Ok so i previously flashed to both 4.2 and 4.3 JB roms, I then flashed to the newer kitkat cm11 rom and everything worked fine for about 3 days and all of a sudden google apps stopped accepting mobile data and only wifi would work. I then attempted to flash back to 4.3.1 and got the build prop error which is where i am now stuck. I have successfully got back to EH03 but anytime i follow the guide to flash to a JB rom i get the build prop error or if i remove that check from the zip it begins installing the rom and resets 3 seconds later to get stuck in bootloop only showing kernal and "Samsung CWM" screen. What am i missing here? thanks in advance.
I had this same problem. I just flashed the a 4.3 devil kernel from hhp's thread in the general section, rebooted to recovery, then flashed back to a 4.3 ROM.
Sent from my SCH-I500 using xda app-developers app
m3fletcher3 said:
Ok so i previously flashed to both 4.2 and 4.3 JB roms, I then flashed to the newer kitkat cm11 rom and everything worked fine for about 3 days and all of a sudden google apps stopped accepting mobile data and only wifi would work. I then attempted to flash back to 4.3.1 and got the build prop error which is where i am now stuck. I have successfully got back to EH03 but anytime i follow the guide to flash to a JB rom i get the build prop error or if i remove that check from the zip it begins installing the rom and resets 3 seconds later to get stuck in bootloop only showing kernal and "Samsung CWM" screen. What am i missing here? thanks in advance.
Click to expand...
Click to collapse
I always flash the sc3 rom before flashing a jb rom. Always works for me. If I don't flash, then I have problems depending on which jb rom i try to flash.
Related
I am trying to install the jellybam 3.0.0 rom and am having no luck. I tried just following inst and that didn't work after about 45 sec the android guy fell over and a red triangle popped up. Then I saw you might have to change to siyah 4.3.3 so I downloaded the zip without micswap and flashed it after the Jellybam rom. Still no luck the rom loaded, but when I rebooted the ics symbol showed up then phone turned of. Can someone tell me how to get this to work. I have the ported version and works fine.
Any help would be greatly appreciated. Also thanks for all you guys and gals do your awsome.
Can't install Jellybam???
fountain79 said:
I am trying to install the jellybam 3.0.0 rom and am having no luck. I tried just following inst and that didn't work after about 45 sec the android guy fell over and a red triangle popped up. Then I saw you might have to change to siyah 4.3.3 so I downloaded the zip without micswap and flashed it after the Jellybam rom. Still no luck the rom loaded, but when I rebooted the ics symbol showed up then phone turned of. Can someone tell me how to get this to work. I have the ported version and works fine.
Any help would be greatly appreciated. Also thanks for all you guys and gals do your awsome.
Click to expand...
Click to collapse
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Thanks
Aayush_13 said:
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Click to expand...
Click to collapse
Trying now...
Its working
Aayush_13 said:
I had the same error....i guess you must be getting a "status 7" error while flashing jellybam.....
I used to run SHOstock3 rom v1.4, and i got the same error while flashing jellybam, so i follwed the method given by one of the experts...
1. I did a factory reset, and flashed jellybam, after which i got a status 7 error...
2. I restored the rom via CWM
3. Flashed siyah v3.4.2 with micswap..
4. since that was siyah ics, i could not use my phone, but i was able to flash jellybam over it.....
5. Im running Jellybam without any bugs...
So basically, you can do a full wipe, flash siyah, and then flash J'bam......else use an older version of siyah like i did....Hope u r problem is solved....
Click to expand...
Click to collapse
Thanks again for sharing the info very helpful.
did that work
fountain79 said:
Thanks again for sharing the info very helpful.
Click to expand...
Click to collapse
Hi All
Did the method of installing Siyah Kernel and then flashing JellyBam work to resolve "error code 7" issue ??
So i think i soft bricked my phone when i went to update from jellybam 6.4.0 to 6.6.0. I was using Jellybam 6.4.0 with Ajk 1.24b kernel. Went to flash Jellybam 6.6.0 then ran into problems. First when i selected the zip to flash it gave me the Assert failed: getprop("ro.product.device"). So i went to just reboot the phone and it hangs up on the AJK boot image. I then did a factory reset and tried reflashing the Kernel but it hangs on the Boot still. I can get into recovery and download just fine but can't boot up the phone. So any advice or am i looking at an odin/heimdall trip back to stock.
You don't have a ROM installed, that's why your phone won't boot: just flash a new one.
Sent from the i777
SteveMurphy said:
You don't have a ROM installed, that's why your phone won't boot: just flash a new one.
Sent from the i777
Click to expand...
Click to collapse
The problem is all fixed now. The kernel was the hang up but not sure why. It wouldnt let me flash the new ROM or a backup of the old ROM. Had to put the stock kernel back on the phone through recovery then flash the backup. When i did the update process again all went well.
So I flashed cm10 mod on my amaze and had made a backup.somehow the cm10 didn't work as i thought it would so i restored to my previous rom(ics) then I tried to flash the speed butter 9.0 rom and then again i restored back to ICS.then lastly i flashed Aokp rom but it kept saying ""the process com.android.phone has stopped" so I restored it to my stock rom(ICS).When I rebooted,it got stuck at htc t mobile android screen. Please help
First off are you s-on or off? Also, what recovery are you using..
4EXT and S on.Apparently I have managed to save my device. What happened was that,I relocked the boot loader,downloaded the latest stock ruu and flashed it through the HTC amaze tool kit. All of the roms which I tried had problems,cm 10 would freeze a bit if I would swipe on the home screen,speed rom 9,wouldn't show me contacts when I would type a name and AOKP jelly bean rom kept giving me the "the process com.android.phone has stopped" error" . I don't think I will ever try flashing a custom rom now. But I wonder why it got stuck at boot screen when I restored the stock ICS rom in the end?. I thank you for your reply.
wahid beg said:
4EXT and S on.Apparently I have managed to save my device. What happened was that,I relocked the boot loader,downloaded the latest stock ruu and flashed it through the HTC amaze tool kit. All of the roms which I tried had problems,cm 10 would freeze a bit if I would swipe on the home screen,speed rom 9,wouldn't show me contacts when I would type a name and AOKP jelly bean rom kept giving me the "the process com.android.phone has stopped" error" . I don't think I will ever try flashing a custom rom now. But I wonder why it got stuck at boot screen when I restored the stock ICS rom in the end?. I thank you for your reply.
Click to expand...
Click to collapse
I think the problem was that when you flashed cm10 and aokp etc, 4ext flashed the cm kernel (obviously). But what 4ext is unable to do is restore a kernel (boot.img) when you are simply restoring a backup. Therefore you still had the cm kernel which isnt compatible with your stock rom you have backed up.
I think if you had just found a download for the stock ics kernel and flashed it you would have been fine. Or of course simply flashing the RUU will usually always fix anything too
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884
I've just tried this, didn't work also. I even had to flash the recovery and the kernel again after trying to flash the file in the link, because the phone wouldn't boot normal or in recovery mode.
mcb25 said:
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
Click to expand...
Click to collapse
Try using philz recovery on your phone. It should flash most ROMs fine.
gsstudios
gsstudios said:
Try using philz recovery on your phone. It should flash most ROMs fine.
Click to expand...
Click to collapse
I just did, I still get the Status 7 error. I tried to flash the cm 12.1 and the cm 13.0 nightly rom. I also tried deleting the assert command in the updater-script file but it still won't work. There was no Status 7 error but it still said "Installation aborted".
Does anyone else got an idea how to fix this?
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
mcb25 said:
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
Click to expand...
Click to collapse
Apologies, I only just noticed you have a i9100g, not a i9100. You can't just flash i9100 kernels as they simply won't work!
You can follow the guide in the CM13 OP here:
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-13-0-t3381511
gsstudios
Hello all. After trying to get various Custom ROMs working, CM 11, 13 or Slimkat 9, unofficial 9.1, no version worked properly with phone signal.. I ended up experimenting with flashing modems or going back to stock firmware and doing all the steps from there but still couldn't make it work.
Stock firmware that came with the phone 4.1.2 (KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship) was perfectly fine also (I9300XXUGPE1_I9300AMNGPF1_I9300BVUGNB2_HOME) which it's 4.3 from orange spain was fine, tried one from my country and ran fine, also 4.3. Then I found out about this thread:
https://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 and by mistake I flashed first the patched modem following this order of events :
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > all fine but no signal. Then:
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > flashed patched modem from thread above, boot loop.
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
How should i proceed now?
Thank you, I hope you can help or advice me.
EDIT 1: I also tried to flash the firmware from the above thread, the i9300 UK (BTU) but no luck.
GU37 said:
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
Click to expand...
Click to collapse
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
audit13 said:
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
Click to expand...
Click to collapse
Hey again audit13. It can flash the ROM fine but it gets stuck in boot loop. I'm trying to find the stock ROM with the 3 files but no luck yet, im hoping that can get to do a proper reset factory of everything.
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
audit13 said:
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
Click to expand...
Click to collapse
This one ?
Code:
Date
2016-08-01
Country/Carrier
Spain (Orange)
Version
4.3
PDA
I9300XXUGPE1
CSC
I9300AMNGPF1
This one gets to passed the first time the loop till android updating apps dialogue, then goes to boot loop.
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
audit13 said:
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
Click to expand...
Click to collapse
Wiped, then did a reboot in the default recovery mode. All went to normal again. I still need to figure out how to get a Custom ROM without screwing up everything again.. Thanks for your quick support.
Glad you got it working. One thing I would not recommend is flashing a patched modem. The stock modem is the best modem in my opinion.