Bricked Noob Nook - Barnes & Noble Nook Tablet

I had my device rooted about a year ago, came back from Afghanistan and it updated and unrooted. Attempted to redo it and looks like i bricked my nook.
Any1 willing to remote in and fix my nook...? i've read just about all the stuff on here and cant figure it out. Thanks to anyone who would be willing to spend a few min and help.

Try the repart.img burned to sd-card.
http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/

fml
So i followed the instructions and get to the point where my **** is bricked... I get the "fail" part of that link listed, so i follow it to the help links below that, but it gets into ADB push and stuff like that... so i google for a hour or 2 on how to do it. Which leads me to my ADB drivers dont work correctly, so i try to fix them for about and hour... and im back to the point where i need some advanced help....
"If you get a Red “X” instead of the checkmark, see the error notice at the bottom of this page for some options."
http://forum.xda-developers.com/showthread.php?t=1513583
https://github.com/succulent/acclaim_recovery_sdcard

bump
Is there anyone willing to help me out with this? Let me know, ty guys

I'd suggest burning a CM10.x pre-made SDcard image (e.g., cm_acclaim_10.1_21APR2013_HD_SDC_IMG.7z from Succulent's repo http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) and see if your NT can successfully boot and run a ROM from SDcard. If it does then you can proceed to restoring stock ROM (or flashing CM10) internally on emmc.
Also, refrain from reformatting any partition (other than possibly /cache, /system, /data, if you have good reason to do so and know what you're doing), as you risk making the problem worse -- see http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.

digixmax said:
I'd suggest burning a CM10.x pre-made SDcard image (e.g., cm_acclaim_10.1_21APR2013_HD_SDC_IMG.7z from Succulent's repo http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) and see if your NT can successfully boot and run a ROM from SDcard. If it does then you can proceed to restoring stock ROM (or flashing CM10) internally on emmc.
Also, refrain from reformatting any partition (other than possibly /cache, /system, /data, if you have good reason to do so and know what you're doing), as you risk making the problem worse -- see http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
Click to expand...
Click to collapse
Much thanks for the attempt. But after trying everything you siad (and following them to dozen of other stuff) still no fix.
Basically i need help to re-write my emmc partions it seems. Is this correct?
I can get it to boot to CWM from a SD card, but no further.

Additional info -
I cant get ADB to work at all, it boots into CWM (CWRM?) where i can apply update.zip and all that stuff, but ADB doesnt list my device (i tried on 2 different computers). Was thinking my drivers were messed up or something, but in device manager it lists my device as a E: and F: (emmc and SD card?) so i dont really know where to go from here.... fml

https://github.com/succulent/acclaim_recovery_sdcard/blob/CM7/README.md
Wasn't a help? Worked like a charm when I hosed my NT.

champ1919 said:
https://github.com/succulent/acclaim_recovery_sdcard/blob/CM7/README.md
Wasn't a help? Worked like a charm when I hosed my NT.
Click to expand...
Click to collapse
Follow the guide for setting up the SD card. Get to the last step:
wait until device boot into recovery.
This never happens, it shows me the "n" and reboots over and over.

dand40 said:
Follow the guide for setting up the SD card. Get to the last step:
wait until device boot into recovery.
This never happens, it shows me the "n" and reboots over and over.
Click to expand...
Click to collapse
Do you have another SD Card to try? I had the same problem getting mine to boot from SD after I updated it to 1.4.3 (ages ago), but trying a different SD Card fixed the issue.
Also, I think the post I have in my signature has instructions that are similar to that other link but might be a bit easier to follow. I wrote them so that a non-technical person should be able to follow them. Nothing against succulent, he does wonderful work.

make sure you take out sdcard before it reboots

i had same porblem. the fix
stillblaze01 said:
make sure you take out sdcard before it reboots
Click to expand...
Click to collapse
i noticed that these new sd boots for recovery don't really work. i had to use the cwm and sd boot stuff from the nook color and worked like a charm. BUT! u have to be very patient and vigilant because depending on the type of usb cord u are using (factory nook usb cable, or generic cable) i may take awhile to boot from sd.
step1- download (https://www.mediafire.com/folder/dd1cwv3uw0u18/NOOK TABLET) <<-----sdboot.zip and cwm.zip
step2-download minitool partition wizzy
step3-put sd card into computer
step4-using minitool, delete partition, create partition (make primary, and fat32), right click on sd card (usually F set flag to active and change partition ID type to 0x0c fat32lba and then click apply. (IN THAT ORDER)
step5-once parted copy from the sdboot attatchment provided to sd card, the recovery.img, MLO,flashing_boot, and u-boot. Also put the cwm emmc.zip provided as well into sdcard.
step6-put sd into nook, MAKE SURE NOOK OFF BEFORE U PUT IT IN OR U WILL HAVE TO DO IT ALL OVER AGAIN, then plug nook into computer via usb cord, be patient and wait for nook to boot, once it finally boots, U MUST BE VERY QUICK AND PRESS "N" THE SECOND CYANOBOOT POPS UP, GO TO SDC RECOVERY NOT INTERNAL RECOVERY. that will load up sd cwm, once it is up it will now let u install the cwm i provided. install it.
step7-once this is done unplug it from comp, turn off, and repeat steps 3-6 (BUT THIS TIME ADD THE CYANOGENMOD 10.+ YOU WANT TO USE IN THE SD CARD AS WELL ALONG WITH THE CORRECT GAPPS) once sd cyanoboot pops up choose internal recovery instead of sdc recovery. install cm10+, gapps, and the internal cwm emmc.zip i gave u as well for good measure.
step8- once done take out sd card and reboot regularly with/without usb doesnt matter. u should be good...........it seems like alot but its actually rly fast when u got the hang of it.
I HOPE THIS HELPS YOU. LMK if my link doesnt work. these sd files are the only ones i found that actually work for me. maybe they work for u

newbtrigger69 said:
step7-once this is done unplug it from comp, turn off, and repeat steps 3-6 (BUT THIS TIME ADD THE CYANOGENMOD 10.+ YOU WANT TO USE IN THE SD CARD AS WELL ALONG WITH THE CORRECT GAPPS) once sd cyanoboot pops up choose internal recovery instead of sdc recovery. install cm10+, gapps, and the internal cwm emmc.zip i gave u as well for good measure.
step8- once done take out sd card and reboot regularly with/without usb doesnt matter. u should be good...........it seems like alot but its actually rly fast when u got the hang of it.
I HOPE THIS HELPS YOU. LMK if my link doesnt work. these sd files are the only ones i found that actually work for me. maybe they work for u
Click to expand...
Click to collapse
Closer than anything i've tried! When i try to choose internal recovery the system just freezes and i cant get it to go any further! I was soooooooo happy then this crushed my dreams lol....
Thank you so much dude, any suggestions to finish this out?
edit:
Added information, after installing the flash emmc provided, it says everything was fine.
Then when i go back to the main CWM menu, i have a error saying:
E:Cant mount /cache/recovery/log
E:Cant Open /cache/recovery/log
E:Cant mount /cache/recovery/last_log
E:Cant Open /cache/recovery/last_log
Dunno if this means anything really, but figured more info is better. Thanks!

dand40 said:
Closer than anything i've tried! When i try to choose internal recovery the system just freezes and i cant get it to go any further! I was soooooooo happy then this crushed my dreams lol....
Thank you so much dude, any suggestions to finish this out?
edit:
Added information, after installing the flash emmc provided, it says everything was fine.
Then when i go back to the main CWM menu, i have a error saying:
E:Cant mount /cache/recovery/log
E:Cant Open /cache/recovery/log
E:Cant mount /cache/recovery/last_log
E:Cant Open /cache/recovery/last_log
Dunno if this means anything really, but figured more info is better. Thanks!
Click to expand...
Click to collapse
that info is crucial actually. and this is what happened.
whatever you did to you nook prior to all this messed up ur internal pertitions. meaning they are all different sizes and such than they should be. maybe u installed something that belonged to another device (not the sdboot that wouldnt do it) more like a wrong cm version or something or even a kernel. whatever the case ur partitions are funky. going to work now but when i get back ill take a look and see if i can find something. i ran into same problem with my nook color a few weeks ago and got it fixed hopefully nook tablet has pretty much the same thing. getting it booted up is good though.will try to give u something later today

newbtrigger69 said:
that info is crucial actually. and this is what happened.
whatever you did to you nook prior to all this messed up ur internal pertitions. meaning they are all different sizes and such than they should be. maybe u installed something that belonged to another device (not the sdboot that wouldnt do it) more like a wrong cm version or something or even a kernel. whatever the case ur partitions are funky. going to work now but when i get back ill take a look and see if i can find something. i ran into same problem with my nook color a few weeks ago and got it fixed hopefully nook tablet has pretty much the same thing. getting it booted up is good though.will try to give u something later today
Click to expand...
Click to collapse
So last night i tried to load from SDC, internal recovery and pretty much any option it would let me. I have no idea what that broke but now when i plug my cable in it will not boot to SD or EMMC.... Take the SD Card out and try to boot and it will goto the "n" screen after about 2 min... then just stay black (im assuming its actually still on)...F M L

i think i got a fix.
dand40 said:
So last night i tried to load from SDC, internal recovery and pretty much any option it would let me. I have no idea what that broke but now when i plug my cable in it will not boot to SD or EMMC.... Take the SD Card out and try to boot and it will goto the "n" screen after about 2 min... then just stay black (im assuming its actually still on)...F M L
Click to expand...
Click to collapse
https://github.com/succulent/acclaim_recovery_sdcard <<<<<-----------------------go here
scroll down to Other flashable Files (Did you messed up your Nook Tablet?) and follow these directions. if ur confused on any of them ASK FOR CLARIFICATION BEFORE U JUMP INTO SOMETHING. this will help u repartition areas 1-6 which is would i did for my nook color and it worked when i ran into this EXACT problem so maybe this will help u. also if ur sdcard stopped booting to cyanoboot where u press "n" to enter cwm recovery, maybe a new one like i listed from sratch, go through all the steps again and jus add the appropriate zip files from succulents recovery tutorial listed above
get back to me asap if u have ANY questions :fingers-crossed:
---->>>IF THIS WORKS ALL CREDIT GOES TO SUCCULENT FOR HIS RECOVERY PROCESS<<<----:highfive:

newbtrigger69 said:
https://github.com/succulent/acclaim_recovery_sdcard <<<<<-----------------------go here
scroll down to Other flashable Files (Did you messed up your Nook Tablet?) and follow these directions. if ur confused on any of them ASK FOR CLARIFICATION BEFORE U JUMP INTO SOMETHING. this will help u repartition areas 1-6 which is would i did for my nook color and it worked when i ran into this EXACT problem so maybe this will help u. also if ur sdcard stopped booting to cyanoboot where u press "n" to enter cwm recovery, maybe a new one like i listed from sratch, go through all the steps again and jus add the appropriate zip files from succulents recovery tutorial listed above
get back to me asap if u have ANY questions :fingers-crossed:
---->>>IF THIS WORKS ALL CREDIT GOES TO SUCCULENT FOR HIS RECOVERY PROCESS<<<----:highfive:
Click to expand...
Click to collapse
ALSO!, i believe it talks about just flashing cm7 based on this 1.4.2 stock flash. 80% sure u may need to update to 1.4.3 stock in order to proceed to flash cm10+ (WHICH IS WUT U WANT) cm7=garbage now that bexus-n kernel has been out and even without it the new cm 10.+ cyanogenmods are pretty sweet.
(if u get it working, word of caution is the 10.2cm stable+ later nightlies have some NT related internal storage problems as of today. so u might want to flash 10.2m1 if u so choose to go past cm7 gingebread) GOOD LUCK! i hope u solve this. because i know this thread would help alot of newbs when troubleshooting.

Related

Fix for bricked nooks from CM7 "formatted sd"

for this fix, you will need to have a CWM sdcard ready and waiting followed by and drivers properly installed for your tablet.
YOU MUST have CWM running from sdcard to fix this issue. Otherwise nothing will happen.
instructions to install to sdcard are here (I suggest using windows)
Needed files for download:
just download this zip and run the script while booted into cwm from sdcard.
download it here.
Instructions: Boot from sd (don't worry, it will work), ensure sdcard is mounted, and then you just run the fix.bat from the computer after extracting.
Credits: Succulent for the xloader image
Fattire for the idea that it might have formatted mmcblk0p1 (which it dead instead of mmc1)
You're welcome.
Might want to add that the cause of the "brick" appears to be that CM7 is confusing mmc1 and mmc0 and instead of wiping the first partition of the SD card, it's presumably wiping the first partition of the emmc, which contains the x-loader.
I already have said it.
Ah okay... well glad everything is fixed now.
fattire said:
You're welcome.
Might want to add that the cause of the "brick" appears to be that CM7 is confusing mmc1 and mmc0 and instead of wiping the first partition of the SD card, it's presumably wiping the first partition of the emmc, which contains the x-loader.
Click to expand...
Click to collapse
Bowing head in shame here...... Rookie mistake!
Looks like we have to make a bit of a tweak to the system then do some testing.
New download link due to a small scripting error.
Need help
Hi Indirect. I see that you have fixed your NT. I did not use sd i did install cm7 internally but i did format all the mounts . And now it just restarts in CWM. What should i do. Any idea please
Well guys, I'm still having problems. I ran the brick fix before you updated it - didn't work. I then re-ran after you updated it - still didn't work. It'll boot to CWM from SD, but won't boot to any ROM. Tried re-installing CM7 (didn't work), then I tried the Nook141root.zip which supposedly installs the BN 1.4.1 from CWM (also didn't work). Tried re-running the brick fix a handful of times after and before installing each ROM with no luck. Then I tried running it without installing a ROM. Tried the brick fix then I tried the BN 1.4.0 restore file. I tried on multiple freshly formatted SD cards and I even tried on a computer I was working on with a fresh install of Win7 with a fresh install of the drivers just to rule that out.
Before all this I had CWM and CM7 installed internally - if that makes a difference. Ideas?
Edit: More info. When trying to wipe data/factory reset in CWM I get the errror "E:format_volume: make_ext4fs failed on /dev/block/mmcblk1p2"...this occurs right after rebooting from the brick fix.
Edit 2: More info yet...in the brick fix I'm getting the text "error: device not found" twice right after entering "y" then again a handful of times later. Is there anything special I have to do in CWM to get it to detect it? I have sdcard mounted...
Im geting this and then my nt restarts by itself and then im back in cwm again so nothing is fixed.
Fatos said:
Im geting this and then my nt restarts by itself and then im back in cwm again so nothing is fixed.
Click to expand...
Click to collapse
What do you have mounted to get it the fix to detect the tablet? Does it matter?
scsione889 said:
What do you have mounted to get it the fix to detect the tablet? Does it matter?
Click to expand...
Click to collapse
Actually with mine it does not matter . I get till the step y or n without mounting nothing. Than i mount the sd card and press y and enter.
Than as u can see does try to write something and than my nook does reboot .
And the ending is the same. So no progress so far.
Fatos said:
Actually with mine it does not matter . I get till the step y or n without mounting nothing. Than i mount the sd card and press y and enter.
Than as u can see does try to write something and than my nook does reboot .
And the ending is the same. So no progress so far.
Click to expand...
Click to collapse
Were you running from internal or SD when it bricked?
Does it boot to CWM on it's own without an sd in the slot? If it does have you tried restoring/flashing a backup?
Reason I say about the backup is I just bricked my own systems on purpose when running from sdcard, it kept gpoing back to CWM after the xloader was returned to it. Restored an original backup and all is well again
CelticWebSolutions said:
Were you running from internal or SD when it bricked?
Does it boot to CWM on it's own without an sd in the slot? If it does have you tried restoring/flashing a backup?
Reason I say about the backup is I just bricked my own systems on purpose when running from sdcard, it kept gpoing back to CWM after the xloader was returned to it. Restored an original backup and all is well again
Click to expand...
Click to collapse
Yes i have had it internally.Not in an sd.
Yes mine doew boot to CWM on its own without and sd in slot. And yes i have tried restoring to re flash back up. Cause i have installed CM7 once and it did run well. But than after installing some programs became slow so i wanted to redo it again. And than i did format all: bootdata, cache, emmc, rom, system,sd-ext.
And then i installet cm7 again and all the installing went well againg . But it just want start cause is missing something in one of the mounts. So what i think is only needed if ill be able to restore the data that is in all those small partitions like emmc. I know that bootdata,and cached gets backed up but i dont know if the orthers are backed up or not.
Thanks for trying to help.
Edit: I have to go to university now. But if it would make it easier for you to help, I can shot a video afterwards with all the steps what i have done and how is my nook behaving now.Just let me know .
Edit1: I did try to restore to stock or update to 1.4.1 but it tells me MD5 mismatch.
Is it possible that i can push in with adb the files that are in the boot data, eMMc and other mounts i mean one by one.
I was running internal when it bricked. Only boots to cwm from SD now.
Sent from my Incredible 2 using XDA App
Fatos said:
Yes i have had it internally.Not in an sd.
Yes mine doew boot to CWM on its own without and sd in slot. And yes i have tried restoring to re flash back up. Cause i have installed CM7 once and it did run well. But than after installing some programs became slow so i wanted to redo it again. And than i did format all: bootdata, cache, emmc, rom, system,sd-ext.
And then i installet cm7 again and all the installing went well againg . But it just want start cause is missing something in one of the mounts. So what i think is only needed if ill be able to restore the data that is in all those small partitions like emmc. I know that bootdata,and cached gets backed up but i dont know if the orthers are backed up or not.
Thanks for trying to help.
Edit: I have to go to university now. But if it would make it easier for you to help, I can shot a video afterwards with all the steps what i have done and how is my nook behaving now.Just let me know .
Edit1: I did try to restore to stock or update to 1.4.1 but it tells me MD5 mismatch.
Is it possible that i can push in with adb the files that are in the boot data, eMMc and other mounts i mean one by one.
Click to expand...
Click to collapse
I'm in the same boat...I think when we did a format of the rom partition, we lost some data that was not backed up...That being said I have done a lot of reading and I think all hope is not lost.
We did not format the "factory" partition which from what I have been reading may contain a backup of the "rom" and other partitions.
I wonder if it is possible to pull the data from the factory partition, extract the data that we need and then push the appropriate files back to where they belong? It's way beyond my expertise, although I do have ADB working and I think if someone could point us in the right direction, it wouldn't be that difficult...I could be completely off base though...Good Luck and If I make any progress I'll make sure I pass the info along.
Need help!
I got the bloody ADB issue.... I was able to boot to CWM from SD card, and it's mounted. BUT! Adb devices gives me nothing, no device. I did all the troubleshooting of the driver, i got the "Android composite ADB interface" device but still no adb device appearing. Please help! My only idea if this fix can be incorporated into a flashable zip. May be there is some other way?
Thanks.
ElectroMike said:
I got the bloody ADB issue.... I was able to boot to CWM from SD card, and it's mounted. BUT! Adb devices gives me nothing, no device. I did all the troubleshooting of the driver, i got the "Android composite ADB interface" device but still no adb device appearing. Please help! My only idea if this fix can be incorporated into a flashable zip. May be there is some other way?
Thanks.
Click to expand...
Click to collapse
That's exactly what I've got. I'm going to spend a little time on fixing that up today. ADB just won't work through CWM for me.
ElectroMike said:
I got the bloody ADB issue.... I was able to boot to CWM from SD card, and it's mounted. BUT! Adb devices gives me nothing, no device. I did all the troubleshooting of the driver, i got the "Android composite ADB interface" device but still no adb device appearing. Please help! My only idea if this fix can be incorporated into a flashable zip. May be there is some other way?
Thanks.
Click to expand...
Click to collapse
I had thought about a flashable zip. I will look shortly and build one
I tried repartitioning my nook and it really bricked it now. It won't boot from SD. Tried a different card and fresh download of CWM. I think it's totally borked.
Edit for clarification: repartitioned from within CWM on SD
Edit2: Tried a 3rd card (first 2 were 32gb, 3rd was 16gb) and it let me back into CWM. ADB still isn't working though.
Edit2 clarification: I only say ADB isn't working because the brick fix says device not found. If I'm wrong please feel free to correct me.
scsione889 said:
I tried repartitioning my nook and it really bricked it now. It won't boot from SD. Tried a different card and fresh download of CWM. I think it's totally borked.
Edit for clarification: repartitioned from within CWM on SD
Edit2: Tried a 3rd card (first 2 were 32gb, 3rd was 16gb) and it let me back into CWM. ADB still isn't working though.
Edit2 clarification: I only say ADB isn't working because the brick fix says device not found. If I'm wrong please feel free to correct me.
Click to expand...
Click to collapse
Mne does not say that but it restarts my nook. But it does not fix it. I think its just some small starting files missing. But im not so good so i cant help it. So im just sitting and watching around internet if there is any fix. It looks that they have had the same problem with NC to start with to.

[Q] format nook tablet? Windows message!

Nook Tablet won't read internal. When plugging in usb message screen from microsoft windows pops up and says You need to format the disk in drive I: before you can use it. Do you want to format it? First thought it was the external card but popped it out. Not the case. I'm on 1.4.0 and running cm7b. I have never updated from 1.4.0. Are there any benefits to updating to 1.4.3? Everything works fine just won't read internal. Before installing I used meghd00t Repartition, Reformat, Restore and Rescue SDcard to go back to stock. (Still rooted apparently). So installed cwm recovery, cm7b and gapps. No problem reading external card just keep getting that jacked up windows message wanting me to format my nook. Thanks for any help or fixes.
If I was you, I wouldn't listen to anything that Windows has to say. Especially about formatting, that would just erase all your data.
What happens when you choose not to format the disk? Nothing at all?
Solar.Plexus said:
If I was you, I wouldn't listen to anything that Windows has to say. Especially about formatting, that would just erase all your data.
What happens when you choose not to format the disk? Nothing at all?
Click to expand...
Click to collapse
Hey Solar.Plexus,
Everything on the tablet works just fine so far. I've been away from it for 3 or 4 months. Seems like this happened to me before when I bricked it. It seems as though something is kicked out of it somewhere. For instance when going back to stock and going thru the whole sign in it won't let me register with b&n. Don't care about b&n so that's not a problem. Just thought that was why I was never able to get updates and still stuck at 1.40. I just bypass it with the volume up and tapping the screen. Would like to be able to run CM9 on eMMC and CM7 from microSD. But if it doesn't show up not sure what to do. Appears as blank drive letters. Oh well! I remember you now solar. Seems that I posted something months back about the benefits to update and old_fart mentioned something about there is a little box called search. It was a good fun banter. Apparently you got a kick out of it if I remember right. So help me out here please. Are you on 1.4.3?
Appreciate your input my friend.
I actually haven't used stock ROM for a really long time. I currently have CM9 on eMMC and different SD cards with ROMs to use. Let me know what exact dual boot setup you'd like to use and we'll see if we can get it to work out for you.
Who knows, flashing the new ROM might fix the unreadable problem. Regardless, you could probably still use ADB to transfer files to and from your /mnt/media partition.
Sent from my Slider SL101
Solar.Plexus said:
I actually haven't used stock ROM for a really long time. I currently have CM9 on eMMC and different SD cards with ROMs to use. Let me know what exact dual boot setup you'd like to use and we'll see if we can get it to work out for you.
Who knows, flashing the new ROM might fix the unreadable problem. Regardless, you could probably still use ADB to transfer files to and from your /mnt/media partition.
Sent from my Slider SL101
Click to expand...
Click to collapse
Sounds like a solid dog deal to me!
Let's try your setup for kicks and see if I can follow along. Not real familiar with Cyanoboot but I know how to push buttons. ADB knowledge a bit limited but somehow manage to figure it out eventually. I'll try not to have too many senior moments with you. I'm ready to crack this puppy open.
Dragging right now so catch up with you later.
Thanks major dude!
Since you already have CWM recovery flashed internally, all you have to do is flash the CM9 ROM and gApps from this post right here to set up your eMMC ROM.
Then to make your CM7 SD ROM, follow the directions under the SD VERSION IMAGE section of this post right here.
After that, you can modify the SD card to use CyanoBoot, the 2nd bootloader. So do this:
1.) Download the CyanoBoot file from this post right here.
2.) Navigate to the first partition (boot partition) of the CM7 SD card you have made.
3.) Replace the old flashing_boot.img with the new flashing_boot.img file you just downloaded.
4.) Done.
Now, anytime you boot up from a completely off state, your NT should* boot from the SD card and go to CyanoBoot, where you can choose which ROM you want to boot into.
*You might need to plug your NT into a wall charger in order to get it to boot from the SD card. Only some NTs require this.

Nook Tablet with Cyanoboot will not boot.

Hello, I recently received a Nook Tablet with a major problem. It won't boot up. The best I can do is to get it to the TWRP menu. If I try to go past that it just goes to a black screen and I have to restart the device. I've tried looking online for a fix but came up empty. I would either like to restore the Nook to factory settings or restore the CyanogenMod OS. The TWRP screen says v2.1.4. When I go into the install menu I have two options cm-7-TEAM-B-BETA1-signed.zip and Gaps_and_root.zip. If anyone can help it would be greatly appreciated.
Thank you, -Rob
More info please!
Is this new or a used device that you are trying to do something with? If so, what?
The CM7 leads me to believe it's a used one since CM10 is the ROM of choice at the moment for most.
What have you actually done, if anything, beside trying to boot?
I would suggest you browse through some topics here, because I'm pretty sure spending a little time will provide with several suggestions how to move forward.
asawi said:
More info please!
Is this new or a used device that you are trying to do something with? If so, what?
The CM7 leads me to believe it's a used one since CM10 is the ROM of choice at the moment for most.
What have you actually done, if anything, beside trying to boot?
I would suggest you browse through some topics here, because I'm pretty sure spending a little time will provide with several suggestions how to move forward.
Click to expand...
Click to collapse
It is used and has an 8gb flash card. When I originally got it I was able to get it to boot but I couldn't download any Apps because the Google Play wouldn't work and it gave a message "OTA Updater has stopped working". I've spent hours looking for a way to get it back to factory or to try and get it to work properly and have had no luck. Now I can't get it to boot up. I tried the Internal eMMC recovery option but it doesn't seem to be working. Could the MOUNT options be a problem? Currently "Unmount Cache", "Unmount Internal Storage", and "Using internal storage" is selected. I just want to get this tablet to work properly so I can download apps and use the Android OS as it was intended.
If I was you I would start over again with a "fresh" Tablet and do a completely new install. But that's me... I've given suggestions how to do that in several similar topics in this very forum. As I said, read the forum! I see several topic headlines that SHOULD catch your attention on this very forum page list!
Flipskater0005 said:
...
I just want to get this tablet to work properly so I can download apps and use the Android OS as it was intended.
Click to expand...
Click to collapse
If you want to go back to stock, there are info and tools at: https://github.com/succulent/acclaim_recovery_sdcard
If you want to go full android CM10, consider http://forum.xda-developers.com/showthread.php?t=2056626
digixmax said:
If you want to go back to stock, there are info and tools at: https://github.com/succulent/acclaim_recovery_sdcard
If you want to go full android CM10, consider http://forum.xda-developers.com/showthread.php?t=2056626
Click to expand...
Click to collapse
I tried the acclaim restore per this link http://forum.xda-developers.com/showthread.php?t=1402190 . It involved copying the .zip file to my SD and inserting it into the Nook. When I turned it on it was supposed to begin restoring the Nook to the factory OS. When I did it, the Cyanoboot went into "Loading recovery from eMMC". Not sure if it's not booting from the SD or not but I tried the usb to PC method.
I also attempted the AlbertWertz SD Root card, but when I try to write the .img file to my SD it said that there was insufficient space on disk. And I tried it with a 8gb and 16gb SD.
I then tried the do the CM10 install here http://forum.xda-developers.com/showthread.php?t=2056626 . But my computer doesn't give me the option to format my SD w/ a partition.
I also tried to hold the Power+N 8x and it just goes back into the Cyanoboot menu.
I can't seem to find anyone with my exact problem. NT wont boot into OS, and no matter what I do it goes into the Cyanoboot menu.
Try the burning the "repart.img" in the topic I link to at the end of this post to an sd-card and boot into it. Unless you've managed to destroy some partition on the device in your attempts (and it doesn't sound as you've made enough progress to actually do that - sometimes lack of progress is good) . It's fully automatic and takes you back out of the box stock 1.4.0 (as I have told in several other topics the last few days).
Using this is far sefer than fiddling with CWM and what have you if you're not sure what you're doing!
Link: http://forum.xda-developers.com/showthread.php?t=1663836
Digested version: Find the repart.img and burn it to and sd card. 1 GB will do
Flipskater0005 said:
...
I then tried the do the CM10 install here http://forum.xda-developers.com/showthread.php?t=2056626 . But my computer doesn't give me the option to format my SD w/ a partition.
...
Click to expand...
Click to collapse
Assuming you have a Windows PC/laptop, you can download and use this free disk partition tool: http://www.partitionwizard.com/free-partition-manager.html (just be careful apply it to the SD drive and not your PC/laptop hard drive).

[Q] How do I access CWM again?

Last night I rooted my wife's nt from here: http://forum.xda-developers.com/showthread.php?t=2037368 Got my brown box, went to CWM installed .img worked like a charm. When it came time to install CM7 then CM10 I kept getting "no files found" which then I realized I still hadn't checked the "USB debugging" or "allow unknown sources" because it was still hidden (I'm assuming it's because of the 1.4.3 update. So I just reboot nook without CM so I could go to my hidden settings. Checked the appropriate boxes, downloaded goo manager and tried to install them through goo manager... no dice. It just keeps booting with the "n" flash and doesn't show me the awsomeness that is CM animation.
I have 2 SD cards I am using (2gb scan disk I used for the .img) and an 8gb scan disk (that one has an HC on it). I tried the 8gb and it wasn't working so I tried the 2gb which I think was a mistake now because I reformatted it. (you'll see why in a minute.)
Neither of the SD cards were working so I was trying to access CWM through goo manager, by rebooting into recovery... again no dice So then I thought to myself, "well why not just rewrite .img to the 2gb and hard boot that way... well after I initially wiped it to put the ROM and gapps EVERYTIME I try to write the .img on the 2gb I get "file size is too big" I re partitioned the SD just like before and it will not write because file is too big. So I said "okay maybe I'm doing something wrong, but I have a huge 8gb I can use"... same thing, file is too big.
Where did I go wrong? I am thinking that maybe I don't have the most current CWM I think it's 5.0.3.x don't quote me. Did I corrupt my 2 SD cards? It was very difficult to find a .img that didn't have a broken link does that have anything to do with it? Any help would be great!
I want to root and install everything internally so I don't have nook anymore can I get there from where I'm at, or do I have to reboot to stock and start over again. I hope I didn't destroy the two SD cards I have. Thanks for any and every bit of imput you guys!
I would suggest you start over again and here is really easy way to do it:
1. Download, extract and burn this ready-made CM10 sd image to a 2 GB (?) (or larger - not 100% sure of the size since I use a larger card myself) sd card. Use this card as a bootable CWM card. Even if it's a complete run-able CM10 it also works as a bootable CWM! Very handy!
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/ t's a big download, but it's a more or less fool proof way of doing it! If I remember correctly there is actually room enough to put CM10 and GApps on the card. At least the one I use.
2. Boot into the recocvery of that card by pressing the "n" right after the power button and then hold the "n" to get to boot menu
3. In boot menu choose "sd recovery" ot something similar. This will take you to CWM
4. When in CWM install zips, wipe cache and Dalvik and you should be fine!
Once CM10 is installed it probably comes with CWM (the one I use does), so to get into CWM next time you need it, just hold "n" like before, but no need for a CWM card.
Edit: I checked, and there IS enough room for my favourite ROM and gApps on the boot section of the card. "My favourite" is the 1231 build on Iamafanof site. I have tried more recent ones, but I always go back to this one. Just my opinion of course! http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
shiftmyevo4g said:
...
I want to root and install everything internally so I don't have nook anymore can I get there from where I'm at ...
Click to expand...
Click to collapse
To flash CM10.1 internally, see http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123 for some pointers.
digimax: am I writing anything to the SD card, or just drag and dropping files? I tried the drag and drop but I don't get the cyanoboot it just boots to nook. So I extracted the boot.zip and only drag and dropped the 3 files from the boot.zip and still just boots to nook. I know it''s simple (it was the first time I rooted my ole shift evo).
The process I describe installs everything internally and is the easiest way to do it. Like I say: almost fool proof.
Sent from my BNTV600 using Tapatalk 2
asawi said:
The process I describe installs everything internally and is the easiest way to do it. Like I say: almost fool proof.
Sent from my BNTV600 using Tapatalk 2
Click to expand...
Click to collapse
Haha, I like the "almost". Got it working and rooted! Thanks for all the help!:good:
shiftmyevo4g said:
Haha, I like the "almost". Got it working and rooted! Thanks for all the help!:good:
Click to expand...
Click to collapse
LOL! There's no such thing as 100% fool proof! Glad you got it sorted!
bawls wrong thread

Bricked bad

Hi I was running jellybean on my NT and it was awesome.After an update I got the E cant load message long story short. My OS is gone I have tried Adams method I tried Meg's method. I followed Ray Waldo and. Veronica . By the way thank all of you guys for your hard work. Nothing has worked. It is not the first time I have rooted a device I read and read and try to follow directions. I have screwed up my NT .Is there anyway to get a remote session with someone that can help me
Sent from my LG-MS770 using xda app-developers app
stillblaze01 said:
Hi I was running jellybean on my NT and it was awesome.After an update I got the E cant load message long story short. My OS is gone I have tried Adams method I tried Meg's method. I followed Ray Waldo and. Veronica . By the way thank all of you guys for your hard work. Nothing has worked. It is not the first time I have rooted a device I read and read and try to follow directions. I have screwed up my NT .Is there anyway to get a remote session with someone that can help me
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=1605664
I will check it out
sagirfahmid3 said:
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=1605664
Click to expand...
Click to collapse
Have not been online in a minute But I am going to check it out right now Thank you!
done that.
Yea I tried that I must have been doing it wrong though I would get everything built but it would be in my micro sdcard not on my nook. I am sure I am doing something wrong just cant figure out what. Anyway thanx for the thread!!!!
To get help, you need to provide more info: e.g., what error condition/message you got when trying out the various fixes.
More specific....
digixmax said:
To get help, you need to provide more info: e.g., what error condition/message you got when trying out the various fixes.
Click to expand...
Click to collapse
First thanks for taking time to read my post. How I got in my position, cant tell ya . I should of done more research but to tell you the truth I was in love with my crazy cool Nook Tablet running JB and I got careless. Adams Ubuntu sd card it would load a lit black screen and no more left it overnight, nothing .Megd repart .img I would get the red X as soon as it popped up. I never created did the windows version when I tried parted I never got the error just some messed up version of what used to be a partition I had use of adb when in cwm recovery no serial # just 00 Icant mount anything followed Veronicas threads got Ubuntu on virtual box I would be able to do some steps and then I would not be able to load something like sdcard . I thought I had gotten lucky when I found the recovery .img with the tools already loaded. By The way THANK YOU soooo much for taking the time to make cool @SS stuff and let us play!! well I tried loading scripts to sdcard mounts and what not was not getting any thing out of my sdcard. I did the steps were you erase the partitions then remake everything my partitions looked sweet when I reboot nothing sdcard has the partitions and I ast thing I did was used the step to erase that was a few weeks ago I had given up on it .then as a long shot decided to pm Veronica and ask for some help. started trying stuff again loaded cyanoboot from there loaded twrp for some reason I lost my adb I cant load drivers but I can LOad some .img files from cyanoboot so my partitions and mounts are gone adb not working (but I can fix that )I have a sixteen gb nook tablet 1.4.3 rooted with nook and zergy. Is their a rom that I can load from cyanoboots boot menu that will fix everything. wishful thinking
look what i found
I don't know if this helps but I did a cwm back up brfore getting bricked and then I copied my sdcard to my gf's pc I forgot all about it she pointed it out
stillblaze01 said:
...
I did the steps were you erase the partitions then remake everything my partitions looked sweet when I reboot nothing
...
Click to expand...
Click to collapse
If you erased (without first backing up) the 2 partitions /rom and /factory then you have wiped out your NT's factory-installed individual device data (MAC address, security encryption keys, serial no., etc.) without which the NT will not function. The backup made using CWM only covers the 4 partitions /boot, /recovery, /system, and /data, so you won't be able to restore this data using CWM backup. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info.
So trash it.?
digixmax said:
If you erased (without first backing up) the 2 partitions /rom and /factory then you have wiped out your NT's factory-installed individual device data (MAC address, security encryption keys, serial no., etc.) without which the NT will not function. The backup made using CWM only covers the 4 partitions /boot, /recovery, /system, and /data, so you won't be able to restore this data using CWM backup. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info.
Click to expand...
Click to collapse
Ok so no Nandroid to the rescue I have the serial# with the original paper work ,mac address I should be able to get from my routers history I am grasping at straws here ! I would hate to throw away it was my source of entertainment .I let my daughter use my laptop. work is slow and I cant afford to get another one. well can it be turned into something else another model tablet a game emulator
Any way I appreciate you getting back to me if its trashed its my fault for not asking for help before I was trying to use what the devs had in the forum and not be the noob that gets told to do a better search. lol. Hopefully I will get some good news. If not well thank all of you
If you have an SD card on hand I'd suggest that you first burn a SD image of Succulent's CM10.1 (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) or CM10.2 (http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/) and see if your NT would boot and run CM off SD card.
If it does boot and run off SD then the device data is probably intact and you can proceed to flash stock or CM internally (or simply just continue to run CM off SD).
If it doesn't I'd suggest you contact @AdamOutler for help with restoring a copy of romdata.zip to your NT's /factory partition.
digixmax said:
If you have an SD card on hand I'd suggest that you first burn a SD image of Succulent's CM10.1 (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) or CM10.2 (http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/) and see if your NT would boot and run CM off SD card.
If it does boot and run off SD then the device data is probably intact and you can proceed to flash stock or CM internally (or simply just continue to run CM off SD).
If it doesn't I'd suggest you contact @AdamOutler for help with restoring a copy of romdata.zip to your NT's /factory partition.
Click to expand...
Click to collapse
Well I have not been able to t get far this route but here it goes
result
stillblaze01 said:
Well I have not been able to t get far this route but here it goes
Click to expand...
Click to collapse
ok the only thing I have been able to get to work have been recoveries. tried to boot Cm 10.2 sdcard you recommended the sd card did not boot so I used one that loads up CYANOBOOT went into boot menu took that sd card out put in the rom sd go into boot. My nook tablet's screen went black lit internally. Is it loading rom? or am I SOL?
When you boot up the CM10 SDcard it should boot into Cyanoboot which in turn should load SD CM10 ROM (and should indicate that it's "loading SDC ..."), then the screen should black out for up to about 3 min before boot-animation (counter-rotating CM circles) appears.
If Cyanoboot does not appear then the SD card is not bootable (see Notes section of http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1 for some potential causes). Also you might have to boot the NT from its power off by inserting a powered USB cable.
If Cyanoboot loads SDC ROM but the screen goes dark for over 5 min then the CM10 boot has failed.
Tried and tried no luck
Thank you for your time
Sent from my LG-MS770 using xda app-developers app
replaced nook
digixmax said:
When you boot up the CM10 SDcard it should boot into Cyanoboot which in turn should load SD CM10 ROM (and should indicate that it's "loading SDC ..."), then the screen should black out for up to about 3 min before boot-animation (counter-rotating CM circles) appears.
If Cyanoboot does not appear then the SD card is not bootable (see Notes section of http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1 for some potential causes). Also you might have to boot the NT from its power off by inserting a powered USB cable.
If Cyanoboot loads SDC ROM but the screen goes dark for over 5 min then the CM10 boot has failed.
Click to expand...
Click to collapse
hey wantd to thank you for the help you provided, my old nook was possesed wound up breaking charging port frying the battery lol total dissaster... believe it or not all my devices are rooted and rommed that nook just got away from me. long story short bought the same model 1.4.3 16 gb off of craigslist for $ 40 had iy running cm7 10 minutes after i got it home ran for a day installed Succulents cm 10.0 then downloaded cm 10.1.3 from cyanogenmod had to flash gapps twice besides adb being offline everything is groovy!I am not sure if its repartitioned rite I have 5.50 gb internal 7.45.45gb internal my big microsdc are all corrupt so im using a 2gb (work is slow so gonna have to wait for a 16gb). Is there anything cool I can add mods kernel;to make it even better shoot me a message or reply if anything comes to mind

Categories

Resources