Greatings to all,
I need factory rom for gsmart tuku t2, i need it in odin format, to remove cwm recovery,
I am very disapointed with this device and i tried to flash it with other roms i have succesfuly rooted device with framaroot and then succesfully instaled cwm and i have tried custom roms for rio r1 orange nivo and miui for huawei 8850d, as they are on same chip msm8225 but every time the phone is stuck on boot screen.
after that i have flashed with factory rom and it works again now i want to remove cwm recovery as the cwm is on chinese and i don know chinese...
i have tried with cwm loob disabler and remover but it wont work and as i have only factory zip file i cannot use odin...
and if someone can help me find a way for better sound in conversation it is chopped and canot recognize the words and i canot make conversation is there some way or is this just a bad phone (as for waranty they have sayed to me it is normal as they tried other phones and they have bad sound too) so this is the reason why i have tried to flash phone
I am sorry if this is no place for this post and i have use the search engine for this problem for last 3 days and i cannot find sollution for this....
Thank you very much,
stuck on bootscreen = you have to manually flash boot.img via adb
Related
Hi guys i'm new on this forum, i hope that this is the right section.
I've N9330 with firmware e1901 v77 gq2002tc, the same of this guidehttp://forum.xda-developers.com/showthread.php?t=1966593&page=39
I cannot post directly on the guide because i've not 10 message, so i create this topic.
My troubleshooting starts when i decide to root my smartphone. I followed the guide but it not works properly for me. I've extracted scatter file with MTKdroidtool and then i use this scatter with the rom of Brunoand i put this in cellphone with Spflashtool, the programs says OK.
But when i try to start recovery mode comes only a white screen.
So i've tried with binary tool but it not works so i don't have superuser (for the program it's all ok), then i tried special mode of this tool (it is for tablet i've read), and when my android restart it was a semi resetted, i cannot install apps that i have also before the reset only newer apps. I cannot reset my phone with recovery(it no works) and with restore by settings (it not works).
So i tryed to put with flashtool original recovery of the link. IT NOT WORKS. aaa i'm going crazy
I have made before change recovery a backup but i don't know where is it on sd. What can i do????:laugh:
Sorry for my bad english
The backup is in .backup and it is only of user data. Now if someone give me help or his recovery image..
I want only wipe all data or install su. Please help without my Android i'm lost:crying:
Si there a way to wipe without recovery nor settings?
Finally i ve found my stock ROM. I can flash it with spflashtool bit i m scared if brick my phone. I want only chance recovery. I ve re ad that multi port is good for this. Here si the rom http ://
getwapi.com/ search/go.php? type=all&q=e1901 without space
It is possible that nobody have this problemi? This is only topic on e1901_v77_gq2002tc in english
am having the same kind of problem with same kind of device , i fail to get the rom you posted
help plz
gud day devs.
Ive root my device using vroot.exe using my desktop then install MT6582 repartition.apk(which I found on somewhere in my facebook groups)
then, tap the 1.5gb internal storage and reboot it into stock recovery mode. Then, I select to wipe/factory reset. After that Ive been stuck in android robot with something electricity on its belly.
Can anyone help me to fix this? :crying:
Ive tried to install CWM via SP Flash tool to create back up and restore but it doesnt work.
I tried also to wipe/factory reset on CWM but still not working.
This device is newly released here in PH. So thats why, I cant find any stock rom as of now.
Sorry for my bad english
Same problem here, did you already fix yours?
uopuh7 said:
gud day devs.
Ive root my device using vroot.exe using my desktop then install MT6582 repartition.apk(which I found on somewhere in my facebook groups)
then, tap the 1.5gb internal storage and reboot it into stock recovery mode. Then, I select to wipe/factory reset. After that Ive been stuck in android robot with something electricity on its belly.
Can anyone help me to fix this? :crying:
Ive tried to install CWM via SP Flash tool to create back up and restore but it doesnt work.
I tried also to wipe/factory reset on CWM but still not working.
This device is newly released here in PH. So thats why, I cant find any stock rom as of now.
Sorry for my bad english
Click to expand...
Click to collapse
-Same problem here and phone model, did you already fixed your phone?
hi all i m really looking for help as i am loosing my hope ,first my phone detail
GT-I9100,
2.3.5,
baseband-I9100XXKF1
kernal-2.6.35.7-I9100XXKI3-CL577579
gingerbread.jpkj2..
.now the problem is very wired,i have rooted my phone becoz i see superuser and i have CWM version 3.15 installed,have Rom manager installed but there is no way i can install JB or kitkat ..i tried almost all steps but the one place i always fail is when i try to install clockwork recovery for gt-i9100 via Odin my phone doesn't boot and shows the main screen and exclamation mark then i used a kernel flash as mention in one of the forum to reboot again..
I am amazed to see that when i go into the recovery mode i don't see all the option just 4 general option and that gives me an idea that i dont have CWM installed but then why in my icons i have CWM?? i am confused...i have tried so many times to flash it but but my phone gets soft-brick and again i flash kernel to boot into my device.i am really worried to do any more steps as i feel i will brick my phone now
..my only question is can i install JB,kitkat or any update on this device...if yes then can any one who got my issue can help me one first and last time to get it done...please help:crying:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?
Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Stuck on BootLoop
I am currently facing the same Issue i changed the system/framework (of the CHERRY MOBILE JELLY) with the folder of the SamsungS5 system/framework
cause I was thinking that it'll worked too after changing the system/media of my phone
PLEASE HELP
GUYS
Download and flash the stock ROM with SP flash tools....to will solve all the problems...
the best place to go for any rom for china phones is needrom just google it. I had a jiake v8 phone and this was the only place where i was able to find rom for my phone. good luck ....
I face the same prob!
I have a canvas 2.2 a114 which I bought a few days back . I had been using it very smoothly(not rooted and is new). But suddenly it started to reboot and was stuck at the canvas logo. I have the rom file, but it simply says "Installaton aborted when I load the zip file. help plz! Thanx.
guys the best way to do this is to go to youtube. Find how to port rom to mtk devices or china phones there are plenty of videos. It will be much easier for you to do something when you see how someone is doing it and then you do it for yourself. I have a jiake v8 pphone and this is what i did is not that easy to explain much easier to see.
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Fixed
BrendanWk said:
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Click to expand...
Click to collapse
I was fed up at last and i sent it off to micromax center. They said it was a software prob.
---------- Post added at 09:55 AM ---------- Previous post was at 09:47 AM ----------
Guys I finally figured out (I am new to the android family) that i should install a custom recoery inorder to flash roms. I cant flash roms in stock recovery.