Hey guys, ive searched the whole day now and have a serious problem with my LG G2 D802 variant..
I tried to flash Paranoid Android 4.0 with TWRP and there was a never ending boot animation, after that I tried to do a factory reset with the LG Flash tool wich stops at 49%.
Now I'm trying to unbrick it with this tutorial but I can't find the .tot file for the D802.
http://optimusforums.com/threads/guide-complete-guide-to-unbrick-your-soft-bricked-g2-f320.9232/
The thing is, I have extracted the .kdz and it outputs a .dz and a .dll when I'm trying to start the flash progress, there is a popup wich says "Failed PriviousLoad()... :/
Could someone please help me out?
Sidenote: I have access to TWRP but sideload wont work(?) adb lists no devices....
i look for it allso
i look for it allso
i have d802 International but without Recovery,and cannot access to fastboot
only TOT will help me.
Please!!! help us...
I think this will help!
dagotal said:
i look for it allso
i have d802 International but without Recovery,and cannot access to fastboot
only TOT will help me.
Please!!! help us...
Click to expand...
Click to collapse
hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.
i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..
I changed the USB com port to 4, to 41.. nothing Worked!!!
and at last!..
I ve found a solution...
here it is...
i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://forum.xda-developers.com/showthread.php?t=2483250
to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..
then put .py script file, .kdz file into "c:\python27\" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.
and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013
i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://forum.xda-developers.com/showthread.php?t=2475045
if you fallow the steps explained here,
http://forum.xda-developers.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above
YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone
hope this helps..
please inform me if you succeed.
.tot file for D80210e_EUR_XX
Are any of .tot files from link above compatible with phone running stock d80210e_eur_xx, so 32Gb version? Or can I just use the one which is for 32Gb version (using .dll from d80210e_eur_xx.kdz and .tot from d80210b_sea_xx) and then use .kdz method with d80210e_eur_xx.kdz to get my carriers official ROM? Thank you in advance!
Worked perfectly
tanerf82_ said:
hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.
i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..
I changed the USB com port to 4, to 41.. nothing Worked!!!
and at last!..
I ve found a solution...
here it is...
i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://forum.xda-developers.com/showthread.php?t=2483250
to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..
then put .py script file, .kdz file into "c:\python27\" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.
and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013
i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://forum.xda-developers.com/showthread.php?t=2475045
if you fallow the steps explained here,
http://forum.xda-developers.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above
YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone
hope this helps..
please inform me if you succeed.
Click to expand...
Click to collapse
Thanks man, I had some problems with the LG UpTestEX software, and your method worked perfectly !
I made a successful downgrade with a D802 (4.4.2 Vodaphone to 4.2.2 JDQ39B) :victory:
When all else failed... this worked.
With correct dll and tot files... this worked a treat.
Thanks for all the work guys
tanerf82_ said:
hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.
i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..
I changed the USB com port to 4, to 41.. nothing Worked!!!
and at last!..
I ve found a solution...
here it is...
i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://forum.xda-developers.com/showthread.php?t=2483250
to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..
then put .py script file, .kdz file into "c:\python27" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.
and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013
i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://forum.xda-developers.com/showthread.php?t=2475045
if you fallow the steps explained here,
http://forum.xda-developers.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above
YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone
hope this helps..
please inform me if you succeed.
Click to expand...
Click to collapse
Thank you for this great tutorial, I have a query though. The TOT files provided in the link, are they generic? I have the same phone but the 32gb variant. Can i extract the DLL and then flash the 32gb TOT on tmy LG G2 D802 International variant?
bidsar.k said:
Thank you for this great tutorial, I have a query though. The TOT files provided in the link, are they generic? I have the same phone but the 32gb variant. Can i extract the DLL and then flash the 32gb TOT on tmy LG G2 D802 International variant?
Click to expand...
Click to collapse
It was a "bit" long time ago I dont remember exactly what the issue really was. But i think "memory variant" wouldnot be important for dll.. give it a try, it should work..
tanerf82_ said:
It was a "bit" long time ago I dont remember exactly what the issue really was. But i think "memory variant" wouldnot be important for dll.. give it a try, it should work..
Click to expand...
Click to collapse
Thanks for the reply. So should i extract the DLL from the stock KDZ and the flash the 32gb TOT from that link? Are you sure it won't mess things up more?
I badly want to fix this issue or else i would have to pay a hefty amount to my friend. I just want to be sure i dont render it completely dead.
By the way, are those TOTs carrier specific?
Related
[GUIDE] Root L9 ICS/JB with New Lelus method & Offline Flashing [LOCKED BL] [31-Mar]
Please do not follow this OLD ROOTING GUIDE as I have written NEW ROOTING GUIDE for...
New GUIDE for Easiest Rooting + Unlocking of LG L9 [Bye Bye Fastboot] by CMahendra
Rooting is possible directly from phone. Tested and 100% working!
http://forum.xda-developers.com/showthread.php?t=2779985
==============================================================
OLD GUIDE, VISIT ABOVE LINK
[GUIDE] Root L9 ICS/Jelly Bean with New Lelus method and Offline Flash (1st and 2nd post)
(NOTE: This thread is only for NOOBS like me and for Junior Members.)
ATTENTION: THIS WORKS ON ICS/JELLYBEAN with both locked/unlocked bootloader.
But Go here for FASTER Root L9 JB/ICS on Unlocked Bootloader.
To understand and perform Flashing L9, you should read all following threads carefully before starting.
GUIDE TO NEW ROOT L9 WITH LELUS METHOD AND FLASH L9 (this post)
LELUS THREAD to Root L9 Thanks to Lelus (GUIDEPOST BY ARTIT Thanks to Artit for his preliminary guide)
JELLY BEAN ROOTING FILES BY ANGRYWOLF80's
TUTORIAL ON OFFLINE FIX FLASH METHOD by me << VERY IMPORTANT HERE
COLLECTION OF READY-MADE HEX-EDITED BIN FILES (in second post) by me. BIN files ready to download and flash. Now includes Jelly Bean files too.
MAKE YOUR OWN HEX-EDITED BIN FILE EASILY again by me
If anyone want to learn and still want to make their own HEX EDITED BIN files from their own KDZ, its really very easy. You dont have to download huge files again, and will be able to make your own edited BIN from the KDZ you already downloaded before. To support Rooting L9 with Lelus Method, I am uploading and collecting the readily HEX-EDITED BIN files. Now you dont have to worry for Bricking with wrongly EDITED BIN file. This will AVOID the process of editing HEX file, which may be bit confusing for some noobs like me
============================
SPECIAL THANKS TO LELUS AND ANGRYWOLF80 FOR THEIR TEAM WORK.
LELUS: This Rooting Method is not my original work AND ALL CREDIT GOES TO LELUS WHO GAVE THIS NEW CONCEPT OF HEX-EDITING OF BIN AND A SH SCRIPT TO RUN BEFORE FLASH. Without Lelus this thread might not exist.
ANGRYWOLF80: I am really thankful to him for providing a solution with changes in Lelus's script so the SU is not copied on every boot and also made changes to avoid mounting system in RW mode, keeping original hdcp.sh file without changes. The current improved modified BatchFile is by him. This removes some vulnerabilities.
Also thanks to him for JELLYBEAN ROOTING FILES. Pals, he really worked hard for this. Press THANKS button on his thread.
Adixtra and Unknown_world : Makers of Offline Fix Flashing Method. Without them Flashing Guide was not possible.
GUIDEBOOK STEPS
=============
0) Precautions:
___A) Select "Debugging Mode" as ON (Ticked) in Phone Settings (Developer Section)
___B) Select "Install from Unknown Sources" as ON (Ticked) in Phone Settings (Security Section)
___C) Indian version of L9 does not come with "Lookout Security Antivirus" already installed. But KDZ from other countries may have it already installed, FORCE CLOSE AND UNINSTALL it from app manager. If you cannot uninstall, at least DISABLE it. This program is known to be preventing connection and rooting of device.
___D)OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
1) Download Hex-Edited BIN file and related KDZ file (on same line) in exact combination shown in SECOD POST BELOW. If you already have downloaded exact KDZ from this post, then you dont need to download KDZ again, just download matching BIN file.
2)
FOR ICS Download >>> Root_and_Flash_Guide_byCMahendra(date).zip
FOR JellyBean Download >>> RootJB_and_Flash_Guide_byCMahendra_AngryWolf80(31-Mar).zip
Either choose ICS version or JB and extract in your C-Drive.
Now you will get three folders named "C:\RootLelus" and "C:\RootFlash" and "C:\shttps"
3) Install Drivers: "LG USB Driver (Download 3.8.1 here)"
4) Optional if installed before: Install MSXML 4.0 SP3 Parser by running "msxml.msi" file in "RootFlash" folder.
5) Connect Phone to PC with USB in "MTP" mode, let all drivers install for detected hardware items, then in "Charge Only" Mode, let all drivers install, then in "PTP" mode and let all drivers install, LASTLY connect in "LG SOFTWARE" Mode and let all drivers install. Don't neglect anything, it will save OUR time.
IMPORTANT: Weirdly windows will try to install its own WDM drivers searching online in internet. Do not let it install like that. It will be stuck with longer time or it will just fail to install drivers.
Solution: Always Click the link/button "Skip Obtaining Driver....." shown in this screenshot, so pc will install only original LG drivers for all devices in all usb modes.
6) Keep phone in "LG SOFTWARE" Mode and wait until it is connected. Now at this moment Device Manager should show 3 entries like this. If not, flashing will not work. (This is Important Checklist Step)
7) ADB MODE: Now start Windows Command Prompt with "Run As Administrator" option. Try to ping any website, if you SEE THIS DOS ERROR (SCREENSHOT) you are not in Admin mode and you need to try again. (THIS IS IMPORTANT CHECKLIST)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now pass following commands in lower case as adb command is "case sensitive"
C:\>CD \RootLelus
C:\RootLelus>stuff\adb devices
Click to expand...
Click to collapse
***For Jellybean the folder will be "RootLelusJB" instead of "RootLelus"
Now your device should be shown as "List of Attached Devices" like this result in screenshot. (Important Checklist Step)
This means your device is ready to take ADB Commands. PLZ DONT IGNORE THIS CHECKLIST. If fails, check cables, reinstall drivers, restart pc, connect cable directly on motherboard USB port and try again from first step.
8) This is important root preparation for Rooting before Flashing. Now Run a batch file "RootL9" on command prompt with following commands.
C:\RootLelus>RootL9
Click to expand...
Click to collapse
This simple automated command batch-file (RootL9.bat) will copy necessary files to special locations and will set some necessary permissions.
When done, REMOVE USB CABLE AND POWER OFF THE PHONE.
9) NOW ACTUAL KDZ FLASHING STARTS AND THEN A QUICK MAGIC TRICK IS TO BE PERFORMED.
___9A) Add lines in "hosts" file as mentioned in step 1 of this post.
___9B) Start "SmallServer" as mentioned in step 2 of same post
10) Now follow all steps from all 3 to 10 from this original flashing post. In 11th of original flashing post your have to do following magic.
11) ACTUAL MAGIC:
After LG UPDATE TOOL starts, wait for following message in RED SENTENCE.
When you see this message and update meter reaches to 8%, then
quickly open this folder "C:\ProgramData\LGMOBILEAX\Phone"
and look for extracted bin files, if you see the same name as BIN file you downloded (LGP765_AP[6].bin or LGP765_AP[11].bin), replace it with the one you downloaded earlier (which is already HEX-EDITED).
Press "Continue" if windows asks you for permission to copy and replace.
Folder not found? Workaround: Copy this "C:\ProgramData\LGMOBILEAX\Phone" and paste in windows explorer at top, the folder should open directly, then replace file. In one of the rarest case, in WIN XP machine the folder was found here "C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone" in this post.
Still problems? Check this post too.
Let flashing complete, and you are done. YOU HAVE JUST ROOTED L9!!! Phone should now reboot with working SuperUser. If SuperUser ForceCloses, just restart phone once again.
12) CWM Recovery Installation on ICS: This rooting does not install ClockWorkMod. First run SuperSU and install SUBinary if it asks to install and then visit this thread to install L9 Recovery Installer by Artas182x. First install this app and then run app and install Recovery.
CWM Recovery Installation on Jelly Bean: Please follow AngryWolf80's thread for installing CWM. If you dont find the information, post your question in his thread.
13) BUSYBOX Re-Installation: According AngryWolf80, he found some new vulnerabilities and recommended to uninstall BUSYBOX and REINSTALL it as per this thread and these instructions. Though this is applicable to the Root File released on 6th March, but these instructions by AngryWolf80, can be tried by anyone just to install and update busybox.
========================================
Troubleshooting
1) After step 2: If extracted folders need any permissions, then you should provide in folder security section by adding user "everyone" or "<yourname>" and give full access. (example video) This is Optional and should be done if you have permission errors while flashing. Do it for all three folders.
2) About 11th Step: The most common problem is you may not be able to replace the file in LG folder in quick time. You have to be very quick, so the FOLDER should be open in advance. You can even open the folder in the beginning and minimize until it is required to replace. If you are late, the LG TOOL will flash original file and root will fail. Or you can open the folder immediately when it starts at 4% and keep looking for file to replace. As soon as you see 7th BIN file PASTE it with 6th BIN, you already COPY'ed before.
========================================
THIS GUIDEBOOK IS MADE AFTER SUCCESSFUL ROOTING OF MY P765 ON UNROOTED V10G INDIA
WITH LELUS METHOD AND SOME MODIFICATIONS AND CHANGES IN FILE BY ME. IF YOU CANT DO IT, DONT BLAME ME. READ REPEATEDLY.
WARNING: USE INFORMATION AND FILES AT YOUR OWN RISK. DON'T EVEN MENTION ME IF YOUR PHONE IS BRICKED. :laugh: YOU WERE WARNED IN BOLD RED LETTERS ALREADY.
========================================
DOWNLOAD NOTE: This download package includes everything you need to FLASH and ROOT L9. It has all ADB resources, SmallServer, Rooting by Lelus, etc. You dont need to download anything else except this package.
Good Luck.
Collection of ready-made hex-edited bin files for rooting
FOR P760, P765, P768, P769 AND NOW P778
COLLECTION OF READY-MADE HEX-EDITED BIN FILES FOR ROOTING
YOU SHOULD DOWNLOAD BIN FILE AND MATCHING ICS/JB KDZ FILE MENTIONED ON SAME LINE.
*If ZIPPED, Unzip the BIN file before flashing
P769 JELLY BEAN
Download LGP769_AP[11].bin and FACTORY KDZ of V20F TMobile USA
(bin edited and uploaded by mrmathematica.) not tested by me.
.
Download LGP769_AP[11].bin and FACTORY KDZ of V20D TMOBILE USA
(bin edited uploaded by me.)
.
P765 JELLY BEAN
.
Download LGP765_AP[12].bin and FACTORY KDZ of V20D HONG KONG
(bin edited uploaded by me.)
.
Download LGP765_AP[11].bin and FACTORY KDZ of V20A INDIA
(bin edited uploaded by me.)
.
Download LGP765_AP[11].bin and FACTORY KDZ of V20B CIS COUNTRIES
(bin edited uploaded and tested ok by me)
.
P760 JELLY BEAN.
V20C Download LGP760_AP[11].bin and FACTORY KDZ OF V20C EUROPE OPEN
(bin edited uploaded and tested ok by me)
.
V20B Download LGP760_AP[11].bin and FACTORY KDZ OF V20B EUROPE OPEN
(bin edited uploaded and tested ok by me)
.
P768 JELLY BEAN
Download LGP768_AP[12].zip and KDZ OF V20A TELCEL MEXICO
(Mirror of ZIPPED bin by GiBraiNe, tested ok) reference
Download LGP768_AP[12].bin and KDZ OF V20A TELCEL MEXICO
(bin by GiBraiNe, tested ok) reference
P765 ICS
Download LGP765_AP[6].bin and FACTORY KDZ OF V10G INDIA
(bin edited uploaded and tested ok by me)
.
Download LGP769_AP[6].bin and FACTORY KDZ OF V10F CIS COUNTRIES
(bin edited uploaded and tested ok by me)
P760 ICS
Download LGP760_AP[6].bin and FACTORY KDZ OF V10i SPAIN KDZ
(bin edited uploaded and tested ok by me)
.
Download LGP760_AP[6].bin and FACTORY KDZ OF V10H EUROPE
(bin edited uploaded and tested ok by me)
.
Download LGP760_AP[6].bin and FACTORY KDZ OF V10H Germany
(bin by RobbingHood, perfect and tested ok, post)
.
P768 ICS
Download LGP768_AP[6].bin for P768G V10A_01 Claro Centroamerica (CAO)
(bin by elmere481, tested ok by himself) sent link in pm
.
Download LGP768_AP[6].bin and KDZ OF V10B ARAB EMIRATES or V10B SOUTH AFRICA
(bin by thomasoeli, tested ok) reference
.
Download LGP768_AP[6].bin and FACTORY KDZ OF V10E PHILIPPINES
(TELECOM CONCEPTS INC)
(bin by me, perfect and tested ok)
.
Download (ZIPPED) LGP768_AP[6].bin and FACTORY KDZ OF V10A BRAZIL
(bin by me, perfect and tested ok)
.
Download LGP768_AP[6].bin and FACTORY KDZ OF V10E TAIWAN
(bin by donk165, perfect and tested ok, post)
.
P769 ICS
Download LGP769_AP[5].bin and FACTORY KDZ OF V11A Canada
(bin by me, perfect and tested ok)
.
Download (ZIPPED) LGP769_AP[5].bin and FACTORY KDZ OF V10G USA TMOBILE or here 4 links.
(bin by me, perfect and tested ok)
.
Download LGP769_AP[6].bin and FACTORY KDZ OF V10G USA TMOBILE or here 4 links.
(bin by foister82, perfect and tested ok)
P778 ICS
Download LGP769_AP[6].bin and FACTORY KDZ OF V10A PERSONAL ARGENTINA
(bin by wallgus, perfect and tested ok)
.
NOTE: If you do not see KDZ from your own country, try to find in this thread and MAKE YOUR OWN HEX-EDITED BIN FILE EASILY for above rooting. Good Luck.
Thanks a lot to all HEX-EDITED BIN contributors. I downloaded most KDZ's (500+-mb) just for the sake of making perfect BIN files.
NOTE: This thread is only for NOOBS like me and for Junior Members.
I am sure experts who can edit hexfiles without any error, should not have any objection if this thread stays and serves junior members. Good Luck all Elnaainians (L9ians)
(P769 10G) I have not yet tested saturnianalien's bin, but here's a link to his post http://forum.xda-developers.com/showpost.php?p=38653115&postcount=32
cmahendra said:
Thanks to LELUS for showing us the new way of rooting almost all L9
YOU ARE REQUESTED FIRST TO READ FOLLOWING TWO POSTS CAREFULLY BEFORE DOWNLOADING ANYTHING FROM HERE
LELUS THREAD OP
THIS GUIDEPOST BY ARTIT
To support above thread about Rooting L9, I am collecting the HEX-EDITED BIN files.
P765
For anyone who want to directly ROOT V10G India P765 variant, I have HEX-EDITED the 6th part of extracted BIN file as per LELUS's screenshot and uploaded to this fileserver. This is file with HEX-EDITED portion and READY TO ROOT with LELUS method.
http://www.multiupload.nl/CUN6MIJUQX LGP765_AP[6].bin (75 MB V10G INDIA)
P760
Coming soon
P768
Coming soon
P760
Coming soon
This will simply the process of editing HEX file, which may be bit confusing for some.
NOTE: This thread is only for NOOBS like me and for Junior Members. I am sure experts who can edit hexfiles without any error, should not have any objection if this thread stays and serves junior members.
WARNING: As usual, you all know it, USE THIS INFORMATION AND FILES AT YOUR OWN RISK. Thanks in advance.
Click to expand...
Click to collapse
Thanks for all that you make for L9 I wait for P760 buddy:good:
foister82 said:
(P769 10G) I have not yet tested saturnianalien's bin, but here's a link to his post http://forum.xda-developers.com/showpost.php?p=38653115&postcount=32
Click to expand...
Click to collapse
I checked this link and searched the link inside but did not find any link mentioned by you for Hex-Edited V10GP769 bin file. Please recheck and send exact link or post with link.
When I posted that I didn't have 10 posts yet, so I couldn't post an actual link. Instead, I replaced "." with "[dot]". Anyways, I've just uploaded it to multiupload.nl for you. I've rooted with this on my own P769 and have checked the new checksum with the old one to ensure it hasn't been corrupted since the file was last accessed.
Download LGP769_AP[6].bin (75 MB V10G TMO USA)
MD5: c2cbf3997a9ab7181c71c75d697db6f5
When I posted that I didn't have 10 posts yet, so I couldn't post an actual link. Instead, I replaced "." with "[dot]". Anyways, I've just uploaded it to multiupload.nl for you. I've rooted with this on my own P769 and have checked the new checksum with the old one to ensure it hasn't been corrupted since the file was last accessed.
Update:
Just uploaded the unrooted KDZ for P769BK V10G TMO USA (MD5: f467e9a0d0d4c3880486384b12fb081e), which I originally found in this thread, to multiupload.nl before realizing someone else already did. The official link for the KDZ gives you an HTTP Forbidden (perhaps the LG Upgrade software uses a special user agent, or contains other header info).
You can be sure this is the official and correct URL because they're structured as such: http://csmg.lgmobile.com:9002/swdata/WDLSW/model/authentication/rom/rom.kdz. Everything that's been italicized is changed. You replace it with info from this URL: http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI where IMEI is your IMEI number. The page will give you some information about your phone. Shown on the page, you'll see your IMEI. After that number, you will see your model, the authentication, a number-letter combination I'm unsure of, and then the release date of your phone. Anyways, replace model and authentication appropriately. The name of the rom isn't on that page, but you probably already know the name of the ROM you're looking for anyway. For example, V10g_00. I know all of this from bricking the Optimus S, unbricking it (in fact, I did this several times), and posting a guide over at androidcentral (under a different username).
saturnianalien said:
When I posted that I didn't have 10 posts yet, so I couldn't post an actual link. Instead, I replaced "." with "[dot]". Anyways, I've just uploaded it to multiupload.nl for you. I've rooted with this on my own P769 and have checked the new checksum with the old one to ensure it hasn't been corrupted since the file was last accessed.
Download LGP769_AP[6].bin (75 MB V10G TMO USA)
MD5: c2cbf3997a9ab7181c71c75d697db6f5
Also, I'll be posting the unrooted KDZ in a moment. I found it somewhere on XDA and there is an official LG Mobile link to it as well, but the LG Mobile link gives a "forbidden". Therefore, I'm uploading the KDZ to multiupload.nl now (takes a little bit, it's quite big).
Click to expand...
Click to collapse
Oh WOW! Thanks a lot for V10GP769 Hex-Edited BIN file, its in place and
CHECK THE NEW STEP BY STEP LELUS METHOD ROOTING GUIDE BY ME
in second post above. Hope you will like it.
Edit: Those V10G links were forbidden since 3/4 months. Thanks to that unknown person who saved it long time back when it was available.
Edit2: I must be mad, worked overnight and now downloaded V11AP769, modified [5]BIN and now uploading. (Too sleepy but dont worry no mistakes in V11A.BIN file editing.)
Edit3: Relax relax, saturnianalien. You are giving all old links we know since ages and my Rom Linker works on it since last 1 and half years. V10G KDZ new working link is already given by Gambal88 and placed on OP so dont worry.
denzel09 said:
Thanks for all that you make for L9 I wait for P760 buddy:good:
Click to expand...
Click to collapse
Thanks for appreciation. Uploaded Edited Bin for P760 V10i Spain. Its there.
EDIT: UPLOADED V11A LGP769_AP[5].bin for Canada KDZ (bin by me)
Re: [lelus root] STEP-BY-STEP GUIDE TO ROOT AND FLASH L9 WITH LELUS METHOD
cmahendra said:
Relax relax, saturnianalien. You are giving all old links we know since ages and my Rom Linker works on it since last 1 and half years. V10G KDZ new working link is already given by Gambal88 and placed on OP so dont worry.
Click to expand...
Click to collapse
I didn't use the rom linker because I was detecting spyware from it with several databases. If it used easy-to-read client-side JavaScript rather than server-side ASP or if it came from a website registered by LG, then I'd feel much better about using it. Besides that, I think it benefits everyone to know how stuff works, rather than relying on a tool.
Sent from my LG-P769 using xda app-developers app
EDIT: LG update will not run because it says "Please install CSMG B2C Client Tool" "Select tool ->B2C Client setup menu"
I tried that as well as manually downloading the b2c installer however it does not change anything. Ive also tried compatability mode (win xp sp3) and that didnt help.
Thanks a ton! Rooted P769 v10G
I uninstalled ALL drivers associated with mobile devices and started from scratch. Worked this time. rooted! woot!
Thanks!!
P769 11A now rooted :victory:
It says that the bin link was removed
rooted p769bk 10g, the longest standing member of the stuck club is finally rooted!!!!
Re: [lelus root] STEP-BY-STEP GUIDE TO ROOT AND FLASH L9 WITH LELUS METHOD
molgera said:
Thanks a ton! Rooted P769 v10G
Click to expand...
Click to collapse
foister82 said:
I uninstalled ALL drivers associated with mobile devices and started from scratch. Worked this time. rooted! woot!
Click to expand...
Click to collapse
dcs101 said:
Thanks!!
P769 11A now rooted :victory:
Click to expand...
Click to collapse
rbraswell8 said:
rooted p769bk 10g, the longest standing member of the stuck club is finally rooted!!!!
Click to expand...
Click to collapse
Thanks a lot everyone. This confirmed my BIN FILES are perfect and STEP BY STEP GUIDE is useful. I am relieved.
EDIT: Tonight will download latest of P768 KDZ and edit and post BIN FILE.
Sent from my LG-P765 using xda app-developers app
Sorry didn't read good enough i found it
R: [lelus root] STEP-BY-STEP GUIDE TO ROOT AND FLASH L9 WITH LELUS METHOD
Thanks, works good on v10i
mike6696 said:
Sorry didn't read good enough i found it
Click to expand...
Click to collapse
lol, happens
denzel09 said:
Thanks, works good on v10h
Click to expand...
Click to collapse
Thanks. Feel great it worked for you too.
Can you please upload your hex-edited V10H bin file and share with us? Also mention which exact variant and country your KDZ is. This thread should contain BIN file and KDZ link together.
R: [lelus root] STEP-BY-STEP GUIDE TO ROOT AND FLASH L9 WITH LELUS METHOD
I have used that posted in first post..
P760, v10h european
denzel09 said:
I have used that posted in first post..
P760, v10h european
Click to expand...
Click to collapse
But first post does not have V10H yet. Are you talking about the one V10i Spain I uploaded for P760?
Which version and variant you have now?
At the very moment, I am uploading V10H Europe.
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. 1: I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
P.S. 2: I don't know if it will work for EVERY phone, I'm just saying it worked on mine. Maybe I'm lucky! But if you tried everything and nothing worked, maybe you could also give this a try.
P.S. 3. YOU MUST HAVE A WORKING FIRMWARE(a firmware that can get installed-doesn't matter if it's the right one).
Solution
First time I did this was with an Optimus L5 - E615.
In my case,there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for L5 E610 - Europe) which was not for my model and I flashed accidentally. Nothing else worked, no matter which firmwares (From LG site) i tried, compatible or not.
I only managed to fix that when I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater, everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/appdata folder.
In L9 it's .WDB instead of .DZ files. So I'm changing it to WDB for the solution
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) do the following steps:
1. Install correct drivers from LG mobile tool to be sure my phone was recognized.
2. Move battery out(Optional, by I prefer it if it's possible).
3. Enter Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extract the -workingfirmware.kdz and the firmwareyouwant.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and rename the extracted firmwareyouwant.wdb same as workingfirmware.wdb
5. Start the KDZ update, choosing the workingfirmware.kdz, and when the workingfirmware.wdb file is extracted, replace it immediately with the (now renamed as "workingfirmware.dz") firmwareyouwant.dz
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and asks you to restart. You can replace them then.
Wierd issue from LG, but it worked for me!
Cheers.
Thank You!! It works!
I can confim it works with LG L7 (P700/P705) too.
L9 does not have any file extracted with e610v20.dz name or any file with .DZ extension. Are you sure this is somewhere related to L9 by any chance?
cmahendra said:
L9 does not have any file extracted with e610v20.dz name or any file with .DZ extension. Are you sure this is somewhere related to L9 by any chance?
Click to expand...
Click to collapse
Check P.S.1 and what I wrote below mate
Every LG firmware (.kdz files) is extracted as a .dz file during Firmware installation via LG update tool or KDZ updater.
About the e615 files, it's because I had this issue on a friend's L5-E615, but I'm also posting here because I've tested this on L9 too and it's working if you have this issue. From pms and posts I got, it seems that this works on most lg devices(L3,L5,L7,L9). I just posted here because I own a P760.. I'm just trying to contribute to the L9 community..!
EDIT: Cmahendra was right, the file extensions in L9 is .wdb. My bad, nevertheless the solution is the same...!
Cheers,
Moul
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it.
You can download it from Android File Host here in a RAR archive: https://www.androidfilehost.com/?fid=24438995911975083
Alternatively, you can download it directly from LG's servers here: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW25NOE3325BACQF4BA4K6T/VS99011B_04_ARB00.kdz
MD5 of KDZ file when downloaded from AFH (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
You will need to use LGUP to flash this KDZ, which you can download from here: https://www.androidfilehost.com/?fid=24459283995297690. After you have installed LGUP, you will need to extract the 'common' folder from the LGUP rar archive and put it in: C:\Program Files (x86)\LG Electronics\LGUP\model. (See attached screenshot) This 'common' folder contains the DLL file that is needed for LGUP to recognize the Verizon variant of the V10. There are other downloads of LGUP in other forums here in XDA which contain other installers in addition to the LGUP installer. The other installers install DLL files for other variants of the V10 which are not needed for the Verizon variant. The DLL I've included in the 'common' folder is all you need for our Verizon variant.
Enjoy
Reserved
And reserved again.
How big is the file size?
666syco said:
How big is the file size?
Click to expand...
Click to collapse
The KDZ by itself is 2.2 GB. I'll have the link ready later today as my FTP upload to AFH that I had running this morning failed and I have to start over. :-\
Thank you brother downloading now.
rustypie said:
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it. You can download it from Android File Host here: https://www.androidfilehost.com/?fid=24438995911975083
MD5 of KDZ file (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
I've not yet tried flashing this KDZ but I'm going to assume we can use the LGFlashTool to flash this as the cool new LGUP program that has appeared recently in the G4 forums does not work with the V10. I tried it and the program won't even open when my V10 is attached to my computer. I'm guessing it needs a DLL file installed to work. If anyone knows where I can find one, please let me know.
I assure you this is not a fake. This is a genuine KDZ file downloaded directly from Verizon Upgrade Assistant. If anyone here decides to flash it, please let me know what program you used and the outcome of the process.
Click to expand...
Click to collapse
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
burnsky05 said:
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
Did you use the older LGFlashTool when you tried?
rustypie said:
Did you use the older LGFlashTool when you tried?
Click to expand...
Click to collapse
I'm not sure what version I tried but I had many different versions of the software but didn't want to run into a bricked phone and didn't have much time to spend on trying and failing with personal things going on.
LGUP isn't recognizing the KDZ file. It sees the TOT however. Any way to fix this?
EDIT: Just had to choose the Update radial instead of Refurbish.
I believe upgrade is tot only and refurbish is kdz and tot. Or vice versa.
We just got our upgrade to marshmallow is going to be possible to obtain root for it?
http://www.verizonwireless.com/support/lg-v10-update/
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Hypnosis4U2NV said:
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Click to expand...
Click to collapse
Maybe this will work
How to bypass Factory Reset Protection on Samsung devices
http://flip.it/AuQTm
Appreciate the help. Although it doesn't offer much help in the way of LG devices.
Sent from my VS990 using Tapatalk
Lg v1o bootloop
Hi guys, I'm James and I live in mexico. I'm Argentinean. A month ago I bought the LG V10 and then use it normally, one day I restarted the phone all the time and now stays at the logo screen. I know it is operational, the software system. But I took my phone to a technician famous city where I live repair and told me not found support for the cellular putting on new software. You think you can help me? Please . If necessary I will do it myself. What I find something silly and illogical is that he has not found support for the LG V10. Sorry for my English if there are errors. Thank you.
This post works to solve my problem with the LG 10 VERIZON?
Lg v1o bootloop
This process solves my problem? I have a lg v10 vs990w and restarts all the time. It is software or hardware? I can fix it? please help!
Hello all,
In the process of rooting the phone and flashing careless i managed to flash a H901 ROM on a H960 phone. After noticing the horrible mistake i tried to get back to H960 using several methods but to no avail. Here's a list of what i tried so far, followed by what i think i can try next.
1. Tried getting back to stock using this tutorial. LGUP detects my phone as H901 and won't let me flash H960 kdz saying "KDZ file is invalid".
2. Tried using a hex editor on the KDZ file to change any H960 to H901 thinking it might trick LGUP into thinking it is flashing the correct thing. Didn't work either.
3. Tried flashing KDZ file with LG Flash Tool but it says it can't connect to server and stops.
4. Tried updating it with LG Bridge but that also failed (can't remeber the exact error message, but it wasn't anything specific, just something ambiguous about not being able and how i can try to reconnect the phone)
Now, the good parts:
- i still have access to download mode
- have TWRP installed and working
What i think would work is to get a flashable H960A .zip file so that LGUP will see it as it is. Another idea i thought about is to ask any of you who is willing to help me out with a TWRP backup from a H960 model.
If you guys have any other ideas, i'm willing to follow your instructions.
Thank you for taking the time to read about my mess.
Same problem here, really hoping to get it fixed too
Hex editing will work. Can you ss on how you edit it?
@devcon69 Sure, here: https://imgur.com/a/m5dMg are 2 examples of versions i modified in hex(from H960 to H901) all instances of H960 i found were replaced.
Hi all, i finally managed to undo the damage by editing the hex data on a different KDZ file. Either the first time i tried was on a wrong file or i did it incorrectly. The file i edited now is THIS one. I will edit the post with the modified file for H901 in case anyone else needs it.
Thank you all for the help and attention offered
EDIT: https://1drv.ms/u/s!AurbfgIx--Amk0Q7_l6fX60b0T0Y
Hi.i get Error: Error Code= 0x81300302, MD5 checksum error when i try with u hex editored file. Maybe i have to try to download u file again and try ?
Sorry my foult. Its okay now
Could you enlighten us as to the steps you took that accidentally loaded a H901 firmware onto a H960A device?
Loading H901 firmware onto other V10 devices has been suggested as a potential method for unlocking the bootloader of other devices. This seems risky, but I'd very much like to hear reports of success/failure.
Did your H960A have an unlocked bootloader prior to accidentally installing the H901 firmware?
Hi
Can u make a simple tutorial to how we can change the model in the tot file and what app u use to install the firmware?
i have H961N (Dual SIM) and need to install rooted MM but my model still not rooted, just lollipop, so need to install H960a or any other model has a rooted MM.
Thanks in advance.
What you've typed worries me. There are 3 spots in the file that you modified and changing the third could well cause oddities. I would suggest you try running the command `adb shell getprop ro.lge.factoryversion`.
What is the output of that command? If it is a string that begins "LGH960" then my concern isn't an issue. If it is a string that begins "LGH901" then you've still got a problem.
For folks who wish to get this done by computer, try the "chkdzdev" tool from my LGEtools. This is simply a tool to modify the fields mentioned and should make it possible to accomplish this task without a binary editor.
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 27A, the latest available for the VS990.
You can download it from HERE!
>> UPDATE!! PLEASE READ!! NEW DLL FILE REQUIRED TO FLASH!! <<
Like other recent KDZs from LG, you have to use LGUP to flash this. HOWEVER, you need to update the DLL file that LGUP uses to flash this KDZ. To do this, go HERE and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. Just as a precaution, change the extension of the existing LGUP_Common.dll to .bak or something in case this doesn't work for you. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17.
This is the first time I've come across this issue where I had to update the DLL in order for LGUP to flash the KDZ. Therefore, in the future, when I post links for updated KDZ files for the VS990, I will include the latest DLL file along with the KDZ in the archive.
Enjoy! If anyone has any questions, feel free to hit me up!
Hi, thanks for the files, I always wait for them and use them. However, this time LGUP gives me an error. Can you confirm that the md5 of the unpacked file is 9b59ac2e24b5e5afcbbd0ff35f8665ac?
Yeah I can check when I get home from work this evening and ill let you know.
@xdabobobobo I compared your checksum to mine and they are identical. However I tried flashing this KDZ on my phone and LGUP crashed before it even started flashing so the error you're getting probably isn't checksum related but rather an issue with the version of the DLL file LGUP is using. However I found a solution that worked for me. Go here https://www.androidfilehost.com/?fid=529152257862720559 and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. You may rename the existing LGUP_Common.dll to .bak or something in case this doesn't work. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17. From here, try flashing the KDZ.
Thanks, I confirm that your method has worked. It was the dll indeed, not the kdz.
HI GUYS...
rustypie said:
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 27A, the latest available for the VS990.
You can download it from HERE!
>> UPDATE!! PLEASE READ!! NEW DLL FILE REQUIRED TO FLASH!! <<
Like other recent KDZs from LG, you have to use LGUP to flash this. HOWEVER, you need to update the DLL file that LGUP uses to flash this KDZ. To do this, go HERE and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. Just as a precaution, change the extension of the existing LGUP_Common.dll to .bak or something in case this doesn't work for you. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17.
This is the first time I've come across this issue where I had to update the DLL in order for LGUP to flash the KDZ. Therefore, in the future, when I post links for updated KDZ files for the VS990, I will include the latest DLL file along with the KDZ in the archive.
Enjoy! If anyone has any questions, feel free to hit me up!
Click to expand...
Click to collapse
I USED LGUP WITH NEW DLL TO GO TO 27A MM BUT I WAS ON THE ROOTED .TOT FILE SO NOW I SEEM TO BE STUCK ON THE NEW VERIZON LOGO SCREEN FOREVER. BEINGS WE CAN NOT ROLL BACK, IS THIS A BRICK? I THINK THIS IS WHAT I DID WRONG. :crying:
Anybody know what I can do as stuck on the newer Verizon screen as I was on the rooted .kdz or .tot from lollipop with exposed and used LGUP to put the new .kdz 27a marshmallow on there, now I am stuck at Verizon screen and have no phone.
If I toy with LGUP enough it does recognize the phone still but it will not pass the new verizon screen! ugh..
Hi, thanks for the upload. Ive been getting an error when trying to update it says i cant use the refurbished option. When i tried with upgrade I was able to update but i needed to do a clean install. Any idea what may be wrong?
Thanks
So I got the 27A update to finally work, only problem I have now is when the phone boots afterwards, it shows the android icon with "Erasing..." under it, then reboots and now looping the verizon intro.
Help please?
hii vs990 qcn help...
ı help me vs990 qcn bacup file help.