Hey mates.
The thing is: In my phone all roms running under kernel naa-14 suffer from random shut downs or from loss of signal once in a while, it doesn't happen many times but when it happens it's not good "example: you don't wanna sleep with your alarm not waking you because your phone is turned off, right?" xD.
So i was wondering: do you guys know another kernel for the most recent gb roms instead of kernel naa-14?, or if there is a rom that doesn't suffer from this shut downs/lost signal on this naa-14 kernel?.
Ps: Don't say something like: reinstall rom, go back to 2.1 and then install rom again, etc... i already did all of that.
Thanks
Crazy Seed said:
Hey mates.
The thing is: In my phone all roms running under kernel naa-14 suffer from random shut downs or from loss of signal once in a while, it doesn't happen many times but when it happens it's not good "example: you don't wanna sleep with your alarm not waking you because your phone is turned off, right?" xD.
So i was wondering: do you guys know another kernel for the most recent gb roms instead of kernel naa-14?, or if there is a rom that doesn't suffer from this shut downs/lost signal on this naa-14 kernel?.
Ps: Don't say something like: reinstall rom, go back to 2.1 and then install rom again, etc... i already did all of that.
Thanks
Click to expand...
Click to collapse
hey mate, I have some suggestion for you, firstly you can flash your mini with SEUS(Sony Ericsson Update Service) not with flashtool, so after you flashed with SEUS you will need to start over again for unlock BL and flashing custom ROMS or Kernels, :victory:
madz13 said:
hey mate, I have some suggestion for you, firstly you can flash your mini with SEUS(Sony Ericsson Update Service) not with flashtool, so after you flashed with SEUS you will need to start over again for unlock BL and flashing custom ROMS or Kernels, :victory:
Click to expand...
Click to collapse
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Crazy Seed said:
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Click to expand...
Click to collapse
Hey...you r senior than me...but according to me your problem seems to be kernel problem as every GB rom experiences random shutdowns in your case...maybe u can try redownloading the .ftf file of kernel and then flash it again....all d best mate:good:
Pras_92 said:
Hey...you r senior than me...but according to me your problem seems to be kernel problem as every GB rom experiences random shutdowns in your case...maybe u can try redownloading the .ftf file of kernel and then flash it again....all d best mate:good:
Click to expand...
Click to collapse
Yes it is more likely a kernel problem, and that's why i wanted to know if there is another kernel without this problems. I flashed this naa-kernel 14 on my computer and on my portable computer in different times, but the result is always the same because sooner or later the phone will shut down or loose signal out of nowhere. I thought about flashing a rom with stock kernel but the roms available for stock kernel all have some bugs :S.
Ps: do you think there is much difference between this phone and Sony Live With Walkman in terms of audio quality/loudness and camera?, i am tented to buy that phone and all my problems would be solved for good as i need a stable phone when i get a job xD.
Crazy Seed said:
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Click to expand...
Click to collapse
oh sorry, but via flashtool or SEUS when you flashed your mini's? I had same problem and Flashng via SEUS and start over again from beginning..and yes I dont have any randoms reboot or problems with signal strengh..
Crazy Seed said:
Yes it is more likely a kernel problem, and that's why i wanted to know if there is another kernel without this problems. I flashed this naa-kernel 14 on my computer and on my portable computer in different times, but the result is always the same because sooner or later the phone will shut down or loose signal out of nowhere. I thought about flashing a rom with stock kernel but the roms available for stock kernel all have some bugs :S.
Ps: do you think there is much difference between this phone and Sony Live With Walkman in terms of audio quality/loudness and camera?, i am tented to buy that phone and all my problems would be solved for good as i need a stable phone when i get a job xD.
Click to expand...
Click to collapse
Did u try the rom MiniCM7pro v21 for stock kernel....?? it is much more stable for daily use...n cant say anything about any other kernel bcoz most of GB roms run on nAa14 kernel only...so i think u should try MiniCM7pro v 21 on stock kernel...:good:
Pras_92 said:
Did u try the rom MiniCM7pro v21 for stock kernel....?? it is much more stable for daily use...n cant say anything about any other kernel bcoz most of GB roms run on nAa14 kernel only...so i think u should try MiniCM7pro v 21 on stock kernel...:good:
Click to expand...
Click to collapse
it was the first rom ever that i tried, i don't remember now if it was good or not, but is this rom really more stable to use than the most recent gb roms that run on naa-14 kernel?. And does it have all the fixes "battery, camera quality, etc" that were made till now?.
I made a new thread, asking how i can port recent gb roms to work on Stock kernel, maybe it's better this way if possible.
locked you bootloader 1st.
Crazy Seed said:
it was the first rom ever that i tried, i don't remember now if it was good or not, but is this rom really more stable to use than the most recent gb roms that run on naa-14 kernel?. And does it have all the fixes "battery, camera quality, etc" that were made till now?.
I made a new thread, asking how i can port recent gb roms to work on Stock kernel, maybe it's better this way if possible.
Click to expand...
Click to collapse
Yes i have tried MiniCM7pro v21 and it worked fine for me..battery backup,camera quality,sound everything worked fine....try it....
Related
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
aussiesausage said:
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
Click to expand...
Click to collapse
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
I have stock 2.1 + jit - junk apps, and Very nice, i waiting for a 2.3+ camera
Mr Patchy Patch said:
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
Click to expand...
Click to collapse
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
i use this one.....and never had a problem....
aussiesausage said:
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
Click to expand...
Click to collapse
Did u flash the correct baseband?
Mr Patchy Patch said:
Did u flash the correct baseband?
Click to expand...
Click to collapse
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
aussiesausage said:
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
Click to expand...
Click to collapse
What baseband are you on? .54 or .55?
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=945264
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
Eh - have a read, and if you have issues use the "SEARCH" button.
http://forum.xda-developers.com/showthread.php?t=911364
will give it a try but still got to flash my bb xD
@nadiros trust me I read a lot of threads with roms, and the version confused me, when I saw the link i was like "oh, so that one is the rom"
not asking about the link cause i'm lazy
alankstiyo said:
will give it a try but still got to flash my bb xD
Click to expand...
Click to collapse
What baseband are you on??
Try letting the boot screen loop run for a few minutes. I recently reinstalled wolf's CM2.2 again and it looped a good 6 or so times before actually loading up.
Also make sure that you are on the latest firmware, Wolf's rom requires it
EDIT:: lol I don't know why my post was so late.. guess all the questions were answered.
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
aussiesausage said:
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
Click to expand...
Click to collapse
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Mr Patchy Patch said:
What baseband are you on??
Click to expand...
Click to collapse
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Mr Patchy Patch said:
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Click to expand...
Click to collapse
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
aussiesausage said:
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
Click to expand...
Click to collapse
LOL! ok, well im gonna be up for a while, so if your on the same baseband as me I already have all the files on my computer so I can quickly make you a .zip file with all the proper files to flash.
alankstiyo said:
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Click to expand...
Click to collapse
Ok, im on .54 as well and the ROM works awesome. no need to change your baseband to flash that ROM. Just download the proper files.
Can I flash every ROM to x10i from x10 android dev. ?
And can I flash x10i with newest Official Rom by old tutorial?
Thanks for your answers.
And if you don't want to help me, do not write to this thread.
Yes i use search, but every people can find every thing.
Sometimes somebody need a help.
Yes, you can flash every rom in x10 android development.
What do you mean with "newest rom by old toturial"?
Sent from my X10 using xda premium
Yes
So it is posible ? I dont to brick my phone.
On psp when you flash custom firmware on official 6.XX later you can brick you psp. (its only example)
But therefore I ask.
So I can flash every x10(i) with any rom. And it's not dependent on actual rom. Yes or no ?
Sorry for my english :/
nokimey said:
Yes
So it is posible ? I dont to brick my phone.
On psp when you flash custom firmware on official 6.XX later you can brick you psp. (its only example)
But therefore I ask.
So I can flash every x10(i) with any rom. And it's not dependent on actual rom. Yes or no ?
Sorry for my english :/
Click to expand...
Click to collapse
Some roms depend on bootloader lock/unlock
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone's nice to you! "
Yes, if you make everything according to instructions
what to be published with firmware.
Roms & Rom Availability
nokimey said:
Can I flash every ROM to x10i from x10 android dev. ?
And can I flash x10i with newest Official Rom by old tutorial?
Thanks for your answers.
And if you don't want to help me, do not write to this thread.
Yes i use search, but every people can find every thing.
Sometimes somebody need a help.
Click to expand...
Click to collapse
The X10's flash mode is hard coded in.. so if you set up the flashtool, you can always revert back to a stock original or branded rom. Even if you crash in the middle of rom install, you still have the ability to go back using the flash tool or SEUS repair.
Most roms are a continuing project and in different phases of it.. some are from scratch and some are ports from other phones, all roms have different abilities and perks to running them. CM7 roms give extended system tweaks, and MIUI roms are almost a totally different framework altogether, but they are very smooth.
Kernels are the linux system behind it all, some roms will wipe the original kernel and replace it.. or if you go through the amazing process of unlocking your bootloader, you can have the actual kernel itself replaced.. the perks of this are mostly for overclocking & undervolting to get better performance and/or battery life.
I find no matter which dirrection I go with a rom or kernel, it always seems to have its significant advantages.. If you run into a jam feel free to PM me and I will try and guide you in what ever your venture is, I think I have installed every rom at 1 time or another lol.. best of luck!
even if u brick it can be easily resolved to the normal state...only sometimes it becomes a big pain in a** !! else its cool to go around flashing !!!
skanman said:
The X10's flash mode is hard coded in.. so if you set up the flashtool, you can always revert back to a stock original or branded rom. Even if you crash in the middle of rom install, you still have the ability to go back using the flash tool or SEUS repair.
Most roms are a continuing project and in different phases of it.. some are from scratch and some are ports from other phones, all roms have different abilities and perks to running them. CM7 roms give extended system tweaks, and MIUI roms are almost a totally different framework altogether, but they are very smooth.
Kernels are the linux system behind it all, some roms will wipe the original kernel and replace it.. or if you go through the amazing process of unlocking your bootloader, you can have the actual kernel itself replaced.. the perks of this are mostly for overclocking & undervolting to get better performance and/or battery life.
I find no matter which dirrection I go with a rom or kernel, it always seems to have its significant advantages.. If you run into a jam feel free to PM me and I will try and guide you in what ever your venture is, I think I have installed every rom at 1 time or another lol.. best of luck!
Click to expand...
Click to collapse
Thank you for taking time and explaining roms to us noobs.
Sent from my X10i using xda premium
You can depending on what the u u want to flash.
some roms require the bootloader to be unlocked, and some don't so. Be cautious if not the phone will get. Stuck in a boot loop, in se logo.
Sent from my x10 using XDA App
Make sure that you flash the correct kernel too..
For example: WolfBreak V7B6 + DooMKerneL V06..
MIUI + MIUI kernel....
WolfBreak V7B6.. I felt the difference..LOL
Hi there.i Got sick of those bugs 24/7...I've downloaded like 5-6 roms.Started last year from some froyo rom which was one of the best.Then decided to update and now i am back to stock cuz that 2.3 is rly annoying...Got loop bugs while listening to music and also crashing apps when they've been moved to my sd card.So can u suggest me a stable rom.
I am with stock kernel and i don't want to update to custom.
Sadsleeper said:
I am with stock kernel and i don't want to update to custom.
Click to expand...
Click to collapse
That could be a problem. You´ll need a custom kernal for a good performance.
A custom kernel is especially build for GB and yours is for eclaire and current roms which are verry smooth work just with custom kernal.
That's bad tommorow i will try to unlock it Though i still dunno how to.Those tutorials are so bad(no offence )
Edit:Can someone give me tutorial in which links are actually working ?
Sadsleeper said:
That's bad tommorow i will try to unlock it Though i still dunno how to.Those tutorials are so bad(no offence )
Edit:Can someone give me tutorial in which links are actually working ?
Click to expand...
Click to collapse
the best app to unlock bootoader
http://forum.xda-developers.com/showthread.php?t=1462278
Thanks for the link I've unlocked the bootloader but now it's freezing on kernel's screen I will try to unlock it with flashtool.
you can use this guide to unlock and check your bootloader:
http://forum.xda-developers.com/showthread.php?t=1256969
Ok i've installed sonystule with normal kernel and fro now it's ok Thanks
Hi everyone!
I'm tired using custom roms for their instability and fc's everywhere for over a year I didnt found Rom that works perfect all the time with many apps installed so I just want to my phone work, dont want to flash new system every month again.
I was running stock with deleted apps, Set Cpu (tnx to gregbradley (edit: that was neoxx3m very good advidce, sorry my bad) and z-kernel for about 4 months and I was happy, that was one and only Rom that i've used so long. Yes it wasnt so fast but it was very stable and everything works so nice not even one fc. (kindda wierd couse ive installed z-kerner on my Unlocked BL x10 and now I can't and dont wanna to play and relock)
So i wanna repair my phone and get back to stock, root it, delete all uneeded apps and flash the most stable kernel so will it be failsafe from doom right?
And the question is will my plan work? I know that phone will not be so fast but will everything work and this is all I need or maybe someone has better idea?
Also have some questions about the newest fw for this Doom UB kernel. Where do i get this newest se fw?
Any help will be very appriciated.
Restore the phone back to stock using SEUS. That should do the trick
Sent from my X10i using xda premium
Last few ROMS Ive installed from scratch. So repair, root, etc I've even format sd card everythime i flash new rom. The question is:
Will doomkernel work on stock rom repaired in pc companion?
Will it be stable?
DoomKernel is stable on stock unlocked BL, but u have few version. X, S and one more i think. Look at his thread an try it.
Sent from my "z10i"
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Someone made the topic that He was tring to flash this newest firmware (3.x.x.x) and ended with no boot and anything could help him
I was running stock with deleted apps, Set Cpu (tnx to gregbradley advidce) (...) and I was happy,
Click to expand...
Click to collapse
Of course that was your your advice neoxx3m sorry
netox187 said:
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Click to expand...
Click to collapse
It will work because when u repair ur phone via PCC u get latest firmware (2.3.3/3.x.x.x.x.x), but my advice is to try relock BL and use zKernel, i did that yesterday and i'm happy again!
Sent from my "z10i"
I told you that dont wanna play with bootloader no more, maybe for some time i would like to try some kernel or rom (if im not happy for using stock and doom) and will have to unlock again so im patience (tring to) and will not to this for a while.
Anyway strange is that i flash zKernel even if i had unlocked Bootloader and it work fine but when i tried to do this again ( didnt know that this kernel is fo Locked only) it didnt work
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
deathw15h said:
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
Click to expand...
Click to collapse
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
SmG67 said:
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
Click to expand...
Click to collapse
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
deathw15h said:
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
Click to expand...
Click to collapse
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
SmG67 said:
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
Click to expand...
Click to collapse
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
deathw15h said:
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
Click to expand...
Click to collapse
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
SmG67 said:
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
Click to expand...
Click to collapse
wiped data, partition. flashed gb kernel... still cant enter recovery
deathw15h said:
wiped data, partition. flashed gb kernel... still cant enter recovery
Click to expand...
Click to collapse
repair with seus or pc companion and after that, flash gb-kernel.
SmG67 said:
repair with seus or pc companion and after that, flash gb-kernel.
Click to expand...
Click to collapse
ok sir will check it out. hope it works
deathw15h said:
ok sir will check it out. hope it works
Click to expand...
Click to collapse
Good luck