{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! Here I am with the new Android 4.3 Touchwiz rom. It's rooted, deodexed, knox free + does NOT flash the new bootloader (NO KNOX WARRANTY ON BOOTLOADER). It would not be possible to make it work without DerTeufel1980 kernel (Devil Kernel) - THANKS! Also THANKS to Chainfire for the SuperUser binaries + app! Since I am not a N7105 owner the development may be very slow.
I am a college student so any donation is very appreciated and will be very helpful (hahaha). Anyway, thanks everyone and enjoy the rom!
Code:
[SIZE="3"]*I am not responsible for bricked devices,
dead SD cards or anything else related with this.
*You are entirely responsible for what you're doing.
*I will, always when I can, update the thread with news and updates,
just be calm.
*Avoid discussion on the thread.
*Don't quote OP.
***You've been warned*** :)[/SIZE]
------------------------
INFO
>> Based on N7105XXUEMK5 4.3
>> 4.3 Modem included (well, I am not really sure what version it is)
>> Devil Kernel (Stock wifi not working)
>> Deodexed
>> Knox Free
>> Fully rooted
>> Free of new locked bootloader
> My rom is KNOX FREE, it means you WON'T get the locked bootloader + any of the knox apps. IF you still having the old bootlader (4.1.2) without knox on it, you will NOT get any "KNOW WARRANTY: 0x0" after flashing my rom; but if you already flashed the stock 4.3 via odin and got the new bootloader, the only thing I can say to you is: AVOID ROOTING YOUR DEVICE IN CASE YOU STILL HAVING WARRANTY, KNOX 0x1 WILL VOID YOUR WARRANTY FOREVER. -sorry for the caps-
> I do NOT have a N7105 to test the rom, I am making it just because I am sure there is people like my friend that doesn't want the new bootloader + a fully working, rooted, stock 4.3.
> READ ALL THE INSTRUCTIONS to install it properly.
> I am not a pro-developer, maybe I won't be able to help you but I will make sure to help you most I can.
> I make the rom flash the new 4.3 radio (modem). If you may face any problem related with mobile signal, just exchange the modem with the one you prefer.
> For now, it is needed to flash firstly the rom .zip with stock kernel and wait for it to boot and then flash Devil kernel and after Superuser update. As I said, I am not a pro developer and I am doing what I can to make sure I delivery a good and fully working rom to you all.
------------------------
CHANGELOG
Code:
[b][COLOR="Orange"]--V1.2--[/COLOR][/b]
- Revert V1.1 -.-
[b][COLOR="Orange"]--V1.1--[/COLOR][/b]
- Correction of SU binaries + app.
[b][COLOR="Orange"]--V1.0--[/COLOR][/b]
- First release
------------------------
BUGS
- You tell me
------------------------
HOW TO INSTALL
1- Normal process like any rom, FULL WIPE (system, data, cache and dalvik cache);
2- Flash Lion_Rom_N7105.zip (The install may take 2+ minutes);
3- Wait for the first boot (wi-fi probably won't be working);
4- Reboot recovery and flash Devil2-1.8.1-t0lte-DUAL-20131130.zip (I tested this version myself, other versions may not be working properly) and after flash UPDATE-SuperSU 1.80.zip;
5- Enjoy!
I highly recommend you to install xposed framework and try some of the modules to adapt the rom to your own way
IF YOUR USB IS NOT WORKING, FOLLOW THIS INSTRUCTIONS: http://forum.xda-developers.com/showpost.php?p=47604798&postcount=2645 (Thanks to baddesthad for posting and trickyhurl for sharing)
*If you're having any problems on recovery, just flash latest Philz recovery and go ahead.
------------------------
DOWNLOAD
Lion Rom V1.2 - READ INSTRUCTIONS!
UPDATE Super SU v1.80
LionROM N7105 4.3 Stock Kernel
Devil2 Kernel v1.8.1
LionROM N7105 4.3 Modem
------------------------
*Screenshot from beta test, show different modem and stock kernel*
Thanks! Waiting feedback
*reserved
Do we need to flash 4.3 modem separately?
Sent from N7105 Jedi X20, at the corner of this rounded earth.
antique_sonic said:
Do we need to flash 4.3 modem separately?
Sent from N7105 Jedi X20, at the corner of this rounded earth.
Click to expand...
Click to collapse
no, it's included, I've made a different .zip file just in case...
thanks for the rom,
just wanna confirm after read the op that can be revert to 4.1.2 after flash this?
and knox change to 0x1?
thanks
Any chance we could use air commands from note 3 on this rom?
no root support!
super su message:
there is no SU binary installed and superSU cannot install it.
I've run into some problems:
- SuperSU says that no SU-binary is installed and that i may need to re-root the system again
- I can't reboot into CWM because the Volume Up + Menu Button combination doesn't work now
- I can't reboot into CWM via Rom Manager as it needs root access to be able to do that
Solution: I had to flash CF-Auto-Root-t03g-t03gxx-gtn7100 via ODIN 3.0 (as PDA), after which i had to re-install SuperSU from the Play Store, start it up, and let it install the binaries (via CWM). I could then update CWM in Rom Manager (which was version 5.0 instead of 6.0 for some reason), reboot into recovery and finally flash the Devil kernel.
Hopefully this can be helpful to anyone who'd run into the same problems.
aguiamaster said:
Any chance we could use air commands from note 3 on this rom?
Click to expand...
Click to collapse
is the aircommand patch in skynote work ?
That one do not work, I did try to install as a total mess....and to help more I was on odex
Sent from my GT-N7105 using Tapatalk
RobbyRobbb said:
I've run into some problems:
- SuperSU says that no SU-binary is installed and that i may need to re-root the system again
- I can't reboot into CWM because the Volume Up + Menu Button combination doesn't work now
- I can't reboot into CWM via Rom Manager as it needs root access to be able to do that
Solution: I had to flash CF-Auto-Root-t03g-t03gxx-gtn7100 via ODIN 3.0 (as PDA), after which i had to re-install SuperSU from the Play Store, start it up, and let it install the binaries (via CWM). I could then update CWM in Rom Manager (which was version 5.0 instead of 6.0 for some reason), reboot into recovery and finally flash the Devil kernel.
Hopefully this can be helpful to anyone who'd run into the same problems.
Click to expand...
Click to collapse
tht works for me, flashing the CF-Auto-Root thru Odin
thanks!
I can takeany more.
Does this work on att phone?
Sent from the TermiNOTEr 2!
borijess said:
Does this work on att phone?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
+2
And can we flash from twrp or odin only? Would that wipe the recovery too?
Sent from my GT-N7105 using xda app-developers app
=====psycho-crusher===========>
actually its a zip. i think its twrp
I've just followed the instructions and have NO any issues in installation.
Able to go back to recovery and flash new kernel.
My wifi is working... will be testing it more and will report back in a few days time.
By the way, I have an international lte from hk.... oh and I was using Jedi X-17 (4.1.2) before this ROM.
Got the same error message when opening SuperSU and had to install CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip via Odin3 (PDA). After this, have to install SuperSU from GooglePlay. I also installed TriangleAway.
rookie_aus said:
I've just followed the instructions and have NO any issues in installation.
Able to go back to recovery and flash new kernel.
My wifi is working... will be testing it more and will report back in a few days time.
By the way, I have an international lte from hk.... oh and I was using Jedi X-17 (4.1.2) before this ROM.
Got the same error message when opening SuperSU and had to install CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip via Odin3 (PDA). After this, have to install SuperSU from GooglePlay. I also installed TriangleAway.
Click to expand...
Click to collapse
so you didnt already have 4.3 ?
Why can't we install Devil kernel from the begining, instead of flash the stock one first and then Devil?
Thanks
Yes that's right. I was waiting for 4.3 from Jedi but am a bit impatient and tried this one. So far so good. Running very fast.
Sent from my GT-N7105 using xda app-developers app
Sorry for the mess with SU, I included wrong one by mistake. It shoudn't be a problem at all as you can just go into cwm and flash UPDATE SuperUser 1.75 from Chainfire... REVERTING AND UPLOADING V1.1
Sent from my GT-I9505 using xda app-developers app
Related
Hello Gentlemen,
Last time I managed to root my device Samsun galaxy S III (GT-I9300) via CF-Root 6.4 and it was successfully rooted,
This was the last time it has been rooted, afterwards, I upgraded and flashed a Jelly Bean 4.1.1 via Odin and found out that Root has GONE !!!
That's okay, but the most amazing problem is, the device does never get rooted no matter how many times I try to root it via the same method mentioned above (CF-Root 6.4),
I though afterwards that this is because CF-Root needs to be updated or something, so I reverted back to ICS 4.0.4 by flashing a stock md5 ROM over.
I tried the CF-Root 6.4 and found out it does not work anymore, please help me gentlemen as I spent the last night trial & error, never succeeded.
I am doing all of this just because I want to flash the HD 14 Android Revolution ROM made by Mike here:
http://forum.xda-developers.com/showthread.php?t=1797334
I hope there was an md5 or tar file (Odin flashable) so that it could be much easier to flash for people who are stuck with this situation.
can you post the exact file name you are trying to use to root
slaphead20 said:
can you post the exact file name you are trying to use to root
Click to expand...
Click to collapse
It is Chainfire CF-Root 6.4 (Latest one)
you many find it here
http://forum.xda-developers.com/showthread.php?t=1695238
Thank you
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Engineering Support said:
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Click to expand...
Click to collapse
Can you see the su app? If not try installing it
similar problem
Hi, Im having a similar problem, I was rooted, upgraded to 4.1.1 through kies and it was rooted no more. I rooted it again and no problem. I tried a custom rom and it had an issue with wifi so I went back to stock. Now Ive loaded the stock back on and after wiping/factory reset and clear cache it still says Im running a custom binary, system status is custom also, so trying to root it again so I can reset the flash counter and load my backup but it keeps getting stuck on set up connection on odin and eventually fails.
Ive been at this all afternooon with out much luck, can anyone provide me with some guidance on this?
Hi
I have the same problem
slaphead20 said:
Can you see the su app? If not try installing it
Click to expand...
Click to collapse
I can't see anything like SU or CWM or anything else, besides, I use root checker and it tells me that I am not rooted yet.
Any idea why this is happening?
Also I noticed that upgrading to Jelly Bean changes the SDCard name to Sdcard0
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
have you tried flashing a custom kernel which autoroots?
Sent from my GT-I9300 using Tapatalk 2
Must be having a brain dead day today! Totally forgot about the rebooting recovery to trigger installation....my bad! That will fix it
Finally
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I finally got it to flash the .tar file in odin, in odin I unpluged the phone after hitting start ( it was just in SetUpConnection doing nothing ) and when I plugged in straight away it started doing its thing. However it didnt go through and load the SU etc. So I did it over again using the above method and it worked:good:. So thanks to you Mopral!!:laugh:
Engineering Support said:
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
By following the above simple steps, I got what I want and resolved this puzzle which really pissed me off for 3 nights already,
Many thanks XDA
Does not work for me
My stats
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No-Wipe Factory Image for Verizon Galaxy S4
(Restore from any soft-brick without wiping data)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description: This is a guide (based similar to my previous guide for the Verizon Galaxy S III) that will help you flash a 99.9% stock factory image for the Verizon Galaxy S4 overwriting every partition on the device back to stock. The ONLY major change I have made is for your convenience I have modified the factory image to keep all your data/apps/settings and internal storage partition intact. This method should help you restore from any soft-brick that you may encounter without having to wipe your data.
Minor Warning: Please note that if you had any special mods that you had to manually flash before or move on the system partition (like Google Wallet, AOSP 4.2 apps like camera and gallery, etc...) they will be lost as you are overwriting your system partition to factory stock. Please make sure to do the needful with your mods before following this guide (for example resetting the Google Wallet app).
Step 1 - Preparation
Download and Install Samsung Official USB Drivers - Link
Download and extract ODIN v3.07 - Link
Download and extract the correct Factory Image below (modified with No-Wipe):
For VRUAMDK Build (Look for this) - Link
For VRUAME7 Build (Look for this) - Link
For VRUDMI1 Build (Look for this) - Link
Click to expand...
Click to collapse
Step 2 - Flashing Factory Image
Boot phone into ODIN mode (See here for how-to)
Flash the Factory Image using ODIN v3.07 ***in PDA section only*** (See here for guide on flashing)
You should now be able to boot back to Android and all your data should be intact exactly as it was
Click to expand...
Click to collapse
Step 3 - Restoring Root (Optional)
Just follow one of the below guides again after you are back up and running:
For VRUAMDK Build (Look for this) - Link
For VRUAME7 Build (Look for this) - Link
For VRUDMI1 Build (Look for this) - Link
Click to expand...
Click to collapse
Step 4 - Restoring Custom Recovery (VRUAMDK Build only!)
Make sure you are rooted first
For official TWRP Recovery follow the steps in this thread (or download from Goomanager): Link Here
For official ClockworkMod Recovery just download ROM Manager app and install from there
For CWM-based Recovery follow the steps in this thread: Link Here
For OUDHS Gesture Touch CWM-based Recovery follow the steps in this thread: Link Here
Click to expand...
Click to collapse
Credits
Credit goes to sextape for providing the original VRUAMDK Stock Firmware (Original Source)
Credit goes to mrRobinson for assisting to modify cache file (via PM)
Credit goes to alexcolodner for providing filehosting (via PM)
Wonderful! Thank you
Thanks for this. On point as usual
Sent from my SCH-I545 using xda premium
This is GREAT!!! Thank you.
Sent from my SCH-I545 using Tapatalk 2
@open1your1eyes.... can this be posted on droid-hive?
sporty377 said:
@open1your1eyes.... can this be posted on droid-hive?
Click to expand...
Click to collapse
Certainly, just make sure to give the proper credits as I have in my post.
open1your1eyes0 said:
Certainly, just make sure to give the proper credits as I have in my post.
Click to expand...
Click to collapse
yes sir thanks
This is very good,this post deserve another sticky.
is this good for restoring to factory for insurance purposes? My s4 has a defect and I have to take it back in to get a replacement :-/
Elvis_Marmaduke said:
is this good for restoring to factory for insurance purposes? My s4 has a defect and I have to take it back in to get a replacement :-/
Click to expand...
Click to collapse
Absolutely, just with this one make sure to do your own data wipe afterwords since this one doesn't wipe it automatically.
It didn't put me on stock recovery so i was still getting that unlocked bootloader thingie, but I found a stock recovery and it worked like a charm, thanks a lot
Elvis_Marmaduke said:
It didn't put me on stock recovery so i was still getting that unlocked bootloader thingie, but I found a stock recovery and it worked like a charm, thanks a lot
Click to expand...
Click to collapse
Ahh I knew I forgot something. Simple fix, I'll get the new one up either tonight or tomorrow. For now you can probably consider it a good thing you don't have to reflash recovery if you're trying to keep data. :good:
open1your1eyes0 said:
No-Wipe Factory Image for Verizon Galaxy S4
(Restore from any soft-brick without wiping data)
Description: This is a guide (based similar to my previous guide for the Verizon Galaxy S III) that will help you flash a 99.9% stock factory image for the Verizon Galaxy S4 overwriting every partition on the device back to stock. The ONLY major change I have made is for your convenience I have modified the factory image to keep all your data/apps/settings and internal storage partition intact. This method should help you restore from any soft-brick that you may encounter without having to wipe your data.
Minor Warning: Please note that if you had any special mods that you had to manually flash before or move on the system partition (like Google Wallet, AOSP 4.2 apps like camera and gallery, etc...) they will be lost as you are overwriting your system partition to factory stock. Please make sure to do the needful with your mods before following this guide (for example resetting the Google Wallet app).
Step 1 - Preparation
Step 2 - Flashing VRUAMDK Factory Image
Step 3 - Restoring Root (Optional)
Step 3 - Restoring Custom Recovery (Optional)
Credits
Credit goes to sextape for providing the original VRUAMDK Stock Firmware (Original Source)
Credit goes to mrRobinson for assisting to modify cache file (via PM)
Credit goes to alexcolodner for providing filehosting (via PM)
Click to expand...
Click to collapse
after the step 3 do i have to do this
Step 4 - Restoring VRUAMDK Stock Kernel
Quote:
Boot phone into ODIN mode (See here for how-to)
Flash the VRUAMDK Stock Kernel using ODIN v3.07 ***in PDA section only*** (See here for guide on flashing)
Boot back to Android and verifying everything is still working and kernel has flashed successfully
After your phone boots back to Android, you should now be fully rooted and on the fully original stock firmware as the device came
android-incredible said:
after the step 3 do i have to do this
Step 4 - Restoring VRUAMDK Stock Kernel
Quote:
Boot phone into ODIN mode (See here for how-to)
Flash the VRUAMDK Stock Kernel using ODIN v3.07 ***in PDA section only*** (See here for guide on flashing)
Boot back to Android and verifying everything is still working and kernel has flashed successfully
After your phone boots back to Android, you should now be fully rooted and on the fully original stock firmware as the device came
Click to expand...
Click to collapse
Please kindly do not quote the entire post. Also I believe you're referring to my root thread in which case yes you should, but please keep posts related in that thread instead.
I have uploaded and updated OP link with new No-Wipe image that includes stock recovery now as well.
Hello will this method work wit the s4 att phone... Plz say it will work I got myself in a jam...thanks
please help! im getting a compressed folder is invalid or corruted when trying to extract the file. i have tried to re download and get the same thing.
edit: the factory extract tool sucks. thanks 7zip
I was talking about no wipe factory image.and i was confuse with this process,because after the step 3 l wasnt sure if i have to go to the step 4.
azz72 said:
Hello will this method work wit the s4 att phone... Plz say it will work I got myself in a jam...thanks
Click to expand...
Click to collapse
May want to check with the dev who posted the AT&T firmware to make one. This is Verizon only!
android-incredible said:
I was talking about no wipe factory image.and i was confuse with this process,because after the step 3 l wasnt sure if i have to go to the step 4.
Click to expand...
Click to collapse
Steps 3 and 4 in this thread are optional only if you're trying to restore root and custom recovery again and you had it before or just want it for the first time. If you don't know, may want to read up on it in the thread. Probably don't need it for now.
I dont have to do it now,my problem was with a custom rom,after install the custom rom the phone reboot with the padlock,i was trying to get rid of the pad lock reinstallig the goomanager and no luck,what i did was restore my nandrood backup and the padlock gone.
Hello LG L9 II (D605) users. Here's a thread what people can easily find when googling and here's a quick overview what's available.
Your warranty is most likely now void. Unless you are in EU.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about the instructions or the linked things before doing anything!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you and I promise, I will!
If you need help feel free to ask here! But if you ask something that's written here I am a bit mad at you, but I will try to still help you.
[Download links]
Stock KK flashable .zip (open_eu)(v20a) (@Varcain):
https://mega.co.nz/#!gR0y1CyZ!AIwn2eQi4-lenozZrXTLtL_8e_mrBGgOmaoS6Rkh2Pk
.kdz flasher:
https://app.box.com/s/cuosc0fq3bggjutzsbme
Stock JB rooting (@saurik):
http://forum.xda-developers.com/showthread.php?t=2448085
LGhome themes:
http://forum.xda-developers.com/showthread.php?t=2719006
.kdz roms: - I increased the size to make it more noticable
http://lg-phone-firmware.com/index.php?id_mod=37
CyanogenMod 10 and stock JB .zip (@Varcain):
http://forum.xda-developers.com/showthread.php?t=2633709
LineageOS 11:
https://forum.xda-developers.com/android/software/rom-lineageos-11-d605-t3679196
ClockWorkMod touch recovery (@Varcain):
http://forum.xda-developers.com/showthread.php?t=2652201
Statusbar mods (flashable .zip) for Stock JB (@lioko27):
http://forum.xda-developers.com/showthread.php?t=2673739
CyanogenMod 11:
http://forum.xda-developers.com/showthread.php?t=2752715
Modded CyanogenMod 11:
http://forum.xda-developers.com/showthread.php?t=2759031
[Commonly asked questions]
[Q] How to update to KK?
[A] If you have root and CWM install the flashable .zip. If you have stock unrooted JB use OTA.
[Q] How to root the stock KK rom?
[A] Use the method Varcain provided if you have CWM. If not use Towelroot but remeber that you cannot install CWM if you rooted your KK with Towelroot. (When you update to KK via any other method than CWM you lock your bootloader and the only way to unlock is to flash JB.kdz!)
[Q] I have a bricked device (softbrick with no CWM), how to fix?
[A] Install the stock JB .kdz or stock KK .kdz.
[Q] I have a bricked device (hardbrick), how to fix?
[A] Try smashing it into a wall (It's a joke). (How have you managed to hardbrick it?)
[Q] I have other questions or things related to LG D605, what to do?
[A] Share your news or problems with D605 in this thread.
[Q] Is XPosed framework working on stock roms?
[A] Yes, Xposed framework is working on both JB and KK stock roms.
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
[Q] How to boot to CWM without root?
[A]
1. Reinsert battery
2. Hold Power+Vol Up+Home for about ten seconds a white text appears, that says "Release all buttons" you have 500ms time if it reboots start from step 1 again.
YOU HAVE TO BE VERY EXACT! (If you once installed CWM you have it even when you flashed KK .zip)
[Q] How to downgrade to stock JB(without CWM)?
[A] Flash the .kdz
[Q] Unable to mount /data in CWM, how to fix?
[A] You most likely entered the recovery trough hard reset combo, that caused the problem. Use vol up+power combo next time, it might be a little harder to enter then but it will not cause any problems then. To fix the problem format /data/media from CWM.
[Q] What's the difference between v20a and v20b(or v20c) .kdz?
[A] v20b or v20c might be all branded, it is better to use unbranded versions as carriers may install some bloat or lock some functions. Use v20a OPEN_EU if possible (if you want you may install v20b or c to a unbranded phone too), if you already have branded JB then it may make more sense.
[Q] How to enable USB debugging on KK rom?
[A] Go to "About phone" menu and click the build number repeatedly to access developer settings.
[Q] I am unable to format /data in CWM, how to fix it?
[A] You most likely entered the recovery via Factory Reset combination (don't do that) and you deleted the /data partition. To fix format /data and /data/media .
[Q] How to downgrade to JB?
[A] Install JB .kdz (available from the link provided, either v10a or v10b)
[Q] I want to install CM 11, what should I wipe before install?
[A] Everything exept External SD
[Q] I am unable to install CWM with the method Varcain has provided, how to fix?
[A] Post the error here. (If you got "invalid path" then http://lmgtfy.com/?q=file+path and open the wikipedia thread)
[Q] How to install CWM on Stock KK?
[A] *in progress*
[Q] Why isn't there any sound coming from the second "speaker" from the bottom?
[A] Because one of the "speakers" is actually a microphone. (One of the stereo speakers is at the top, one at the bottom of the phone)
[Q] What should I wipe to install Cyanogenmod?
[A] Wipe everything except external SD. (including /data/media - internal storage, to avoid storage losses and ensure smooth experience)
Click "Thanks" if this post helped you!
(If something should be added here just send me a message here, on XDA)
A good idea :good:
Good job.
I added .kdz flashing tutorial and some commonly asked questions. (Thanks @[W]ar[H]ead!)
Sent from my LG-D605 using Tapatalk
Hi everyone, is there a way to use stock weather and music app when you are on a different launcher (nova). I cant seem to find it in widgete menu or anywhere else. Im on OpenEU Kitkat rom with cwm. Thanks
Daywho said:
Hi everyone, is there a way to use stock weather and music app when you are on a different launcher (nova). I cant seem to find it in widgete menu or anywhere else. Im on OpenEU Kitkat rom with cwm. Thanks
Click to expand...
Click to collapse
It might be the fact that the widgets are build into the launcher and available only from the stock launcher. Like GO Launcher has some.
Do I lose my apps, data, contact etc. when I update with LG PC Suite?
RonninDAMN said:
Do I lose my apps, data, contact etc. when I update with LG PC Suite?
Click to expand...
Click to collapse
There is always a chance that you can lose your data. So better backup before update.
Sent from my LG-D605 using Tapatalk
@whirring91 with both dalvik and ART I'm missing more than 1Gb of space.
@Avamander I updated by flashing .zip from recovery
@Avamander i find this topic very usefull thnx man but i still cant get into recovery xD (when i was rooted with stock jb i was using terminal emulator to boot into cwm recovery ,now that i flashed stock kk root doesnt work and Cydia impactor doesnt recognize the device to root again so what can i do ? zdk works without root, if i get into dowload mode ?cause i can do it xD and iam thinking of going back to 4.1.2 stock or @Varcain's cm 10version expect u have a way to work root with kk (sry for my bad english guys )
starxidistis said:
@Avamander i find this topic very usefull thnx man but i still cant get into recovery xD (when i was rooted with stock jb i was using terminal emulator to boot into cwm recovery ,now that i flashed stock kk root doesnt work and Cydia impactor doesnt recognize the device to root again so what can i do ? zdk works without root, if i get into dowload mode ?cause i can do it xD and iam thinking of going back to 4.1.2 stock or @Varcain's cm 10version expect u have a way to work root with kk (sry for my bad english guys )
Click to expand...
Click to collapse
The timing must be exact, if you release the keys too soon or too late the device (re)boots.
Sent from my LG-D605 using Tapatalk
starxidistis said:
@Avamander i find this topic very usefull thnx man but i still cant get into recovery xD (when i was rooted with stock jb i was using terminal emulator to boot into cwm recovery ,now that i flashed stock kk root doesnt work and Cydia impactor doesnt recognize the device to root again so what can i do ? zdk works without root, if i get into dowload mode ?cause i can do it xD and iam thinking of going back to 4.1.2 stock or @Varcain's cm 10version expect u have a way to work root with kk (sry for my bad english guys )
Click to expand...
Click to collapse
when you make a question check if someone answer to you... read BEFORE write
I also lost quite a lot of space on the internal memory after the update to Varcain KK ( zip version ).
i was wipe data , cache , dalvik, format system.
I don't know why
jareee said:
I also lost quite a lot of space on the internal memory after the update to Varcain KK ( zip version ).
i was wipe data , cache , dalvik, format system.
I don't know why
Click to expand...
Click to collapse
please post screenshot of your internal storage. I've lost more than 1.3Gb of space, it's just missing and I don't know why
I have 1gb free, and about 1.6gb used. Total storage is 3.94gb, so 1.3gb is missing
aaallleeennn said:
please post screenshot of your internal storage. I've lost more than 1.3Gb of space, it's just missing and I don't know why
I have 1gb free, and about 1.6gb used. Total storage is 3.94gb, so 1.3gb is missing
Click to expand...
Click to collapse
I lost about 2gb of the internal memory space
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D605 using Tapatalk
jareee said:
I lost about 2gb of the internal memory space
Sent from my LG-D605 using Tapatalk
Click to expand...
Click to collapse
same thing happened to me
I updated it with pc suite and it's fine.
RonninDAMN said:
I updated it with pc suite and it's fine.
Click to expand...
Click to collapse
but u flash KK via OTA and i used Varcain updated KK rom wit unlock bootloader
Yeah, true. I used OTA because I didn't even root 4.1.2, so I don't need it now too. At least not in near future.
jareee said:
but u flash KK via OTA and i used Varcain updated KK rom wit unlock bootloader
Click to expand...
Click to collapse
It seems that you forgot to wipe something or the
Sent from my LG-D605 using Tapatalk
Most of the people on xda getting error while flashing new update on YU yureka.
so i have created this thread to solve there's problems :highfive:
you just have to follow some steps.
1.you should be on stock recovery.
if you do not have stock recovery then here is LINK
************************************************************
2. now you need big data pack you have to download whole updated stock rom which is approx 643.767 MB
here is LINK.
3. now put this in internal storege(not in any folder or ext_sd card)
4. go to recovery and apply update. and choose this zip file and flash it :good:
and now very important step. Hit thanks button :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
sunny765 said:
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
Click to expand...
Click to collapse
yes bro if you want update then you should be on stock if you have backup ur stock rom then just restore it.
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Rakesh251 said:
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Click to expand...
Click to collapse
have tried flishify app?
LINK
flash using this.
i have not tried yes but search.
Why is it 643 mb the update is just 130mb
thearjunraju said:
Why is it 643 mb the update is just 130mb
Click to expand...
Click to collapse
'cos it's the "whole updated stock rom", i.e., stock rom + the latest update rolled into one convenient easy-to-use package. read the op.
i was reading stock kernel was needed
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
oemaritradey said:
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
Click to expand...
Click to collapse
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
feeroz123 said:
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
Please flash any custom kernel to see if it works or not :3
oemaritradey said:
Please flash any custom kernel to see if it works or not :3
Click to expand...
Click to collapse
I am on thunderzap kernel
enjoy happy flashing .
best of luck
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
LOL i tried falshing stock kernel with flashify both time i didnt get wifi signal(MAC UNKNOWN) xD Am not switching over to new update anytime soon....
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
feeroz123 said:
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
Click to expand...
Click to collapse
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
ashish_zarekar said:
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
Click to expand...
Click to collapse
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
feeroz123 said:
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
Click to expand...
Click to collapse
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
m_rajaganesh said:
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
Click to expand...
Click to collapse
DO NOT SPAM.
read carefully i already told the steps in my first POST
download stock kernel and flash it.
download stock recovery and flash it.
now download whole rom from my post and flash it.
ashish_zarekar said:
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Click to expand...
Click to collapse
I am sorry, I put it in wrong terms.
The CWM recovery (having basic look with text in blue that can be opted only using hardware buttons and not touch) is not shown for me now. The Cyanogen Recovery it shows me now looks new (with Apply Update option that can be opted by touch as well). THis new recovery fails whenever I try to flash any zip with it. The error being R/W error or something.
With the old recovery (CWM recovery) I could/did flash the Root.zip. After flashing this full ROM (having the patch), the old recovery is lost. It shows only the new recovery. And with it the Root.zip can not be flashed as it fails, as I mentioned earlier.
May be I will get you screenshots of the new Cyanogen recovery to explain what I mean.
Old CWM Recovery:
New Cyanogen Recovery:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
SlimPickins will not flash. Recommended to flash using TWRP 2, make a backup of the System, then upgrade to TWRP 3.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Let me just steal this...
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
bogarty said:
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yes, but not without the help of @Y300-0100.
xRaZeR_FuZioNx said:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Click to expand...
Click to collapse
YASSS!! TWRP 3 is out! Now at least recovery can look nicer and much improved now.
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Thank you for letting me know. I can confirm this issue appears at the "formatting system" step. I'll look into this issue and see what may be causing it.
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Y300-0100 said:
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Click to expand...
Click to collapse
I don't believe so, if you're referring to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
thisisapoorusernamechoice said:
I don't believe so, if you're conflict bing to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
Click to expand...
Click to collapse
So as I thought. Wipe system definitely working but there must be some conflict between updare binary and updater script with twrp since you restored system. First recovery wipe system and than restore it.
this conflict is common when rom is made with kitchen.
So wait for cm. It won't be to long
Y300-0100 said:
So wait for cm. It won't be to long
Click to expand...
Click to collapse
God I can't wait. I synced the repos but I can't seem to get it to build, no matter what I tinker with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Unfortunately, that was the case for me, too. I was able to wipe but not able to install the Slim Pickins ROM. It came up with an error. So I had to go back to TWRP 2.8.7.0 and successfully install the ROM.
Thanks
I've hung out in the irc almost every day and got to see this be made and released thanks all to who contributed to it now to make cm
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
X_shinobi.apk_X said:
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
Click to expand...
Click to collapse
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
X_shinobi.apk_X said:
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
Click to expand...
Click to collapse
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try using flash fire by chainfire if you still need to install twrp and can't use a PC. It's the successor to mobile Odin and is compatible with way more devices including virtually every Samsung device. Flashify might work too. Obviously either app will require root
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I think the "reboot to recovery" causing a recovery loop issue might be a system one. It's always been an issue on this device. There are quite a few versions of TWRP now for the SM-G360T1, but all if them do it. I think it even did it with the stock recovery too. Not a big deal though in my mind. Just have to remember to always reboot normal.