hi guys.
i have galaxy s2 gt19100 , and last i tried CM11 4.4.it worked fine but after booting the rom not working correctly nothing displays after that i came ack to recovery mode to install or restore my stock rom ut when i choosed "install ZIP from sd card" there are two directries which is as under
o and obb but both are vacant.then i tried to flasf with odin but odin does not recognized my phone.i tried deffernt caples and laptops usb drivers but result was same
i know XDA is the best forum and hope for a solution for my problem.yhanks and sorry for my english.....
Same as every other 'I have problems with Odin' thread; search for Hopper8's 'Odin troubleshooting' thread, try the stuff in the thread (all of it if necessary).
Related
Hi Guys;
I need help with a flash of SG Ace S5830, the stock rom was Spanish Vodafone Gingerbread, I don`t remember exactly what it was.
I followed the instrucctions to flash with Odin V4.38 the last rom of samfirmware: XENKP7 but when the cell was restarted it showed me : Can't acess /system/csc/LUX,
When the phone started, I connected it by usb but when I tried to disconnect the debug mode this went back to on. The drivers were installed correctly but when I tried to access to the unit this hadn't format.
I checked the storage and my cell only recognized the internal memory, not the SD.
I was looking for information in the forum and the network and I didn't found any. I don't know what the problem with the csc is.
Please could you help me?
Thanks
You need the LUX CSC. Try following instructions on the thread on multi-csc in the development subforum. That may help you.
Hello Consegregate,
I was read the post of multi-csc but I don't know exactly what CSC I have to download,
I try to flash with the same as version of firmware, please could you say me what and wher CSC I have to download to EU?
Thanks
I have a Galaxy S2 here, basically all I did was took the unrooted (probably my problem) phone and opened Odin, then proceeded to use the PDA file provided and pressed start. It got stuck while being downloaded onto the phone so I gave up any unplugged it. After turning back on recovery came up but it said it couldnt mount my sd card. I rebooted again and now all it does is goes into download mode (unseeable to odin) or shows the boot screen with yellow triangle at bottom. How can i fix my phone?
I can get my phone into download mode aswell as into CWM-based Recovery v5.5.0.4, but i get the error
E:Unable to write to ums lunfile (no such file...)
Instructions followed for use of Odin ???
Kies/Usb drivers etc etc .
jje
Try changing USB slot. Also did you make a backup with CWM? Have you tried a restore?
I did not make a backup, and yes.. i tried the drivers, samsung kies, and a new usb and such.. no luck
JJEgan said:
Instructions followed for use of Odin ???
Kies/Usb drivers etc etc .
jje
Click to expand...
Click to collapse
totally agree seems this month been increase of noobs lol cannot read/search
least he didint flash cm9 then ask why he doesnt have a windows boot screen still waiting for that to be asked hahaha
******************
to start with you should of done your research
and now u open a thread with ohhh my phone is fuk*d i have a galaxy s2 thats great so do i to which model do you have is it a G for example what was the firmware you was trying to flash have you read and understood the install notes listed for that rom have you looked at FAQ for that listed rom
this is a dev forum not please fix my fuk`d fone
sorry if this saids abusive not intended just stating a fact give more info we may provide the help needed
Hi All
I have one Samsung i9100, it only can boot to "download mode" I try to use odin to flash the samsung official rom , but it doesn't successful
(please see the image of attachment is the error prt scr)
I confirm all of the tar file can unzip
I already install the updated Kies download from Samsung
I try to do this on Win 7(32 & 64 bit) and Win XP
I put it on the on-board USB port and exchange 4 micro USB cable from Nokia ,Moto ,Sony, and Blackberry)
any one can help me
million thanks
Find Hopper8's 'Odin troubleshooting' thread stickied in the General section & try the stuff in that thread as many times as you need to in order to get a successful flash. If you actually do that (as opposed to the 95% of people on here who say they do but don't because they're lazy & looking for an easy fix where there isn't one), you'll fix your phone fairly easily.
You should be trying other firmwares like ics/jb.
on_1437 said:
Hi All
I have one Samsung i9100, it only can boot to "download mode" I try to use odin to flash the samsung official rom , but it doesn't successful
(please see the image of attachment is the error prt scr)
I confirm all of the tar file can unzip
I already install the updated Kies download from Samsung
I try to do this on Win 7(32 & 64 bit) and Win XP
I put it on the on-board USB port and exchange 4 micro USB cable from Nokia ,Moto ,Sony, and Blackberry)
any one can help me
million thanks
Click to expand...
Click to collapse
Samsung kies is not the only thing you will need 2 download. you also need to install SAMSUNG_USB_Driver_for_Mobile_Phones. it is available on the samsung website.
Hello everyone!
I tried to Upgrade this S2 i9100 phone from android 2.3 to 4.1.2. I used ODIN 1.87 and I9100XWMS3 ROM. when I started ODIN to flash the ROM it stucked in connecting or something like that for a long time, so i unplugged the cable and removed the battery. after that I can't turn on the phone, or go to Download/Recovery mode and anything I do just the first picture appears.
So is it Bricked or something?
is there any soulution?
when plug it to pc and open ODIN, it recognizes the phone. and when I try to flash the ROM it fails (like the second picture).
Probably not bricked; that picture of the phone/PC on the screen means the phone is in forced download mode. One way or another you need to get a successful Odin flash, and the way you do that is find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps in a methodical way as many times as you need to until you do get a successful flash.
MistahBungle said:
Probably not bricked; that picture of the phone/PC on the screen means the phone is in forced download mode. One way or another you need to get a successful Odin flash, and the way you do that is find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps in a methodical way as many times as you need to until you do get a successful flash.
Click to expand...
Click to collapse
Thanks man. I was freaked out, because it's someone else's phone. when you said it's a forced download mode, I thought there must be some way. and I've found the solution here:
http://forum.xda-developers.com/galaxy-s2/general/repair-i9100g-samsung-galaxy-s2-flashed-t1448765
I just thought that the Phone was a i9100 like my old one, but it turned out to be a i9100G. So originally a wrong firmware caused the problem. and the pit file in that topic solved it.
Thanks again man.
Good work figuring out what caused the problem & doing the research/fixing yourself
s5839i bootloop
hello !! so i have a problem. my samsung galaxy ace s5839i it's a bootloop!! first thing i tried was to wipe cache and because that didn't work i wiped also all data!! but still nothing. after that i searched and found that i need to reinstall the firmware . i had some problems going in the download menu , but i manage to get there. now the problem is that odin doesn't recognize it because also my computer doesn't or at least i think that is the reason odin doesn't see it!!! i've also downloaded and installed kies and usb samsung driver but still nothing!!
any idea on what i can do about this?! about how to make my computer and odin to see the phone? or another solution on how to escape from this bootloop?!
thx!
cristitache89 said:
hello !! so i have a problem. my samsung galaxy ace s5839i it's a bootloop!! first thing i tried was to wipe cache and because that didn't work i wiped also all data!! but still nothing. after that i searched and found that i need to reinstall the firmware . i had some problems going in the download menu , but i manage to get there. now the problem is that odin doesn't recognize it because also my computer doesn't or at least i think that is the reason odin doesn't see it!!! i've also downloaded and installed kies and usb samsung driver but still nothing!!
any idea on what i can do about this?! about how to make my computer and odin to see the phone? or another solution on how to escape from this bootloop?!
thx!
Click to expand...
Click to collapse
so now finaly made the computer see my phone but came another problem!!
so i used odin to try to reinstall the firmware , i found pit totoro_0623, some vodafone stock firmware for the pda, modem and csc and for the bootloader i could not find !!so i hit start , working ok finishing the job and after the phone restarted but it is stuck in appling multi csc and nothing is happening!! any idea ? what i can do?
so i finaly i succeeded to install the firmware by using odin 3.07 and S5839IXXLK3_S5839ILPMLL1_LPM in the PDA button , only this!!! but now it is stuck on the "samsung galaxy ace gt-s5839i " screen and nothing is happening . i'll keep it for another 30 min to see if something is happening !! is you have any idea , please reply!!!