so i tried iinstalling the newest update for pac but when i first installed the update there was an error saying google process acore stopped working blame tyler. Then I read in another post doing a fresh install would solve the problem but when i did that it still popped up any suggestions on trying to get the new update without this error? Also i swiped dalvik and cache before and after the update but to no prevail.
Related
Looking for bait of advice I have been running version 1.5.4 Foxhound Rom which lately there seems to be an update for every other day.. now the problem is if I want to update to the new version I have to wipe all my data and start fresh if I don't and install the new Rom without wiping everything then it won't boot up and freezes at either the starting apps point or the finishing boot point which is more than little annoying! I've tried to follow the instructions on the thread from here fixed permissions etc etc but it will not play ball.. I've tried updating then restoring my data after and still the same.. any suggestions would be greatly received
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
Hi,
Managed to solve this issue by reinstalling the previous gapps and then reinstalling the firmware. Hope this info helps.
gapps-jb-20121128-signed.zip - I also had problem with this update
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
I also had problem with this update!!!!!!!
Problem with 28 Nov. GooManager received update for Jandycane 1.8
(updates jandycane 20121020 and gapps 20121011 done on 09/11/12)
........................
On 28 November GooManager automatically downloaded the following: gapps-jb-20121128-signed.zip
On the 29 November I flashed this on my first gen. Kindle Fire
As follows:
first did a Backup then wiped Cache and Dalvik and then started update - gapps-jb-20121128-signed.zip
after starting update got a Dalvik cache Directories wipe complete message (then)
Verifying Filesystem....
Verifying partition sizes...
Install ........ gapps-jb-20121128-signed.zip
Finding update package
installing
......
......
(and finally)
Installation Complete!
(then once again under this the texts)
Verifying Filesystem....
Verifying partition sizes...
But there it seems to have stopped (completed?)
And under in TWRP I have the options: Wipe Cache/Dalvik - Home - Reboot System
I decided to choose Reboot system
The following happened:
I got a message "upgrading Android apps"
then it started in the normal ("turning mirror bits") loading window
then the usual password window
but the keyboard wouldn’t open!!! I couldn’t get past the password window
also I notice that the WLAN was no longer on/active (it had been on during the process)
I tried several reboots – still the same
I eventually decide to do a restore of Backup – this was successful!
I have no idea what is or went wrong
Is there something wrong with this gapps-jb-20121128-signed.zip it certainly seems like it?????????
Any other experiences?
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
gyrfalcon said:
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
Click to expand...
Click to collapse
Hi, and thanks for replying - now I know for sure it wasn't me that screwed up, wasn't sure!
Glad to hear that it has been removed - but that's really bad - sending out a really bad update like that - lucky we didn't end up with Bricked devices - really frustrating and not a nice thought at all - I'm really grateful for whoever it is that does all this work...but...putting something like that out ... that is scary ........ don't know if I will now trust the next download(s)!!!!!!!!
who is it that does these gapps anyway?
Total Noob, not sure what I did.
Long story short, rooted my Galaxy Tab 10.1 wifi (p7510) tonight.
Saw a video on how to flash 4.1 onto my tab here: http://www.youtube.com/watch?v=KRjl7zh551w
followed the instructions from the video, it linked to http://forum.xda-developers.com/showthread.php?t=1787399
downloaded the latest nightly from http://get.cm/?device=p4wifi
(cm-10.1-20130124-NIGHTLY-p4wifi.zip )
and the gapps from mirror 1 at http://forum.xda-developers.com/showthread.php?t=1787399
(gapps-jb-20120729.zip)
There was probably my mistake
In any case, i wiped everything, flashed the CM10 and gapps.
On reboot I got 2 error messages,
"Unfortunately, the process com.google.process.gapps has stopped." ok
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Now I have no idea how to recover from this point.
I tried to re-wipe and re-flash my old functioning ICS root and it still reboots into CM loading screen and setup wizard loop
Also, if i attempt to install zip from sdcard my options are:
0/
legacy/
obb/
legacy and obb contain no files and I have to navigate down a couple of layers of 0/ to reach my original root.
Probably screwed myself royally, but I guess that's how you learn. Any advice on how to salvage my tab?
Update*
Restore finds no files to restore
used odin for TWRP instead of CM, still no luck at restoring.
Won't mount USB, so I don't know how to transfer over a different gapps to see if that would solve the problem.
Revert to stock 4.0.4 through odin and start over. Probably be the easiest. I've had to a few times and yes it's how you/we all learn...
Firmware Here
nighthorns said:
Total Noob, not sure what I did.
Long story short, rooted my Galaxy Tab 10.1 wifi (p7510) tonight.
Saw a video on how to flash 4.1 onto my tab here: http://www.youtube.com/watch?v=KRjl7zh551w
followed the instructions from the video, it linked to http://forum.xda-developers.com/showthread.php?t=1787399
downloaded the latest nightly from http://get.cm/?device=p4wifi
(cm-10.1-20130124-NIGHTLY-p4wifi.zip )
and the gapps from mirror 1 at http://forum.xda-developers.com/showthread.php?t=1787399
(gapps-jb-20120729.zip)
There was probably my mistake
In any case, i wiped everything, flashed the CM10 and gapps.
On reboot I got 2 error messages,
"Unfortunately, the process com.google.process.gapps has stopped." ok
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Now I have no idea how to recover from this point.
I tried to re-wipe and re-flash my old functioning ICS root and it still reboots into CM loading screen and setup wizard loop
Also, if i attempt to install zip from sdcard my options are:
0/
legacy/
obb/
legacy and obb contain no files and I have to navigate down a couple of layers of 0/ to reach my original root.
Probably screwed myself royally, but I guess that's how you learn. Any advice on how to salvage my tab?
Update*
Restore finds no files to restore
used odin for TWRP instead of CM, still no luck at restoring.
Won't mount USB, so I don't know how to transfer over a different gapps to see if that would solve the problem.
Click to expand...
Click to collapse
I am in exactly the same situation as you, same build same gapps, same problem.
To help you out, in recovery (CWM) you can mount /data, then using adb on you computer you can push stuff to the "sdcard" via the command "adb push C:\Some\Local\File.zip /data/media/0/File.zip"
Same problem for me. I installed CM10.1 without gapps and it worked without problems. I also tried with different versions of gapps and give all the mentioned problem.
"Unfortunately, the process com.google.process.gapps has stopped." OK
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Does anyone have a solution to this problem.
Thx
Help required if possible!
Hello all, joined just to post here.
I'm having the same issues as detailed in the first post.
A lot of the solutions that I've seen recommend going into settings and turning syncing off but the error messages block me from accessing anything. It eventually just seems to crash itself and turn off anyway, which is probably due to being bombarded with error message popups.
Is there a simple way to fix this without doing a full reset back to 4.0.4 or is that my only choice?
If so then I'm in trouble because I followed the link that mrhiab provided but I can't see which firmware there is the one I need (wifi only galaxy tab 10.1 P7510 uk).
Is the cause of this problem that the version of gapps I installed is broken and causes errors as it worked fine without gapps?
If anyone can answer any of those questions then I'd really appreciate it. I've semi broken my girlfriends tab and she's not too happy lol!
UPDATE/SOLVED:
Just thought I'd comment back and say that I've solved the problem.
I simply reflashed the CM by putting the tab into install mode again but didn't add gapps. After rebooting I noticed that it worked okay so I tried to find another release of gapps and tried that...it worked perfectly - no errors no nothing!
Sorry for the initial noob-post!
same problem as you
sir ... i also have the same problem as you ... i've been searching on almost all sites ... still i can't see any issues that can solve my problem.1st was "unfortunately, google.com.pro ..." then next was "unfortunately, setup wizard has stopped." this results everytime i reboot my galaxytab 2 10.1 .. im on JB 4.1.1 .. and i just followed the guide of sir codeworkx. please lend me a solution.
BTW midgard .. how did you flash CM again w/o the gapps ? because when i go to install zip from sd card ... there's nothing in there .. just obb and stuffs said by the thread maker.
I will appreciate suggestions ... Thanks in advance
I hope some suggestions may come up eventually
I found a way on installing cyanogenmod 10 on my Galaxy tab 2 10.1 by not installing gapps at the same time while installing the CM10 .. but eventually, i found out i don't have any google playstore .. and that's when i googled on how to have one. I found a video saying i could have it by just going to there website via my tablet goo-apps .. then download the existing gapss for my JB 4.1.1 .. and then flash it .. but then again ... the error of the Unfortunately, setup wizard stopped came up again ... help
and thanks midgard !!!
Can I get help
midgar777 said:
Hello all, joined just to post here.
I'm having the same issues as detailed in the first post.
A lot of the solutions that I've seen recommend going into settings and turning syncing off but the error messages block me from accessing anything. It eventually just seems to crash itself and turn off anyway, which is probably due to being bombarded with error message popups.
Is there a simple way to fix this without doing a full reset back to 4.0.4 or is that my only choice?
If so then I'm in trouble because I followed the link that mrhiab provided but I can't see which firmware there is the one I need (wifi only galaxy tab 10.1 P7510 uk).
Is the cause of this problem that the version of gapps I installed is broken and causes errors as it worked fine without gapps?
If anyone can answer any of those questions then I'd really appreciate it. I've semi broken my girlfriends tab and she's not too happy lol!
UPDATE/SOLVED:
Just thought I'd comment back and say that I've solved the problem.
I simply reflashed the CM by putting the tab into install mode again but didn't add gapps. After rebooting I noticed that it worked okay so I tried to find another release of gapps and tried that...it worked perfectly - no errors no nothing!
Sorry for the initial noob-post!
Click to expand...
Click to collapse
I still have that "Unfortunately, Setup Wizard has stopped" loop-message, can somebody help me please!
I am currently running the nightly builds of the carbon ROM, and it has worked great until the last week or so. Lately when ever I try to update to the new nightly build after the update and the android is optimising sequence, when the phone arrives at the home screen I get the following message.
unfortunately com.android.phone has stopped working.
I can't get passed this error making the rom un usable I then have to roll back to a previous backup.
I really want to if I can fix this so I can start moving forward again.
So my question is is the something to do with the way my phone is setup, or is it something wrong it the current builds that the Carbon ROM team are currently pushing out?
Many thanks.
fastfibre said:
I am currently running the nightly builds of the carbon ROM, and it has worked great until the last week or so. Lately when ever I try to update to the new nightly build after the update and the android is optimising sequence, when the phone arrives at the home screen I get the following message.
unfortunately com.android.phone has stopped working.
I can't get passed this error making the rom un usable I then have to roll back to a previous backup.
I really want to if I can fix this so I can start moving forward again.
So my question is is the something to do with the way my phone is setup, or is it something wrong it the current builds that the Carbon ROM team are currently pushing out?
Many thanks.
Click to expand...
Click to collapse
Wipe cache and Dalvik Cache
Sorry it took me so long to respond, I have only just now had a chance to try what you suggested but unfortunately it did not resolve the issue. So I want to reinstall the rom completely, but am not sure where to find the latest gapps for my device.
Many thanks.
I just rooted my HOX+ and installed CWM and flashed 23/06 Carbon nightly on it. For a couple of days everything was fine
until today when it said "Unfortunately.. blah blah.. systemui has stopped working". Every time I boot up the phone it gives me
this message and I can't do anything. Rebooting doesn't help, I tried wiping everything and reflashing, still nothing. I did some
research and found a thread about face unlock might causing this. I disabled the face unlock but didn't work. I don't know if it's
caused by some google app cuz when I reflashed everything, including gapps, first there was no problem, but I think when it was
installing google search the error message came again. Have anyone else experienced this error? Any solutions?
AveEagle said:
I just rooted my HOX+ and installed CWM and flashed 23/06 Carbon nightly on it. For a couple of days everything was fine
until today when it said "Unfortunately.. blah blah.. systemui has stopped working". Every time I boot up the phone it gives me
this message and I can't do anything. Rebooting doesn't help, I tried wiping everything and reflashing, still nothing. I did some
research and found a thread about face unlock might causing this. I disabled the face unlock but didn't work. I don't know if it's
caused by some google app cuz when I reflashed everything, including gapps, first there was no problem, but I think when it was
installing google search the error message came again. Have anyone else experienced this error? Any solutions?
Click to expand...
Click to collapse
Same here. It started yesterday. Tried to flash older and newer ones with full wipe including cache and dalvik cache, but it still does not help.
I flashed a sense rom (ARHD) and wiped nearly everything on the phone before I installed the new rom. I did multiple factory resets, multiple dalvik wipes, multiple cache wipes and I formatted the whole system a few times (=format system). Afterwards I flashed ARHD and my phone works brilliant now. Try this I hope it works on your devices!
I made a fresh install of Carbon on my HOX+ last week (CARBON-KK-NIGHTLY-20140802-1713-enrc2b, fwiw), and it worked just fine up until last night when I encountered this exact problem. The official enrc2b Carbon thread contains a post that would seem to indicate that the problem is with Google Plus (though there isn't much in the way of evidence).
In any case, completely wiping and re-installing the phone appears to be a solution, but I would submit that it's temporary - if the problem is some sort of incompatibility with one or more Google Apps, then the issue will simply return at some point.
Hopefully the root cause will be determined and a fix will be forthcoming. Until then, I suspect we're all just sitting on time-bombs.
i think the problem comes really from the google+ app.
i did a clean install after the crash with the small pa gapps, wich didn't contains the google+ app.
Then i reinstall al my apps one by one except g+ and now everything works perfect again.
It's a little bit more work, but the only way i know to fix..
Hope it helps
I had the same problem with Carbon. I've installed Carbon a view days ago (comming from Mokee) and after the latest G+ Update my SystemUI stopped. A dirty flash didn't solve the problem.
So I restored my Mokee Backup and here everythink is great (with the latest G+ update)