i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
I followed the guide to restore the original NVRAM/Bin but it still shows no baseband or IMEI upon restoring. What did I do wrong?
how to restore the nvram folder
keanu_ritz said:
i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
Click to expand...
Click to collapse
i have a copied my original lenovo a3000h nvram complete folder..then i paste n overwrite into root/data/ folder but after that i reboot the device n my simcard undetected.. please help n what should i do?
Cant I use the Mtk Droid Tools without rooting my device?
Nvram request...
any1 help me here...i need nvram backup of micromax canvas 4 A210... In which 3g is working without any problem...
ravi09 said:
any1 help me here...i need nvram backup of micromax canvas 4 A210... In which 3g is working without any problem...
Click to expand...
Click to collapse
Hi Ravi,
I have 2 canvas 4 A210 phones,
one is not turning ON and also not detected by computer which is on pure stock not even rooted.
second one is CM11 v0.19 but no GSM signal struggling from last one and half month to restore nothing worked. even after setting the GSM parameter.
If you have found the solution please let me know.
Thanks,
Shiv
First format ur mobile with sp tool than flash latest stock a210 rom .. But first take backup of imei n nvram with mtktool ...if everythings goes right than flash ur cm11 0.19 rom..
i lost my nvram and original rom
dear all
can you help me
my phone is ( Huawei Honor 3C -- model : H30-U10 )
i upgrade to kitkat without backup and then the imei is invalid.
what can i do ?
Captain, can you please help me upload a NVRAM backup for Acer Z205P please.
keanu_ritz said:
i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
Click to expand...
Click to collapse
first of all i wanna say thanks for this useful tutorial.
but i found some confusing step in this because of i'm noob.
1. i would like to ask you about how to activated usb debugging in case of my phone couldn't reach setting? it happen because in my phone, after i flashing new rom, there is some activity to login to "mi.account". i cpuldn't login because i " dont havesim card recognised" in other word, invalid imei.
so, i want restore backup IMEI in position custom recovery.
now.. give me tutorial how to activate usb debugging in twrp.
p.s. my phone : xiaomi redmi note 2
OnlyGreen said:
first of all i wanna say thanks for this useful tutorial.
but i found some confusing step in this because of i'm noob.
1. i would like to ask you about how to activated usb debugging in case of my phone couldn't reach setting? it happen because in my phone, after i flashing new rom, there is some activity to login to "mi.account". i cpuldn't login because i " dont havesim card recognised" in other word, invalid imei.
so, i want restore backup IMEI in position custom recovery.
now.. give me tutorial how to activate usb debugging in twrp.
p.s. my phone : xiaomi redmi note 2
Click to expand...
Click to collapse
Good afternoom, if my tablet doesn't pass the logo but I can reach fastboot mode, how can I backup de IMEI and nvram?, it remains that way after it got freezed and I restarted it with the power button.
hey i have canvas hd 116 and i flash it by aosb 4.4.4 rom bt i forgot about taking backup...so now i have face problem with imei and WiFi network....so how can i solve this problem plz help me out.............i cant use WiFi......i can start sim by manually inserting imei no but i cant turn of WiFi it automatically turns off...
Related
Can we use XDATools to backup and restore XDA II ROM? Or XDA II provide a way to do the ROM backup and restore?
vbexpert said:
Can we use XDATools to backup and restore XDA II ROM? Or XDA II provide a way to do the ROM backup and restore?
Click to expand...
Click to collapse
is there a way to enter Bootloader method for XDA II?
You can enter bootloader on xda ii via power+any direction button+reset. Word of warning, it will hard reset as well.
palmop said:
You can enter bootloader on xda ii via power+any direction button+reset. Word of warning, it will hard reset as well.
Click to expand...
Click to collapse
Does it have the option to backup and restore ROM? Thanks!
it has d2s command to dump rom to sd, but don't know the reverse...
s2d like on an ipaq ?
is that a raw command on terminal software?
maybe its the same on ipaq?
lets find out
didnt get the terminal software to work though
dunno witch
found this
Here's how:
1. First insert the formatted SD card to the healthy iPAQ. Connect the cradle/cable to your computer's serial port. Install the A/C adaptor to your cradle.
2. Prepare the healthy 39xx to enter DEBUG mode:
- press and hold button: power, contacts, and inbox, and do pin reset.
- if your iPAQ shown all-red COMPAQ display, with 'SERIAL' text above, then you're in the debug mode.
- sit the debugged iPAQ to the cradle.
2. Open hyper-terminal, make a new connection, using these setting:
- the COM port where the iPAQ is connected.
- 115,200 bps
- 8 databits
- no parity
- 1 stop bit
- NONE handshaking.
- Connect!
3. Once connected, hit once to show the prompt SER>
4. On prompt SER> type "?" for displaying all the commands avail.
5. On this process of ressurection, we'll gonna use only two command: "d2s" (device to storage) and "s2d" (storage to device).
6. type "d2s" and hit .
7. The ROM copying process will begun, and you'll see a 'progress bar'. This may take apprx. 10 minutes.
8. When it's finished, you'll see the confirmation on both of your hyper-terminal screen and your iPAQ.
9. Disconnect the hyper terminal session.
Now the resurrection steps:
1. Prepare your dead 39xx to debug mode.
2. insert the SD card (which is now already filled with the 39xx ROM)
3. start a session on your hyperterminal again (using the same setting as above).
4. once connected, hit once to shown the SER> prompt.
5. type "s2d"
6. Your iPAQ will display a warning that current ROM will be erased, press 'power' button to confirm.
7. Starting the process of erasing the ROM of your dead iPAQ. This will take apprx. 7-9minutes.
8. Once the erasing process is done, it will automatically re-write the ROM of your dead iPAQ with the NEW ROM from the healthy iPAQ. This process took much longer, apprx 15 minutes.
9. When the copying process' done, both of your iPAQ and hyperterminal will shown an OK confirmation.
10. Disconnect the hyperterminal session.
11. Unplug your iPAQ from its cradle, do a soft reset.
12. Your dead iPAQ's risen!
gonne TRY !!!!
ITS WORKING
downloading rom now from my phone for backup
ftp://ftp.hilgraeve.com/htpe/htpe63.exe
for direct terminal software download
** rom is now on my card.
but how to replace the rom with an english one.
you cant read the card anymore
There has to be a way to dump that SD to a file. For me I can go to my friend's house and dump his English ROM and put it on my MDA II, but for many others, they'll need a file. Let's focus on how to do this.
I got MDA II from germany couple of days ago, and have been stuck with the German language. I've been searching and seaching for English ROM for couple of days and still no luck.
Can someone PLEASE please please make an image of the English ROM of their XDA 2 and post it here.
Thanks in advance
I will post it, as soon as I can get my hands on it
we just need to find another xda2 with english rom
and then dump that one
and use the rom for you own
I need the German XDA II ROM (because I have a MDA II, but I have an O2 card).
Can anyone dump a German XDA II ROM please!?!
how do i make a backup/image of the ROM? please give me step by step instructions. Thanks.
Backup & Restore of ROM MDAII
Hi all,
to backup your ROM:
1) put your device in bootloader mode
2) connect via cradle
3) use any terminal (minicom) to connect to the used port (/dev/ttyUSB0)
- you should see something like 'USB>' or 'SER>'
4) put an SD Card into device
5) type d2s on command prompt
to restore your ROM:
1) put your SD-Card into device
2) put your device in bootloader mode
3) the device will ask you to press power to flash the rom
and how do we change the rom on that SD?
We cant read the files
its formated in a non standard way
How to backup the Radio Stack of MDAII??
are there any possibilities to backup and restore the radio stack using the bootloader method?
thanks a lot,
bio
akira Posted: Sun Nov 16, 2003 18:48 Post subject:
--------------------------------------------------------------------------------
and how do we change the rom on that SD?
We cant read the files
its formated in a non standard way
Click to expand...
Click to collapse
Did you tried with WinHex software?
It is not formatted in FAT/FAT32/NTFS, etc. Thus WinHex can't read it...
Hi, guys,
Yesterday, Huawei released Android 4.0 ICS DEMO for U8860(a.k.a. Huawei Honor), as always I applied this updated immediately. It works fine, although I didn't see much difference from Android 2.3.
Here is a question, Does anybody know how to root U8860 with Android 4.0 safely?
big thanks.
!
I am also new owner from huawei honor..best phone ever ! battery life extremely good ! my phone is on 2.3.5 arriwed and don't need to upgrade it immediately.
does anybody know how to root this phone ?
Thanx
hi,mirot
You may try the way in which people root huawei u8800
prettyyy said:
Hi, guys,
Yesterday, Huawei released Android 4.0 ICS DEMO for U8860(a.k.a. Huawei Honor), as always I applied this updated immediately. It works fine, although I didn't see much difference from Android 2.3.
Here is a question, Does anybody know how to root U8860 with Android 4.0 safely?
big thanks.
Click to expand...
Click to collapse
did you download the .zip file to upgrade to ICS?
!
unzip the file and copy to sdcard.make update manually on the phone
mirot said:
unzip the file and copy to sdcard.make update manually on the phone
Click to expand...
Click to collapse
all the links i came across to upgrade to ICS are all 'UPDATE.APP', no zip files.
Huawei doesnt have it on their site anymore. I was hoping you could mirror it or something.
BTW i tried rooting using the method for the U8800, does not work.
hello, we got Root, I can not insert a link (no rights), copy the post:
1. Set the wood on your computer.
2. We enter the engineering menu of the body. (*#*# 2,846,579 #*#*) further ProjectMenu - Background setting-Log setting - Logswitch - LOG on - turn on, return to the ProjectMenu - Damp & Log include all items (total 4 points). Exit and restart ProjectMenu of the body.
3. Connecting to a PC the "Settings" - "Applications" - "Unknown sources" - turn on, then "Quick" - disable, then "Development" - include "Debug on USB" and "left on"
4. On the PC, disable antivirus, run SuperOneClickv2.3.1. and in the upper left corner click "ROOT".
5. On the pop-up windows give the "OK", a window with a proposal where a register just turn it off.
6. The ending of the whole operation will be a few lines (about half the screen) at the end of the last word "OK"
7. Turn off SuperOneClickv2.3.1, then "Options" - "Applications" - "Development" - turn off the "Debug on USB" and "left on" turn on "Quick", disconnected from the PC, restart the body.
8. If done correctly then open desks and one of them will see the icon "Sueruser" versiya3.0.7.
9. Return to its original condition and value of LOG on Damp & Log
PS
A small addition to the previous post, namely, after the root note two folders on the SD card and bugreports sleeplog. Remove the contents. If they continue to be replenished, then go to step 2 do the engineering menu, and then claim 9. Restart the body, clean folder on your SD card.
!
mistic-tooth said:
hello, we got Root, I can not insert a link (no rights), copy the post:
1. Set the wood on your computer.
2. We enter the engineering menu of the body. (*#*# 2,846,579 #*#*) further ProjectMenu - Background setting-Log setting - Logswitch - LOG on - turn on, return to the ProjectMenu - Damp & Log include all items (total 4 points). Exit and restart ProjectMenu of the body.
3. Connecting to a PC the "Settings" - "Applications" - "Unknown sources" - turn on, then "Quick" - disable, then "Development" - include "Debug on USB" and "left on"
4. On the PC, disable antivirus, run SuperOneClickv2.3.1. and in the upper left corner click "ROOT".
5. On the pop-up windows give the "OK", a window with a proposal where a register just turn it off.
6. The ending of the whole operation will be a few lines (about half the screen) at the end of the last word "OK"
7. Turn off SuperOneClickv2.3.1, then "Options" - "Applications" - "Development" - turn off the "Debug on USB" and "left on" turn on "Quick", disconnected from the PC, restart the body.
8. If done correctly then open desks and one of them will see the icon "Sueruser" versiya3.0.7.
9. Return to its original condition and value of LOG on Damp & Log
PS
A small addition to the previous post, namely, after the root note two folders on the SD card and bugreports sleeplog. Remove the contents. If they continue to be replenished, then go to step 2 do the engineering menu, and then claim 9. Restart the body, clean folder on your SD card.
Click to expand...
Click to collapse
this is method only for 2.3.5 gingerbread and doesn't work with ICS !
but if you have bugreport in the phone also doesn't work on 2.3.5 gingerbread
i have also bugreport and cannot root the phone anymore ! sd card formated,also phone memory and bugreport is still inside !
---------- Post added at 01:30 PM ---------- Previous post was at 12:31 PM ----------
somebody have 2.3.5 rom for Honor with android market and gmail inside?please post link here
thanx
!
yeahhh,everything solved ! honor the best
mirot said:
somebody have 2.3.5 rom for Honor with android market and gmail inside?please post link here
thanx
Click to expand...
Click to collapse
Yea I think I my have found one..... Waiting for it to finish downloading if its the one we both seek I will post a link.
EDIT: trying this one now -
1.)Download the bootloader menu tool - recovery-v8.img 5.5 MB megauploadDOTcom/?d=GN3NFEWS
2.)Download this zip 2.3.6 Sorry I can't post links in my first few posts apparently. pm me will email link then someone with more posts can post link.
3.)Turn phone off, Hold down both the volume up AND the volume down keys without letting go also then press and hold the power button. After a while your whole screen should go PINK. your usb cable should already be plugged in and this should mount a usb drive on your computer that you can access. Open it. There will be a file in there called recovery.img , rename it to recovery.old, then copy the recovery-v8.img to this drive. Rename it to recovery.img. Pull out the battery and re-insert.
Boot the phone by pressing and holding only the volume up key and the power button. This should load you into the new recovery image. From here you can load the .zip file from the menu.
Phew.
Its good to have a working phone.
PS its a custom rom thats already rooted and has root explorer installed. NICE! Oh ad you can install google apps from google. just google gapps-ics-20111125-2.zip
n3mz1z said:
Yea I think I my have found one..... Waiting for it to finish downloading if its the one we both seek I will post a link.
EDIT: trying this one now -
1.)Download the bootloader menu tool - recovery-v8.img 5.5 MB megauploadDOTcom/?d=GN3NFEWS
2.)Download this zip 2.3.6 Sorry I can't post links in my first few posts apparently. pm me will email link then someone with more posts can post link.
3.)Turn phone off, Hold down both the volume up AND the volume down keys without letting go also then press and hold the power button. After a while your whole screen should go PINK. your usb cable should already be plugged in and this should mount a usb drive on your computer that you can access. Open it. There will be a file in there called recovery.img , rename it to recovery.old, then copy the recovery-v8.img to this drive. Rename it to recovery.img. Pull out the battery and re-insert.
Boot the phone by pressing and holding only the volume up key and the power button. This should load you into the new recovery image. From here you can load the .zip file from the menu.
Phew.
Its good to have a working phone.
PS its a custom rom thats already rooted and has root explorer installed. NICE! Oh ad you can install google apps from google. just google gapps-ics-20111125-2.zip
Click to expand...
Click to collapse
please PM me those link
i am eager to get my self a rooted ROM.
many thanks pal
n3mz1z said:
Yea I think I my have found one..... Waiting for it to finish downloading if its the one we both seek I will post a link.
EDIT: trying this one now -
1.)Download the bootloader menu tool - recovery-v8.img 5.5 MB megauploadDOTcom/?d=GN3NFEWS
2.)Download this zip 2.3.6 Sorry I can't post links in my first few posts apparently. pm me will email link then someone with more posts can post link.
3.)Turn phone off, Hold down both the volume up AND the volume down keys without letting go also then press and hold the power button. After a while your whole screen should go PINK. your usb cable should already be plugged in and this should mount a usb drive on your computer that you can access. Open it. There will be a file in there called recovery.img , rename it to recovery.old, then copy the recovery-v8.img to this drive. Rename it to recovery.img. Pull out the battery and re-insert.
Boot the phone by pressing and holding only the volume up key and the power button. This should load you into the new recovery image. From here you can load the .zip file from the menu.
Phew.
Its good to have a working phone.
PS its a custom rom thats already rooted and has root explorer installed. NICE! Oh ad you can install google apps from google. just google gapps-ics-20111125-2.zip
Click to expand...
Click to collapse
why when i connect phone to the pc after pink screen my sdcard and phone cant detect in the pc??
what i should do to be detected? and send me link ofcourse.. thxs
update:
i have succeed go into recovery mode but i cant install the zip file.. what i must load the ROM into sd card before?
!
If you have 2.3.6 firmware your phone will be NOT recognized on your PC by pink screen !!! By reason of lock on 2.3.6.
You can install Chinacom 2.3.5 firmware and use this procedure(pink screen) again,and will be OK.after that you can install any custom rom also 2.3.6 !
mirot said:
If you have 2.3.6 firmware your phone will be NOT recognized on your PC by pink screen !!! By reason of lock on 2.3.6.
You can install Chinacom 2.3.5 firmware and use this procedure(pink screen) again,and will be OK.after that you can install any custom rom also 2.3.6 !
Click to expand...
Click to collapse
ohh.. that's why i cant connect to the pc because i use 2.3.6 thxs for your information
anyone have link ginger 2.3.6 with market and gmail work? please give me link i need it immediately
!
here : multi language and with gmail and market enabled ! but not rootable !
http://depositfiles.com/files/zwb2nscyu
regards
Root Hauwei U8860 with ICS and Gapps
So I gave up on Gingerbread. I am now running ICS with Gapps.
I did it by the following steps.
1.) install the ICS demo provided by huawei
2.) Replace the recovery.img with the v8 one via the pink screen method mentioned in my previous post.
3.) download the gapps ics .zip to your sdcard and rename it to update.zip in the root of sdcard.
4.) Boot to recovery menu by holding power button and volume up button, then slect update zip, then chose the update.zip. once completed reboot.
5.) when you boot into ics login to google talk with your account first via 3g data not wifi data. then gmail.
6.) now market should work!
Also you can root ICS easy with any rooting tools. I used RootThat-v1.0.0
PS I emailed/pm'd the gingerbread rom to all who requested it. I found it unstable though.
!
no bro.newest version of ICS for Honor is with kernel 3.0.8 ! is pretty good but still not stable and on testing.it is rootable also with oneclickroot not only over pink screen.link what i give you that is very stable version of 2.3.6 but not rootable if you have "bugreport" inside phone,if not it is possible to root
regards
any ICS ROM's link? i found it very difficult on google
is this ICS build already stable on this phone?
n3mz1z said:
So I gave up on Gingerbread. I am now running ICS with Gapps.
I did it by the following steps.
1.) install the ICS demo provided by huawei
2.) Replace the recovery.img with the v8 one via the pink screen method mentioned in my previous post.
3.) download the gapps ics .zip to your sdcard and rename it to update.zip in the root of sdcard.
4.) Boot to recovery menu by holding power button and volume up button, then slect update zip, then chose the update.zip. once completed reboot.
5.) when you boot into ics login to google talk with your account first via 3g data not wifi data. then gmail.
6.) now market should work!
Also you can root ICS easy with any rooting tools. I used RootThat-v1.0.0
PS I emailed/pm'd the gingerbread rom to all who requested it. I found it unstable though.
Click to expand...
Click to collapse
are you already fix the camera flash, radio fm, and any bugs in ICS?
btw huawei already upload ginger new version ini international language so u can grab it ginger with gapps work tinyurl..com/77hurt3 (add the http and erase dot)
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Hi, the language is only english? Thanks.
stefanuccio12 said:
Hi, the language is only english? Thanks.
Click to expand...
Click to collapse
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Beoxoeb said:
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Click to expand...
Click to collapse
Thanks! I have try then ROM, but the touch button (back and menu) do not illuminate... sin
Anyway Good Job! I have finally rooted my device
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.::
10. ROOTED!
Click to expand...
Click to collapse
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
asan79onbashi said:
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
Click to expand...
Click to collapse
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
This didn't work for me on LG E430
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
gixy08 said:
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
Click to expand...
Click to collapse
I never had issues related with stopping processes on my e430, but if you got a proper rooting using this tutorial on the original firmware i will try it, thanks for sharing this method
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
AXD96 said:
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
Click to expand...
Click to collapse
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Beoxoeb said:
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Click to expand...
Click to collapse
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
odiad said:
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
Click to expand...
Click to collapse
Not yet, im very busy now, but when i have time i will give it a try.
Beoxoeb said:
Not yet, im very busy now, but when i have time i will give it a try.
Click to expand...
Click to collapse
Hello Beoxoeb, please report when you've tried.
Regards Odiad
Hi, it doesn't work for me. If i press power button + volume down, nothing happens and the phone boots normally.
Hi
Beoxoeb said:
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
Click to expand...
Click to collapse
Thanks but how do ispalnim instructions with downloads A that there is nowhere to write take along with one.Wou direction short measure links (enternet address).If you wish not want you to find a way to direct users to the right of XDA downloads A but obviously you do not want and would rather just something Namik yasno.Publish precise instructions with exact links please not this conundrum where we would suggest a link to thing .Thanks for your attention.
****Greetings!..
I found a way to root my LG e430 that doesn't requires flashing the ROM or Command Promt.The only ''problem'' is that has the chinise SuperUser but you only have to press the Right button in order to give you the permission...here is the method.
http://forum.xda-developers.com/showthread.php?t=2403230
Enjoy!
Sent from my rooted LG Optimus L3 II
nice
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Just made an acount to say thanks...works like a charm...I tryed all tutorials, even with the chinese root...no result, It didnțt detect my phone.
+ back and menu button work
Hello @Beoxoeb,
I wanted to ask you If with this root method you can move apps to the phones SD Card or at least uninstall system apps such as Google Chrome.Is that possible?
Sent from my LG Optimus L3 II
A little help..
I've managed to root my LG E430 with this tutorial, thanks for that , but I have a problem with my 'back and options' buttons, their light is gone... The 'home' button also, although it shows a signs of life sometimes (with some apps and sometimes on notifications).
So my questions are:
1. Is there a way to 'add' this settings to the system (cause my guess is they were deleted/misplaced from the system)?
- via android SDK on PC, file manager, or something else (just guessing )
2. Is there a KDZ file for the e430, the original one ?
- used for unroot or fetch the settings for the original one
---
Thanks again for the tutorial and thanks in advance for my questions,
dnisko
Help
beoxoeb said:
hello guys! I finally found the way to root this terminal without losing any functionality (home, menu, back buttons and led notifications working).
Steps:
1. Set your device on download mode (shutdown the phone, then press "on + volume down") and connect via usb on your pc
2. Download this file: M eg a.co . N z /#!agxrtzda!z0ni-g5eg9d-x9yewvckcfn8hpywvbex6ycop5mtqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install msxml 4.0 sp3 parser (msxml.msi)
4. Run kdz_fw_upd.exe
5. Set "type" on "3gqtc" and "ponemode" on "diag"
6. Select v10e_00.kdz from the folder that you downloaded
7. Click on "launch software update" and wait a few minutes
8. After it finished, put framaroot-1.6.0.apk on your sdcard or internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute framaroot, use gandaf exploit.
10. Rooted!
Click to expand...
Click to collapse
when i press launch it says phone not found it doesent even show on the my computer folder helllllllllllllllp :'(
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
Hi,
Nobody can help?
Please, I can't use my phone.
how to did you bring your lenovo phone back to life cause mine get stuck in boot logo
Invalid Imei
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
neocortex95 said:
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
Click to expand...
Click to collapse
it is possible to restore imei BUT in there is not only code but some other settings that will be not restored or taken by default values.
in my case i restored it but i cannot connect to GSM operator ((
please share the nvram with me for s820 thx in advance!
it's easy how to do it (contact me if any issues)
thx a lot
Solution of NVRAM.img and no-services Lenovo S820
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
This is the solution....thanks
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
How do you apply it, I have the same problem.
The bat file is not working, it says cannot find adb.exe.
I put the adb.exe at system32 folder along with the dll files and still bat is not working
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
hi dear
lenovo s820 imei
Your phone will fix the problem?
I also have this problem.
[Solved] Solution For Recover your IMEI For Lenovo S820
1) You must Root your Smartphone by Framaroot 1.8.1 (Apk for simple usein smartphone)
2) Install Root Explorer
3) Open Root Explorer and go to dev Folder and check pttycmd1 file
4) If "Pttycmd1" not exist ,copy that from "dev/radio" Folder and paste to "dev" Folder
5) Install Terminal Emulator (like cmd in windows but in Linux andorid)
6) open Terminal Emulator and enter "su" then enter (For super user Authentication)
7) in next line enter this codes
echo 'AT +EGMR=1,7,"IMEI_1"'> /dev/pttycmd1
echo 'AT +EGMR=1,10,"IMEI_2"'> /dev/pttycmd1
IMEI_1 , IMEI_2 : you must enter 15 digits for each (For Valid Number use your old IMEI Code and if u want check that in
"imei-number.com/imei-validation-check"
8) After Each line only Press Enter and nothing more
9) You must Restart Your Phone (not fast booting)
10) After Restart Press *#06# and enjoy your Entered IMEI
11) You can Backup your IMEI ID By Software like MobileUncle (Suitable For Chines Mobile like Lenovo)
12) Good Luck
Afshin.jazi
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
nice share,,,
solved s820...
does nvram.img file needed with secro-sign.img to retain lost sr.no and imei no mac
does nvram.img file needed alongwith secro-sign.img file to retain the lost imei no sr.no mac address and bluetooth settings in meditek 6737m device name moto c plus.
Hi i accidentally deleted my phone app the stock one on my galaxy note 4 because it kept crashing and I couldn't type in phone numbers. So I got a new one of Google play and the one I got worked so I Got carried away and deleted the stock phone app. Now I can't even make calls neither can i switch on mobile data. What's worse is when I was clearing app my phone space I deleted the mtp application my phone is SM -N910H please can a good Samaritan help me and give me a copy of these two I might not be in town for 2 weak and I might not be connected to wifi so please by Monday or by Tuesday. Please it's urgent I can't use mobile data or call anyone
Follow the steps I am giving you
This will install stock firmware on your device
Make sure to backup all your data before proceeding(maybe with sdcard if data connection doesn't works)
[WARNING:I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.DO IT AT YOUR OWN RISK]
Step 1. Download and install the drivers on your pc from here:
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
Step 2. Now Download the ODIN flash tool and extract the folder on your desktop.:
http://d-h.st/XEo
Step 3. Now Download the Stock Firmware on your desktop from here:
http://www.sammobile.com/firmwares/database/SM-N910H/
Once the download is complete extract the firmware file on your desktop.
Step 4. Now connect your phone to the PC with USB cable and run the ODIN.exe file on your desktop.
Step 5. Now click on the “AP” button and select the firmware file (tar.md5) that you extracted on step 3. Make sure Repartition is NOT checked
Step 6. After that click on the start button to run the flashing process on your Note 4.
Step 7. After the process is completed you will see the RESET! or PASS! message on ODIN screen, your phone will reboot now.
Done
Please press the thanks button if it helped you out
Regards milkyway3