Related
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
can you try what you find here: http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
I've experienced the same thing long back, it happens when recovery gets damaged...don't worry, the phone is not bricked...I recovered it by flashing back official firmware by using KDZ...
I'm assuming, u r not able to go to recovery either...r u?
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
dmayurx said:
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
Click to expand...
Click to collapse
Try the 8th point mentioned in the post...
Code:
http://forum.xda-developers.com/showthread.php?t=883314
dmayurx said:
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
Click to expand...
Click to collapse
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
shhbz said:
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
Click to expand...
Click to collapse
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
u can use kdz with the emergency mode...nothing to do with the USB debugging...the problem is the phone is not recognized...try many times with the "shaking technique"...it will work for sure, it worked for me...
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
well i am saying that be sure to enable usb debugging in future for the time just use the method to revive your phn back ,when ur phn is on just be sure usb debugging is enabled and than flash recovery using any method u r comfortable with, use the lgmdp method its safe and kdz flashing is used the shaking method when the phn is in dead condition as ur phn boot to lg logo so the lgmdp method will work even the kdz but the later one is bit risky.
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Most probably he will be confused like hell by seeing all those answers like
Go for lgmdp no go to kdz no phone bricked ma money oh GOD.. :banghead:
Am not spamming by the way lol........
doppelgänger said:
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
still phone stucks on lg logo.
nothing happens when I press the Vol up + return button.
i tried without emergency mode but it won't help
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
dmayurx said:
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
Click to expand...
Click to collapse
Completely switch off your phone
Press Power + Home button
It will boot into fastboot mode and then just follow the method as shown on the thread (link that you mentioned)
Make sure to download 5.0.2.0 CWM recovery image from here
Two things that i wanna advise you about
1) Read that thread very carefully, understand what you are doing and follow each and every command.
2) Make sure to rename the download *.img file to recovery.img
Note that .img is the extension and not to be included in name
I'm sure this will help
Once done, type in fastboot reboot and wait for the phone to boot to the previous instance, where the phone was before this happened
Avoid using 5.0.2.7; its buggy
dmayurx said:
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
Click to expand...
Click to collapse
Don't use this. Use the previous link you mentioned
DJoptimus-One said:
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Click to expand...
Click to collapse
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
kiran2cy said:
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
Click to expand...
Click to collapse
Nice to hear that it helped others out too
I suffered from this about 20 times but it took me 2 minutes to recover back
I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
saman_z1384 said:
I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
Click to expand...
Click to collapse
use offline flashing, or CWM restore
cgigate said:
use offline flashing, or CWM restore
Click to expand...
Click to collapse
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
saman_z1384 said:
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
Click to expand...
Click to collapse
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
hugoglezp said:
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
Click to expand...
Click to collapse
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
saman_z1384 said:
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
Click to expand...
Click to collapse
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Lelus said:
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Click to expand...
Click to collapse
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
saman_z1384 said:
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
Click to expand...
Click to collapse
you are in upgrade mode, you need flash kdz directly. i killed my phone many times.
if you still not get , sold as "none working for parts on eBay "
Sent from my LG-E970 using Tapatalk HD
any body help mee???? :|
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
OperationNT said:
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
Click to expand...
Click to collapse
yes i try by 3 cpmputer. they have win 7. but it doesnt fix
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
tnx lelus. i hope it work
same problem with P769
Will watch this fix for results. I have same issue with P769 which has been stuck in s/w upgrade loop after offline server crashed. was at point of 12 bin files in appdata phone folder when server stopped.
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
saman_z1384 said:
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
Click to expand...
Click to collapse
you have to fastboot your phone first then run start.bat
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
dish53 said:
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1971743&d=1368878496
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
dish53 said:
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
Click to expand...
Click to collapse
you need to install fastboot drivers twice, once before you run the omap4fastboot and again after running it when you see that mirrored fastboot text
Hi all!!
Yesterday i tried to install android 4.4 but the procces didnt succeed, it stuck at. LG boot logo. So i decided to restore my backup in ckockworkmod,it started the process then stopped at the phase "restoring /system" . I waited about a half hour, and because it didnt take the much time before, i took out the battery. I read somewhere that formatting the system partition in cwm could help, so i did that. Then i retried restoring my backup. It stuck at the same phase. Later i downloaded the official kdz, and decided to flash it. I could bring the phone in update mode, but the process stopped at 15% at lg update manager.
At the moment i can get into clockworkmod, but cant restore /system . The update mode is also okay. I dont know that fastboot works or not. I havent tried it yet. Please help me thanks in advance
@trapistasajt
You will need to get fastboot working and use lelus's fastboot script to flash the "u" and "x" loaders for the device and then perform the offline or online flash
http://forum.xda-developers.com/showthread.php?t=2292828
Also as you found out you cannot flash custom roms without ulocking the bootloader first and you cannot use the L9 CWM bootstrap recovery for Locked Bootloaders, too flash custom roms.
try this online flash methode with B2CAppSetup
http://forum.xda-developers.com/showthread.php?t=2085344
i had the same probleme and i fixed it .
My bootloader is unlocked. I tried the fast boot method, but it doesnt go further than "Waiting for omap...." . So, i couldnt go into fastboot (probably my fault). Yesterday i sent it to the service. If they notice that my varranty is void (because of the unlocked bl) and send it back, i will try it once more. I would be very thankful if someone could write a noob friendly-fastboot guide. As i read, lots of people are struggling with the same problem. Thanks in advance!!!
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
jufece said:
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
Click to expand...
Click to collapse
I installed the drivers but it didnt work
trapistasajt said:
I installed the drivers but it didnt work
Click to expand...
Click to collapse
what happened??
jufece said:
what happened??
Click to expand...
Click to collapse
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
trapistasajt said:
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
Click to expand...
Click to collapse
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
jufece said:
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
Click to expand...
Click to collapse
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
trapistasajt said:
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
Click to expand...
Click to collapse
It shows something about firmware ir will restore. Ir will flash the latestbfirmware from original carrier release.
For example i actuallybhave v20L but my original carrier only released v10a. It will restore to v10a
None of them works, other ideas?
This fastboot method worked for me in 5 min, pay close attention to the instructions and it works!
http://androidforums.com/optimus-l9-all-things-root/807569-guide-security-error-fix.html
Spent days with LG update tool which if you read the log has no url for files to download.
Good luck!
I got my phone back from the service. They didnt repair it, because my varranty is void. I tried the methods mentioned above.
First, I tried flashing kdz, (with the solution for post-jb problem), but i couldn't get into S/W mode, which was available before the service.
Second, since i couldn't load S/W mode, the LG upgrader wasn't successfull, too
Third, fastboot still not work.
I am sure, that im not the only person with this problem, since it happened during installing @artas182x 's JB 4.4 rom. Please @artas182x or somebody write a noob-friendly guide/suggestion which may help to unbrick my beloved phone. Thanks!!!!!
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80120c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
raptorddd said:
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Edit: nvm I read what nuke download mode is (when no recovery and can't boot). I will try it now and see if it helps...
brickedvice said:
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Click to expand...
Click to collapse
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
raptorddd said:
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
Click to expand...
Click to collapse
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
brickedvice said:
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
Click to expand...
Click to collapse
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
raptorddd said:
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
Click to expand...
Click to collapse
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
brickedvice said:
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
raptorddd said:
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
Click to expand...
Click to collapse
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
brickedvice said:
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
Click to expand...
Click to collapse
i do not know either.. shortening the mother board is to enter download mode..
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
This thread here : http://forum.xda-developers.com/showthread.php?t=2449670 might help you installing twrp via adb
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.