ROM again
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=UxaVXJJdhhk
How to enter RECOVERY mode on the Samsung Galaxy S3
1) Make sure the phone is turned OFF (take out battery, wait 10 seconds, replace battery, make sure nothing appears on screen)
2) Press+Hold the VOL UP and HOME buttons, together
3) Now, whilst holding these two buttons together, press+hold the POWER button
4) Keep all of these buttons held down, don't let go even if you see the 'Samsung Galaxy S III' logo screen, ignore it and keep holding those three buttons down
5) Once you see the recovery screen, you can let go of the buttons and start using the recovery as you wish
How to enter DOWNLOAD mode on the Samsung Galaxy S3
Follow all the steps as above, except at step 2) press+hold VOL DOWN and HOME buttons together
Hi All
First of I would like to thank you all for having me on your forum.
Second, I live in South Africa, I have a Samsung Galaxy S3 and my service provider is Vodacom.
I am trying to root my device.
I did manage to get into the "Downloading" Mode and using Odin I managed to install the "clockworkmod"
The next step is to boot into recovery mode (Press and hold Volume Up, Home Button & Power Button) but my S3 does not want to go into recovery mode. When I follow the steps it freezes on The Galaxy Logo.
I really want to root my device to use ALL of the awesome stuff you guys develop.
Thank You in advance.
Only hold vol up + home + power until you see the white galaxy s3 writing then release
Sent from my GT-I9300 using xda premium
Hi
Thank You for the Reply.
I did only hold it down until the logo pops up and then I released.
It still freezes. I have tried holding it in for longer.
I have checked the net and came across different methods and that did not work.
Could it be that Vodacom changed how it goes into recovery mode?
I would say flash an open fw through Odin. *2767*3855# to clean phone from obsolete data. Make sure to backup what you need. Flash CF through Odin.
Boot to recovery through cwm app.
Sent from my GT-I9300 using xda premium
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Try "tool kit" from mskip. Step by step guide.very easy.
u just Dl. From links above and use tool kit to backup and flash.
all root and recovery tools are included.only full firmware is not included
SupTech86 said:
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
Click to expand...
Click to collapse
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
elevation_2 said:
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
Click to expand...
Click to collapse
Rom toolbox requires root. He is not rooted yet.
Sent from my GT-I9300 using xda premium
Just got mine from Vodacom and it happily goes into recovery mode with vol + home + power combo, sure this doesnt help you but there you go
mariosraptor said:
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Click to expand...
Click to collapse
Thank You Very Much
It worked! Now I am rooted thanks to You.
Really Thank You
Thank You all Very Much for the help and input.:good:
Just a question: What would you say is the best performance, Stable ROM out there?
Thank You
You are welcome. I am on wanamlite 1.5 and ninphetamine 1.2.0 kernel. Very good battery and as always wanam makes very stable and bug free roms.
Sent from my GT-I9300 using xda premium
Thank You
Where can I download it from.
The "Rom Manager" in playstore, Can this also install the wanamlite 1.5?
Thank You
http://forum.xda-developers.com/showthread.php?t=17058664
just try and read some before flashing. and Always search the XDA forum for what you want. do not expect everything always from someone.
remember to read everything before trying to flash and always backup backup backup.
i do not use rom manager for flashing and backup. in Clockworkmod I Trust!!! lol
A little late..
It's too late now but you could have just opened up terminal emulator and typed
su
reboot recovery
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
STORMER3000 said:
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
Click to expand...
Click to collapse
I can go into recovery mode, when I click on reboot system now, its not powering on??
CWM TOUCH RECOVERY FOR SAMSUNG GALAXY MEGA 6.3(GT-I9200)
Installation:-
1.Go to Download Mode By Pressing (Volume Down +Home +Power) And Connect Your Phone To PC.
2.Launch Odin v3.09.
3.Browse recovery.tar.md5 as PDA
4.Hit Start and Wait.
5.After Installation Go To CWM (Volume Up +Home +Power).
6.Make Sure That In Odin the Auto Reboot And F.Reset Time Checkboxes Are Selected, Uncheck The Re-Partition And Other Option.
Rooting:-
1.Download UPDATE-SuperSU-v1.34.zip from the download section.
2.Then go to cwm recovery.
3.Then choose install zip and then install UPDATE-SuperSU-v1.34.zip
4.Make sure that you have a cwm backup before doing rooting.
Download Link:-
Odin v3.09- http://d-h.st/UIo
CWM TOUCH RECOVERY - http://d-h.st/7VS
UPDATE-SuperSU-v1.34.zip- http://d-h.st/ikN
I DO NOT TAKE ANY RESPONSIBILITY WHAT HAPPENS TO UR PHONE.
Sorry my bad English, so I made another post format
mingyuehaokong said:
cwm touch recovery for samsung galaxy mega 6.3(gt-i9200)
installation:-
1.go to download mode by pressing (volume down +home +power) and connect your phone to pc.
2.launch odin v3.09.
3.browse recovery.tar.md5 as pda
4.hit start and wait.
5.after installation go to cwm (volume up +home +power).
6.make sure that in odin the auto reboot and f.reset time checkboxes are selected, uncheck the re-partition and other option.
Rooting:-
1.download update-supersu-v1.34.zip from the download section.
2.then go to cwm recovery.
3.then choose install zip and then install update-supersu-v1.34.zip
4.make sure that you have a cwm backup before doing rooting.
Download link:-
odin v3.09- http://d-h.st/uio
cwm touch recovery - http://d-h.st/7vs
update-supersu-v1.34.zip- http://d-h.st/ikn
i do not take any responsibility what happens to ur phone.
Sorry my bad english, so i made another post format
Click to expand...
Click to collapse
have you tried it buddy? The cwm?
Doesn't work or is the same CWM we already have.
I flashed it over the exiting CWM and it looks the same, certainly is not touch activated.
Does this method still show the 2 red lines of code at the top when booting?
Kangburra said:
Doesn't work or is the same CWM we already have.
I flashed it over the exiting CWM and it looks the same, certainly is not touch activated.
Click to expand...
Click to collapse
I'm having an absurd issue with my phone and really would like some expert advice.
I just bought my phone (GT-I9205). Is still all stock. I am trying to install CWM Recovery with ODIN but seems nothing gets flashed into the phone except that I am stuck with the stock Recovery.
USB Drivers correctly installed on my laptop and the flash process seems successful under ODIN (..tar file upload to phone goes smooth and and then phone successfully resets). But when I go back to Recovery mode, actually, nothing was flashed. Same old stock recovery screen. What the hell? Am I doing something wrong in ODIN settings (CWM tar file flashed as PDA and everything else as default), or is my phone crazy?.. I really have no idea whats going on. In fact Ive tried flashing other versions of CWM and same thing happens.
And my stock recovery screen itself has issues problems.. when entering the recovery mode it briefly displays the word ERROR and I get a sad Android guy with a RED explanation mark with the wording NO COMMAND. Totally stuck. I have positively no idea whats going on. Years flashing phones and doing all sorts of things, nothing like this before..
My phone was an open box.. maybe someone did something to it and totally messed it up.. no clue..
please is this valid for the 9205 lte? thankes
pleas delete
I tried this and it worked on the bell version model I527M
The red line when booting will gone if you flash back your kernel. ..stock kernal...
The rooting kernal is to provide su update...
Sent from my GT-I9205
defender007 said:
I tried this and it worked on the bell version model I527M
Click to expand...
Click to collapse
I can also verify this method works with Rogers i527m for recovery and root
work fine for me i have mega 6.3 gt I9200 nice work man thanks
Enviado desde mi GT-I9200 usando Tapatalk 4
I am with Sasktel and i have the SGH-I527M and this cwm recovery and SuperSU work great on this phone..thanks very much for this.
Samsung Mega i9200 rooted successfully and all working fine so far.
Can any help to root the i527 att please
Sent from my SAMSUNG-SGH-I527 using xda premium
I... seem to have an issue. I can't seem to find the USB Debugging mode on my GT-i9200... I literally don't have the option. Or... I'm going crazy.
1. Goto Settings -> About Phone.
2. Goto “Build Number” at the end of the Scroll list.
3. Tap on “Build Number” repeatedly (7 times). On your third tap you should see message indicating that you only have 4 more taps to go to ‘become a developer’.
4. Continue: 4 more taps.
5. Hooray, you are now a ‘Developer’, go back to the Setting page.
6. You should see Developer Option menu item in your setting list now.
7. Open Developer Options and check USB debugging > Ok
Kangburra said:
steps 1-8
Click to expand...
Click to collapse
I actually ended up not needing it, but it's nice to see I wasn't going insane for the time I spent looking for it... Thanks again.
Question
Any New Update for CWM???
I've just updated my I9200 into I9200XXUBMJ4 XSE, and CWM 6.0.3.2 couldn't be used. I flashed via odin and try to boot into and It just say No Command and back to old Stock recovery.
Any ideas???
pikwan80 said:
Any New Update for CWM???
I've just updated my I9200 into I9200XXUBMJ4 XSE, and CWM 6.0.3.2 couldn't be used. I flashed via odin and try to boot into and It just say No Command and back to old Stock recovery.
Any ideas???
Click to expand...
Click to collapse
Not sure on this but did you root your phone since the update..if not try kingoroot and then try flashing the recovery again.
Sent from my SGH-I527M Mega 6.3
On my first firmware I9200 XSE XXUMAEE, I have rooted the device using latest i9200-cwm-recovery(201362118259).tar and superSU 1.51 and works fine, then I reinstall ( flash ) the firmware using the original firmware from sammobile XSE XXUMAEE to restore back everything to receive OTA into XSE XXUBMJ4, when UBMJ4 successfully updated my I9200 I tried to install i9200-cwm-recovery(201362118259).tar and flashed successfully via odin, and I used the usual way to boot into CWM but cannot run and the device run the stock recovery. I've tried last TWRP 2.0.3 and still the same.There is no other way and I flash original I9200 XSE XXUMAEE ( Downgrade ) and clean the device using CWM ( format /system ) then flash again I9200 XXUMAEE. Now I'm still using XXUMAEE and rooted, waiting for the new CWM. This is all my experience. at CWM last log all my i9200 system back to XXUMAEE except bootloader still remain XXUBMJ4.
By the way what is kingoroot??? never heard that.
---------- Post added at 09:31 AM ---------- Previous post was at 09:25 AM ----------
Guys, When I tried XXUBMJ4 on my I9200, it run like android 4.3 have move to sd feature and everything new and consume less RAM. Can't hardly wait for new CWM.
Thanks for the experts who create this CWM.
Love CWM more than TWRP.
hi all, ive downloaded this custom rom (xaiomi rom for samsung galaxy s4 gt-i9505) and ive followed the step by step to install this new rom (yep, im still a noob to this) and now my phone seems to be stuck on the start up. im not sure what i did wrong because i made sure the rom was for my device. i used CWM to install it via ROM manager and now its stuck, i done what it told me to do like do a factory reset (i done that with cwm) and backed up all my data with TIBU but its just stuck, any ideas on what i should do? ive tried the battery pull and tried to boot into cwm recovery but it says in little blue writing *booting* or something like that but then it just returns to start up and freezes :/ thanks in advance
Please help asap!!!
please help me because i dont have a computer and im at my friends house leaving soon and i want to fix this before i go!!!!!
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
SeraphSephiroth said:
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
Click to expand...
Click to collapse
does it matter what odin i use?!?!?!
phattpro1 said:
does it matter what odin i use?!?!?!
Click to expand...
Click to collapse
Nope
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
DANNY_DANIEL said:
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Click to expand...
Click to collapse
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Dakura said:
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Click to expand...
Click to collapse
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
MistahBungle said:
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100"
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Dakura said:
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
DANNY_DANIEL said:
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
Click to expand...
Click to collapse
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
yes can. give me 12 hours for try this. thanks for help! :good:
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
DANNY_DANIEL said:
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
Click to expand...
Click to collapse
Are u sure u are doing everthing correctly? You need to download stock from your region, check if you stock firmware is correct, you can search your development forums for stock firmware mirrors or you can download from samfirmware.com , you need to put it on PDA, and then just flash.
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
dinoredfield said:
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Before i update SuperSU, My WeChat Can't open moment, i know it problem in WeChat apps. Btw my SdCard not detect. And my gallery can't open and show the text "Not enough space. Delete unnecessary items such as ... pictures, videos..." that why i exchange to revolutionROm. It like Samsung note 3/Galaxy s4. Then SuperSU command update a SuperSU in CWM and i have a problem. -_- . now my phone back to normal, just gallery can't open. I remove the SdCard. it same.
As the message said, delete unnecessary items, if that doesn't work, format sd card (internal and external both) and if that doesn't work, use nuke script, re-install rom.