How to put into download mode
1st thing download the zip in the linkhttp://d-h.st/6Wp
Install:
1. Install the LG drivers.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
9) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
10) Click the DLL box and choose the dll file from above for you phone model.
11) Click the S/W box and select the firmware file with .tot extension.
12) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
13) Power off and place on dock when lg screen comes on swipe from button left to top right
Your LG G Watch will restart showing firmware installation progress in percent (%).
When all is done
I will post more videos and pics later
Nice job D -Fuse.........
Sent from my: T- Mobile LG G3
this is huge!!
ptesmoke said:
this is huge!!
Click to expand...
Click to collapse
Working with my buddy on recovery too. 1st built bricked tho lol
D-FUSE said:
Working with my buddy on recovery too. 1st built bricked tho lol
Click to expand...
Click to collapse
soft brick I would assume...lgflashtool should save damn near most bricks...
ptesmoke said:
soft brick I would assume...lgflashtool should save damn near most bricks...
Click to expand...
Click to collapse
Yeah just lg screen I just fastbooted the stock recovery to fix it. Btw if you do soft brick hit the reset button to power off and throw on the dock real quick and swipe
D-FUSE said:
Yeah just lg screen I just fastbooted the stock recovery to fix it. Btw if you do soft brick hit the reset button to power off and throw on the dock real quick and swipe
Click to expand...
Click to collapse
Love the swipe nice find
So where are the LG drivers..Last night I was all over that site since my pc wouldnt install drivers properly for the watch and the only thing tI found available to download is the documentation...
Also, running the LG tool thingy...threw up flags in Norton and it quarantined the file lol
Tower1972 said:
So where are the LG drivers..Last night I was all over that site since my pc wouldnt install drivers properly for the watch and the only thing tI found available to download is the documentation...
Also, running the LG tool thingy...threw up flags in Norton and it quarantined the file lol
Click to expand...
Click to collapse
http://oceanhost.eu/uvriaayam4sz/LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe.html
You can find lg drivers there and turn off antivirus the tool isn't a virus you'll be
D-FUSE said:
http://oceanhost.eu/uvriaayam4sz/LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe.html
You can find lg drivers there and turn off antivirus the tool isn't a virus you'll be
Click to expand...
Click to collapse
Oh I know..just wanted to toss that there and let ya know..thanks for the link.. The LG site is basically useless for the watch
Tower1972 said:
Oh I know..just wanted to toss that there and let ya know..thanks for the link.. The LG site is basically useless for the watch
Click to expand...
Click to collapse
Lg site is useless for everything ?
deleted for now..trying something
Thanks for posting this! My device was among those that had a messed up partition table and this seems to have solved it!
Hi,
after installing lg drivers, no com41 found on my pc.
only "lg mobile composite usb device"
what is the right driver?
edit: changed manually to "LGE Android Plattform USB Modem"
edit: confirm working with "LGE Android Plattform USB Serial Port (Com41)" and "LGE Android Plattform USB Modem" on Com5
regards
starbase64
starbase64 said:
Hi,
after installing lg drivers, no com41 found on my pc.
only "lg mobile composite usb device"
what is the right driver?
edit: changed manually to "LGE Android Plattform USB Modem"
edit: confirm working with "LGE Android Plattform USB Serial Port (Com41)" and "LGE Android Plattform USB Modem" on Com5
regards
starbase64
Click to expand...
Click to collapse
You have to change it in device manager on the lg modem in Advanced tab
yes, i post a Screenshot later today.
starbase64 said:
yes, i post a Screenshot later today.
Click to expand...
Click to collapse
Sorry my data is being throttled right now and I can't see the pic
D, Thank you, hopefully you'll be my saviour. But I'm at a bit of a loss... Does anyone happen to have the lg drivers?
And, the instructions in the op skip from step 3 to 7.i feel like im missing something.
Any help would be appreciated as I'm stuck in a perpetual bootloop with no way to enable debugging...
Sparks639 said:
D, Thank you, hopefully you'll be my saviour. But I'm at a bit of a loss... Does anyone happen to have the lg drivers?
And, the instructions in the op skip from step 3 to 7.i feel like im missing something.
Any help would be appreciated as I'm stuck in a perpetual bootloop with no way to enable debugging...
Click to expand...
Click to collapse
https://www.dropbox.com/sh/zuwmht5g5d1lss6/AABA3I3RR_TL2MvUB4uMoVZ8a?dl=0
Should be in my drop box folder
Thank you sir
Related
I was wondering how to this.
I was flashing Killjoy's performance scripts (see http://forum.xda-developers.com/showthread.php?t=2411161). After flashing the file and choosing to reboot, for dumb reasons I chose to disable recovery flash when it asked to reboot. Now, when I go to LG setup, once I'm done, I get the message that "lg setup wizard has stopper working" and loops me back to the start of the setup. Please help!:crying:
I know L9 is virtually unbrickable. I just need to be pointed in the right direction and I know I can bring it back!
Edit: Issue resolved!
Did you by any chance uninstall it using titanium backup or similar? Try to get a logcat.
Sent from my LG-P760 using xda app-developers app
I guess he can't use none of the applications as he is stuck in the wizard. Try reflasing a stock ROM using kdz: http://forum.xda-developers.com/showthread.php?t=2085344
SkarlosBME said:
I guess he can't use none of the applications as he is stuck in the wizard. Try reflasing a stock ROM using kdz: http://forum.xda-developers.com/showthread.php?t=2085344
Click to expand...
Click to collapse
Yea, this is the case. Can't get out of it. I really don't know how in the world did it uninstall itself. I didn't use Titanium Backup at all. After flashing the killjoy zip file, I chose to reboot. I then got a warning:
"ROM may flash stock recovery on boot. Fix? THIS CAN'T BE UNDONE" I then get 3 options to chose from: "No", "Yes - Disable recovery flash, "++Go Back++
I chose yes, and then all went haywire. Is there a way I can determine my phone's connection type via computer? I tried flashing V20D using the KDZ offline method, but it won't progress. It says "Phone not connected." Last I recall, I left the connection on media sync (MTP, I think it's its acronym). Since I'm on JB, I know it needs to be in LG Software Mode.
I have faced this issue too, even if I entered into SW Upgrade mode manually, KDZ did not detect my phone :/
However, I had success using the official LG updater software (connected my phone in SW upgrade mode).
SkarlosBME said:
I have faced this issue too, even if I entered into SW Upgrade mode manually, KDZ did not detect my phone :/
However, I had success using the official LG updater software (connected my phone in SW upgrade mode).
Click to expand...
Click to collapse
Was your phone recognized by your computer? Because mine isn't. Think you can tell me more or less the steps you took to make it work?
Here's what I've tried so far:
1. downloaded most updated LG drivers
2. downloaded official LG mobile support tool
3. ran it, no effect.
4. downloaded LG pc suite, based on troubleshooting.
5. tried lg mobile support tool again, no good. Said connect PC to internet (???)
6. tried LG mobile support tool from shtttps from offline flash method, no good.
7. Put phone on SW upgrade mode (removed battery, volume up, put battery back in) and retried offline flash method again, halts at 15%. Says that phone isn't connected. It was set on DIAG since it's JB software.
8. Tried recovery update, but phone isn't recognized even if I put IMEI number in.
Thanks!
Flash a ics kdz... should work..
Sent from my LG-P769 using XDA Premium HD app
jbonilla51 said:
...
5. tried lg mobile support tool again, no good. Said connect PC to internet (???)
...
Click to expand...
Click to collapse
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
SkarlosBME said:
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
Click to expand...
Click to collapse
I forgot about that! Tried it, and the official tool worked excellent! Phone was able to go through setup wizard without a problem! Thanks a lot, man! Hitting the thanks button now!
:good::good::good:
SkarlosBME said:
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
Click to expand...
Click to collapse
could you please elaborate on this. hosts files on Windows? I'm having similar problem with new lg k7 no kdz and for some reason this phone has no recovery at all. button combo will perform a factory reset with no prompt butt no menu options at all. and phone getting no dev love at all. it's very touchy. like it'll brick if you look at it the wrong way
I had nothing to do with this. All thanks should go to Autoprime and anyone else involved. The link to his original thread in the regular LG G3 forum is below.
http://forum.xda-developers.com/showthread.php?t=2776198
Links & tips
samg77 said:
These are the usb drivers needed to root. They are the Verizon specific drivers for the LG G2 direct from the LG website. LG doesn't have G3 specific drivers, but these do work. Change your USB connection after your cable is connected from MTP, to Internet connection, then select ethernet. Once you do that you will have about 6 yellow ! under Windows device manager, until you install the following drivers. Once you install the drivers all the !'s will go away, and you are now ready to run the IOROOT batch file and have your phone rooted.
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427
Click to expand...
Click to collapse
Just in case anyone is having issues with drivers for windows.
markfm said:
On a Windows PC, here is an alternate link to get the VZW driver, in a .msi installer: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
The link came from here: http://www.mylgphones.com/download-and-install-the-usb-drivers-for-lg-g3-on-windows-and-mac.html
DL the .zip, unpack the .msi, run it. It runs really fast, nothing obvious happens, but it does install the driver.
Click to expand...
Click to collapse
Just rooted 2 verizon G3's with win7 using ioroot and the G3 drivers provided the thread. Read the directions and follow them closely.
eraursls1984 said:
I had nothing to do with this. All thanks should go to Autoprime and anyone else involved. The link to his original thread in the regular LG G3 forum is below.
http://forum.xda-developers.com/showthread.php?t=2776198
Click to expand...
Click to collapse
These are the usb drivers needed to root. They are the Verizon specific drivers for the LG G2 direct from the LG website. LG doesn't have G3 specific drivers, but these do work. Change your USB connection after your cable is connected from MTP, to Internet connection, then select ethernet. Once you do that you will have about 6 yellow ! under Windows device manager, until you install the following drivers. Once you install the drivers all the !'s will go away, and you are now ready to run the IOROOT batch file and have your phone rooted.
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427
That link works great for the root file, but it wasn't 100% crystal clear on which usb drivers to get. I downloaded 2 sets of usb drivers that were incorrect (the generic usb, and then the verizon) neither worked, until I went directly to the LG website and downloaded that file. Figured I'd post a direct link incase some else had the same issue I did, and wasn't sure which usb driver would work. Had they posted this link it would have saved me about an hour of trying to get wrong drivers to work.
samg77 said:
That link works great for the root file, but it wasn't 100% crystal clear on which usb drivers to get. I downloaded 2 sets of usb drivers that were incorrect (the generic usb, and then the verizon) neither worked, until I went directly to the LG website and downloaded that file. Figured I'd post a direct link incase some else had the same issue I did, and wasn't sure which usb driver would work. Had they posted this link it would have saved me about an hour of trying to get wrong drivers to work.
Click to expand...
Click to collapse
Yeah, I saw a few links as I was reading over the last few pages yesterday. I'll add this to the OP to make it easier for everyone. I went and checked the phone out yesterday but didn't get it because I saw the development sections were completely empty in the Verizon G3 forums.
Worked fine for me. The toughest part was getting it into debug mode (switch to internet connection instead of MTP).
Sent from my VS985 4G using Tapatalk
NM I am a moron.. carry on lol
eraursls1984 said:
I went and checked the phone out yesterday but didn't get it because I saw the development sections were completely empty in the Verizon G3 forums.
Click to expand...
Click to collapse
They just created these forums yesterday...
So, ioroot doesn't need Windoze? I can just run the shell script from my Arch Linux terminal...
On a Windows PC, here is an alternate link to get the VZW driver, in a .msi installer: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
The link came from here: http://www.mylgphones.com/download-and-install-the-usb-drivers-for-lg-g3-on-windows-and-mac.html
DL the .zip, unpack the .msi, run it. It runs really fast, nothing obvious happens, but it does install the driver.
It is what I used last night when I rooted.
I followed the instructions provided in the other thread (and re-posted here) and it worked just fine. My Verizon G3 is rooted and working great with the G3 TweaksBox.
enable Tethering
Hi , does anyone know how to enable tethering after rooting? ( I mean remove the provisioning)
See: http://forum.xda-developers.com/showthread.php?t=2812305
You have to reset the link name and/or password each time you enable the hotspot, but it definitely works.
Does anyone have the stock kdz file. I attempted to change my screen lcd size in build.prop to 400 and now systemui crashes every time i boot. i have no way to undo the change as i cant adb shell without putting the phone in internet mode to enable debugging
kwkw480 said:
Does anyone have the stock kdz file. I attempted to change my screen lcd size in build.prop to 400 and now systemui crashes every time i boot. i have no way to undo the change as i cant adb shell without putting the phone in internet mode to enable debugging
Click to expand...
Click to collapse
fixed... with factory image tot file
Worked perfectly doing it manually on osx.
Sent from my VS985 4G using XDA Free mobile app
kwkw480 said:
fixed... with factory image tot file
Click to expand...
Click to collapse
Where did you find the Verizon LG G3 tot file?
Sent from my VS985 4G using XDA Free mobile app
Hey guys, I have no idea why I cannot get this figured out. But the drivers file, doesn't open I can't find a program to install them ect. Am I missing something here or over looking something? I am really getting frustrated. Thanks!
Kutster - if you are on Windows, try the drivers I linked to in post 9.
Get the.zip, unpack, run the .msi file to install them.
mikec86 said:
Where did you find the Verizon LG G3 tot file?
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
It took a little googling but I found it. Its here on xda I'm not home now to give you the direct link but search the LG g3 forms not device specific and you will find it
Thank you Markfm! Seems I missed your post. I'm by no means new to this and I couldn't figure out why drivers could be so hard to figure out. Haha
Sent from my VS985 4G using XDA Premium 4 mobile app
Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!
i hard brick my phone yesterday. trying to flash bootloader with flashfire. (the lazy way) thats what i get. anyways could not turn on n6p, tried charging it for a couple of hours, try holding power button for 30 seconds, try power + volume . tried holding all buttons. nothing work.. read some threads saying its done. look for new phone or send to get repair. then i found tenfar thread. long story short. i used some of tenfar info and rwj5279955.. so big thanks to these two users
here is what i did to get my N6p to turn back on.. brick by bootloader.. this is my first how to .. bear with me. please.
you will need the following https://drive.google.com/file/d/0By19rrbnQfVUVFZEVUZqQzY1RWs/view?usp=sharing
Qualcomm drivers
QFIL software
3 files, patch0, prog_emmc_firehose, rawprogram0 .. for this to work
1. install qualcomm drivers, Connect phone to pc, open Device Manager. if you see under com port Qualcomm USB loader or something along those lines. your good, go to step 2. if not disconnect phone hold power button for 10 seconds, wait for 5 seconds connect phone to pc. check if in com ports you see Qualcomm drives. if you can not get qualcom drivers on com port. just stop. its not going to work..
2. extract the three files. in a folder somewhere easy to remember.
3. install the QFIL software, . once install run QFIL.
4. in QFIL software
if qualcomm driver are found it will say on top of QFIL software Qualcom USB loader 9008
Select Build Type: click Meta Build
Select Build :: patch0 ... if for some reason patch0 doesnt work try rawprogram0
Select Programmer:: pro_emmc_firehose
hit download ...if the blue bar get to half way mark your golden. its going to always fail. the trick is to get the blue bar at least half ways. then you disconnect phone, hold power button, it should turn on.. then you ADB what ever you need to do.
for those that get the fail right away.. while phone connected to pc, hold power button until drivers disappear from device manager.. then disconnect phone, wait for 5 seconds, hold power button, for 10 second,.. wait for 5 seconds .. then connect phone back to pc, wait for device manager to see drivers.. then hit the download button . do this part over and over again ..until it works..
sorry for this horrible guide.. it work for me.. hope it works for you..
That's a lot to take in! Is this for windows only then not Linux? Bootloader and radio does have to be flashed via fastboot
DEVILOPS 007 said:
That's a lot to take in! Is this for windows only then not Linux? Bootloader and radio does have to be flashed via fastboot
Click to expand...
Click to collapse
Windows
Lw00d said:
Windows
Click to expand...
Click to collapse
Luckily there's already alternative for linux
Hello thank you so much for your guide, currently trying to unbrick my nexus 6P stuck in 9008 port, could you provide a link for your version of Qfil please? as I'm struggling to find your 2.0.0.2 version I either get 1.0.0 or 2.0.0.3 and they're not working
Update: I've found the version! However when I quick Meta build and attempt to locate XML there's nothing I can select? sorry if this is really simple just never done before thank you
Clarkeofcurtis said:
Hello thank you so much for your guide, currently trying to unbrick my nexus 6P stuck in 9008 port, could you provide a link for your version of Qfil please? as I'm struggling to find your 2.0.0.2 version I either get 1.0.0 or 2.0.0.3 and they're not working
Update: I've found the version! However when I quick Meta build and attempt to locate XML there's nothing I can select? sorry if this is really simple just never done before thank you
Click to expand...
Click to collapse
place the files in a folder.
then in QFIL brows to the folder
need to select build path first.
What type of brick does this fix? Is this for the big one " boot loop of death" that's been well covered?
I ask out of curiosity. My phone's unaffected (knock wood)
KLit75 said:
What type of brick does this fix? Is this for the big one " boot loop of death" that's been well covered?
I ask out of curiosity. My phone's unaffected (knock wood)
Click to expand...
Click to collapse
hard brick. phone does not turn on at all
Lw00d said:
place the files in a folder.
then in QFIL brows to the folder
need to select build path first.
Click to expand...
Click to collapse
I have done as stated, however when attempting to select build after clicking META BUILD, I have to change the browsing options to ALL FILES from META BUILD CONFIGURATIONS otherwise I can't find anything?
Once selected Patch0, I proceed to select programmer path, but then my download content isn't clickable please?
Select build type click flat build. See if u could click on download
Lw00d said:
Select build type click flat build. See if u could click on download
Click to expand...
Click to collapse
I can start it VIA flat build, however I get this error
Now try with meta build
Lw00d said:
Now try with meta build
Click to expand...
Click to collapse
When trying with meta build this is the problem I'm faced with.
Can't select anything, am i using wrong version of Qfil perhaps or isn't that an issue as it's the newst?
I click load content and I can't view the files I'm supposed to be selecting
Clarkeofcurtis said:
When trying with meta build this is the problem I'm faced with.
Can't select anything, am i using wrong version of Qfil perhaps or isn't that an issue as it's the newst?
I click load content and I can't view the files I'm supposed to be selecting
Click to expand...
Click to collapse
That never happen to me.. Could be the version u have installed.
In flat build. When u hit download. Does the blue progress bar move?
Sorry, I've found it again. But this time - different error... :/ Any ideas?
Lw00d said:
That never happen to me.. Could be the version u have installed.
In flat build. When u hit download. Does the blue progress bar move?
Click to expand...
Click to collapse
Thank you for your help and replies, no blue bar when I click download on flat build, just gives me that port error about it taking 10 seconds to open when it should only be 3? I'll try it on your version and let you know bare with me
---------- Post added at 07:44 AM ---------- Previous post was at 07:32 AM ----------
Lw00d said:
That never happen to me.. Could be the version u have installed.
In flat build. When u hit download. Does the blue progress bar move?
Click to expand...
Click to collapse
Could you send me a link to your version please?
Sorry, I've found it again. But this time - different error... :/ Any ideas?
Clarkeofcurtis said:
Sorry, I've found it again. But this time - different error... :/ Any ideas?
Thank you for your help and replies, no blue bar when I click download on flat build, just gives me that port error about it taking 10 seconds to open when it should only be 3? I'll try it on your version and let you know bare with me
---------- Post added at 07:44 AM ---------- Previous post was at 07:32 AM ----------
Could you send me a link to your version please?
Sorry, I've found it again. But this time - different error... :/ Any ideas?
Click to expand...
Click to collapse
It's on first post
Lw00d said:
It's on first post
Click to expand...
Click to collapse
Getting this
Clarkeofcurtis said:
Getting this
Click to expand...
Click to collapse
did you do this..
for those that get the fail right away.. while phone connected to pc, hold power button until drivers disappear from device manager.. then disconnect phone, wait for 5 seconds, hold power button, for 10 second,.. wait for 5 seconds .. then connect phone back to pc, wait for device manager to see drivers.. then hit the download button . do this part over and over again ..until it works..
also try extracting all these files into the folder you made .. this includes the three files .. https://drive.google.com/open?id=0By19rrbnQfVUbFZSc3A3VXhGRzQ
Thank you so much! I messed up my 6P when I tried to flash a bootloader image via Flashfire. I hadn't been in a brick this bas since the good old days of Gingerbread and ROM Manager! For anyone else having similar issues, I got my dead 6P to be recognized as QHSUSB_bulk eventually in Windows 7. I then edited the rawprogram0.xml file (from OP's link) in a text editor. I removed the entries for all the other partitions I didn't want to overwrite (like system and vendor and userdata), leaving only the sbl1 (secondary bootloader, the part of the firmware that actually boots into the system/recovery/bootloader when the device is first powered on) partition entry - because that's what Flashfire said it had flashed the entire bootloader image to. Doing a bit of research, I found that our bootloader image is actually just many different small partitions all grouped together into a single image file. I couldn't figure out how to unpack the bootloader image, so I downloaded a full firmware OTA zip from Google, and lo and behold, there was a "bootloader.sbl1.img" (along with other small partitions) file in the OTA zip. I changed the sbl1.img entry in the rawprogram0.xml file so that it correlated with the filename "bootloader.sbl1.img", I moved the image file into the same folder as the rawprogram0.xml, and then I was able to restore my device to it's previous functionality using the "flat build" download configuration in QFil, though the whole process did take me like 3 hours. Lesson learned - screw using Flashfire for bootloader images.
ERROR: Could not access "C:\temp\vendor.img" with access mode 'rb'
When I'm finally lucky, rebooting, replugging the phone, it looks like it might flash...
...then I see this.
I've given all permissions to all users for full control, on the file, I've run time program as administrator, I don't know what else to do. If it can't open the file, I can't flash my phone. I'm not a Windows administrator so I don't really know what to do to get this to work and I can't find any hints on the forums.
Section 1 Covers how to install pie on H87320i.
Section 2 Covers How to rollback from H87329a to H87320I
Section 1
Download FOTA file
v29a
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
v30b
https://mega.nz/#!e9cQ0QTZ!vpCXt1eYUUpTo2NJ-0t8I6SiIxt6qXbTOjupsHIzB9s
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Section 2
How to roll back from pie
check post below
https://forum.xda-developers.com/showpost.php?p=80464669&postcount=46
Credits:
f.h7 for rollback tutorial
v30b link by umaga2012
Some tutorial points by vaniok56 (Reddit)
harib12 said:
Download FOTA file
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Some tutorial points by vaniok56 (Reddit)
Click to expand...
Click to collapse
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
matthew33 said:
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
Click to expand...
Click to collapse
yes
KyleKlarkson said:
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
Click to expand...
Click to collapse
Good for u
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Here you go:
https://www.youtube.com/watch?v=OaCdtRz8k-g
Matt
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Mostly Occurs when you have LG Bridge. I also got that error uninstalling LG bridge resolved it.
DVD-XDA said:
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Click to expand...
Click to collapse
You should be using H87320i in order to update. Please make sure you have correct drivers and you are using LGUP version I provided. In order to update your phone should be on the home screen and sometime Lg bridge also cause trouble
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Is it possible to install on h87320c?
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
umaga2012 said:
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
Click to expand...
Click to collapse
If you are already using H873 stock rom then it should be fine however, I will not take responsibility for your action. Compatibility mainly depends on hardware similarity.
DVD-XDA said:
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
Click to expand...
Click to collapse
I am not using any common dll
LeeTG3 said:
Is it possible to install on h87320c?
Click to expand...
Click to collapse
It should be didn't try but it is FOTA. An OTA requires a sequence. However, as you are pushing this using LG UP maybe you have some luck. But I suggest flashing H8732oi KDZ.
Leonidas87 said:
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Click to expand...
Click to collapse
If You're following this tutorial your phone should show a FOTA screen then it should boot. It is an open FOTA and not restricted to carriers. and are you using the links i have given? do you install any Common dll?. If yes remove the common dll as your using upper cut.
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
yoyodiaz said:
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
You didn't replace the model folder and LGUP in C drive properly. Don't use the folder you downloaded to start the program.