Hi,
I have a problem with my X10 Mini Pro (U20i) after installing recovery (CWM) following the guide ( http://forum.xda-developers.com/showthread.php?t=950324 ) without any mistakes, when I try to go to recovery mode, pushing many times or hold on back key, this doesn't work.
Model: Sony Ericsson Xperia x10 Mini Pro (U20i)
ROM: STOCK 2.1.1.A.0.6
KERNEL: STOCK 2.6.29 [email protected] #1
ROOTED: yes
Bump
Kaylas said:
Bump
Click to expand...
Click to collapse
Re-flash your recovery(CWM) and try again
Kaylas said:
Hi,
I have a problem with my X10 Mini Pro (U20i) after installing recovery (CWM) following the guide ( http://forum.xda-developers.com/showthread.php?t=950324 ) without any mistakes, when I try to go to recovery mode, pushing many times or hold on back key, this doesn't work.
Model: Sony Ericsson Xperia x10 Mini Pro (U20i)
ROM: STOCK 2.1.1.A.0.6
KERNEL: STOCK 2.6.29 [email protected] #1
ROOTED: yes
Click to expand...
Click to collapse
Try this tut..its fully working...i flashed CWM using this http://forum.xda-developers.com/showthread.php?t=1257701 all d best mate:good:
Related
Does anyone have backup ROM generic 2.1 Eclair from SE before start install Custom ROM ??
I need that before I sell my phone...
I have it, created by xRecovery, but are you sure it will be work on yours... ??
I want to upload it but my internet connection is sucks, ....
I have nowhere to go...
for the sake of all developers bro...
here is stock 2.1 with root:
http://forum.xda-developers.com/showthread.php?p=16800433
if you need an untouched system use official seus software from:
http://www.sonyericsson.com/cws/support/mobilephones
dr.norton said:
here is stock 2.1 with root:
http://forum.xda-developers.com/showthread.php?p=16800433
if you need an untouched system use official seus software from:
http://www.sonyericsson.com/cws/support/mobilephones
Click to expand...
Click to collapse
are these version match with U20i x10 mini pro???
I think your suggest is for U10i x10 mini not for mini pro
zaltran said:
are these version match with U20i x10 mini pro???
I think your suggest is for U10i x10 mini not for mini pro
Click to expand...
Click to collapse
sorry, you're right, these are for e10i / x10 mini.
still, you can use seus. and take a look 2.1.1.Clean.0.0 if you like:
http://forum.xda-developers.com/showthread.php?p=16412835
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
You do need that kernel, the rom won't work without it.
Have a look in the Development section for SE Tweaker, that'll tell you if your phone is unlocked.
Sent from my U20i using XDA App
If you never installed a custom kernel, your bootloader is locked so you need to unlock it before installing the kernel.
Latest MiniCM versions (from 2.1.0) need nAa's custom kernel to work so you have to install it or install a previous release of the ROM (I'd suggest 2.0.5)
use this to unlock your bootloader and flash a the nAa kernel - easy and quick
http://forum.xda-developers.com/showthread.php?t=986690
is it possible to flash the kernel after the rom? because I just did, and I got Sony Ericsson logo in screen.. can't install the kernel or go into recovery..
Super-Veloce said:
is it possible to flash the kernel after the rom? because I just did, and I got Sony Ericsson logo in screen.. can't install the kernel or go into recovery..
Click to expand...
Click to collapse
no you can and your doomed.
just joking. remember before installing a rom if the requirements says use this kernel then you should flash the kernel because it is required right? try going back to stock using pc companion or seus
Paddy3103 said:
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
Click to expand...
Click to collapse
You can put only MiniCM7Pro
http://forum.xda-developers.com/showthread.php?t=1201116
Cordially,
Ra
Paddy3103 said:
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
Click to expand...
Click to collapse
As far as I know, MiniCM7 works only with his nAa kernel, so your bootloader has to be unlocked. MiniCM Pro by paul-xxx uses stock kernel or custom kernels (nAa kernel with that rom will give a wifi error).
To check if you bootloader is unlocked. Use S1Tool and check the loader version. If it's a lower cased 'r' then it's unlocked, if not there are many tutorials around here to help you unlock your bootloader. Hope this helps.
@Paddy3103
Go to the official page (link below)
http://forum.xda-developers.com/showthread.php?t=1415026
It's got all the details that you'll need just make sure that you read every single line thoroughly.
If you make any mistakes than you can use sony ericsson update service to reset it back to the stock SE rom.
Btw I recommend that you use the flash tool to unlock bootloader and to check if its unlocked as Noobonic said use the SE1Tool.
For me I'd say that MiniCM7 is the best custom rom that exists right now but since we have to flash the nAa kernel it seems kind of risky at first but if you understand the steps and follow it properly than there's not much to worry about.
The other ROM's are also quite good but the MiniCM7 is the best and most stable custom ROM.
Good day everyone.
I accidentally flashed MiniCM9 on my X10 Mini.
nAa's thread in X8 forum said "MiniCM9 is built for the X8 / x10mini / x10minipro range", but in fact it only works on X8.
I was able to re-flash nAa's v11 kernel for X10 Mini back using Flashtool.
But the problem now is, how do I flash a ROM using Flashtool?
I tried to re-flash the latest MiniCM7 RAR file, but Flashtool cannot read the file.
Can anyone direct me to a ROM file for X10 Mini that Flashtool can detect?
I can't find any link(s) to X10 Mini ROMs using Flashtool.
EDIT:
BTW, do I need to flash a stock kernel instead of nAa's custom kernel?
In that case, can anyone re-direct me to the download links for X10 Mini stock kernel flashable via Flashtool?
Thanks.
entropy96 said:
Good day everyone.
I accidentally flashed MiniCM9 on my X10 Mini.
nAa's thread in X8 forum said "MiniCM9 is built for the X8 / x10mini / x10minipro range", but in fact it only works on X8.
I was able to re-flash nAa's v11 kernel for X10 Mini back using Flashtool.
But the problem now is, how do I flash a ROM using Flashtool?
I tried to re-flash the latest MiniCM7 RAR file, but Flashtool cannot read the file.
Can anyone direct me to a ROM file for X10 Mini that Flashtool can detect?
I can't find any link(s) to X10 Mini ROMs using Flashtool.
EDIT:
BTW, do I need to flash a stock kernel instead of nAa's custom kernel?
In that case, can anyone re-direct me to the download links for X10 Mini stock kernel flashable via Flashtool?
Thanks.
Click to expand...
Click to collapse
just install MiniCM7 via cwm after u flash the nAa kernel.. but u must wipe data/factory reset first.. then install zip from sd card.. navigate where u put the cm7 .zip file
SOLVED!
After flashing the nAa kernel, I was able to access CWM via holding Back button after reboot.
I was able to restore a NANDROID backup of MiniCM7 (I made sure to backup before flashing to MiniCM9 )
Now everything's back in working condition.
entropy96 said:
SOLVED!
After flashing the nAa kernel, I was able to access CWM via holding Back button after reboot.
I was able to restore a NANDROID backup of MiniCM7 (I made sure to backup before flashing to MiniCM9 )
Now everything's back in working condition.
Click to expand...
Click to collapse
glad to hear.. no thanks button?? haha
Hey,
I need help...
I have a problem in my Mini Pro Sk17i, after installing the rom ExMIUIv4 2.8.10, when I reboot, the phone freezes after the sony ericsson's logo appears. And stay that way until I take the battery.
My mini pro has locked bootloader.
Sorry for my bad english.
Thanks in advance
hknunes said:
Hey,
I need help...
I have a problem in my Mini Pro Sk17i, after installing the rom ExMIUIv4 2.8.10, when I reboot, the phone freezes after the sony ericsson's logo appears. And stay that way until I take the battery.
My mini pro has locked bootloader.
Sorry for my bad english.
Thanks in advance
Click to expand...
Click to collapse
As my bootloader was locked I got the same problem with exmiui v4. Better try another rom! Look here to flash rom back. Use Step 2. For 4.0.2.A.0.62 or 4.0.2.A.0.69 in the tutorial and flash your old rom back. I don't know what's wrong, but as I tried it didn't work, too.
Greets
Michael
hknunes said:
Hey,
I need help...
I have a problem in my Mini Pro Sk17i, after installing the rom ExMIUIv4 2.8.10, when I reboot, the phone freezes after the sony ericsson's logo appears. And stay that way until I take the battery.
My mini pro has locked bootloader.
Sorry for my bad english.
Thanks in advance
Click to expand...
Click to collapse
have you try to manually mounted your system using CWM??? base on your installing log your phone fails to mount the system....try to manually mounted your system then give us the feedback........
i flashed nAa kernal and than i used clock work mod to install minicm9 than when i turned it on it only showed the nAa kernal symbol and
rebooted over and over again please help im kinda stuck and dont know what to do
on naa logo tou must pres return some times until recovery menu start then you can use volume control to choose your rom...
aharonzu said:
i flashed nAa kernal and than i used clock work mod to install minicm9 than when i turned it on it only showed the nAa kernal symbol and
rebooted over and over again please help im kinda stuck and dont know what to do
Click to expand...
Click to collapse
What is your phone model and which kernel and rom did you use (give full names please). It would be tremendously helpful.
Did you installed nAa ICS kernel? Neither the normal version or the JB version will work! And another important thing is if you installed the correct kernel not the one for X10 mini (if you're using X10 mini pro) or the X10 mini pro one (if you're using X10 mini)