Related
I own a LG-P765
I used LG's software updater and it decided to put on a useless Chinese version of android 4.0.4 with no play store
Need help putting it back
I tried hard resetting and it didnt help
I tried flashing with KDZ but the program kept on crashing
Need help BADLY!!!!!!!!!!
manniefabian said:
I own a LG-P768
I used LG's software updater and it decided to put on a useless Chinese version of android 4.0.4 with no play store
Need help putting it back
I tried hard resetting and it didnt help
I tried flashing with KDZ but the program kept on crashing
Need help BADLY!!!!!!!!!!
Click to expand...
Click to collapse
Try to recovery your phone by LG mobile support tool
1. Download LG mobile support tools from LG web site. http://www.lg.com/us/support-mobile/lg-P769
2. Boot your phone to SW upload mode
3. Start LG mobile support tool.
4. Connect your phone with usb cable. LG mobile support should detect your phone model. If not please reinstall LG usb drivers.
5. In LG mobile support tools, select "Customer support" > "Recover phone"
4. New dialog popup ask for IMEI or S/N. Your IMEI should already fill in textbox just click first button.
5. Wait for LG flash program to load kdz from their server and flash your phone. It should work.
Just put on the Chinese android!!!
All that did was put on the chinese android i need a way to flash it
manniefabian said:
I tried flashing with KDZ but the program kept on crashing
Click to expand...
Click to collapse
What do you mean "crashing"? What excatly happens?
Once i enter in the correct KDZ file i press start it says unpacking then the prgaram stops working
I have tried this on other computers also
If u can give me a step by step version on how to use the KDZ updater program that would help
My phone is the LG P765 or P760 running Android 4.0.4
anirion said:
What do you mean "crashing"? What excatly happens?
Click to expand...
Click to collapse
manniefabian said:
Once i enter in the correct KDZ file i press start it says unpacking then the prgaram stops working
I have tried this on other computers also
If u can give me a step by step version on how to use the KDZ updater program that would help
My phone is the LG P765 or P760 running Android 4.0.4
Click to expand...
Click to collapse
Step by step you find here: http://forum.xda-developers.com/showthread.php?p=36351786
You can also try to download again KDZ file, maybe file which you try to use is corrupted.
anirion said:
Step by step you find here: http://forum.xda-developers.com/showthread.php?p=36351786
You can also try to download again KDZ file, maybe file which you try to use is corrupted.
Click to expand...
Click to collapse
Thanks im gonna try it if it doesn't work is there any other way?
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
First, this method should work for all Optimus One variants. P500, P505, P506, P509, and a few others
Second, a couple corrections, if you don't mind...
Step 3: ... type down the serial number... This is incorrect. This should be IMEI number. IMEI and Serial are two different things.
Step 4: ... Emergency mode!! in a green background... Emergency mode has a Yellow background and "Emergency Mode" printed on the screen in Red.
Third,
When something goes wrong, the device will first attempt to boot to recovery. If it can't boot to recovery for whatever reason, then the device will reboot to fastboot mode. From here there are other options, not just KDZ. KDZ should be the last line of defense as it has bricked many Optimus One's and it's variants. If the device drivers had been previously installed correctly to a Windows PC, then fastboot.exe or any GUI tool for fastboot.exe can flash a recovery that can then be used to repair/replace the device's OS. Linux/Unix users don't need drivers to communicate with USB devices, only a 51-android.rules file and a fastboot executable for Linux/Unix.
Don't take what I've said the wrong way. I'm not trying to shoot your guide down. This is the kind of activity that is encouraged at XDA not discouraged I just wanted to inform you that there are other options.
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
karan.scorpion said:
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
Click to expand...
Click to collapse
hmm..did you try wipe data and wipe cache partition and re install g-apps??
shinobisoft said:
First, this method should work for all Optimus One variants. P500, P505, P506, P509, and a few others
Second, a couple corrections, if you don't mind...
Step 3: ... type down the serial number... This is incorrect. This should be IMEI number. IMEI and Serial are two different things.
Step 4: ... Emergency mode!! in a green background... Emergency mode has a Yellow background and "Emergency Mode" printed on the screen in Red.
Third,
When something goes wrong, the device will first attempt to boot to recovery. If it can't boot to recovery for whatever reason, then the device will reboot to fastboot mode. From here there are other options, not just KDZ. KDZ should be the last line of defense as it has bricked many Optimus One's and it's variants. If the device drivers had been previously installed correctly to a Windows PC, then fastboot.exe or any GUI tool for fastboot.exe can flash a recovery that can then be used to repair/replace the device's OS. Linux/Unix users don't need drivers to communicate with USB devices, only a 51-android.rules file and a fastboot executable for Linux/Unix.
Don't take what I've said the wrong way. I'm not trying to shoot your guide down. This is the kind of activity that is encouraged at XDA not discouraged I just wanted to inform you that there are other options.
Click to expand...
Click to collapse
Thanks for the corrections sir. its alright.. my mistake sir..
Serial number
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
andeedee said:
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
Click to expand...
Click to collapse
Is it the same IMEI number behind the battery?
apvm said:
Is it the same IMEI number behind the battery?
Click to expand...
Click to collapse
Hi. Yes it is the one one the LG sticker under the battery. I have tried it with the hyphens and without, and have tried the phone model as P500 and P500h.
Thanks
It work with the rom 4.4?
Gianlucafabris said:
It work with the rom 4.4?
Click to expand...
Click to collapse
It is running Android 2.3.3 (is that what you were asking?)
andeedee said:
Hi there, I'm a complete novice at this but giving it a go...I'm up to step three and have opened the original firmware folder and run the application, but whenever I type the serial number (or the IMEI number - have tried both) and hit "save" it says "Unsuccessful in connecting to server or phone information is wrong!"
Any tips to get through this step?
Thanks
Click to expand...
Click to collapse
uhm.... sir you probably need a internet connection for it to be able to work...
voltaire23 said:
uhm.... sir you probably need a internet connection for it to be able to work...
Click to expand...
Click to collapse
Yep. Thanks. I am using the same computer and internet connection that I am using to make this post, so definitely not the issue.
Will it make any difference that I am trying this from New Zealand? Is it country specific? Or should it just work no matter where you are?
andeedee said:
Yep. Thanks. I am using the same computer and internet connection that I am using to make this post, so definitely not the issue.
Will it make any difference that I am trying this from New Zealand? Is it country specific? Or should it just work no matter where you are?
Click to expand...
Click to collapse
''it just work no matter where you are'' ... it does everywhere sir.. ) :victory:
__
help ;(
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
Will this work for my lg l9? it says security error?
I tried to do this but with my lg l9 (security error)
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
I got this?
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
I get this? or is there a different way for a lg l9 security error?
I tried to do this but with my lg l9 (security error)
voltaire23 said:
REMEMBER: DO THIS AT YOUR OWN RISK..DO FOLLOW STEPS SO THAT YOU WONT ENCOUNTER ANY PROBLEMS.!
Thinking that your phone is bricked??
Ever wonder how to get the hell out of the ''Fastboot mode started udc_start()''..??
Worry not.. The help is here.. )
Note: *This usually happens when you flash something and failed.
*Don't worry your device is not fully bricked.. There are many ways to fix this..
*Before proceeding please make sure your phone is charged even if the backlight is always on while charging..
* Remember make sure LG UNITED (Driver of your phone) is already installed (to avoid PHONE WAS NOT FOUND)!!!!!!
*This will restore your Original Rom.
*This Works On All Variants Of Optimus One (LG-P500,LG-P505,LG-P506,LG-P509) and other few devices
*For the Prerequisites (Below)..
Prerequisites:
*KDZ Updater/Lg United
*Windows Pc/Usb cable
INSTRUCTIONS:
STEP 1:Download the prerequisites. Disable all LGE modems under modems from Windows device manager in
the control panel.. (Simply click start then type ''Device manager'' click it. then you will see there under MODEMS)
STEP 2:Exract the files..Open the KDZ Folder to your desktop and Right click on the "KDZ_FW_UPD.exe" and
click RUN AS ADMINISTRATOR.
STEP 3:Open the "Original firmware" folder and run it, type the serial number on the blank form entry. You can
Find you serial number on the back of you phone, remove the battery and look for the sticker attached to you phone.
If you fail to launch this software, you will have to install net. framework 4.0, just open your browser and type
NET.framework 4.0. Download it and install. After this you are able to run the software.After you type down the serial
number of your device click save and just save it on you DESKTOP. Wait until it is finished. This takes some time.
Internet connection needed as this software is downloading the ''KDZ file'' needed for the "KDZ_FW_UPD.exe".
STEP 4: Now lets go to your phone,press and hold both the back(return) button and the volume up button and
simultaneously connect the USB cable.. (The phone should light up and say Emergency mode!! in a green
The phone should light up and say Emergency mode!! in a GREEN/YELLOW background. (if not don't continue...)
STEP 5:After the download lets go back to "KDZ_FW_UPD.exe" .. Follow this settings... TYPE:3GQCT
PHONE MODE: DIAG Select the cab file (the one you downloaded ''KDZ file'' located at DESKTOP) The version
will depend on the ''KDZ file'' you downloaded. EX: (mine is V10F_00.kdz so the version will be V10F_00) after this
click "LAUNCH SOFTWARE UPDATE'' THIS WILL TAKE SOME TIME..... WAIT FOR IT....
For most of you it would probably say PHONE WAS NOT FOUND!..To avoid this please make sure you have
follow my note written above..
STEP 6:DONE... ITS ALL FIX NOW.. YOUR PHONE WILL REBOOT NORMALLY WITHOUT THE
'FASTBOOT MODE STARTED UDC_START()' :good: :highfive:
I got this?
STEP 7:AND FINALLY.... ONE MORE STEP.... PRESS THE "THANK" BUTTON IF I HELPED YOU .:fingers-crossed:
CREDITS:
@XDA DEVELOPERS For the awesome ''original lg firmware'' !! )
Click to expand...
Click to collapse
I get this? or is there a different way for a lg l9 security error?
help ;(
karan.scorpion said:
Thanks a lot. You really saved my phone. Worked like a charm. My device is back to life and working good
But some apps (play store, maps, etc) are shown as broken as I had earlier moved them to a second partition on my SD card.
I tried downloading play store apk, maps apk and tried to install, but installation is a failure
Is there any way to restore these apps?
Click to expand...
Click to collapse
It says my phone is not found?? Everytime i plug in my phone into s/w upgrade (download moad) on the device manager it says lge mobile modem?
swaggyp said:
Will this work for my lg l9? it says security error?
Click to expand...
Click to collapse
Im not sure.. but I think it will not work on p760. Sorry for late reply sir.
Help help pleaseee
I also have a problem like this, and at the same bootloop "fastboot mode started udc_start ()". So I followed the tutorial as you post. It's just that there is a problem at the last moment, that is the error message by KDZ (like in the picture), whereas in the log is written "FINISHED" but instead restart my phone to fastboot mode (after previously being in emergency mode) and nothing happened.
Earlier after I remove the error message, there is a new log message after the "FINISHED". Is there someone who can give me help? :angel::angel::angellease !!! Until now my LG still brick do not know how what I can do.......:crying::crying::crying::crying:
How to put into download mode
1st thing download the zip in the linkhttp://d-h.st/6Wp
Install:
1. Install the LG drivers.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
9) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
10) Click the DLL box and choose the dll file from above for you phone model.
11) Click the S/W box and select the firmware file with .tot extension.
12) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
13) Power off and place on dock when lg screen comes on swipe from button left to top right
Your LG G Watch will restart showing firmware installation progress in percent (%).
When all is done
I will post more videos and pics later
Nice job D -Fuse.........
Sent from my: T- Mobile LG G3
this is huge!!
ptesmoke said:
this is huge!!
Click to expand...
Click to collapse
Working with my buddy on recovery too. 1st built bricked tho lol
D-FUSE said:
Working with my buddy on recovery too. 1st built bricked tho lol
Click to expand...
Click to collapse
soft brick I would assume...lgflashtool should save damn near most bricks...
ptesmoke said:
soft brick I would assume...lgflashtool should save damn near most bricks...
Click to expand...
Click to collapse
Yeah just lg screen I just fastbooted the stock recovery to fix it. Btw if you do soft brick hit the reset button to power off and throw on the dock real quick and swipe
D-FUSE said:
Yeah just lg screen I just fastbooted the stock recovery to fix it. Btw if you do soft brick hit the reset button to power off and throw on the dock real quick and swipe
Click to expand...
Click to collapse
Love the swipe nice find
So where are the LG drivers..Last night I was all over that site since my pc wouldnt install drivers properly for the watch and the only thing tI found available to download is the documentation...
Also, running the LG tool thingy...threw up flags in Norton and it quarantined the file lol
Tower1972 said:
So where are the LG drivers..Last night I was all over that site since my pc wouldnt install drivers properly for the watch and the only thing tI found available to download is the documentation...
Also, running the LG tool thingy...threw up flags in Norton and it quarantined the file lol
Click to expand...
Click to collapse
http://oceanhost.eu/uvriaayam4sz/LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe.html
You can find lg drivers there and turn off antivirus the tool isn't a virus you'll be
D-FUSE said:
http://oceanhost.eu/uvriaayam4sz/LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe.html
You can find lg drivers there and turn off antivirus the tool isn't a virus you'll be
Click to expand...
Click to collapse
Oh I know..just wanted to toss that there and let ya know..thanks for the link.. The LG site is basically useless for the watch
Tower1972 said:
Oh I know..just wanted to toss that there and let ya know..thanks for the link.. The LG site is basically useless for the watch
Click to expand...
Click to collapse
Lg site is useless for everything ?
deleted for now..trying something
Thanks for posting this! My device was among those that had a messed up partition table and this seems to have solved it!
Hi,
after installing lg drivers, no com41 found on my pc.
only "lg mobile composite usb device"
what is the right driver?
edit: changed manually to "LGE Android Plattform USB Modem"
edit: confirm working with "LGE Android Plattform USB Serial Port (Com41)" and "LGE Android Plattform USB Modem" on Com5
regards
starbase64
starbase64 said:
Hi,
after installing lg drivers, no com41 found on my pc.
only "lg mobile composite usb device"
what is the right driver?
edit: changed manually to "LGE Android Plattform USB Modem"
edit: confirm working with "LGE Android Plattform USB Serial Port (Com41)" and "LGE Android Plattform USB Modem" on Com5
regards
starbase64
Click to expand...
Click to collapse
You have to change it in device manager on the lg modem in Advanced tab
yes, i post a Screenshot later today.
starbase64 said:
yes, i post a Screenshot later today.
Click to expand...
Click to collapse
Sorry my data is being throttled right now and I can't see the pic
D, Thank you, hopefully you'll be my saviour. But I'm at a bit of a loss... Does anyone happen to have the lg drivers?
And, the instructions in the op skip from step 3 to 7.i feel like im missing something.
Any help would be appreciated as I'm stuck in a perpetual bootloop with no way to enable debugging...
Sparks639 said:
D, Thank you, hopefully you'll be my saviour. But I'm at a bit of a loss... Does anyone happen to have the lg drivers?
And, the instructions in the op skip from step 3 to 7.i feel like im missing something.
Any help would be appreciated as I'm stuck in a perpetual bootloop with no way to enable debugging...
Click to expand...
Click to collapse
https://www.dropbox.com/sh/zuwmht5g5d1lss6/AABA3I3RR_TL2MvUB4uMoVZ8a?dl=0
Should be in my drop box folder
Thank you sir
Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!
LG G6 Unbrick
First Thing First: If you try this method, I nor anybody else is responsible
for any further damage done to your phone.
!!!YOU CANNOT FLASH THIS TO AN H872!!!
If you have destroyed the partitions, you are going to have to try Method 2 (Second Post)
Models Confirmed: LS993, H871, H870ds, H870, AS993
READ THE ENTIRE GUIDE OVER BEFORE STARTING
Files needed:
All Here : https://drive.google.com/open?id=1OQnP2tu7hqlR0tbEdxLnzj_xOx12Ndvu
CLICK “DOWNLOAD ALL” IN TOP RIGHT CORNER
Working KDZ for your model : https://lg-firmwares.com/
UNBRICK PROCEDURE:
(DO NOT CONNECT PHONE UNTIL STEP 6)
Step 1) Download Files ---> Duh, lol
Step 2) Install QDLoader Driver (Select the driver for your system, 32 or 64-bit)
Use The new Signed driver.
Step 3) Extract AS993 to a folder. Any folder will work.
Step 4) Copy FireHose to same folder as AS993.
Step 5) Extract Qualcomm_Flash_Image_Loader_v2.0.1.9 to any folder.
Step 6) Start QFIL.
Under “Select Build Type” Select “Flat Build”
Under “Select Programmer” click “Browse”
Browse to the AS993 folder you created earlier and select the Firehose, hit open
In the Title Bar, click Configuration ->FireHose Configuration
Uncheck every checkbox, choose “Sahara” in Download Protocol dropdown, and “ufs” in
Device Type dropdown
Hit OK
Under “Select Flat Build” click “Load XML”
Browse to AS993 folder and select every rawprogram XML and hit open.
A windows will pop up asking to select Patch XML, Select every Patch XML, and hit open.
Connect Phone and click Download
If you encounter an error, try to reboot the phone and try download again
(Hold Vol Down + Power until you see COM port disappear and show up again)
Wait for download to finish.......
Phone will reboot to Fastboot
Step 7) Install LGUP_Store_Frame_Ver_1_14_3
Step 8) Extract LGUP Patch rar to rogram Files:\LG Electronics\LGUP
Put Phone into Download Mode (Unplug Phone → Turn phone off → Hold Vol Up → Plug Phone In)
Step 9) Run LGUP
In Model List window choose your phone and click Select
Under “Process” Select “Partition DL”
Under “File Path” to the right of “Bin File” click the button with 3 periods
Select your working KDZ
Click Start
A window will pop-up with partitions. Check select all, and then OK
Another window will pop-up explaining which partitions will change, click Yes
Wait for Flash to complete.......
!!!AFTER RESTART, YOU MUST FACTORY RESET!!!
To Perform Factory Reset Do The Following:
HOLD VOL DOWN + POWER, AS SOON AS YOU SEE BOOT SCREEN, RELEASE POWER BUTTON FOR A MOMENT, THEN CONTINUE HOLDING POWER AND VOL DOWN.
!!!DO NOT RELEASE POWER OR VOL DOWN BUTTONS UNTIL FACTORY RESET MENU APPEARS!!!
Use VOL UP\DOWN to choose to complete Factory Reset, then hit Power Button to perform Factory Reset.
CONGRATULATIONS! YOUR PHONE IS NOW UNBRICKED!
ScreenShots to Come, and Edits to be made.
Edit: H870ds, H870 and AS993 added to working models
Removed old drivers from Google Drive for simplicity.
Reserved
Thank bro
LGM-600l
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Is us988 work?
jascharichter said:
Is us988 work?
Click to expand...
Click to collapse
Although it has not been tested, there is no reason it shouldn't work. The worse that could happen is you're stuck in the same situation.
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Yep. Have at it. But, like always, I don't recommend purposely bricking.
I should mention that you don't need to use the xml stuff.
In QFIL in one of the top menus, there's a partition option, where it reads the gpt from the phone and you can select them and flash individual files. So you can flash directly bootloader
or whatever you need from your proper kdz source.
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
inbox me
Dylan110494 said:
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Click to expand...
Click to collapse
inbox me inbox me
jthein1989 said:
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
Click to expand...
Click to collapse
I'm sorry. I have been extremely busy lately. I will let you know when I get them done.
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Did you try it yet?
I'm also trying to fix a dead Canadian H873 (Videotron Carrier). Had tried my hand in the past at creating the patch.xml and rawprog0.xml (one method had me peek at the gpt files using an excel/libreoffice spreadheet) but failed for various reason also not having a proper programmer file didn't help any.
For those that encounter issues with either the programmer file failing or getting sahara fail FHLoader, something like cannot find system file try this:
1. Make sure to reboot phone and hit download to phone in QFIL right away. On my device sahara seemed to be timing out quickly.
2. For the second error using the QFIL included with QPST 2.7.474 fixed it.
Sadly i tried to refresh the phone using the backup files i was given with it but now it doesn't get detected. Holding power button the phone vibrates and nothing else happens. Tread lightly.
So good news the programmer file works (tried it on a H873 Videotron variant), bad news do it right the first time or else.
Time to start searching for a way to force it back into edl.
draekko said:
Time to start searching for a way to force it back into edl.
Click to expand...
Click to collapse
To clarify i used a backup of the files i had on hand for the device and not the files provided by OP.
Hi everyone, I have just bricked my G6, hard brick I think ( does not charge, cant get into download mode, cant hard reset either, only show Qualcomm qloader 9008"). This happened after I tried cross flashing it from LS993 to H872 ( I now know that a NO NO ). Can someone here help me on how to get it back to life ? I ve read quite a lot of different topics but the more I research the more confused I am. Some say I need to restore to stock firmware, but there is no stock firmware for LS993... Any help would be greatly appreciated and I hope you have a very great day
Read my method, download the files, read it again, and follow the steps.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
I did but I am still so confused. Can you please tell me which firmware should I download and the firehose to use too. I think I understood most of the post here, except those 2 things: kdz and firehose.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
---------- Post added at 08:53 AM ---------- Previous post was at 08:39 AM ----------
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
Hi!
I am trying to follow the steps shown but my computer do not recognize my H870 in "select" port :/
any idea?
thank you very much