[Q] X10 mini pro dead? - Sony Ericsson XPERIA X10 Mini

Hi I have question.
My friend give me x10 min pro because he cant turn him on.
phone isnt totally dead. He vibrates when i turn on be thats all, screen comes brighter a little for 1-2 sec and than goes black again. i can connect phone to pc and SEUS. I already repaired with seus but still facing same problem.. can it be somehow fixed?
also led doesnt turn on.

w3rew0lf said:
Hi I have question.
My friend give me x10 min pro because he cant turn him on.
phone isnt totally dead. He vibrates when i turn on be thats all, screen comes brighter a little for 1-2 sec and than goes black again. i can connect phone to pc and SEUS. I already repaired with seus but still facing same problem.. can it be somehow fixed?
also led doesnt turn on.
Click to expand...
Click to collapse
Hey mate, try this,
NOTE: THIS PROCESS WILL RELOCK UR BOOTLOADER AND ROOT WILL BE GONE
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
:good: all the best

Pras_92 said:
Hey mate, try this,
NOTE: THIS PROCESS WILL RELOCK UR BOOTLOADER AND ROOT WILL BE GONE
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
:good: all the best
Click to expand...
Click to collapse
nope not working but tnx
Same problem as before. Vibrates and looks like it will turn on (screen is little brighter) and it turns of than.

Got the same problem with my e10i using cm7. Try to fix that with flashing sony firmware, but only show the sony ericsson screen and start again, looks like can't boot the rom, but if i use cm7 again it freeze on nAa screen and i can't do anything.
Sry for probably bad english
Sent from my Xperia Go using xda premium

w3rew0lf said:
Hi I have question.
My friend give me x10 min pro because he cant turn him on.
phone isnt totally dead. He vibrates when i turn on be thats all, screen comes brighter a little for 1-2 sec and than goes black again. i can connect phone to pc and SEUS. I already repaired with seus but still facing same problem.. can it be somehow fixed?
also led doesnt turn on.
Click to expand...
Click to collapse
not sure why your led doesn't come on (or does it but blinks maybe) but the symptoms described suggest the most likely cause of the malfunction is the dead lcd. This phone will not turn on completely without the LCD or with a faulty one so your best bet would be to replace the lcd with a known working one and see if that brings your phone back to life.
If seus see your phone which it does, according to your description then your problem is hardware, not software.
---------- Post added at 07:19 PM ---------- Previous post was at 07:12 PM ----------
Aaskereija said:
Got the same problem with my e10i using cm7. Try to fix that with flashing sony firmware, but only show the sony ericsson screen and start again, looks like can't boot the rom, but if i use cm7 again it freeze on nAa screen and i can't do anything.
Sry for probably bad english
Sent from my Xperia Go using xda premium
Click to expand...
Click to collapse
are you sure your phone's hardware is OK and the phone has never been water damaged? Because what you describe looks like power cycle malfunction which is usually caused by faulty hardware, while the software is totally OK.

Related

[Q] [QUERY] HELP !! Help me Restore x10 mini to a usable condition..

Help me ppl ! I screwed up big time !!
I originally got X10 mini with Android 2.1 and relatively old firmware ...anyway I rooted my phone, took the backup and then Flashed a CWM Recovery on it !
Factory WIPED all the data for the new ROM ......
Then I was about to Flash this CM 7.1 ROM when all of a sudden it displayed the message that it wont work wihout the Latest Firmware .... so from there on I had no choice but to Restore my Backup and go back to a working OS, so I could easily proceed with Firmware update ...... but that never happened !!!
The Backup couldnt be recovered ...it failed for i dont know what reason ....ever since then the device never worked beyond the WHITE Sony Ericsson LOGO !!! Im stucked ..... even the CWM Recovery isnt working now !!
I'm stucked !! I've been looking for a solution for almost 3 days now .... but had no luck !!! dont know what to do from here on!! KINDLY HELP !! plzz plzz plzzz !! I desperately need to fix this !! the device even aint mine !!!
restore to stock by using sony ericsson update service
First, don't panic
And you have to notice and make this a lesson; if CWM said that your baseband is incompatible, it means, CWM is not flashing anything to your phone, yet.. So you only have to restart the phone, instead of recovering your CWM backup, and you'll be back to your default OS
Second, now find a tool named FlashTool, and also find a 2.1 stock firmware.. now proceed to flash with USB cable, you'll find the instruction together with the tool
Third, you'll be OK, trust me
first of all moedjs man !! Thx for sympathy n giving me courage !!
but could you kindly confirm that FlashTool would still work even If I'm unable to mount USB anywhere !! coz USB would charge phone but since I'm stuck on Sony Ericsson Logo and cant go beyond that point I'm unable to update my Firmware via PC Companion tool by Sony Ericsson tooo !!!
Thats the main reason I was panicking mate !! Kindly Kindly confirm that for me !! n I'm already liking your positive attitude ..so I do trust ya !! THX again !!
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
dr.norton said:
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
Click to expand...
Click to collapse
Sir I've been through that .... for some reason it didnt work for me beyond "plug the cable while pressing the back key" STEP !! i dont know why !! i didnt have any effect watsoever, therefore I couldnt proceed with the 3rd STEP of Updating it ! =(
and is there anyway to Remove the battery !! coz once I use Home+Power Key combo it restarts device ...... is there any other combo to power off the phone, so I can atleast save battery !! anyway m also givin FLASHTOOL a try !!
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
dr.norton said:
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
Man I just tried turning on my device for the first time today !! Battery was discharged i guessed so Initially I got Red blinking LED light .... now even that its stable on Green .... !! my device isn't turning on !! not even showing that white Sony Ericsson logo now ! i dont know whats happening here !!
I'm trying to be calm but stuff like that keeps happening to me !! Kindly guide me with that !! its still green I hold power button n yet its showing no sign of turning on ! =(((
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
dr.norton said:
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
Click to expand...
Click to collapse
Wow thanks for that Dis-Assembling guide ..... !! I'll ultimately have to try this if everything else fails ....
well I never saw Battery charging on screen !! i think not even when it was working fine !!
I think i'll give it some more time with charging !! coz it just showed me that SE logo again .... but when I tried to restart it .... the screen didnt turn back on !!!
also when SE Logo appears it appears automatically ......dont have to turn on the device ... and then also green LED light turns off ..... Im not sure whether its still charging at that time or not !! I think NOT ! this is kinda dodgy ! what do you reckon ?
no led light, no charge, i think. have you tried triple keys way again? it's kind of tricky, do it carefully.
Yeah I did !! I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
actually from there on it started blinking that RED Led light again .... ! I think its still needs more charging .... but then again If it charges enough to power the screen on automatically ..... the Green LED disappears .... so M kinda stuck in the loop here !
Oh God Help me !!
devilzeye793 said:
I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
Click to expand...
Click to collapse
it sounds not right pal
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
devilzeye793 said:
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
Click to expand...
Click to collapse
yes, but there's power key too. and there's no repeating but holding the back key constantly.
dr.norton said:
yes, but there's power key too. and there's no repeating but holding the back key constantly.
Click to expand...
Click to collapse
I did try this method ....it has no effect ..!! it keeps on waking screen on !! and sony ericsson logo doesnt go away !!
NEITHER is FLASHTOOL working for me !! =(
a. Unplug your USB cable from PC
b. Power off your phone
c. Press back button and keep your finger on button
d. Plug USB cable to PC
e. Check if the green LED appear
f. On popup message press "OK" button
That OK Button never appears for me !! I dont knw wat to do next
Kindly help !!!!
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
dr.norton said:
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
Click to expand...
Click to collapse
When charged enough there's no way to turn the device off ! I've tried both HOME+POWER & HOME+BACK then POWER (holding the back Key towards the end) button none of them actually works ! The Screen keeps powering back on, showing up that Sony Ericsson Logo !
Could it be USB Bricked or something ? (Apparently, since I cant access recovery I cant mount the device)
Try:
- turn off phone
- wait for 1 minute, phone still off
- connect to usb with flashtool
I have almost the same problem, my phone have been breaked several times but every time i had access to xrec or internet to solve problem.But this time when phone dischared for first time n I wanted to start it again I found that it's not gonna boot! Stuck on SE text logo... (I flashed CM7)
now it's charged ( although the screen was on, showing SE) n I have flasher n a rom.
but when i start to flash after showing "start Falshing" on screen (CMD) some seconds pass n CMD shows "write failed" n other things...
When i connect my phone to pc red LED shows itself for some seconds n after it disconnects itself while i'm pressing the back key...
And two questions:
1. Does it matter what the name of the ROM file -in firmware folder- is?...
2. I have to ftf files. on is about 108 MB n the other one 280 MB. Eachone can be a ROM?(I have tested Flasher with both of them.)
tnx

Really bricked phone

Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!

[Q]Can't boot xperia x10 mini pro in flash mode and can't back it to stock ROM

Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol

[Q] Xperia S complete dead! Help revive

Guys, i was upgrading the ROM but this time i used this software, UNIFLASH , it showed some cmd windows, later phone automatically booted to cwm, and then turned off! since then its not turning on neither blinking any LED! guys, please show me a ray , help me! phone is not getting recognized by flashtool either :'( and same with seus
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
realfelix said:
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
Click to expand...
Click to collapse
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
bhuvangaur said:
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
Click to expand...
Click to collapse
have you tried the fastboot method, it´s in android development, "all you need to know..."
try to flash official stock fw like .452 or .45 with flashtool..try to connect the phone in flashmode....hopefully everything will be alright...
PEACE
guys, phone is not able to boot in any mode, it be fastboot or flashmode! its completely dead thats what i meant earlier. After a lot of researching the whole night, i was able to figure out that the bootloader is that the UNIFLASH corrupted the bootloader. So how to fix that?
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
mharckk said:
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
Click to expand...
Click to collapse
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
bhuvangaur said:
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
Click to expand...
Click to collapse
Go to repair center or phone shop! These guys know how to rewrite ur bootloader through JTAG! Don't worry, u'll get it back once it's done!
Sent From my Lt26i, Hit thank whenever u like!
I think you hard bricked your device... Go to service centre ...
Sent from my LT22i using xda premium
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
PS, since the company is no more ericsson based, new service center are SONY one only, where all sony products are welcomed, really good service center now! earlier it was sh*tty since years! i loved the experience this time
bhuvangaur said:
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
Click to expand...
Click to collapse
would you please enplane what is JTAG and how it works ?
Had the same problem yesterday!
Maybe a noob advice but here what was my mistake: after switch off the phone with volume up, wait for like 30 second before trying to connect in flash mode. Though my phone was dead but just had to wait a little bit before trying the flash mode. Flashtool heal it!
Sorry for my poor english, I'm french and this is my first post, but I follow xda since a long time!
Bye!
Napolee said:
would you please enplane what is JTAG and how it works ?
Click to expand...
Click to collapse
It a type of connector that is use to connect directly to the phone mainboard. It use to transfer some specific data such as bootloader!
Sent From my Lt26i, Hit thank whenever u like!
this is hilarious!!! a replacement! brand new xperia s! yay!
Trying to Survive my LT26i
I have rooted my phone
put recovery and flashed my rom to xxperience
so everything was ok
using for 2days
so i saw how to overclocked to 1.8ghz and flash via cwm the kernel
after restart from cwm not either the screen turn on
just green light when i put cable on
and when i tried to flash via flash tool given error for error
so i done as say here to hold power + volume up, and the same
so i waited for a little time and try again and its flashing now...
hope it works

[Q] Xperia Mini St15i continuosly rebooting.

When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
avisingh said:
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
Have you tried to install a custom rom or have you got any idea why this is happening?
Do you know how to flash with flashtool? If not look in my signature there is a rooting guide. In the rooting guide on how to root gingerbread 4.0.2.A.0.62/69 you can see how to flash with flashtool and after that, if you want, root it.
If your phone wasn't rooted and your bootloader is locked and you haven't installed any app which could cause this problem, bring phone to service, but only if this could be hardware related and you haven't modified anything
Oh my science! You've been here since 2009 and this is your first post!?!?
Don't worry Your kernel is clean the problem is with the Rom.
Just flash the stock firmware ftf for your phone using flashtool and it'll be brand new again!
This will be useful
http://forum.xda-developers.com/showthread.php?t=1568792
There are numerous tutorials about flashing ftf through flashtool just google it (the above link will be also useful).
Flashtool can be used with locked bootloader . You can use it on a out of box phone right away.
hit thanks if I've helped!
sent from my smultron
Re: [Q] Xperia Mini St15i continuosly rebooting
avisingh said:
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
I have experienced the same problem with my Xperia mini pro (SK17i). Just try to switch off Bluetooth before it restart. May be it will work on your device too.
Is it possible that bluetooth problem is an issue on android 4.0 ICS?
rmu87 said:
I have experienced the same problem with my Xperia mini pro (SK17i). Just try to switch off Bluetooth before it restart. May be it will work on your device too.
Is it possible that bluetooth problem is an issue on android 4.0 ICS?
Click to expand...
Click to collapse
no. There's no bluetooth bug in ICS.
please help me
avisingh said:
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
I am facing same problem with my sony xperia mini. Have you found any solution??
avisingh said:
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
i have the same problem here with my Xperia Ray.. The phone turned off automatically as i turned the bluetooth on and is not turning on again. it shows the sony and xperia screen over and over again.. now i can't turn it on. my phone is running on official ICS and its not rooted.. i dunno wat to do. please help..
AhoyPopol said:
i have the same problem here with my Xperia Ray.. The phone turned off automatically as i turned the bluetooth on and is not turning on again. it shows the sony and xperia screen over and over again.. now i can't turn it on. my phone is running on official ICS and its not rooted.. i dunno wat to do. please help..
Click to expand...
Click to collapse
Flash stock ftf with flashtool and ur mobile will turn on
Press THANKS if I helped,
Best Regards,
AJ
i am also having this bug on my xperia mini ICS unrooted stock firmware. i got changed by chipset too so now my phone has locked bootloader but still had the f**king bluetooth bug. it never happened in GB.
this also happend to my phone today, and i wipe dalvik cache everytime it reboots. i got this fixed by installing bluetooth fix repair on google play.
Problem in ICS
jeromemo said:
this also happend to my phone today, and i wipe dalvik cache everytime it reboots. i got this fixed by installing bluetooth fix repair on google play.
Click to expand...
Click to collapse
I too faced the same problem in my ST15i....Bluetooth works fine for a few times and after that suddenly it creates bootloop. When for the first time i went to the service center he told me that the ICS release is having a bug and it is not completely compatible.
I have also tried many custom roms with my bootloader locked. But the problem is same.
I feel that the problem is with the stock kernel and stock ICS rom compatibility.
Devs, please look into this and please develop a perfect solution. :good::fingers-crossed:
phone not starting up
i also have this rebooting problem b4 that time i just unlocked my bootloader by test point method the mobile functioned properly
but again the same problem exists this time i tried relocking bootloader by test point method and tried to flash it.Also i tried using s1 tools also after that my mobile is not even switching on 1 vibration is coming and no other further action
I heard that this is the best forum for flashing and rooting android
help me please
xperia mini reboot continusly
i have problem here
with my Xperia st15i
phone turned off automatically
as i turned the bluetooth on
and is not turning on again . it
shows the sony and xperia
screen over and over again and again
now i can't turn it on. my
phone is running on official
ICS and its rooted.i have flash via flashtool with stock fw but same prob facing next day . please help me
Pkumar28 said:
i have problem here
with my Xperia st15i
phone turned off automatically
as i turned the bluetooth on
and is not turning on again . it
shows the sony and xperia
screen over and over again and again
now i can't turn it on. my
phone is running on official
ICS and its rooted.i have flash via flashtool with stock fw but same prob facing next day . please help me
Click to expand...
Click to collapse
i had this problem once on my xperia ray... boots upto xperia logo and reboots... but soon i changed my ROM and kernel and now there is no bug. custom roms are better anf faster than the buggy stock rom from sony...
pitchblack5691 said:
Oh my science! You've been here since 2009 and this is your first post!?!?
Don't worry Your kernel is clean the problem is with the Rom.
Just flash the stock firmware ftf for your phone using flashtool and it'll be brand new again!
This will be useful
http://forum.xda-developers.com/showthread.php?t=1568792
There are numerous tutorials about flashing ftf through flashtool just google it (the above link will be also useful).
Flashtool can be used with locked bootloader . You can use it on a out of box phone right away.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Thanks alot man... my sisters old phone has been sitting there for close to four months cos I traveeled outta the country... and I have never tried doing anything with android software before... so I looked it up yesterday, flashed the phone with gingerbread and then upgradded to ICS for her old st15i... now the phone works like charm and is way lot faster than the old cusom sony xperia rom which was laggy... Thanks again... I feel like a star now... officially welcoming myself to the world of tweaking softwares...
To solve ur issue
avisingh said:
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------Problem Solved---------------------------------------------------------------------------------------------------
I also had Xperia Mini which gave me blue tooth problem.
1) Take out ur phone battery & connect ur phone with charger & switch the phone on.
2) Leave ur phone for about 10 mins and then while restarting put ur battery in the phone.
3)Take out the charger while restarting & ur startup will be more longer.
4) Then quickly go to setting &switch off the blue tooth.
5) Ur phone will restart again but this time ur phone will be working.
NOTE
In this process take out ur Sim Card & SD Card fron ur phone.
Give Reply
Originally Posted by avisingh
When I turn on my Xperia Mini, I first see the sony logo and then I see the xperia logo and then the screen turns off. The phone automatically starts again with the sony logo, xperia logo and so on.
I have tried starting the phone in safe mode by holding down the volume key or by repeatedly pressing the menu button but both of them do not work. I have also tried to "repair" the phone via the PC Companion but it detects the phone only momentarily(as it switches on).
This problem started soon after I had switched on the bluetooth radio on my phone.
My phone is running on Android 4.0.4
This problem did occur in the past but I was able to open the safe mode then and a factory reset solved the problem at that time.No such luck now.
How can I hard reset the phone without reaching the menu??
Or is there any other way to solve this problem??
Please help.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------Problem Solved---------------------------------------------------------------------------------------------------
I also had Xperia Mini which gave me blue tooth problem.
1) Take out ur phone battery & connect ur phone with charger & switch the phone on.
2) Leave ur phone for about 10 mins and then while restarting put ur battery in the phone.
3)Take out the charger while restarting & ur startup will be more longer.
4) Then quickly go to setting &switch off the blue tooth.
5) Ur phone will restart again but this time ur phone will be working.
NOTE
In this process take out ur Sim Card & SD Card fron ur phone.
Give Reply
Click to expand...
Click to collapse
Sent from my One using xda app-developers app
---------- Post added at 03:38 PM ---------- Previous post was at 03:38 PM ----------
pranavashish said:
--------------------------------------------------------------------------------------Problem Solved---------------------------------------------------------------------------------------------------
I also had Xperia Mini which gave me blue tooth problem.
1) Take out ur phone battery & connect ur phone with charger & switch the phone on.
2) Leave ur phone for about 10 mins and then while restarting put ur battery in the phone.
3)Take out the charger while restarting & ur startup will be more longer.
4) Then quickly go to setting &switch off the blue tooth.
5) Ur phone will restart again but this time ur phone will be working.
NOTE
In this process take out ur Sim Card & SD Card fron ur phone.
Give Reply
Click to expand...
Click to collapse
Dude m facing same problem tried above method but didnt worked for me ..i heard flashin stock firmware will do it for me ..where will i find stock firmware and when i connect device ..the device is available for some seconds and it goea off again ..if in this case how can i flash firmware confused plz help me
Sent from my One using xda app-developers app
vaibhav satam said:
Sent from my One using xda app-developers app
---------- Post added at 03:38 PM ---------- Previous post was at 03:38 PM ----------
Dude m facing same problem tried above method but didnt worked for me ..i heard flashin stock firmware will do it for me ..where will i find stock firmware and when i connect device ..the device is available for some seconds and it goea off again ..if in this case how can i flash firmware confused plz help me
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
I'll provide you steps for flashing below
1. download flashtool for your pc and install it
2. you'll find the folder flashtool in c drive them navigate to drivers folder and install the drivers found there during installation select drivers to installed for all device
3.download the latest firmware for ur device and put in firmwares folder of flashtool
4.remove battery from ur mobile and re-insert battery and connect ur phone to ur pc by holding volume down button (ur LED will glow in bright green colour now)
6. now open flashtool.exe It will show device connected in flash mode and click on flash symbol in the flashtool app
7.now select the firmware which u downloaded and click flash
8. that's it after that ur mobile is startup normally but it takes extra time than normal bootup please wait until it starts
Note: Make sure ur battery is charged more than 70% before flashing
please click thanks if it has worked 4 u
anandrd said:
I'll provide you steps for flashing below
1. download flashtool for your pc and install it
2. you'll find the folder flashtool in c drive them navigate to drivers folder and install the drivers found there during installation select drivers to installed for all device
3.download the latest firmware for ur device and put in firmwares folder of flashtool
4.remove battery from ur mobile and re-insert battery and connect ur phone to ur pc by holding volume down button (ur LED will glow in bright green colour now)
6. now open flashtool.exe It will show device connected in flash mode and click on flash symbol in the flashtool app
7.now select the firmware which u downloaded and click flash
8. that's it after that ur mobile is startup normally but it takes extra time than normal bootup please wait until it starts
Note: Make sure ur battery is charged more than 70% before flashing
please click thanks if it has worked 4 u
Click to expand...
Click to collapse
Can u plz share me link for stock firmware ..i flashed some firmwares but i am still in bootloop ..bdw thanks for d quick reply
Sent from my One using xda app-developers app
vaibhav satam said:
Can u plz share me link for stock firmware ..i flashed some firmwares but i am still in bootloop ..bdw thanks for d quick reply
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
xperia mini ICS latest firmware---http://www.4shared.com/rar/29kaVZ1E/Xperia_Mini_ST15i_41B0587.html

Categories

Resources