Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80120c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
raptorddd said:
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Edit: nvm I read what nuke download mode is (when no recovery and can't boot). I will try it now and see if it helps...
brickedvice said:
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Click to expand...
Click to collapse
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
raptorddd said:
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
Click to expand...
Click to collapse
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
brickedvice said:
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
Click to expand...
Click to collapse
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
raptorddd said:
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
Click to expand...
Click to collapse
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
brickedvice said:
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
raptorddd said:
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
Click to expand...
Click to collapse
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
brickedvice said:
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
Click to expand...
Click to collapse
i do not know either.. shortening the mother board is to enter download mode..
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
This thread here : http://forum.xda-developers.com/showthread.php?t=2449670 might help you installing twrp via adb
Related
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
can you try what you find here: http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
I've experienced the same thing long back, it happens when recovery gets damaged...don't worry, the phone is not bricked...I recovered it by flashing back official firmware by using KDZ...
I'm assuming, u r not able to go to recovery either...r u?
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
dmayurx said:
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
Click to expand...
Click to collapse
Try the 8th point mentioned in the post...
Code:
http://forum.xda-developers.com/showthread.php?t=883314
dmayurx said:
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
Click to expand...
Click to collapse
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
shhbz said:
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
Click to expand...
Click to collapse
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
u can use kdz with the emergency mode...nothing to do with the USB debugging...the problem is the phone is not recognized...try many times with the "shaking technique"...it will work for sure, it worked for me...
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
well i am saying that be sure to enable usb debugging in future for the time just use the method to revive your phn back ,when ur phn is on just be sure usb debugging is enabled and than flash recovery using any method u r comfortable with, use the lgmdp method its safe and kdz flashing is used the shaking method when the phn is in dead condition as ur phn boot to lg logo so the lgmdp method will work even the kdz but the later one is bit risky.
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Most probably he will be confused like hell by seeing all those answers like
Go for lgmdp no go to kdz no phone bricked ma money oh GOD.. :banghead:
Am not spamming by the way lol........
doppelgänger said:
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
still phone stucks on lg logo.
nothing happens when I press the Vol up + return button.
i tried without emergency mode but it won't help
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
dmayurx said:
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
Click to expand...
Click to collapse
Completely switch off your phone
Press Power + Home button
It will boot into fastboot mode and then just follow the method as shown on the thread (link that you mentioned)
Make sure to download 5.0.2.0 CWM recovery image from here
Two things that i wanna advise you about
1) Read that thread very carefully, understand what you are doing and follow each and every command.
2) Make sure to rename the download *.img file to recovery.img
Note that .img is the extension and not to be included in name
I'm sure this will help
Once done, type in fastboot reboot and wait for the phone to boot to the previous instance, where the phone was before this happened
Avoid using 5.0.2.7; its buggy
dmayurx said:
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
Click to expand...
Click to collapse
Don't use this. Use the previous link you mentioned
DJoptimus-One said:
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Click to expand...
Click to collapse
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
kiran2cy said:
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
Click to expand...
Click to collapse
Nice to hear that it helped others out too
I suffered from this about 20 times but it took me 2 minutes to recover back
Hello forgive me for my bad english
Please help, I have a problem with my phone LGp760, I do a hard reset but when the phone restarts, I got this error :crying: I can't enter to the phone to change the setting and i can't install the system again because the usb debugging is disabled,
Try updating with LGMobile support tool, i dont think usb debugging matters in that or try flashing kdz with offline fix.
Help
YashdSaraf said:
Try updating with LGMobile support tool, i dont think usb debugging matters in that or try flashing kdz with offline fix.
Click to expand...
Click to collapse
i try it with offline fix but i have this problem "error: device not found" the driver is already installed
hafidonly said:
Hello forgive me for my bad english
Please help, I have a problem with my phone LGp760, I do a hard reset but when the phone restarts, I got this error :crying: I can't enter to the phone to change the setting and i can't install the system again because the usb debugging is disabled,
Click to expand...
Click to collapse
If unlocked bootloader,if set cwm,before starting any arhive to recovery,in updater-script paste the:
Code:
delete("/system/app/LGSetupWizard.apk")
delete("/system/app/LGSetupWizard.odex")
Sorry for my ENG
hafidonly said:
i try it with offline fix but i have this problem "error: device not found" the driver is already installed
Click to expand...
Click to collapse
3 options
1 If you're on stock JB and don't have CWM or other recovery installed, You can enter stock recovery with holding Vol- & Home & Power buttom. It'll show android with red regtamgle and you can use adb in that recovery to pull & push files.
2 If that don't work you can try to recover your phone using LG mobile support tool (in my signature)
3 If you want to do a offline flash. On JB firmware flash program don't recognize your phone. You should flash ICS u-boot/x-loader on your phone first using lelus tool. (again in my signature)
artit said:
3 options
1 If you're on stock JB and don't have CWM or other recovery installed, You can enter stock recovery with holding Vol- & Home & Power buttom. It'll show android with red regtamgle and you can use adb in that recovery to pull & push files.
2 If that don't work you can try to recover your phone using LG mobile support tool (in my signature)
3 If you want to do a offline flash. On JB firmware flash program don't recognize your phone. You should flash ICS u-boot/x-loader on your phone first using lelus tool. (again in my signature)
Click to expand...
Click to collapse
Think you i will try if not work i will ask your experience
Merci
Hi all!!
Yesterday i tried to install android 4.4 but the procces didnt succeed, it stuck at. LG boot logo. So i decided to restore my backup in ckockworkmod,it started the process then stopped at the phase "restoring /system" . I waited about a half hour, and because it didnt take the much time before, i took out the battery. I read somewhere that formatting the system partition in cwm could help, so i did that. Then i retried restoring my backup. It stuck at the same phase. Later i downloaded the official kdz, and decided to flash it. I could bring the phone in update mode, but the process stopped at 15% at lg update manager.
At the moment i can get into clockworkmod, but cant restore /system . The update mode is also okay. I dont know that fastboot works or not. I havent tried it yet. Please help me thanks in advance
@trapistasajt
You will need to get fastboot working and use lelus's fastboot script to flash the "u" and "x" loaders for the device and then perform the offline or online flash
http://forum.xda-developers.com/showthread.php?t=2292828
Also as you found out you cannot flash custom roms without ulocking the bootloader first and you cannot use the L9 CWM bootstrap recovery for Locked Bootloaders, too flash custom roms.
try this online flash methode with B2CAppSetup
http://forum.xda-developers.com/showthread.php?t=2085344
i had the same probleme and i fixed it .
My bootloader is unlocked. I tried the fast boot method, but it doesnt go further than "Waiting for omap...." . So, i couldnt go into fastboot (probably my fault). Yesterday i sent it to the service. If they notice that my varranty is void (because of the unlocked bl) and send it back, i will try it once more. I would be very thankful if someone could write a noob friendly-fastboot guide. As i read, lots of people are struggling with the same problem. Thanks in advance!!!
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
jufece said:
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
Click to expand...
Click to collapse
I installed the drivers but it didnt work
trapistasajt said:
I installed the drivers but it didnt work
Click to expand...
Click to collapse
what happened??
jufece said:
what happened??
Click to expand...
Click to collapse
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
trapistasajt said:
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
Click to expand...
Click to collapse
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
jufece said:
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
Click to expand...
Click to collapse
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
trapistasajt said:
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
Click to expand...
Click to collapse
It shows something about firmware ir will restore. Ir will flash the latestbfirmware from original carrier release.
For example i actuallybhave v20L but my original carrier only released v10a. It will restore to v10a
None of them works, other ideas?
This fastboot method worked for me in 5 min, pay close attention to the instructions and it works!
http://androidforums.com/optimus-l9-all-things-root/807569-guide-security-error-fix.html
Spent days with LG update tool which if you read the log has no url for files to download.
Good luck!
I got my phone back from the service. They didnt repair it, because my varranty is void. I tried the methods mentioned above.
First, I tried flashing kdz, (with the solution for post-jb problem), but i couldn't get into S/W mode, which was available before the service.
Second, since i couldn't load S/W mode, the LG upgrader wasn't successfull, too
Third, fastboot still not work.
I am sure, that im not the only person with this problem, since it happened during installing @artas182x 's JB 4.4 rom. Please @artas182x or somebody write a noob-friendly guide/suggestion which may help to unbrick my beloved phone. Thanks!!!!!
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
sadnblueish said:
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
Click to expand...
Click to collapse
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Joe_Live said:
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Click to expand...
Click to collapse
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Same issue here
Any Luck with your device?
stuck in Bootloop
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
My problem was solved by Huawei. I claimed my warranty!
To solve this issue use sp flash tool without batry
Sent from my HUAWEI G610-U20 using Tapatalk
Help
thesumanthapa said:
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
Click to expand...
Click to collapse
I have encountered the same problem Is there any solution
sadnblueish said:
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Click to expand...
Click to collapse
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
mobdanish said:
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
Click to expand...
Click to collapse
Over 2 years now and I probably have changed 4 phones. Don't remember. But to help you. you may try this:
http://forum.gsmhosting.com/vbb/f810/huawei-g610-u20-bootloop-problem-1776731/
my phone isn't working, every time i open my phone it says "unfortunately, dev stopped working". and there are too many viruses that keeps on downloading. any idea how to fix this? huawei-g610-U20
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
Solutions:
1. Boot into recovery (Power + VolUp) and restore last backup (I really do hope you have a backup). It should be enough to restore just boot image. Mine ended in eRecovery few days ago after messing with Magisk and I've successfully recovered my device from there
2. Download original firmware, extract it, boot into fastboot (obv., try fixing it first, but you've flashed TWRP so it must work for other stuff, too) and just reflash original boot image
3. Download original firmware, extract it, boot into fastboot and reflash original recovery, then try eRecovery (this will probably wipe all your data, though)
There are tons of manuals how to extract Huawei/Honor firmware images (even a nice little program to do it for you), so I'd suggest searching around for that SW instead of asking how.
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
what recovery do you have now?? can you access twrp? or you are left with emui recovery??
if you have emui recovery, just perform a dload flash
Looks like he solved it.
adriansticoid said:
Looks like he solved it.
Click to expand...
Click to collapse
We need his solution , the one he tried
gopinaidu77 said:
We need his solution , the one he tried
Click to expand...
Click to collapse
Let's wait for his post.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Let's wait for his post.
Click to expand...
Click to collapse
Its been long he replied. Omg ,what is going ?
Stop. Spamming. The. Thread. For. Points.