Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Related
Hi Everyone,
I have the Motorola Razr XT910 with Android version 2.3.6 (the latest update). I had issues with the signal since last update mid February. So after so many trials to solve the issue, I decided to do a factory resetting yesterday.What happened is the signal became better, but I receive a continuous message whenever I connect to the internet. The message says "Sorry! The process com.motorola.service.main has stopped unexpectedly, please try again." So I have to force close. I tried to search for a solution in the net but no help.
Kindly help me
flupo2000 said:
Hi Everyone,
I have the Motorola Razr XT910 with Android version 2.3.6 (the latest update). I had issues with the signal since last update mid February. So after so many trials to solve the issue, I decided to do a factory resetting yesterday.What happened is the signal became better, but I receive a continuous message whenever I connect to the internet. The message says "Sorry! The process com.motorola.service.main has stopped unexpectedly, please try again." So I have to force close. I tried to search for a solution in the net but no help.
Kindly help me
Click to expand...
Click to collapse
If you're rooted I would boot into recovery and wipe cache/system etc.
If you're not and don't plan to, then the only thing I think you would be able to do and hope it works would be to format internal storage and remove your SD card, do another factory restore and see if that clears it up.
Otherwise you're probably going to need to root so you have more control over the internal data to wipe and start fresh.
That process that is crashing is a core piece of the operating system. Something got borked along the way for some reason. Don't fret someone here much smarter than myself will be able to help you, just not at 11:30pm at night
IdowhatIwant said:
If you're rooted I would boot into recovery and wipe cache/system etc.
If you're not and don't plan to, then the only thing I think you would be able to do and hope it works would be to format internal storage and remove your SD card, do another factory restore and see if that clears it up.
Otherwise you're probably going to need to root so you have more control over the internal data to wipe and start fresh.
That process that is crashing is a core piece of the operating system. Something got borked along the way for some reason. Don't fret someone here much smarter than myself will be able to help you, just not at 11:30pm at night
Click to expand...
Click to collapse
Thanks for the help.
My Razr is not rooted so I'll try the 2nd option.
BTW, I'm in overseas now and it is morning time here.
Before Christmas I tried to do a OTA update on my Prime, which has not been successful and I have not been able to use the Prime since.
It has previously been rooted and previously have always been successful in using Voodoo OTA Rootkeeper to retain root after updates. I've not unlocked the Prime.
Now when I try to boot it spends a while 'optimizing' the applications (as if it was the first time i've booted it since the update), and then once it is started, no apps will startup, all of them resulting in saying "unfortunately xyz has stopped"
A video of the problem: youtu.be/e1yfTtGiR78 (sorry can't post full link as am a new user).
I'd like to get it working again, possibly installing the Androwook ROM (or at the very least, just working on the stock rom). What steps do I need to do from where I am at the moment?
There are many threads about flashing roms, brick-fixing (some more up to date than others), but I'd just like a bit of advice about this problem and what I should do next (maybe some good links?). I haven’t gone near doing any flashing on the Prime, and it would be nice to seperate the things I could do, from the things I -should- do (I don't know where to start).
I believe as the Nvidida logo is on the bottom right this means I'm on the JB bootloader? Currently the settings menu shows I'm on android 4.1.1, but not sure if this is pre or post the failed update.
Thanks for any help,
Steve
A factory reset will fix you up. You'll lose your data
Hold vol down + power when booting to access the boatloader menu. Select wipe with vol down and use vol up to confirm.
Hi,
Thanks, I've done the reset, but I still seem to have the same problem.
imageshack.us/photo/my-images/502/imag0217c.jpg
I can't actually proceed throuh the inital set up, because it closes itself when it gets to the account setup page.
Any ideas?
I have resolved this.
I downloaded the latest firmware from the ASUS support website, extracted the zip file from within the downloaded zip file and renamed it to EP201_SDUPDATE.ZIP .
Put this on a microSD card (which I had formatted to FAT32), inserted it into the Prime, then booted into the bootloader menu.
Selected the RCK option, it did the update, and 10 minutes later it was up and running again.
From what I have read, it won't try to complete the update if it thinks you have already got that version installed already, but I guess it knew it hadn't successfully completed the update previously.
Glad it's working again.
Hi!
I got some major problems with my G3. I was on stock Android 6 (rooted). Worked fine for some months. Then I decided to encrypt the phone and activated this option in the normal android settings. After some time the phone restarted and I got the "Encryption unsucccessful" page and cannot do anything anymore.
After reading through the help forums I tried the following steps to solve it:
- factory reset
- wipe eveything in twrp and flashed system, boot, modem manually to Android 6 again
- repaired all filesystem partitions in twrp
- many many more factory resets
All didn't help. The only thing that changed is that when coming to the "Encryption unsucccessful" page now the phone hangs up after the next option I choose (shut down or restart or factory reset) so I have to take out the battery to restart or shut down.
Any suggestions how to solve it and maybe also any suggestions what might have gone wrong? Don't want to kill the next phone the same way by just enabling encryption!?
Sup guys, so i just had a really strange problem that popped out randomly, i was watching a youtube video and i had to help a person quickly and when i came back just a minute later i saw my phone showing encryption unsuccessfull when i pressed the power button to turn my screen on. Well it said to factory reset my phone, i don't store any important data on my phone anyways so i just went for it, and it restarted went to my TWRP recovery and tried factory reseting it, to no success. It basically failed to access /data/ and other directories and i can't see any files in them through recovery. And so i can't even factory reset it, i can't install a ROM cause the partition is corrupt i assume. How can i "unbrick" this? I was running the good old Temaseks CM 12.1 ROM, has been working fine for a looong time. My PC recognizes the phone but i can't access any data, it just shows that it's connected, odin doesn't recognize it.
Can somebody help me please ? I use my phone alot and it's really important.
Hello!
My dad was using Nokia 7.1 for a while but recently he asked for help with his phone which is constanlty restarting... Looking into other threads, I can see it is kind of known problem, so I hope you can help me somehow. The phone is running now on 00WW_3_51F. He doesn't remember what was recently done with the phone but I guess he simply updated it do Android 9.0... When I power on the phone, it boots correctly but restarts after few seconds (sometimes it's longer, up to 1 minute).
- I have already reseted phone to factory default but problem remained.
- I have tried to boot it in safe mode but same problem occurred.
I managed to access Settings>Advanced>Updates and noticed that there is an update available (V3.54H) with size 1299.4 MB. When I started to download it, phone crashed...
I was able to download V3.54H OTA from another thread in this forum with size 119MB (pretty weird...) and I am wondering if there is any chance to update it manually from SD Card or Fastboot. Assuming there is V3.51F version installed, can I simply execute command fastboot update update.zip in fastboot? Will it install only this patch to exisiting OS or replace it?
Do you have any other ideas how to fix it?
Thanks!