Need to go back to stock for 2 reasons.
Changing carriers.
Sprint connection optimizer does not work with our wifi setup.
So ICS,
The phone has hboot 2.09.0000, radio 1.12.11.1210
Where can i find the proper RUU?
Thank you
newtooroot said:
Need to go back to stock for 2 reasons.
Changing carriers.
Sprint connection optimizer does not work with our wifi setup.
So ICS,
The phone has hboot 2.09.0000, radio 1.12.11.1210
Where can i find the proper RUU?
Thank you
Click to expand...
Click to collapse
Are you S-off? If so you can use VipeRUU. Otherwise, there is no RUU for the latest OTA updates.
Here is the link to VipeRUU:
http://forum.xda-developers.com/showthread.php?t=2197909
If you're not S-off, you can use Moonshine to gain S-off. Link is below:
http://forum.xda-developers.com/showthread.php?t=2321072
Sent from my HTC EVO 4G LTE
yes
FinZ28 said:
Are you S-off? If so you can use VipeRUU. Otherwise, there is no RUU for the latest OTA updates.
Here is the link to VipeRUU:
http://forum.xda-developers.com/showthread.php?t=2197909
If you're not S-off, you can use Moonshine to gain S-off. Link is below:
http://forum.xda-developers.com/showthread.php?t=2321072
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I am s off and will use this for sure. Thanks for the help
No problem.
Sent from my HTC EVO 4G LTE
Did this work for you? How long does it take to flash?
It says it doesn't detect my phone but it clearly says it's EVO in my file manager... I'm not sure what line i should be replacing and I can't reply in that forum because of my noob status...
ifi use ruu mode? how long?
manually get the unlockcode.bin file (had one saved) and put it in the subdirectory before you run this and it works so much better...
just my experience.
Related
I am needing to update to the newer 2.17.651.5 AS AN RUU FILE
i am relocked from the htc unlock method so i am locked again
since i am on revol wireless with working 1x data i can no longer get updates to the rom just the htc updates for apks.
Can someone please post the ruu for this...
i have tried one or two of the pg86img.zip file and placded it on the sd card. it sees it but wont prompt me to do anything with it.
RUU 2.17.651.5 for Sprint Evo 3D
4sopa said:
I am needing to update to the newer 2.17.651.5 AS AN RUU FILE
i am relocked from the htc unlock method so i am locked again
since i am on revol wireless with working 1x data i can no longer get updates to the rom just the htc updates for apks.
Can someone please post the ruu for this...
i have tried one or two of the pg86img.zip file and placded it on the sd card. it sees it but wont prompt me to do anything with it.
Click to expand...
Click to collapse
4sopa,
I am also looking for the Sprint version of this. (RUU 2.17.651.5) for my Evo 3D.
Has anyone helped you?
I don't believe anyone has posted it yet. You can always use the 2.08.651.5 RUU and then take the OTA though
And with a handle like '4sopa', in Jan. 2012, good luck.
Lock it and run this ruu: http://forum.xda-developers.com/showthread.php?t=1239821
then you should be able to flash the upgrade or some of its 'bits'.
tailsthecat3 said:
And with a handle like '4sopa', in Jan. 2012, good luck.
Lock it and run this ruu: http://forum.xda-developers.com/showthread.php?t=1239821
then you should be able to flash the upgrade or some of its 'bits'.
Click to expand...
Click to collapse
I like sips cause the web is like the wild wild west. I think we need to start having licences and using real names and locations as part of each post. Put I think each update should have the ruu and pg86img and all released from HTC web site.
I dis that already I can't use the regular software check as i am on revol wireless with working 1x data. It tells me issue number something or another. I need the ruu as that seems the only way for.me to update
Sent from my PG86100 using xda premium
xHausx said:
I don't believe anyone has posted it yet. You can always use the 2.08.651.5 RUU and then take the OTA though
Click to expand...
Click to collapse
Where can I find the RUU you listed above?
Evo3Duzer said:
Where can I find the RUU you listed above?
Click to expand...
Click to collapse
Its not available. Poster meant .2/.3.
Think I linked to one of them...
tailsthecat3 said:
Its not available. Poster meant .2/.3.
Think I linked to one of them...
Click to expand...
Click to collapse
^^^ sry, meant .3
I would give you a link to the mirror but being that it's property of HTC that would make this site eligible to be blocked by SOPA.... (yes, really)
Ask HTC or Sprint, Sprint will be able to flash it for you and is probably your best bet.
You mean RUU that is in sticky thread in development section?
Odoslané z môjho HTC EVO 3D X515m cez Tapatalk
4sopa said:
I am needing to update to the newer 2.17.651.5 AS AN RUU FILE
i am relocked from the htc unlock method so i am locked again
since i am on revol wireless with working 1x data i can no longer get updates to the rom just the htc updates for apks.
Can someone please post the ruu for this...
i have tried one or two of the pg86img.zip file and placded it on the sd card. it sees it but wont prompt me to do anything with it.
Click to expand...
Click to collapse
Try to use internet pass through mode to share PC's internet connection and then check for update see if that works...
Hey All,
I am trying to install the OTA for ICS that was released by Rogers today for my EVO 3D.
I am rooted and unlocked but with the stock Rogers ROM and I also have S-OFF.
The problem I am running into is that I am able to download the upgrade but when I go into HBoot and try to apply it I get a signature verification failed.
Originally I thought it might have been a bad download so I downloaded it a 2nd time, same result.
So I thought, what the hell, I will turn off the signature check and try it again. This time I get an error that the 'assert failed: check_cid(getprop("ro.cid").' and the installation aborted.
Does anyone have any insight into why this would fail? I am hoping to apply this but not sure why its a no go.
Thanks for the help in advance.
Cheers, Crash
Have you ever changed your cid? run "fastboot getvar cid" and post what it says. If your cid is original for rogers, the ota may not be working because you are s-off.
Hey @patrick92260
I have not checked my CID, not really sure how actually.
In order for me to run that command I would have to be hooked up to ADB I assume? If so thats going to need to wait until I get home tonight to try that and give you the results, unless there is another way I can run that command?
Thx for the reply
Yeah it's done through ADB. If you don't really know what the cid is, you probably haven't changed it. If you have the stock recovery, then the reason the ota isn't working has to be because you are s-off. you will probably have to wait for an RUU to upgrade to ICS.
Makes sense then. Would setting S-ON make it so I can apply it? Or would that not be worth the effort?
Honestly I can wait a bit longer, we have been waiting this long for it
Thx for the help.
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
If you originally used revolutionary to get s-off, then you have radio s-off which is the highest level of s-off you can have and i would not recommend trying to set it back to s-on. i also have a rogers evo 3d and i am using the asian RUU ICS and it works fine while letting me keep s-off after flashing it so i would recommend using that RUU if you want ICS.
---------- Post added at 01:10 PM ---------- Previous post was at 01:07 PM ----------
SaHiLzZ said:
But you should be able to get back to S-ON by flashing Gingerbread RUU, no?
Click to expand...
Click to collapse
If he has radio s-off you can flash any RUU you want and it will not turn it back to s-on. Radio s-off is basically permanent since it removes the data in the S58 section of the phone. The fake s-off is the one you need to be careful with which is usually done by using a hacked hboot.
patrick92260 said:
If your cid is original for rogers, the ota may not be working because you are s-off.
Click to expand...
Click to collapse
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Kemanorell said:
Bull**** Bull**** Bull****.
For getting OTA you need NOT rooted and NOT deodexed Stock-rom+stock recovery.
Don't try to make S-ON, it is great chance to brick the phone.
And your CID you can get with cid getter from the market.
Patrik, stop it plz.
Click to expand...
Click to collapse
lol good one, so why would my evo 3d not flash the ota with a completely stock rom and recovery then with no root? only thing it had was s-off.
---------- Post added at 01:28 PM ---------- Previous post was at 01:24 PM ----------
Crash1912 said:
Is there any risk or advantage to used to Asia one? Not sure I want to have that one my phone over the NA ones.
Would there not be a RUU or this Rogers release? Maybe I should just say the hell with it and just ROM it?
Click to expand...
Click to collapse
It's a toss up if the RUU for rogers or the europe ICS ever shows up here. I am using the asian one and don't really notice any difference over the rogers or europe update. If you have radio s-off you can always downgrade by flashing a gingerbread RUU if you don't like the asian ICS RUU.
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
I had to run the Rogers gb ruu 1.20.631.2. It then update to 631.3 when I checked for updates. I then booted checked for updates again and it updated to ics. Now I'm running official Rogers ics but as I said I had to roll all the way back 1.20.631.2 and update all the way up from there.
And it does update the hboot but you can downgrade it with ruu previously mentioned.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
js593 said:
Please link how this is done. I quickly scammed google, and couldnt find how to roll back to this. Looking to do ICS update today sometime.
Click to expand...
Click to collapse
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
healer82 said:
Somewhere in the development thread there is a thread with shipped ruus already covered to pg86img.zip. Just find the Rogers one and put it on the root of your sd card and boot into bootloader. It will detect it and install 1.20.631.2 then just manually check for updates under about phone. The first update should be 1.20.631.3 which is 9.35mb then xcheck again and it's the ics update around 306 mb. Sorry I can't link to it you'll have to search the development forum. I've had it since it was posted way back when on my phone.
Make sure it's renamed PG86IMG.zip
http://forum.xda-developers.com/showthread.php?p=16450859
Sent from my HTC EVO 3D X515a using Tapatalk 2
Click to expand...
Click to collapse
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
js593 said:
Would this be it?
http://forum.xda-developers.com/showthread.php?p=22501510&highlight=rogers#post22501510
Click to expand...
Click to collapse
That seems to be the one yes.
Sent from my HTC EVO 3D X515a using Tapatalk 2
Ive tried to do this, after downloading it and putting it in the root directory of my phone. Hboot sees the image, stalls there for a few seconds then continues. nothing has happened. Ive tried installing it from CWM, no difference. I think i may need a bit more help then this. After it was detected, i did go and see if it was downgraded in the ABOUT, but it sits at .3 still.
Any ideas?
Okay, so for those people out there that are looking to do this, here's the functional way it worked for me (no errors, nothing happened during the update)
Download the .exe file,
EXECUTE the exe file from windows while the phone is plugges in. This will revert back to .2
Put phone into a wireless network once back up and running.
Update the phone as neccessary.
After the update, i noticed my Hboot when to 1.53.007. Now we just need to wait for a root.
Also, when i went into Recovery from Hboot, i noticed that it didnt do anything, sat there with a pic of my 3D and it had a red exclamation point. should that happen?
no luck
hi i have tried every method here with no go. i have s-on and phone is rooted. can some one post a working rom or something for the love of android!
looks like it was the bootloader it needs to be relocked using rootevo3dnew.zip. which will allow you to downgrade using the ruu file in windows. followed by the 2 updates in about phone and i got the ICS yay! if you have trouble search youtube for the video on "relocking evo 3d bootloader" it was easy, good luck ppl.
Has anyone else tried running the 2.13 RUU? I get an unknown error '155' everytime. Re-locked EVO with 1.19 Hboot.
Done it twice before without issue, matching RUU to ROM on phone each time.
Did HTC release a bad RUU? Any advice on how to correct? Thanks.
Did you re download it? Maybe you have a corrupt download.
metalfan78 said:
Did you re download it? Maybe you have a corrupt download.
Click to expand...
Click to collapse
Thanks for the suggestion, I'll attempt a fresh one and report back!
atlgator said:
Thanks for the suggestion, I'll attempt a fresh one and report back!
Click to expand...
Click to collapse
Tried a fresh download, that wasn't it. I've noticed upon relocking using fastboot-oem-lock prior to RUU flash attempt, the phone reboots to bootloader and I get a Tampered | Relocked | Security Warning image. I'm thinking there must be something out of whack between the the RegawMOD rooter, the latest stack of Android SDK tools I use to re-lock, and the 1.19 HBoot from the latest OTA.
I took the damn OTA as it promised better LTE hunting. You can't hunt what isn't there in Atlanta, I guess.
Any other ideas are appreciated.
Hopefully someone can help, I haven't had to run the RUU so I'm not sure how to troubleshoot.
i ran it worked on mine...ended up with hboot 1.19 but i still have s-off...
evo4ger said:
i ran it worked on mine...ended up with hboot 1.19 but i still have s-off...
Click to expand...
Click to collapse
Source link of RUU you used please?
Sent from my Galaxy Nexus using Tapatalk 2
atlgator said:
Source link of RUU you used please?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
im almost certain i used the one listed off the mikmik site but ill check when i get home...
2.13.651.1 710RD RUU 155 error
atlgator said:
Has anyone else tried running the 2.13 RUU? I get an unknown error '155' everytime. Re-locked EVO with 1.19 Hboot.
Done it twice before without issue, matching RUU to ROM on phone each time.
Did HTC release a bad RUU? Any advice on how to correct? Thanks.
Click to expand...
Click to collapse
I'm running into the exact same thing. Has anyone gotten around this? Bootloader was unlocked when I tried previously. Would relocking it and then rerunning RUU fix the issue? Obviously trying to avoid a situation that I won't be able to recover from. Thanks
How bout trying to grab it off the dirtyracoon website, and rename the file to PJ75IMG, stick it on the as card, and reboot into bootloader?
Sent from my EVO using Tapatalk 2
I have a Sprint HTC Evo 3D with HBOOT 1.58 running ICS. I managed to Unlock the Bootloader and get TWRP on it...but when I try flashing [ROM] CyanogenMod 11.0 - VILLUMINATI, it throws up an error...I admit, i've not tried any other ROM but that one seems to be the one that i want. I have re-downloaded it and get the same results. Do I need S-OFF? I think I still have S-ON.....I just got this phone so i'm very new to it....and I can't post in the thread about that ROM b/c of my low post count.....
You will need soff and to change your hboot to 1.50 or lower.
ICS needs 1.57 or 1.58
Anything else needs 1.50 or lower
Sent from my Evo V 4G using XDA Free mobile app
hossman said:
You will need soff and to change your hboot to 1.50 or lower.
ICS needs 1.57 or 1.58
Anything else needs 1.50 or lower
Sent from my Evo V 4G using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for that...I watched a video on it, and maybe i can do it...this is the most "Extreme" method of "modding" a phone software.....The ROM i'm trying to install is 4.4.2 I think, so I need to keep it at 1.58 I assume for that?
NOW i got another problem. Trying to get the RUU file installed from a guide i found on here and i had to run that SetLowVer app or whatever its called and RUU Installer shows its 1.00.000.0 and trying to update to 2.89.651.2 but it fails every time!
EDIT: Got the RUU done, turns out I had to RELOCK the device
EDIT 2: I have S-OFF now! Now gotta figure out how to "downgrade" HBOOT
Dvdxploitr said:
NOW i got another problem. Trying to get the RUU file installed from a guide i found on here and i had to run that SetLowVer app or whatever its called and RUU Installer shows its 1.00.000.0 and trying to update to 2.89.651.2 but it fails every time!
EDIT: Got the RUU done, turns out I had to RELOCK the device
EDIT 2: I have S-OFF now! Now gotta figure out how to "downgrade" HBOOT
Click to expand...
Click to collapse
Did you figure it out?
If you have s off the hard part is done!
To change hboot all you need to do is flash a pg86img through bootloader
Sent from my Evo V 4G using XDA Free mobile app
hossman said:
Did you figure it out?
If you have s off the hard part is done!
To change hboot all you need to do is flash a pg86img through bootloader
Sent from my Evo V 4G using XDA Free mobile app
Click to expand...
Click to collapse
Yup! All Done! This thread can be closed/deleted at this point if need be..
Hey all,
I am looking to sell my Evo 4g lte because sprint really messed things up but that is neither here nor there. I would like to return it to stock for ease of selling it. can i do this without having a stock rooted rom and if possible can i run the updates to get the phone current for the next user? IF one of you want the rooted phone pm me i am up for anything.
Phone has MEAN BEAN rom on it and is s-off h boot 1.12.2222 radio 1.12.11.1210
thanks
stubby
stubby1 said:
Hey all,
I am looking to sell my Evo 4g lte because sprint really messed things up but that is neither here nor there. I would like to return it to stock for ease of selling it. can i do this without having a stock rooted rom and if possible can i run the updates to get the phone current for the next user? IF one of you want the rooted phone pm me i am up for anything.
Phone has MEAN BEAN rom on it and is s-off h boot 1.12.2222 radio 1.12.11.1210
thanks
stubby
Click to expand...
Click to collapse
Hit the top link in my sig and go to the section on RUU's. At the bottom of the first post I have links to all applicable RUU's for the EVO LTE. Easiest thing would be to run one of them if you want to get back to stock. If you want to go back to being S-on and stock, use VipeRUU.
Magnum_Enforcer said:
Hit the top link in my sig and go to the section on RUU's. At the bottom of the first post I have links to all applicable RUU's for the EVO LTE. Easiest thing would be to run one of them if you want to get back to stock. If you want to go back to being S-on and stock, use VipeRUU.
Click to expand...
Click to collapse
Thanks Magnum
Using the VipeRUU was supper easy and quick. Back to stock off to sell.:good:
Not a problem. Just remember that the RUU is run from your computer. Connect your phone and PC via USB cable, and once the connection is complete double-click the RUU file to start the installer. You may need to install HTC Sync so that you have the proper drivers installed on your computer. It takes about 10-15 minutes for the RUU to run, so be patient. VipeRUU is a little bit different. When you double-click the file to start the process, it will bring up a menu with options in it for you to choose from. It's pretty straightforward, though.
I've run VipeRUU a few times, but the bootloader stays unlocked. Anyone have any suggestions to get it back to a "Locked" state? I'm S-OFF, HBOOT 2.09.
Sent from my EVO using Tapatalk
CornDogg said:
I've run VipeRUU a few times, but the bootloader stays unlocked. Anyone have any suggestions to get it back to a "Locked" state? I'm S-OFF, HBOOT 2.09.
Sent from my EVO using Tapatalk
Click to expand...
Click to collapse
fastboot oem lock
Sent from my Nexus 5 using XDA Premium 4 mobile app
That would just make it show "Relocked", though, right?
Sent from my EVO using Tapatalk
Evolution_Freak said:
fastboot oem lock
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't believe that will work being S-off (I've tried it before just for kicks and it didn't do anything). Even if it did, the bootloader would show the tampered and unlocked warning.