Root access without USB cable? - AT&T Samsung Galaxy Note I717

hello friends. I have a Note i717 At & t. with a problem that does not recognize the USB cable. mini port only works for me to change the battery. (nobody could sorting that problem) -
is there any way to access root without usb cable?
PS: I have the Stock 2.3.6
and thanks in advance.

Not sure exactly what your asking.........3 possible questions out of this.
Computer does not recognize when phone is plugged in?.....need to re install drivers.
Trying to access root????? On phone? Is Superuser installed?
Remember also, when going into phone on computer, you need to right click to browse files.
Not sure if what your asking. Was my best guess from your english.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

You MUST use a computer and usb cable to gain root!

captemo said:
Not sure exactly what your asking.........3 possible questions out of this.
Computer does not recognize when phone is plugged in?.....need to re install drivers.
Trying to access root????? On phone? Is Superuser installed?
Remember also, when going into phone on computer, you need to right click to browse files.
Not sure if what your asking. Was my best guess from your english.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I do not speak English. I apologize for that.
use google translator.
I checked that my port is Note. the load is not connected only by USB
I wanted was to root and then try to update the rom and put Cyanogenmod with Rom Manager. but I can not do root

lildark7 said:
I do not speak English. I apologize for that.
use google translator.
I checked that my port is Note. the load is not connected only by USB
I wanted was to root and then try to update the rom and put Cyanogenmod with Rom Manager. but I can not do root
Click to expand...
Click to collapse
Not without computer no. Sorry
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Before despairing, check:
* USB cable works for data (there exist "charging cables" - these will ONLY charge)
* Drivers installed on the computer being used and are known working.
I think the USB port on the note is kinda failure prone. My friend's note stopped charging after about 15 months (due to bad connector).
Worst case, you may have to replace the microusb port and associated board (It was a pretty easy replacement). Make sure you get the right one for your version of phone (i717 vs international/etc).

Related

Root or flash 2.3.3 without PC or anything using USB port

Hi.
My phone is a GT-I9100, who is stuck in 2.3.3, but the USB doesn't work : when I plug him to my computer, it's charge but the PC doesn't see him (no error message or anything like that, and invisible in device manager). The phone open MTP application, and "connected" appear, but it does nothing. If I try to use the mobile as mass storage (with USB menu or USB debugg), the mobile just charge.
When I search an Update with OTA, the mobile doesn't find any update.
So I need help, I tried change cable, PC, reboot, *#7284#, desinstall-reinstall drivers/Kies, plug in a Live-CD of Debian, clean the micro-usb port with alcohol and brush... I hope nothing of this port for now.
But I don't want to be blocked in this obsolete version and I searched for tricks to root or flash the phone without using the USB port, and I found two things :
- A file which can be flashed in stock Recovery, but ICS only
- Gingerbreak. I tried and it did no work.
Please, anyone's got an idea ? Or a nice developer can create a flashable by stock recovery to unlock this situation ?
Thank you ! (Forgive me if I made some mistakes, it's not my mother tongue)
Please :/
Need some help, Please !
SxScread said:
Hi.
My phone is a GT-I9100, who is stuck in 2.3.3, but the USB doesn't work : when I plug him to my computer, it's charge but the PC doesn't see him (no error message or anything like that, and invisible in device manager). The phone open MTP application, and "connected" appear, but it does nothing. If I try to use the mobile as mass storage (with USB menu or USB debugg), the mobile just charge.
When I search an Update with OTA, the mobile doesn't find any update.
So I need help, I tried change cable, PC, reboot, *#7284#, desinstall-reinstall drivers/Kies, plug in a Live-CD of Debian, clean the micro-usb port with alcohol and brush... I hope nothing of this port for now.
But I don't want to be blocked in this obsolete version and I searched for tricks to root or flash the phone without using the USB port, and I found two things :
- A file which can be flashed in stock Recovery, but ICS only
- Gingerbreak. I tried and it did no work.
Please, anyone's got an idea ? Or a nice developer can create a flashable by stock recovery to unlock this situation ?
Thank you ! (Forgive me if I made some mistakes, it's not my mother tongue)
Click to expand...
Click to collapse
I don't think there is anything like that for our device.
however, If you want to root your gingerbread device without flashing kernel but with PC usb connection (yes, try another PC), I can help you
Wouldnt life be a hell of a lot easier if you spent £7 on a new usb/mic board.Youve had a month to save for one lol.
Sent from my GT-I9100 using xda premium
Love how you have specified the gender of your phone
If it were that simple, the problem would have been solved: I tried three different pc, with 3 different cables, the problem is well at the USB connector of the mobile phone to be damaged. I have root and flashed my Galaxy Spica, Teos, Nexus, and an Xperia Arc and Ray owned by friends, so I have some basics and I already know how to flash with Odin, but thank you for help that you propose.
@ Theunderling: You mean this stuff? cellphone-repair-shop.com/product_images/w/159/GH59-10949A__27631_zoom.jpg I did not need a soldering iron, or such material to change it?
Thank you everybody
You can see a breakdown of the phone by diwnloading a service manual off the samsung site.
You dont need a soldering iron to change the usb board.
Sent from my GT-I9100 using xda premium
SxScread said:
If it were that simple, the problem would have been solved: I tried three different pc, with 3 different cables, the problem is well at the USB connector of the mobile phone to be damaged. I have root and flashed my Galaxy Spica, Teos, Nexus, and an Xperia Arc and Ray owned by friends, so I have some basics and I already know how to flash with Odin, but thank you for help that you propose.
@ Theunderling: You mean this stuff? cellphone-repair-shop.com/product_images/w/159/GH59-10949A__27631_zoom.jpg I did not need a soldering iron, or such material to change it?
Thank you everybody
Click to expand...
Click to collapse
are you out of your warranty period?
Swyped from my Samsung Galaxy SII
@Jokesy : It is no longer under warranty unfortunately :/
@Theunderling Do you have a particular usb board link for me?
I found the guide thank you
I dont talk french lol.
Sent from my GT-I9100 using xda premium
theunderling said:
I dont talk french lol.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Sorry I edited the post ^^'
Here it is on mytrendyphone.uk site.But shop around as it should be cheaper
Sent from my GT-I9100 using xda premium
I found one on ebay for $ 10 and I also found a video that explains the process of replacing the port, thank you
( youtube.com/watch?v=aChzv3IzxsU and ebay.com/itm/OEM-Flex-Cable-Charging-Charger-Connector-Port-USB-Samsung-Galaxy-S2-i9100-/200709522273#ht_1474wt_1397 )
Ive got one here but Im keeping it for a spare.
Good luck anyway.
Sent from my GT-I9100 using xda premium
Well, I ordered and replaced the port, it has not changed anything, I've been seeing a repairman, he again changed the port, and still nothing. Now I'm going to buy a rope and a stool.
Im beginning to think it must be some small component on the motherboard that must be faulty.Was helping a guy on here the other day and he tried 3 of the usb boards and it still didnt work properly.
sent from my gt-i9100 since I cant be arsed using my laptop
So, what can I do ?

Phone not recognized in MTP, USB mass storage or even in download more! Help please!

I have been in vacation for a week and when today i turned back home i wish to transfer the photos into the PC, but my phone can't be recognized by my pc or other's. Even in download mode, MTP, USB mass storage...please give me some help!
I'm on Cyanogen Mod 9.1.0 with stock kernel!
Sorry for the bad english friends!
Does the phone charge when connected via USB?
If not: your USB connector might be broken.
If yes: did you change anything on the phone since it last worked?
The phone charge with USB cable and even with the original charger.
The connector is working with other phones. I thing something is broken...not software issue i think.
sorcio91 said:
The phone charge with USB cable and even with the original charger.
The connector is working with other phones. I thing something is broken...not software issue i think.
Click to expand...
Click to collapse
try cleaning the microusb port of your phone with tooth brush
Might be silly, but have you installed the driver for the phone? Try reinstalling them by installing Kies.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Might be silly, but have you installed the driver for the phone? Try reinstalling them by installing Kies.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I tried with 2 computers...
Jokesy said:
try cleaning the microusb port of your phone with tooth brush
Click to expand...
Click to collapse
I will try this, i have also tried a "electric contact cleaner" in spray, but no way.
The only way is to send it to Samsung, but i'm on CM 9 and since the phone is not recognized in download mode, i should flash the original firmware with mobile odin, am i right? It will be all right for the warranty?
sorcio91 said:
The only way is to send it to Samsung, but i'm on CM 9 and since the phone is not recognized in download mode, i should flash the original firmware with mobile odin, am i right? It will be all right for the warranty?
Click to expand...
Click to collapse
Try any of these combinations:
1. Ensure you have kies is up to date.
2. In Device Manager - uninstall driver (!) & then reinstall.
3. In Control Panel - click on troubleshoot, hardware and sound, configure a device.
Option 2 worked for me.

[Q] Firmware upgrade encountered an issue.

how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app

[Q] Rooting and adding CWM with a broken USB port?

My brother has given me his old Galaxy S3 phone, which is great, but.... the mini USB port is broken! I have to recharge the battery externally (will be buying a spare battery and external charger soon!)
I've managed to unlock it OK, but I like to root and add new ROMs and generally mess with my phones. I've had a dig around and the only rooting etc instructions I've found involve connecting to your PC. The USB is completely dead, I can't use it for charging or connecting to the PC.
Is there a way round this? Presumably once I am rooted and have CWM I can flash ROMs away to my hearts content IF I can get over this hurdle.
Any pointers much appreciated
Al
(PS - anyone know how easy it is to replace the mini USB port??!)
aliaird said:
My brother has given me his old Galaxy S3 phone, which is great, but.... the mini USB port is broken! I have to recharge the battery externally (will be buying a spare battery and external charger soon!)
I've managed to unlock it OK, but I like to root and add new ROMs and generally mess with my phones. I've had a dig around and the only rooting etc instructions I've found involve connecting to your PC. The USB is completely dead, I can't use it for charging or connecting to the PC.
Is there a way round this? Presumably once I am rooted and have CWM I can flash ROMs away to my hearts content IF I can get over this hurdle.
Any pointers much appreciated
Al
(PS - anyone know how easy it is to replace the mini USB port??!)
Click to expand...
Click to collapse
Maybe just borrow other USB? Or why did your brother give you his S3,maybe he bought a new phone,so use his USB.
Btw,as I know USB's aren't expensive. Just buy new one yourself.
Btw:
http://forum.xda-developers.com/showthread.php?t=1704138
AssassinGEO said:
Maybe just borrow other USB? Or why did your brother give you his S3,maybe he bought a new phone,so use his USB.
Btw,as I know USB's aren't expensive. Just buy new one yourself.
Btw:
http://forum.xda-developers.com/showthread.php?t=1704138
Click to expand...
Click to collapse
I think he means that the usb port on his device is broken, not the cable or charger, so he can't connect it to the pc to flash stuff.
I think you may be out of luck unless the rom is that old one that has the exynos exploit.
kadopt said:
I think he means that the usb port on his device is broken, not the cable or charger, so he can't connect it to the pc to flash stuff.
I think you may be out of luck unless the rom is that old one that has the exynos exploit.
Click to expand...
Click to collapse
Whoops,misread that. Sorry
thanks guys. Will see how to move this to correct forum! (previous recent phones have been Chinese imports, I'm not used to multiple sub forums for just one phone!)
The Rom is 4.1.2 if that helps?
aliaird said:
thanks guys. Will see how to move this to correct forum! (previous recent phones have been Chinese imports, I'm not used to multiple sub forums for just one phone!)
The Rom is 4.1.2 if that helps?
Click to expand...
Click to collapse
Try this, the app ckecks if device is exploitable and i think it can root. If you can root you can use mobile odin to flash a custom recovery then you can flash anything or keep using mobile odin to flash stuff.
http://forum.xda-developers.com/showthread.php?t=2050297.
Thanks for the pointer Kadopt. Sadly when i click on "Root device" it says "FAILURE: Could not root device"
Any other ideas out there?!
Just root using framarooot if u using old firmware
Sent from my GT-I9300 using XDA Premium 4 mobile app
Tried all the Famaroots, thanks for the thought. My baseband is i9300xxella which seems to be an up to date-ish one unfortunately
You could replace the motherboard but that isn't cheap. I haven't done it myself but I believe there are ways of rooting without a PC if you have an older firmware
Sent from my GT-I9300 using Tapatalk

[Q] Please help me to go back to stock rom / problem with connecting to PC

Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.

Categories

Resources