[Q] Continuous bootloop - Motorola Droid RAZR

Hello, yesterday while trying to encrypt a folder in the internal memory in the beta program, I discovered to my horror that the entire internal memory(sdcard) have been erased. I do not know how or why. After reset, the overhang on the logo. I have uploaded JB o2, retail Europe, does not start up the phone. Overhang on the logo or bootloop. I try this http://forum.xda-developers.com/showthread.php?t=2505254. In the end I took the tutorial in this topic http://forum.xda-developers.com/showthread.php?t=2194825&highlight=unbrick&page=4, phone starts up but after a reboot bootloop. After re-uploading the Blur files phone starts, but after a reboot bootloop again. Does anyone have any ideas?
Regards

kamel828 said:
Hello, yesterday while trying to encrypt a folder in the internal memory in the beta program, I discovered to my horror that the entire internal memory(sdcard) have been erased. I do not know how or why. After reset, the overhang on the logo. I have uploaded JB o2, retail Europe, does ot start up the phone. Overhang on the logo or bootloop. I try this http://forum.xda-developers.com/showthread.php?t=2505254. In the end I took the tutorial in this topic http://forum.xda-developers.com/showthread.php?t=2194825&highlight=unbrick&page=4, phone starts up but after a reboot bootloop. After re-uploading the Blur files phone starts, but after a reboot bootloop again. Does anyone have any ideas?
Regards
Click to expand...
Click to collapse
First of all stay calm and relax all can be solved....
The best way for flash again the rom is use rds lite
For flash a 4.1.2 you have to use rds lite 6.0 (google it)
Also you need to install the usb drive otherways your razr will not connect perfectly
If you have the 4.1.2 europe try another one like the german retail or the franch one
SO:
Turn off (power botton and vol -)
Let it charge a little bit (half battery will be ok)
enter recovery mode (power vlo- vol+)
go in ap fastboot using vol - and power for confirm
decompress the file you want to flash (in a folder and rename as you like)
launch the rds (remember install mototrala driver)
search the folder where you extract the rom and double click on .xlm file
plug the phone in pc,wait few seconds (10)
click on start
wait
done
some link
rds 6.0 http://forum.xda-developers.com/show...php?p=32900727
Motorola drivers https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/action/auth
rom to flash http://forum.xda-developers.com/showthread.php?t=2231289 Retail british work for me
Finger crossed for you

Phone starts after flashing, but after switching off no longer runs. It hangs on a moving logo Motorola. Every few attempts to phone starts up again after a reboot unfortunately hang.Wipe data and cache does not help. I used RSD Lite 6.0, I downloaded the drivers from the Motorola version 2.43, the system is a Retail France from the given topic. Regards and thanks for help.
EDIT:
Phone boot up in BP HW Test mode in stock recovery. After reboot in normal mode phone still bootloop.
Regards

Anyone have any idea? I ran out of ideas. I had installed BBM and Retail JB slot 1 if it has any meaning.

Related

Shucks another bricked razr

Well I got myself into it this time. I have a Rogers Canada XT910 razr. I installed the Arctic rom and lost all my data connection, and all my apps and could not reload them from google play because it says they are already installed. So I did a wipe and reset and decided to try to use RSD to reflash the ics leak. The flash failed, and my phone is bricked. What's guy to do.
Thanks
John
http://forum.xda-developers.com/showthread.php?p=27944788
That's the leak you need I guess.
There's just one Problem. You need an patched Boot. Img and the system signed of the necessary GB Rom.
I've not searched this Thread for an boot. Img. Maybe someone posted one.
I'm not sure, if you can flash the European Fastboot Files, to get an working RazR, till there's an solution for you.
Gesendet von meinem XT910 mit Tapatalk 2
Thanks man. I had already side loaded the leak that you had linked to so I was on ics before I tried the arctic. I will try tonight to install the European version. I'll let you know how it goes.
Well I am at my wits end.
I eventually got my phone to reboot back into the Arctic rom I loaded, but can't figure out how to update this rom or load another. I have tried with RSD to flash a different flashboot files, but they all fail. I have down loaded a few different custom roms and loaded them on my sd card and tried updating my phone from external storage through the Android system recovery utility but action is always aborted. I can't load any apps like rom manager, file manager, or anything for that matter. When I go to the play store and look at my apps it says i already have them all installed and can't load any. What can I do?
Well I can't seem to leave well enough well enough. tried a few more things and now the phone won't boot. It gets to the Motorola logo and turns off. So can I can get to fastboot and recovery or off. Brutally expensive paper weight.
Can help
hammily said:
Well I can't seem to leave well enough well enough. tried a few more things and now the phone won't boot. It gets to the Motorola logo and turns off. So can I can get to fastboot and recovery or off. Brutally expensive paper weight.
Click to expand...
Click to collapse
I bricked my Rogers RAZR too and was able to fix it. It's a matter of finding the correct signed img and flashing it using the fastboot (when starting phone press power and hold volume up if I remember correctly). Will check what the name of the image is and get back to you. I flashed three or so different images before it would finally boot, then I was able to re-root it, install CWM and get back on my feet.:good:
The rom I loaded is European from here.
http://forum.xda-developers.com/showthread.php?t=1760702
I have been bricked before and fixed the issue, but after loading this custom rom the flash I used the first time with RSD does not work. I appreciate any help and I am willing to try what ever. I did not impress my wife with this one.
flash this
http://forum.xda-developers.com/archive/index.php/t-1634223.html
then reboot....it will work
Thanks I will try it after I get home from work today.
[TUTORIAL]
1. Download the empty_radio.img
2. Turn off the Razr
3. Power On the Razr and select Fastboot Mode AP
4. Open the command prompt CMD
5. Go to the folder where the radio is empty
6. Make flash the radio with the following command and then type "fastboot reboot"
7. Rest assured I tested on my Razr this command does not erase the radio
8. This command will only restart the fastboot
9. Now then turn off the Razr holding vol - and power
10. Plug the Razr holding vol + vol - and power and have it start normally
11. Now restart the fastboot screen will not show more ...
This stuff is over my head. I don't know how to do steps 4,5,6. I don't know what to do in command prompt, I can't find the folder where the radio is empty, and I don't know how to flash the radio. I am totally lost.
Does any body have any other Ideas?
Have you tried fastboot with rsd lite?
Sent from my DROID RAZR using xda premium
Yes I have tried flashing several different XML files from different ROM's With RSD lite 5.7. The flash always fails. In RSD it says that my phone is connected, but it does not show my IMEI it just has N/A in that box. When I hook up my wife's phone which is totally stock it does show her IMEI. Could this be part of the problem?

[Q] Motorola Razr XT910 BRICK

Hello everyone, this is my second post in the community and as above, I draw you before the serious problem that has my cell phone and that despite the help of all of you still not solved enclose descriptions videos and fails the steps and followed over time. :crying::crying:
All this happened when installing from retail jb rom ics one Chinese, after the installation the cell began to discharge too fast to the point of completely unloaded and not turn over, the next thing was wired switch it could enter the factory and then recovery only restarted.
after the above procedure to unbrick with Unbrick method & switch to 982.124.14.XT910.Retail.en.EU with which obtube not any response, after that a user community graciously offered to assist and I sending the same procedure but with the files for my region (Latam) after that the phone showed the motorola logo and restarted but at times passed motorola logo and showed the animated logo motorola, encendia the lights cell buttons and screen bottom came out "Wait a minute" restarted (enclose one. rar with videos of procedures performed and detailed information.
I count on your help and already thank you very much for reading my topic and I hope to get my phone I need too :crying:
:victorydt: my apologies for the bad drafting but all this is performed with English translator (I'm from chile) :laugh::laugh:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
idwijayaku said:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
Click to expand...
Click to collapse
reaches the motorola dual core logo and restarts :crying::crying:there some method other than by fasboot?, or some solution?
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
idwijayaku said:
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
Click to expand...
Click to collapse
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Esto.Vir said:
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Click to expand...
Click to collapse
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
and tested with the brazil retail rom, fido, rogers ye had the same problem, my question is, if all the rom's the same that another problem will have my phone? , I can enter the ap fastboot recovery and all that d the stock recovery, my phone stayed brick to install a Chinese jb rom this tutorial :
http://www.chileandroid.com/t16992-romxt910jelly-bean-jelly-bean-41-2-china-retail-oficial
, Change kernel and everything that goes in the guide, that will be a problem? I hope you can help me from now thank you very much:crying::crying:

My RAZR XT910 got soft bricked I guess, any help?

Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
maciekk600 said:
Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
Click to expand...
Click to collapse
When you see android with red triangle just press vol- and vol+ and find the option factory reset.
From your post I see that you flashed ICS Fastboot file,right?
Were you on ICS or JB before brick?
Sent from my Razr XT910
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
maciekk600 said:
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
Click to expand...
Click to collapse
The only way is to flash it with RSD Lite.
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB Fastboot files.
Sent from my Razr XT910
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
maciekk600 said:
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
Click to expand...
Click to collapse
Right,with factory cable you can't charge the phone but you can flash fastboot file,that's what it's for.
Sent from my Razr XT910
It worked, thank God. Thanks for the advice, next time I'll be more careful with my RAZR
Greets!
But another problem suddenly appears - my battery won't charge over 40%. Tried turning it off, but it didn't work.
Edit: I have had 50%, now I have 60. It looks like it's going up and changes after 10%. We'll see if it manage to charge up 100% battery.
Edit2: Okay, it fully charged. Thank's again mate for tips

[Q] HELP / PROBLEM - Fastboot Loop and Error flashing with XT910

Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
-Musashi- said:
Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
Click to expand...
Click to collapse
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
I´m from Argentina. And you are totally correct, I downloaded FB files for 4.0.4 , but now I tried running the phone in Safe Mode, went to sys info to take a look at it. And found I have 4.1.2
So question is, from that list you gave me, the "Retail Brazil" should do it? as well as UK retail or any other?? Which one should I chose
Thanks!!!!!!!! a lot
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
Ok so I have made quite a progress here. I was able to get a Brazilian version which is from LATAM and RSD flashed straight like a charm. Now I have the clean new firmware.
And even I can read in the fastboot 0A.77 instead of 0A.74 version
HOWEVER: problem with the Fastboot still persists. Even the phone itself when it restarts goes into Fastboot and when I´m able to make a boot menu I can´t choose anything and it goes directly to Safe Mode.
Now that the system´s """""fixed"""" and I could flash it.... Any tips on taking this off? I cant start the phone in normal mode :S

Pepsi P1S corrupted eMMC?

Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
SOLUTION
I downloaded the flashtool that flashes MTK Devices then searched google for Pepsi p1s needrom and downloaded the original firmware scatter file, turn off the P1S unplug it from USB,...Start the flashtool, and search the firmware will be second search bar select search and browse your computer for the firmware you downloaded from needrom, then you will see it load all the files.....there is a button bar that has an arrow open the arrow and select firmware update, then hit the green go button after you hit the green go button plug in your powered off PEPSI P1S ....it will give you a red bar on the flashtool at bottom first, then it will format your device properly, then install all the necissary files, its real quick about 3 minutes, after a box will pop up on the screen and say OK with a big check mark, at this point you can unplug your phone, power it up and wait about 3 minutes, everything will be normal again. So sorry I would post the links however I forgot my password and username that I was using for many years and forgot my recovery email as well.....so if you google it you can find the stuff, just hope I helped with the proper method of flashing......good luck, let me know how it goes.
Thanks but i know how to flash the firmware with SP Flash Tool. i have flashed the P1S with 3 different roms..but always the same error (freeze and reboot at different points)
Are you using download mode? Or firmware update? The reason I ask is download mode always gave me a bootloop, but when switched to firmware update mode it formats the device correctly and fixes the file structure, try firmware update mode.
Im using "Format All + Download"
Try using firmware update mode, let me know what happens.
same problem...freeze (at different points) ans reboot.
here you can see what happen:
https://www.youtube.com/watch?v=J1oFkgUwtOo
try this! P1
power off
then hold power button + volume down
the boot mode will appear
select recovery
it will show you no command
then pres power button first and the press volume up
now you device is on recovery
then select
wipe data/factory reset.
Blueray88 said:
Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
Click to expand...
Click to collapse
I have noted one thing.
when I update supersu to play store and reboot it goes in bootloop.
so I recommend not to upgrade or even to make unroot just after removing apps with viruses

Categories

Resources