hi all the prob is that can't get into recovery mod in galaxy mini s5570 by pressing the home button and the power button that's happened after i was trying to setup CWM recovery via odin after i get tired from google it about eny solution i say that i must ask here and that's the message from odin after i press (start ) to start install stock recovery or install CWM recovery i can't get into recovery mod just Downloading mod and sorry for my bad english
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "recovery-stock.img"
<1> e - unknown file - "ANDROID!€?2"
<1> set download environment.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
Related
OK I SOLVED IT
Hi help me my phone is stuck at download mode now when i pull the battery and start the phone or whn i try to get in recovery mode ma getting phone and pc connection logo help its urgent btw i was on KPN and GR1.2
i wanted to switch to GR1.3 and this happend while flashing KPO
NOTE i CAN ACCESS DOWNLOAD MODE
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
When I Flash KPH/KPB phone Boots Up and If I Flash Any Other KPN/KPO/KQ5 even with Full Pacage Phone Stucks At mibib download
My guess is your flashing wrong somehow. There should be no problem if it will run some fine. I do get an issue with some roms stuck on boot screen. I get round it by flashing with 2.2.1 then flashing to 2.3.3/4
Sent from my MY-Ui Mint internet edition powered galaxy ace!
I am having a problem, I flashed MIUI files for Fit on my Galaxy Gio through CWM but it gave me "Installation Aborted!" Error ... After that I restarted my Gio and it stuck on boot loop, I tried to get into recovery but I was unable to access it.
Now when I want to flash CWM recovery for Gio through Odin it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
And when I try to install stock firmware it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
Kindly help
Everthing is fine now ... I flashed it from friends PC ... My drivers were corrupt
Sent over Electromagnetic Waves
i had the same problem
pakistanish said:
Everthing is fine now ... I flashed it from friends PC ... My drivers were corrupt
Sent over Electromagnetic Waves
Click to expand...
Click to collapse
im very thankfull i didnt know either that my copmuter was the problem so i tried from another and it works
Samsung Galaxy Stuck at Startup
Hi,
I got galaxy gio, which has Android 2.3.3, today at a worse moment of my life, I update my gio from Setting > About Phone > Update then it ask me for sign in, I login then it start updating after some time it says your phone is now restarting, then a 20 - 30 mints loading comleted and it stucks, then I restart it doesn't do anything, it only stucks at boot up screen, on that my screen just showing me Galaxy Gio S5660 and then nothing happened just stuck, I again restart but it stuck.
now I want to restore it to factory setting by pc, if it possible, I thing i have disturb the OS so I can only restore it by from my PC.
plz help I think i have lost my android
Yesterday night i did some modding to my phone: first of all i -rooted it (and it all went good)
-installed clocwordrecovery (and it went good)
-i thought i cloud install a custom rom so i first did a nandroid with clocwordmod... but when i finished the backup the phone would go directly into recovery mode and not turn on... i saw a tutorial on how to stop that and did it: now my phone is (bricked, think) i can't start recovery mode or turn it on cuz an icon with cell and pc with a yellow triangle in the middle comes in the middle.. i thought i should flash the phone.. so i download odin 4.43 and did exactly like in the tutorial but in odin i get : Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
....and it stops there..
HOW DO I SOLVE THIS PLEASE???
edit: i tried different odin versions different firmware and different cable (cant try different pc)
edit2: I MADE IT!!! i just had to copy odin, the .ops and the firmware files in the root of the pc (\C
Hi
I'm trying to hard reset Galaxy 5. It's my friends's phone actually. It's locked with pattern and he forgot the pattern. Now the galaxy is asking for GMail account that he doesn't know too. I tried to enter mine, but there is no internet conection on his phone. I tried to turn it on with the power key, but it's like i never clicked on anything.
I tried with ODIN using these files:
OPS File: C:\Users\Puma9251\Desktop\EUROPA_I5508_v1.0.ops
One package: C:\Users\Puma9251\Downloads\ClockworkMod-Galaxy5-RFS-v0.7.tar
I'm trying to install CWM and install custom ROM or at least reset the device,but nothing happens. It'just restarts the device and does not enter in recovery.
Here is log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/2 Finished.
<1> csc.rfs download..
<1> 2/2 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
I'm conecting the phone in downloading mode (the yellow triangle thing).
What's wrong with that phone? I tried reflash but it\s the same/
insitex said:
Hi
I'm trying to hard reset Galaxy 5. It's my friends's phone actually. It's locked with pattern and he forgot the pattern. Now the galaxy is asking for GMail account that he doesn't know too. I tried to enter mine, but there is no internet conection on his phone. I tried to turn it on with the power key, but it's like i never clicked on anything.
I tried with ODIN using these files:
OPS File: C:\Users\Puma9251\Desktop\EUROPA_I5508_v1.0.ops
One package: C:\Users\Puma9251\Downloads\ClockworkMod-Galaxy5-RFS-v0.7.tar
I'm trying to install CWM and install custom ROM or at least reset the device,but nothing happens. It'just restarts the device and does not enter in recovery.
Here is log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/2 Finished.
<1> csc.rfs download..
<1> 2/2 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
I'm conecting the phone in downloading mode (the yellow triangle thing).
What's wrong with that phone? I tried reflash but it\s the same/
Click to expand...
Click to collapse
Just install adb on your PC, connect your turned on phone via usb, open console on pc and type adb reboot recovery
Ok,i did it. I managed to go to recovery mode and install SonyStyle ROM. I did wipe cache/data before that. I restarted teh device, i thought i will se loading ROM. No,iot's just showing SAMSUNG logo, i think it's a bootloop. I can't conect it to adb anymore,as i can't turn it on. Can't flash it with ODIN too, it says close port and waiting for restart and the phoen restart itself with dark screen,then SAMSUGN logo and thats all.
Any ideas?!
Have you closed all Kies processes and ran Odin as Administrator?
Sent from my GT-I5500 using xda premium
yes,still notworking.
it gave me this:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "cache.rfs"
<1> e - unknown file - "л<ђMSWIN4.1"
<1> set download environment.
<1> data.rfs download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
the phone retarted itself with dark screen. after 1 minute it showed me the charging animation. when i restarted it manually odin said "pass"
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
so i cant even reflash it. the phone stayed in samsung logo for a while,then it stayed on it. Nothing appeard to happen. It just says SAMSUNG. Sometimes the screen is going black for a sec and then it says SAMSUNG again.
Try another package.
Sent from my GT-I5500 using xda premium
can you give me links as i have no idea where to search for as the device is not mine
Use the search function and search for CWM recoveries in this forum ( gt-i5500)
Hello, look there http://forum.xda-developers.com/showthread.php?t=1151396&highlight=cwm and you could try with some psyke83's roms. Almost every rom is build on them. I recomend CM10.1 it's stable and everything works.
Hello,
I'm trying to unbrick a bricked Samsung I5500 (branded TIM, from Italy). I booted it into download mode by pressing volume down, center and hang up, and with the yellow triangle on I tried to flash it using VirtualBox. However it doesn't go past this:
Code:
<1> setup connection...
<1> odin mode.. check plcatform verification.
What I tried to do is pausing the Windows virtual machine, disconnecting the phone from the VM, reconnecting it, waiting a couple seconds and unpausing it. It says it's verified, but also "disconnected" right after.
Log:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> e - usb is disconnected!!
<1> thread will be terminated.
<0> Destroy instant..
<0> Killed timer
<1> Disconnected!!!
A screenshot is attached.
I tried using Heimdall but I get a libusbx error, I guess it's not supported as it also requires a specific version of ODIN on Windows.
What can I do to solve this issue? The phone doesn't work and it's stuck in a bootloop.
Thank you.