Yesterday I wanted to see if there is an update to my phone, and it was. I downloaded the update (my other update at about 3 months ago was 550 MB and this was 35 MB) and when i wanted to install it my phone restarted and started to display that android icon (like the other update) but somenthing is different this time, THE PHONE KEEPS SHUTING DOWN AND DIPLAYING THAT ICON over and over again, it doesn't even start the upgrade cuz it shuts down. Please help me with this problem I don't know what to do, i didn't even shut down the phone cuz I was afraid it will get an error. Please help me. (My android version was 4.1.2 before the update, now I don't know)
P.S. The phone is not recognized by the pc
blackmanta45 said:
Yesterday I wanted to see if there is an update to my phone, and it was. I downloaded the update (my other update at about 3 months ago was 550 MB and this was 35 MB) and when i wanted to install it my phone restarted and started to display that android icon (like the other update) but somenthing is different this time, THE PHONE KEEPS SHUTING DOWN AND DIPLAYING THAT ICON over and over again, it doesn't even start the upgrade cuz it shuts down. Please help me with this problem I don't know what to do, i didn't even shut down the phone cuz I was afraid it will get an error. Please help me. (My android version was 4.1.2 before the update, now I don't know)
P.S. The phone is not recognized by the pc
Click to expand...
Click to collapse
you stuck in update. remove battery and switch on phone if still not starting phone then follow this recovery wipe data and cache but you will loose all your data
Related
Hi guys,
I was trying to upgrade to Android 2.3 on my Sharp Softbank 005SH but the phone got stuck in the Major Update screen and I don't know what to do now. Anyone with experience please help!
The phone is updated to the latest firmware that is required for this major update, Build No. S0900.
So, I decided to go for the PC upgrade option, Downloaded the driver and the Update tool, waited for many hours for the download to complete, then started the procedure.
I then switched the phone to Fast File Transfer USB mode, checked for update, it discovered that an update was available and asked me to restart the phone.
After restarting, I ran the Update tool but it gets stuck at the screen where it checks if the phone is connected in the above USB mode.
Meanwhile, the phone won't reboot in normal mode. If I pull the USB cable out, it says "Update failed. After a reboot the phone will work again." Well, it doesn't because I can't reboot. Even tried removing the battery for a couple of minutes...
same to you
just update my dm009sh from s0300.....failed
guaiwujia said:
same to you
just update my dm009sh from s0300.....failed
Click to expand...
Click to collapse
I've sent my phone back to Japan. Hopefully, they'll fix it there soon.
Obviously, the problem occurs because the phone and/or the OS are not in Japanese.
Hello,
I started OTA update to android 3.2 on my dads galaxy tab 10.1 3G (original rom and unrooted, it downloaded successfully (89 or so megabytes).
Then it restarted and updated with no problems, but then notice came up that another update is possible (~39 megabyte size).
So I downloaded it and galaxy restarted to install update.
And now it is stuck at 22 percent on logo screen almost for 1 and a half hours...
What do I do?
I believe resetting it manually is far from safe?
Good lord, why do you use OTA update. There's the downloadable which is more stable , And Odin > Kies by a long shot, a very long one.
I didn't know better...
The thing is still on
I think you can cut it off? I'm pretty sure it needs to download it all, then install it first making it safe
Thanks,
I disconnected the thing and next reboot update went as it should, although very slow.
Hey guys! This is my first thread here, but I knew this site before. I've got an M4 Aqua E2303, Android 5.0, Build 26.1.A.2.167 (upgraded from .99 with TWRP to keep the root.).
The story : I've got this phone like 4 months ago, I was so happy etc... After it updated to 5.0 it kept restarting randomly. Total random, when it was not under using, if I use it, it does not restart itself. Sometimes the restarts occurs when it's under charging, and sometimes when I want to unlock it and use it, and sometimes total randomly, and sometimes it shuts down. For different verions the problem was different too. On 26.1.A.2.99 it was the worst, it restarded and stuck on the boot screen until reached 0% battery. On 26.1.A.2.128 It turend off the screen, but the phone was running and the LED was red (even when fully charged) and only started with the hard off button in the SD card slot.
I've got the default "Diagnostics" app, now it says that the Phone got system errors 42 times in 10 days. It was worse before (over 140). But it doesn't say why did it restart, I'm hoping for help from any of you, who had this issue and solved it, or someone who knows a better diagnostic tool that will explain what caused the system fault.
I appreciate all the helps!
Have you performed a factory reset? (It will delete all your data and apps)
rp-x1 said:
Have you performed a factory reset? (It will delete all your data and apps)
Click to expand...
Click to collapse
Yes, when the phone was new and the restarts were annoying. It fixed it for 1 day. The next day it was restarting again.
This would point to an app you've installed causing the issue. Factory reset again and install each app one by one until the restarts happen to find out which.
SteveTM said:
Hey guys! This is my first thread here, but I knew this site before. I've got an M4 Aqua E2303, Android 5.0, Build 26.1.A.2.167 (upgraded from .99 with TWRP to keep the root.).
The story : I've got this phone like 4 months ago, I was so happy etc... After it updated to 5.0 it kept restarting randomly. Total random, when it was not under using, if I use it, it does not restart itself. Sometimes the restarts occurs when it's under charging, and sometimes when I want to unlock it and use it, and sometimes total randomly, and sometimes it shuts down. For different verions the problem was different too. On 26.1.A.2.99 it was the worst, it restarded and stuck on the boot screen until reached 0% battery. On 26.1.A.2.128 It turend off the screen, but the phone was running and the LED was red (even when fully charged) and only started with the hard off button in the SD card slot.
I've got the default "Diagnostics" app, now it says that the Phone got system errors 42 times in 10 days. It was worse before (over 140). But it doesn't say why did it restart, I'm hoping for help from any of you, who had this issue and solved it, or someone who knows a better diagnostic tool that will explain what caused the system fault.
I appreciate all the helps!
Click to expand...
Click to collapse
If you used the pre-rooted zip to maintain root while updating to the latest android, this will fix your rebooting problem. Follow this guide:
http://forum.xda-developers.com/m4-aqua/general/guide-fixing-random-gplay-app-install-t3338362
cmstew said:
If you used the pre-rooted zip to maintain root while updating to the latest android, this will fix your rebooting problem. Follow this guide:
http://forum.xda-developers.com/m4-aqua/general/guide-fixing-random-gplay-app-install-t3338362
Click to expand...
Click to collapse
Will try it when I'll have time for it, thanks for the help!
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Hello,
As we know Marshmallow update arrived , I had no problem recieving MM update to my E2353. i updated the phone using sony companion and it updated normal, nothing occured , i didn't made any mistakes..nothing.
So after update it turned off and boot up like normally it do,
First boot up took long time , like 20-30 mins and phone heated for some extent.
I did normal stuff such as connecting wifi etc, after that i restarted and it took around 20-40 mins to turn on again...
after turning on battery life is very poor..also every sensor of the phone are not working, no auto rotation, nothing.. now every time i turn it on it take 20-40 mins, battery is awful, it feel like its dieing after the MM update
couldnt find anyone with this problem with official update at all.
NOTE : i did rooted this an year ago without any problems and unrooted it after doing so without any problems.
i recieved MM original update.
current build no - 26.3.A.0.131
i've reinstalled (resetted) using sony update service which redownload the MM . it had no effect
Thank u very much !
Try flashing the marshmallow rom from XperiaFirm, it's a pretty easy process, look it up on google
DarkerJava said:
Try flashing the marshmallow rom from XperiaFirm, it's a pretty easy process, look it up on google
Click to expand...
Click to collapse
Did that, it's still the same... boot up takes long ass time still :/
factory reset
and if not working, try to shut down your phone for a minute and power on again