Bought the site parts4repair.com a new motherboard for nokia lumia 800 , at the time of purchase did not I heed me a message which appeared in " And the item is without program site ( you need change flash chip by soldering , Please Ensure you know how to flash this chip soldering before you order . ) we do not offer this flash chip " , after the play be in my hands is that I look why it does not leave a weird picture on the screen , but it binds a black screen with a picture of a sort of manufactures appears . I went on google and typed several things to finally find such said above , in a Nokia factory , where it seems this environment image, look in the phone display
h.t.t.p.://w....w....w....blognokia.com.br/wp-content/uploads/2011/11/2011-11-23_nokia3.jpg
Researched more to know about but until now I did not get much success due to a determiado little knowledge of mobile programming boards , through programs tablet or even BOX ( I still have some doubts , what is the best , which has more appeal and that I can use for various things )
Then I saw also another problem: this new board, without programming seems to be a nokia lumia 800 and it is also without IMEI number ? I think so , hence we have another problem (I think this q by úlitimo be more complicated to solve perhaps impossible )
Could anyone help me , me trying to solve these problems ... I am needing to solve these problems , as I am a new board and stop after you have purchased , the value of U $ 46.00 and now be going through these " problems "
help
Related
im a student from asia.i have dopod 838 pro,i bought it as second hand unit,initially it was great but after one month,give error report when i try to use camera;it is unableto start camera,unable to initialize camera,i did everything i can do,i flashed it using several roms,now i have wm6.5 rom.then i desided to open the phone for check hardware issues,i see near the back camera and flasher port there is oxidised area i tried to clean them with usint contact cleaner,then very small piece of mainboard circuit detached,i think probably it is resister or transister,i was hopeless ,i know i cant repair it.if any one have solution pls help me,i cant make video calls also,r there any trick can i make video call using front camera,if not where can i take mother board,what abt prices,if anyone like to sell or donate there spare mother board or can give advice please,let me my no is +94715319206,[email protected] tx lot pls save me, my phones all other functions work well.
Hey all!
First time posting here!
Have read alot of posts about SMDT, but no help on my problem.
So here it is:
I broke my Star x15i screen recently and bough a new one. New one is said to need a never pair on draivers. They gave those to me.
I followed exactly the guide (really hard to understand this Google Translate Chinese -> English thing).
Took battery out of device, connected DEVICE (Start x15i with replaced LCD)
Installed Cable drivers (MS Win 7 64bit), started 'sp multi-port download tool', Choose Data Source and DA file name. Also chose SCATTER file.
MainSensor NONE, Sub Sensor NONE. Lcd LP043LLYU04A.
Start all. Place battery inside phone
Then i hear this tõtõn (Device connected to Windows sound) and 2-3 seconds after that the other sound (device disconnected).
And then the numbers keeps going, but nothing is loading.
Since no outside image links, i made an attachment
Whats up damn it
190 views but no help?
Damn.. I really need this guys.. :S
hello DaddyStrikes
i have the same problem ....i replaced the new lcd and i facing problems to update the firmware via this tool.
Gud day to all. Does anyone have an extra x15i touch screen pad because my x15i was accidentally sated and broke its pad. ive search all of the repair shop here in philippines and nothing is available but then the internet have plenty of replacement there the problem is I have to bought it online and I have no credit card or ecard etc. to buy it online.
so im asking if there someone who is a good hearted would you please lend me your extra touch screen pad and send it to me?
I well repay you when you travel here in boracay philippines and I can tour you here.
please email with this add.; [email protected]
thank you in advance.
DaddyStrikes said:
Hey all!
First time posting here!
Have read alot of posts about SMDT, but no help on my problem.
So here it is:
I broke my Star x15i screen recently and bough a new one. New one is said to need a never pair on draivers. They gave those to me.
I followed exactly the guide (really hard to understand this Google Translate Chinese -> English thing).
Took battery out of device, connected DEVICE (Start x15i with replaced LCD)
Installed Cable drivers (MS Win 7 64bit), started 'sp multi-port download tool', Choose Data Source and DA file name. Also chose SCATTER file.
MainSensor NONE, Sub Sensor NONE. Lcd LP043LLYU04A.
Start all. Place battery inside phone
Then i hear this tõtõn (Device connected to Windows sound) and 2-3 seconds after that the other sound (device disconnected).
And then the numbers keeps going, but nothing is loading.
Since no outside image links, i made an attachment
Whats up damn it
Click to expand...
Click to collapse
You need to click start (flashing) and then connect your phone. Then you will most likely see DA 100% and get an error just like i did. I just can't manage to flash new lcd driver on my MTK 6592 Star N9800 phone.
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
ib6469 said:
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
Click to expand...
Click to collapse
I just did it last week with no problems on one of our Notes to prepare for sale. Make sure you peel the sticker off the new part to expose adhesive, and be very careful aligning the big connector. Also make sure you get the wire antenna plugged back in all the way. I'd saythe problem is your install but if you can reinstall the original and get back to 1st problem it is weird, obviously at least installing that factory part is going normally.
I used ifixit.com guide to point me in the right direction but it was easy, maybe 15 minutes of work, even being really careful.
I used this part from ebay. With a new battery the old beast is doing great, going on ebay soon.
Good luck!
Thank you
Thank you Delawaredrew,
I saved your supplier , and I will order one from them . THANK YOU FOR YOUR HELP , ib6469.
ib6469 said:
Thank you Delawaredrew,
I saved your supplier , and I will order one from them . THANK YOU FOR YOUR HELP , ib6469.
Click to expand...
Click to collapse
You're welcome!
I read a bunch of reviews of various charging boards when I bought one and many people mentioned peeling the sticker off as a must for proper reception. The wire antenna was a little tricky to reattach, it felt like it was on but looked a little askew; a slight bit more force definitely clicked it in farther. I actually haven't had a SIM in it to verify cell reception but wifi is fine.
Let us know how it goes.
Charge Board Solved
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .
Same problem
ib6469 said:
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .[/QUOT
I was about to buy a new phone. Now I know the problem is related to the power connector repair. Problem is I throw away my broken power connector and did not record the part number.
Click to expand...
Click to collapse
Rr1 said:
ib6469 said:
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .[/QUOT
I was about to buy a new phone. Now I know the problem is related to the power connector repair. Problem is I throw away my broken power connector and did not record the part number.
Click to expand...
Click to collapse
You are correct, there are different revisions on some Samsung charge flex replacements however, usually only 2. Your quickest way to tell, other than the actual revision print on the flex, would be that the interconnect doesn't seem to properly fit or appear as a "loose fit" (or vice versa). As for the adhesive on the bottom, hogwash on affecting the signal. You can have it or not, no difference. It is simply what it is...adhesive. Any signal problems would be caused by the antenna connector not properly seated. Your only other possible causes, if your board revision is correct, would be in your actual handling of the flex during installation. Glad to see people troubleshooting as a group. Feel free to pm me if you have further issues and I will happily try to guide you back to working.
Cheers
Click to expand...
Click to collapse
I am very poor in Brazil and won a used cell phone from nearby, but he was probremas, it lights up and goes 3-4 one second and the kind of fast restart, great device with great screen and Digital TV. It seems to me that it is MTK 6236 chip. Alçguem if you have a soluçãoi formatting appreciate it, I've tried the SP Tools MTK but it seems he does not recognize ... Cause it off when I put the computer in USB drive and install the flash him appears on my computer .. 2 but one is in 0KB precisely 1GB
The reason for posting here is because my phone is not on the list. THANK YOU
Coffman64 said:
I am very poor in Brazil and won a used cell phone from nearby, but he was probremas, it lights up and goes 3-4 one second and the kind of fast restart, great device with great screen and Digital TV. It seems to me that it is MTK 6236 chip. Alçguem if you have a soluçãoi formatting appreciate it, I've tried the SP Tools MTK but it seems he does not recognize ... Cause it off when I put the computer in USB drive and install the flash him appears on my computer .. 2 but one is in 0KB precisely 1GB
The reason for posting here is because my phone is not on the list. THANK YOU
Click to expand...
Click to collapse
Your way off if has that chip it is certainly not an S4. If you say it if then it's a fake bootleg one. Not gonna get any help around here. Go to Google search "xda phonemodelhere" you will probably have to drop the xda part because your in the wrong place.
Sent from my SCH-I545 using Tapatalk
I'm sorry friend,
xxxtncxxx said:
Your way off if has that chip it is certainly not an S4. If you say it if then it's a fake bootleg one. Not gonna get any help around here. Go to Google search "xda phonemodelhere" you will probably have to drop the xda part because your in the wrong place.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Sorry buddy, I posted in the wrong place because they do not have my phone on the list .. My phone is not android is one common system of China. I saw right is china MT6235 320MHz processor, it enters the system but then immediately restarts. I have to use another firmware of a similar device?
Coffman64 said:
Sorry buddy, I posted in the wrong place because they do not have my phone on the list .. My phone is not android is one common system of China. I saw right is china MT6235 320MHz processor, it enters the system but then immediately restarts. I have to use another firmware of a similar device?
Click to expand...
Click to collapse
Installing firmware not intended for your phone will most likely brick it. I would NOT recommend trying a "similar device".
First, you'll need to find how to flash your phone. If there's nothing on XDA, I would start with the manufacturer's site: gradiente.com.br
http://www.gradiente.com.br/smartph...wi-fi-bluetooth-e-camera-30mp-preto-14.aspx/p
I haven't found any firmware files on the net for this phone, but can't read Portuguese so may have missed some hits.
thanks for the reply
Gradient did not really firmware for this device , however she is working on hardware already enxiste in china , As his famous phone but the iphone which is based on a Chinese Dai hardware ... I 'm starting to think if I find the hardware she used this GC- 300 I could handle the flash she drew ... I'm trying to connect the serial port to give a flash of identical hardware however famous but it has flash ... in his plate has the following pins ( pwr , vdd , gnd ) ( TX , RX , GND , KCO , VBAT ) which pins should I use to connect to the serial port ? I used the TX , RX , GND but gave no sign of life on the computer ... This device is off when the USB it recognizes the pc as Midiatek and enters the internal memory is 45MB put it that when I turn the unit it disconnects the the USB ... FlashTool programs would not recognize him ... Ways to Hard reset one of these Chinese plates simply eliminating all enegia contained in ceramic capacitors ?
hi people,
the digitizer literally jumped out of my phone , with the summer heat . I went to the store and they ask for money to give me a budget that would probably be almost the value of the phone according to the employee. so I gave up the idea of fixing it and put away. now occured to me the idea of doing a multimedia system for my car with a navigation system and so. so far so good right?
here come the problems ... my pc ( ubuntu os) does not recognize it , I can not download the drivers because I do not know who manufactures it , and the store does not have the capacity to give me technical support . awesome !
I try otg mouse, I try adb tools, I try tons of things, nothing...
however, I know the phone is base on Broadcom 21664 Dual Core platform, and is running an android 4.2 version called 'hawaii' I think...
else, I did root the phone but for some reason it returned to the factory settings and is like it was first turned on.
what can I do?
tanks