Hi
Anyone know where I can download the title file?
My cousin's tablet is stuck in some infinite loop on the PrestigioWizard. After the Wi-Fi screen it keeps returning back to Welcome screen after displaying "Unfortunately, PrestigioWizard has stopped." message.
I manage to get into settings through system tray and tried both "Factory data reset" and "Recovery Mode" to no vail. The image from Prestigio website doesn't help either. The cool utility, PhoenixCard Tool included in there requires I burn the image from a PC with a single slot card reader. Not sure where to get a PC like that in this moment in history. Although I manage to burn this image on the micro SD card from Linux using the dd command, the tablet gives the "Damaged SD card" message when I try to boot from it, but it can mount the same SD card after I re-format it back to FAT32.
ADB can install applications onto the tablet and they get listed in the Apps section in Settings but there is no way to run them from the tablet because Prestigio Wizard is in front of the launcher.
So, I believe a *.zip ROM will help by flashing it from recovery mode and any link(s) will be highly appreciated.
Related
Everytime i try to copy a large file to my phone i usually get the following message:
"the device has either stopped responding or been disconnected"
in particular i am trying to copy an android build to my sd card so i can test it.
PS: i was trying to format my sd card, but i couldnt find the "sd card format" in the settings...
i am running energy rom (august) and soon will be updated to the latest version
either connect in disk mode, not activesync mode, or use a card reader.
is it possible to tell me how to find the menu to switch to disk mode? tbh im kinda lost in the settings with the energy rom :/
edit: nvm. i think i got it. thanks for the reply mate!
I was on nand android and wanted to reset phone to stock rom(selling my phone).
So I downloaded and put LEOIMG.nbh to my sdcard and then pressed reset button. After that i booted to bootloader and it asked something lik: "u want to apply update from sd" and i pressed "yes". Then it installed something and after that it booted to bootloader and showed the message as in image I included.
Second image is what it shows when i try to install nbh from sd card.
What should i do to get my phone to stock again?
E: if i try to install any .exe roms it goes few percents and then my phone disconnects and flashing stops
Did you download the correct stock ROM?
Did you correctly decompress the RUU.exe file?
Did you use a large SD card? Sometimes, bigger than 2 (up to 8) GB does not work. Furthermore, the card should be formatted FAT32, and the ROM image should be in the root directory - but only 1 ROM image.
Can someone please help me?
I have the same problem after formatting my sd card and trying to remove hspl, now it says "Not allow" when i turn my phone on and then displays the same as OP's phone, I'm freaking out, i don't know how to access SD card when i can't turn on my phone please help :[
TomaToz said:
Can someone please help me?
I have the same problem after formatting my sd card and trying to remove hspl, now it says "Not allow" when i turn my phone on and then displays the same as OP's phone, I'm freaking out, i don't know how to access SD card when i can't turn on my phone please help :[
Click to expand...
Click to collapse
Problem solved. To me Installing hspl4 worked.
Try download here:http://forum.xda-developers.com/attachment.php?attachmentid=522738&d=1298225404
lost winmo 6.5
I have (had?) an EU HD2 (with original ROM and RADIO). I had problem with blutooth, after 2 mins disconnected.
I thought the factory reset is a good idea to solve my problem. After factory reset (settings ->security -> factory reset -> 1234) my phone lost the winmo 6.5 cab files. Now there is only SENSE (MANILA) on my phone, and HD2 is looking for cab files on Windows folder.
I downloaded the cab files from internet, but with Actyvsinc I can't find Windows folder. I tried to take cab files to root or in other folders or to memory card. Not works. Without Windows Mobile - File explorer - I can't run cab files on device.
I tried run RUU from my PC, but I had ERROR CODE: INVALID VENDER ID
I tried this process too: 3w.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video without any result.
After reboot - after error message - the phone try to find WiFi access point. Is its possible, that automaticaly will download the missing cab files? (at home I don't have WiFi router)
I tried with those files:
htc_leo_wm65_5in1_eeu_1_66_v02_1.cab
htc_leo_wm65_5in1_eeu_1_66_v02_2.cab
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe (same like my phone's)
Can someone help me?
Problem - I have a Onda tablet V719 that has its pattern locked. I don't know the pattern to unlock, nor do I remember the google account information to unlock it. USB debugging is NOT turned on so I cannot reach it via ADB, and it's not setup as a disk drive so simply attaching to a PC isn't a solution either.
Possible Solution - After lots of research, I've found a possible solution where I A - Mount and storage>> Mount Everything>> Mount System>> Mount data>>Mount afs>>Mount Preload>>Mount SDcard>> Mount ExternalSD>> go back>> Install zip from SDcard>>Choose zip from external SDcard and install Aromafm in Android System Recovery.
Reason the above is not working - I've downloaded each file, placed them on a micro SD card via an adapter, and put them into the phone. After booting into the recovery console and going to the Update via SD Card option, I do not see any of the files on the SD card. I've gone as far as to boot the phone into recovery without the SD card installed and I literally see the same data. in short - I cannot get the SD card files to show up in the recovery console (this is a stupid problem to have and I'm hoping I'm just missing something).
Hello, I rooted my ICOO iCou D70G2 and managed to softbrick it into a loop at the Android messages. I bought another, identical tablet, and would now like to clone the new one into the old. I would very much appreciate complete, newbie level instructions on how this can be done.
Here is what I have tried so far.
I looked for a stock ROM for this device, but can't find one. The closest out there I could locate is for a D70Pro II. I don't know if it will work, and in any case, I still can't figure out how to flash the old tablet.
The old tablet does go into recovery mode using vol up and power. I tried putting the Pro II flash on the micro sd card (tried both img and zip, separate times), but the tablet isn't seeing the micro sd card in recovery mode with the update from sd card option. It shows a folder /sdcard with some seemingly empty subfolders, but even if I take out the micro sd card it shows the same set of folders and says choose a package.
I tried using the Intel USB drivers with adb, but the device isn't recognized in recovery mode by adb. Rockchip Batch Tools 1.8 also doesn't see the device, although it seems to load the ProII img file correctly.
It would be really great to get this old tablet to work. I don't have any CWM, TWRP or any other backup software on either device at this point. The new device is new from the box and not rooted.
Hi, ive got this old bricked tablet, cant enter recovery mode, not recognized in windows when in fastboot mode, nothing working basicaly,
i want to flash it and i CAN'T, its getting frustrating after 3 days i decided to ask help here!
this is where im stuck:
i want to use Rockchip SD disk tool 1.59 to make a bootable SD card for automatic flashing.
First sd card not working, SD disk tool keeps saying loading firmware failed, ok buy a new SD card San disk 16gb
perfect it works!i managed to create a bootable flash IMG but its not flashing or doing anything when powered on with sd in it.
so i try to reflash it on the card, and it keeps giving error again now even on the new SD card : Loading firmware failed! I tried using SD card formatter to format the card, still loading firmware failed!
somebody please help me before i lose my sanity, i cant sleep because of this i want to handle it so badly.
edit:
oh and i dont think usb debugging and oem unlocking are turned on and i cant check!
EDIT 2: OK so i figured out how to fix the loading firmware failed, on the SD card formatter i had to tick the box , overwrite format! this fixed it, but the main problem still remains, the tablet wont boot and flash from the SD card.
EDIT3:
solved by flashing stock rom using fastboot in linux, or maybe Linux_Upgrade_Tool_v1.2 , i cant remember which of these worked in the end, i just know linux upgrade tool was hell to use, with chinese instructions