Odin back to stock failed...cant get to download mode!!! - Vibrant Q&A, Help & Troubleshooting

I was in download mode and attempted to odin back to stock and it failed. see screenshot attached. Now my phone is stuck on the little cell phone and computer symbol connected by a triangle in between. its the same as shown in this video.. .Now I cant get it to download mode...
Any help would be appreciated... .

phone is stuck at the symbol shown in the start of this video
http://www.youtube.com/watch?v=9nMCBbdAcHU

Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?

wkenworthy10 said:
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
Click to expand...
Click to collapse
So I used another computer this time....still had that computer and cell phone icons on the screen...but as you said ...i just opened AIO tool and used odin to flash it to stock..it worked this time...and once done... i checked the phone which was working and quickly rooted and installed a FROYO custom rom.
thanks again

stuck at samsung vibrant screen after flashing with odin
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss

jonna19 said:
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
Click to expand...
Click to collapse
Use this to go to download mode and flash with Odin again.
http://forum.xda-developers.com/showthread.php?p=48458994
Sent from my SGH-T959 using xda app-developers app

Related

[Q] Galaxy I9100 bricked - Request help

Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium

[Q] How to unbrick samsung galaxy s2

Having recently installed a miui rom, i found that my phone has become brocked. I can go to dwonload mode, and I can turn it on but there is only a blank screen. Does anyone know how to unbrick it?
Thanks
go into download mode open up ODIN and flash a stock ROM. Simple as that.
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
nikkox988 said:
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
He said he can access Download mode which means he can flash a stock ROM and all will be good.
I can't seem to go into recovery mode
thealmightysaj said:
I can't seem to go into recovery mode
Click to expand...
Click to collapse
to get recovery get into download mode open Odin and flash CF-Root Kernel and then try to get into download mode that way.
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
thealmightysaj said:
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
Click to expand...
Click to collapse
are you flashing it through PDA? Just checking I didnt on accident once. Also try just flashing a stock ROM.
http://forum.xda-developers.com/showthread.php?t=1224423
onli flashing pda wont work i thinkk... you may need to repartition
go to http://androidflip.com/android-2-3-4-gingerbread-xxkg3-firmware-update-for-samsung-galaxy-s2/
flash it by repartitioning
download the package in it. it worked for me
Where can I find the stock ROM for a Bell Samsung GS2?
try samfirmware.com
they have all of the official released firmwares based on geographical region.
or
http://forum.xda-developers.com/showthread.php?t=1075278
I have unbricked my phone but i can't access the android market, everytime time i open up the app it closes
my t-mobile galaxy s2 is dead after ICS upgrade failed
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
If you can't get into download mode (home/power/volume down), only thing you can try before you send it back to Samsung or get it JTAG repaired is a jig, which unfortunately is unlikely to work. Still worth a try tho.
hbarri said:
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
Click to expand...
Click to collapse
Try uploading a stock kernel first, then try uploading the rom
Do we have to have a jig?
Help me fix my fully bricked i9100
I have flashed the wrong Roms and firmwares in my Samsung galaxy s2 i9100 for several times now my phone doesnt go to the recovery mode. It only goes to the download mode but re flashing the correct new roms and firmwares, nothing actually works! I tried those
Odin shows only FAIL !! when I flash new roms..I ve tried so many roms so far but it only fails
what do I do now??
Try http://sammobile.com for the firmware.
Sent from my GT-I9100 using Tapatalk 2
Samsung Galaxy S2 SPH-D710
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
XraidedX2 said:
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your sock rom again using samfirmware.com
6.Done

[Q] Phone is bricked.

Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Remove then insert battery. Then try holding volume down and home button while holding power button. Will it go to download mode? If yes, read hubix's tutorial in the development subforum it's a sticky thread.
praisegod1 said:
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Click to expand...
Click to collapse
Next time , use ODIN for flashing firmware . Kies was NEVER EVER reliable .
go to recovery mode perform a factory reset/data wipe that should fix it
Please use ODIN and flash with the one-package file from samfirmware. I did the same when Kies bricked my phone too while upgrading to Gingerbread. It works!
er.davinder said:
go to recovery mode perform a factory reset/data wipe that should fix it
Click to expand...
Click to collapse
Nope, there is no recovery mode accessible either when Kies bricks your phone. Happened to me so. Just a stupid screen with a computer and phone icon with <!> in between them. But anyway my suggestion above of using ODIN should help him out. =)
I am just sharing my experience and hope it helps.
DISCLAIMER: I am not responsible for bricking any phone and/or pc. I am not responsible for any phone or pc damage done by my message here. You are responsible for your own pc and phone. You are responsible for taking risk of upgrading your phone or pc. I just shared my experience in hope if it helps someone.
I had bricked my phone once where I could just see black screen and after some tries white screen and nothing. I removed SD Card and SIM Card and kept it aside. I then removed battery and tried putting phone in download mode. It still did not work then I waited 4-5 min and then inserted battery again. Then I tried putting phone in download mode and it successfully gone in download mode. Then my phone was not getting recognized thru USB cable for ODIN. I changed USB port still same issue then restarted my PC and then I connected phone to USB port and finally got Froyo installed again on my Galaxy Ace thru ODIN.
My phone is bricked
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
buisness_life said:
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
Click to expand...
Click to collapse
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
EmoBoiix3 said:
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
Click to expand...
Click to collapse
boot animation

Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion

Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100

SGS 2 stucked at yellow triangle.

Hello,
After flashing my Galaxy S2 i9100G with clockwork recovery mode, it stucked at "yellow triangle" at startup screen and nothing happens. I m unable to star in downloading or recovery mode.
Can anyone please help me to get ridout of this ?
Thanks,
Pratik
pratikkagda said:
Hello,
After flashing my Galaxy S2 i9100G with clockwork recovery mode, it stucked at "yellow triangle" at startup screen and nothing happens. I m unable to star in downloading or recovery mode.
Can anyone please help me to get ridout of this ?
Thanks,
Pratik
Click to expand...
Click to collapse
Sometimes download mode can work even if the screen isn't turning on. You should follow the instructions for download mode and see if Odin recognizes your phone.
if see odin has recognized ur fone, flash it with the stock firmware using odin!
Thanks for the response but I tried several times but phone is not booting up in downloading mode.
Sent from my GT-N7100
Try this (it may or may not work)
Launch PC Odin & get rom ready (I recommend LiteningRom [NB, it is custom rom that can be flashed via Odin]
turn ph off & remove battery...
plug ph into pc (NB, battery still out...)
**now you may need extra set of hands here (I managed it by myself though)**
now, hold the button combo to get ph in to d/l mode...
keeping the d/l button combo depressed... put battery back into ph...
hopefully ph will show d/l mode ready on screen & it will be seen by Odin :fingers-crossed:
(if above worked) flash Litening Rom & count your lucky stars...
NB, this saved me when my S2 had BSOD.... i.e. nothing showed on screen after flashing a recommended kernel (by a more experienced user/member - not the OP)
always read up before doing anything kernel/recovery related
Try USB jig.

Categories

Resources