Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it.
You can download it from Android File Host here in a RAR archive: https://www.androidfilehost.com/?fid=24438995911975083
Alternatively, you can download it directly from LG's servers here: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW25NOE3325BACQF4BA4K6T/VS99011B_04_ARB00.kdz
MD5 of KDZ file when downloaded from AFH (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
You will need to use LGUP to flash this KDZ, which you can download from here: https://www.androidfilehost.com/?fid=24459283995297690. After you have installed LGUP, you will need to extract the 'common' folder from the LGUP rar archive and put it in: C:\Program Files (x86)\LG Electronics\LGUP\model. (See attached screenshot) This 'common' folder contains the DLL file that is needed for LGUP to recognize the Verizon variant of the V10. There are other downloads of LGUP in other forums here in XDA which contain other installers in addition to the LGUP installer. The other installers install DLL files for other variants of the V10 which are not needed for the Verizon variant. The DLL I've included in the 'common' folder is all you need for our Verizon variant.
Enjoy
Reserved
And reserved again.
How big is the file size?
666syco said:
How big is the file size?
Click to expand...
Click to collapse
The KDZ by itself is 2.2 GB. I'll have the link ready later today as my FTP upload to AFH that I had running this morning failed and I have to start over. :-\
Thank you brother downloading now.
rustypie said:
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 11B, the latest available for the VS990. I personally have the V10 and it's already on 11B but I have a friend who just received his V10 in the mail today and it had 10B on it so I plugged his into my computer and the Verizon Upgrade Assistant downloaded the 11B KDZ. I have saved it, uploaded it and am making it available anyone who may need it. You can download it from Android File Host here: https://www.androidfilehost.com/?fid=24438995911975083
MD5 of KDZ file (NOT the rar file): 7f971f72b81945ad1f06df56300b6bae
I've not yet tried flashing this KDZ but I'm going to assume we can use the LGFlashTool to flash this as the cool new LGUP program that has appeared recently in the G4 forums does not work with the V10. I tried it and the program won't even open when my V10 is attached to my computer. I'm guessing it needs a DLL file installed to work. If anyone knows where I can find one, please let me know.
I assure you this is not a fake. This is a genuine KDZ file downloaded directly from Verizon Upgrade Assistant. If anyone here decides to flash it, please let me know what program you used and the outcome of the process.
Click to expand...
Click to collapse
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
burnsky05 said:
Same process I posted back in Jan about getting the .KDZ and the post to go along with it. I was unable to get the .KDZ file to flash to the phone. The version also had much userdata included in the file which is why I never released the file.
http://forum.xda-developers.com/showthread.php?p=64828296
This thread claims to have the .KDZ file directly from the LG site.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
Did you use the older LGFlashTool when you tried?
rustypie said:
Did you use the older LGFlashTool when you tried?
Click to expand...
Click to collapse
I'm not sure what version I tried but I had many different versions of the software but didn't want to run into a bricked phone and didn't have much time to spend on trying and failing with personal things going on.
LGUP isn't recognizing the KDZ file. It sees the TOT however. Any way to fix this?
EDIT: Just had to choose the Update radial instead of Refurbish.
I believe upgrade is tot only and refurbish is kdz and tot. Or vice versa.
We just got our upgrade to marshmallow is going to be possible to obtain root for it?
http://www.verizonwireless.com/support/lg-v10-update/
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Hypnosis4U2NV said:
Just going to throw this out there. No matter what KDZ file I download, I can't get passed the Google Account setup. There's data on that file that prevents the phone from going forward and constantly loops back to the beginning of entering the Google Account previously associated with the phone before the factory reset.
Click to expand...
Click to collapse
Maybe this will work
How to bypass Factory Reset Protection on Samsung devices
http://flip.it/AuQTm
Appreciate the help. Although it doesn't offer much help in the way of LG devices.
Sent from my VS990 using Tapatalk
Lg v1o bootloop
Hi guys, I'm James and I live in mexico. I'm Argentinean. A month ago I bought the LG V10 and then use it normally, one day I restarted the phone all the time and now stays at the logo screen. I know it is operational, the software system. But I took my phone to a technician famous city where I live repair and told me not found support for the cellular putting on new software. You think you can help me? Please . If necessary I will do it myself. What I find something silly and illogical is that he has not found support for the LG V10. Sorry for my English if there are errors. Thank you.
This post works to solve my problem with the LG 10 VERIZON?
Lg v1o bootloop
This process solves my problem? I have a lg v10 vs990w and restarts all the time. It is software or hardware? I can fix it? please help!
Related
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. 1: I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
P.S. 2: I don't know if it will work for EVERY phone, I'm just saying it worked on mine. Maybe I'm lucky! But if you tried everything and nothing worked, maybe you could also give this a try.
P.S. 3. YOU MUST HAVE A WORKING FIRMWARE(a firmware that can get installed-doesn't matter if it's the right one).
Solution
First time I did this was with an Optimus L5 - E615.
In my case,there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for L5 E610 - Europe) which was not for my model and I flashed accidentally. Nothing else worked, no matter which firmwares (From LG site) i tried, compatible or not.
I only managed to fix that when I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater, everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/appdata folder.
In L9 it's .WDB instead of .DZ files. So I'm changing it to WDB for the solution
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) do the following steps:
1. Install correct drivers from LG mobile tool to be sure my phone was recognized.
2. Move battery out(Optional, by I prefer it if it's possible).
3. Enter Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extract the -workingfirmware.kdz and the firmwareyouwant.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and rename the extracted firmwareyouwant.wdb same as workingfirmware.wdb
5. Start the KDZ update, choosing the workingfirmware.kdz, and when the workingfirmware.wdb file is extracted, replace it immediately with the (now renamed as "workingfirmware.dz") firmwareyouwant.dz
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and asks you to restart. You can replace them then.
Wierd issue from LG, but it worked for me!
Cheers.
Thank You!! It works!
I can confim it works with LG L7 (P700/P705) too.
L9 does not have any file extracted with e610v20.dz name or any file with .DZ extension. Are you sure this is somewhere related to L9 by any chance?
cmahendra said:
L9 does not have any file extracted with e610v20.dz name or any file with .DZ extension. Are you sure this is somewhere related to L9 by any chance?
Click to expand...
Click to collapse
Check P.S.1 and what I wrote below mate
Every LG firmware (.kdz files) is extracted as a .dz file during Firmware installation via LG update tool or KDZ updater.
About the e615 files, it's because I had this issue on a friend's L5-E615, but I'm also posting here because I've tested this on L9 too and it's working if you have this issue. From pms and posts I got, it seems that this works on most lg devices(L3,L5,L7,L9). I just posted here because I own a P760.. I'm just trying to contribute to the L9 community..!
EDIT: Cmahendra was right, the file extensions in L9 is .wdb. My bad, nevertheless the solution is the same...!
Cheers,
Moul
Disclaimer
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
Hello,
Today I tried to Root my V10 using this method: http://forum.xda-developers.com/lg-v10/general/root-h960a-tot-add-systemrooted-t3337706
and now it gets stuck while booting. Is there a way to reflash the Original Firmware? (and keep my files)
I tried the "update error Recovery"-Feature in LG Bridge but the download goes really slow and I don't know if it can help me at all.
I hope someone can help me here
~Dekkia
Hi,
you should try to flash the appropriate KDZ file with LGUP. There is also the possibility to upgrade the phone and keep the data. You'll find the KDZ file and the link to LGUP (including description how to flash) in the first post of this thread: http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348.
Make sure you select the correct KDZ file depending on the version of your phone (H960A for Europe or Middle East).
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 27A, the latest available for the VS990.
You can download it from HERE!
>> UPDATE!! PLEASE READ!! NEW DLL FILE REQUIRED TO FLASH!! <<
Like other recent KDZs from LG, you have to use LGUP to flash this. HOWEVER, you need to update the DLL file that LGUP uses to flash this KDZ. To do this, go HERE and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. Just as a precaution, change the extension of the existing LGUP_Common.dll to .bak or something in case this doesn't work for you. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17.
This is the first time I've come across this issue where I had to update the DLL in order for LGUP to flash the KDZ. Therefore, in the future, when I post links for updated KDZ files for the VS990, I will include the latest DLL file along with the KDZ in the archive.
Enjoy! If anyone has any questions, feel free to hit me up!
Hi, thanks for the files, I always wait for them and use them. However, this time LGUP gives me an error. Can you confirm that the md5 of the unpacked file is 9b59ac2e24b5e5afcbbd0ff35f8665ac?
Yeah I can check when I get home from work this evening and ill let you know.
@xdabobobobo I compared your checksum to mine and they are identical. However I tried flashing this KDZ on my phone and LGUP crashed before it even started flashing so the error you're getting probably isn't checksum related but rather an issue with the version of the DLL file LGUP is using. However I found a solution that worked for me. Go here https://www.androidfilehost.com/?fid=529152257862720559 and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. You may rename the existing LGUP_Common.dll to .bak or something in case this doesn't work. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17. From here, try flashing the KDZ.
Thanks, I confirm that your method has worked. It was the dll indeed, not the kdz.
HI GUYS...
rustypie said:
Hello Verizon V10 Community,
I was able to locate the full KDZ file for the Verizon V10 software version 27A, the latest available for the VS990.
You can download it from HERE!
>> UPDATE!! PLEASE READ!! NEW DLL FILE REQUIRED TO FLASH!! <<
Like other recent KDZs from LG, you have to use LGUP to flash this. HOWEVER, you need to update the DLL file that LGUP uses to flash this KDZ. To do this, go HERE and download the 7z archive. Inside you'll find a dll file, LGUP_Common.dll. Place that DLL file in C:\Program Files (x86)\LG Electronics\LGUP\model\common. Just as a precaution, change the extension of the existing LGUP_Common.dll to .bak or something in case this doesn't work for you. After you put the new DLL file in that folder, open LGUP and in the very lower left hand corner of the window, you should see DLL Version 1.0.28.17.
This is the first time I've come across this issue where I had to update the DLL in order for LGUP to flash the KDZ. Therefore, in the future, when I post links for updated KDZ files for the VS990, I will include the latest DLL file along with the KDZ in the archive.
Enjoy! If anyone has any questions, feel free to hit me up!
Click to expand...
Click to collapse
I USED LGUP WITH NEW DLL TO GO TO 27A MM BUT I WAS ON THE ROOTED .TOT FILE SO NOW I SEEM TO BE STUCK ON THE NEW VERIZON LOGO SCREEN FOREVER. BEINGS WE CAN NOT ROLL BACK, IS THIS A BRICK? I THINK THIS IS WHAT I DID WRONG. :crying:
Anybody know what I can do as stuck on the newer Verizon screen as I was on the rooted .kdz or .tot from lollipop with exposed and used LGUP to put the new .kdz 27a marshmallow on there, now I am stuck at Verizon screen and have no phone.
If I toy with LGUP enough it does recognize the phone still but it will not pass the new verizon screen! ugh..
Hi, thanks for the upload. Ive been getting an error when trying to update it says i cant use the refurbished option. When i tried with upgrade I was able to update but i needed to do a clean install. Any idea what may be wrong?
Thanks
So I got the 27A update to finally work, only problem I have now is when the phone boots afterwards, it shows the android icon with "Erasing..." under it, then reboots and now looping the verizon intro.
Help please?
hii vs990 qcn help...
ı help me vs990 qcn bacup file help.
Okay so, Im trying to reflash my friends LG G5 for her (h831) Ive got flash tools properly installed and running, but when i try to flash it says i have the wrong .DLL file.
Im using the LG Megalock.dll thats everywhere on the internet. Can anybody point me in the right direction?
im not clear on whether each model has its own .dll or if some work on other models or what....lord i wish she had a samgsung. odin is alot more straight forward...
You could try using uppercut from autoprime
Some models need their proper .dll file. Check Autoprime's thread I think those files are there