hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
aussiesausage said:
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
Click to expand...
Click to collapse
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
I have stock 2.1 + jit - junk apps, and Very nice, i waiting for a 2.3+ camera
Mr Patchy Patch said:
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
Click to expand...
Click to collapse
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
i use this one.....and never had a problem....
aussiesausage said:
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
Click to expand...
Click to collapse
Did u flash the correct baseband?
Mr Patchy Patch said:
Did u flash the correct baseband?
Click to expand...
Click to collapse
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
aussiesausage said:
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
Click to expand...
Click to collapse
What baseband are you on? .54 or .55?
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=945264
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
Eh - have a read, and if you have issues use the "SEARCH" button.
http://forum.xda-developers.com/showthread.php?t=911364
will give it a try but still got to flash my bb xD
@nadiros trust me I read a lot of threads with roms, and the version confused me, when I saw the link i was like "oh, so that one is the rom"
not asking about the link cause i'm lazy
alankstiyo said:
will give it a try but still got to flash my bb xD
Click to expand...
Click to collapse
What baseband are you on??
Try letting the boot screen loop run for a few minutes. I recently reinstalled wolf's CM2.2 again and it looped a good 6 or so times before actually loading up.
Also make sure that you are on the latest firmware, Wolf's rom requires it
EDIT:: lol I don't know why my post was so late.. guess all the questions were answered.
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
aussiesausage said:
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
Click to expand...
Click to collapse
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Mr Patchy Patch said:
What baseband are you on??
Click to expand...
Click to collapse
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Mr Patchy Patch said:
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Click to expand...
Click to collapse
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
aussiesausage said:
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
Click to expand...
Click to collapse
LOL! ok, well im gonna be up for a while, so if your on the same baseband as me I already have all the files on my computer so I can quickly make you a .zip file with all the proper files to flash.
alankstiyo said:
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Click to expand...
Click to collapse
Ok, im on .54 as well and the ROM works awesome. no need to change your baseband to flash that ROM. Just download the proper files.
Related
He guys i have try to install adobe flash player on my x10i but with no positive output i tried alot of forums looking and searching on internet i found some instruction i tried the the flash player installed but after i restarted it does not even work please help me if i knew x10 doesn't support flash player i would,nt have bought it but i am stuck with it know for almost 2 years because contract so guys please help me
Thanks
Best regards,
You need to install one of the 2.2 builds for flash
Sent from my X10i using XDA App
Only if you have .435 and baseband .54 (flash is for DualTouch)
Tehouster said:
Only if you have .435 and baseband .54 (flash is for DualTouch)
Click to expand...
Click to collapse
Lol that's not right at all..if you don't really know the answer to a question then don't answer it. Anyhow the other person was right you need a rom that is 2.2 or higher in order to use flash.
You need a froyo (2.2) custom room like this http://forum.xda-developers.com/showthread.php?t=947613
Dude u need a 2.2 ROM, if u have rooted the phone, just install xrecovery and choose install custom rom & location of the rom zip.
Voila you are good to go
Can someone explain to me in layman's (ish) terms, why it's not possible to hack Flash Player support on 2.1?
I want to learn!
Because the framework for flash didn't exist on 2.1.. The only 2.1 that had flash was for htc and it was flash lite, but it sucked..
U just have to flash a 2.2 ROM like Free X10 and download Flash from the Market - Finish
Greetz, Kevin
Flash Palyer is working well on Free X10
thanks guys would you be able to tell me which custom rom is the best I mean best froya 2.2
thanks guys
Best Regards
Sent from my X10i using XDA App
omekhan said:
thanks guys would you be able to tell me which custom rom is the best I mean best froya 2.2
thanks guys
Best Regards
Sent from my X10i using XDA App
Click to expand...
Click to collapse
freex10 beta 4 hands down
Trips miui is my favourite. Check it out
Sent from my X10i TripNMiUI using Tapatalk
fiscidtox said:
Because the framework for flash didn't exist on 2.1.. The only 2.1 that had flash was for htc and it was flash lite, but it sucked..
Click to expand...
Click to collapse
Okay, so thats why there were a lot of rumors about Flash on 2.1
Because HTC had some Flash Lite. But, you could also install it on other phones, or only on some HTC?
Does flash realy need some files from 2.2 ? isnt there a way to copy these files from 2.2 and use under 2.1 ?
Haldi4803 said:
Okay, so thats why there were a lot of rumors about Flash on 2.1
Because HTC had some Flash Lite. But, you could also install it on other phones, or only on some HTC?
Does flash realy need some files from 2.2 ? isnt there a way to copy these files from 2.2 and use under 2.1 ?
Click to expand...
Click to collapse
Only worked on htc phones because it required their sense rom...
There is no way no matter what you do to get it to run on 2.1. It will never happen.
fiscidtox said:
Lol that's not right at all..if you don't really know the answer to a question then don't answer it. Anyhow the other person was right you need a rom that is 2.2 or higher in order to use flash.
Click to expand...
Click to collapse
Well your answer isn't entirely right either
Flash lite works on 2.1 Stock SE, I've tried it. But for the full experience, yeah u need one of the 2.2+ roms
fiscidtox said:
Only worked on htc phones because it required their sense rom...
There is no way no matter what you do to get it to run on 2.1. It will never happen.
Click to expand...
Click to collapse
http://www.addictivetips.com/mobile/how-to-install-flash-10-1-on-android-2-1-eclair-devices/
Wrong that was a total fake rumor... Go to newgrounds.com, it will say it was installed but flash stuff doesn't work. I owned a htc hero for a long time before my x10 and went through when I rooted it and got rid of sense...
fiscidtox said:
Wrong that was a total fake rumor... Go to newgrounds.com, it will say it was installed but flash stuff doesn't work. I owned a htc hero for a long time before my x10 and went through when I rooted it and got rid of sense...
Click to expand...
Click to collapse
Again, there's a difference between flash and flash lite.
Most flash websites do not support flash lite, but there are a few that do. Many ads, for example, are based on flash lite. But anyway, I think the OP has got his answer, so further discussion is futile
pngface said:
Again, there's a difference between flash and flash lite.
Most flash websites do not support flash lite, but there are a few that do. Many ads, for example, are based on flash lite. But anyway, I think the OP has got his answer, so further discussion is futile
Click to expand...
Click to collapse
Yes but newgrounds.com still did work with flash lite as it worked when I had htc sense, then once I rooted and installed a 2.1 custom rom it no longer did, even after I had flash lite supposedly installed.
Ask any of the htc devs and they will tell you the exact same thing guaranteed... It did not actually work...
Seriously go ask pulser, feeyo, any of them..
Hi,
I recently installed OVERDRIVE SERIES gingerbread 2.3.4 a2sd/40 languages/stable and now I want to install its MIUI - Formels MIUI gingerbread 2.3.4. as far as I am aware I should install the MIUI via xrecovery. However the xrecovery 0.3 is not to be installed on ROM 2.2 and 2.3....
How am I supposed to access the recovery menu to install the MIUI??
Any help is much appreciated.
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
aR_ChRiS said:
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
Click to expand...
Click to collapse
Just realized that, thanks.
Installing it now.
aR_ChRiS said:
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
Click to expand...
Click to collapse
why the hell would you do that??
You flash 2.1 first every time?
What a waste of time lol
fiscidtox said:
why the hell would you do that??
You flash 2.1 first every time?
What a waste of time lol
Click to expand...
Click to collapse
yeah I'd like to know that too, I've seen some recommending it but I've never done it & I've never had any problem (knock on wood hehe)
so what's the logic here? I want to know?
riginal said:
yeah I'd like to know that too, I've seen some recommending it but I've never done it & I've never had any problem (knock on wood hehe)
so what's the logic here? I want to know?
Click to expand...
Click to collapse
Probably some ritual... superstition maybe
kozxmartt said:
Probably some ritual... superstition maybe
Click to expand...
Click to collapse
It's retarded as long as you have the right baseband or flash a baseband patch and make sure to wipe everything that step would accomplish nothing...
Hey guys i have been having some signal problems with my ace, but I only have them when inside my house. This started happening when I flashed gingerbread 2.3.5 to get a custom rom for my Ace (which is awesome btw!) the rom I am currently using is WP7 Rom by Jinavs. I have googled & searched a lot and all I found was a code to change the GSM too 900/1800 but I tried the code and it said that it was invalid, the code is *#2263#. Then I read something about changing the phone's modem is this possible on custom firmware? I never had any problems when I was on Stock Froyo 2.2.1. Any help guys?
Also master reset or factory reset does not work :/
what I do sometimes is airplane mode or turn off the phone and it sometimes works
and it only happens inside my house it works fine in any other place.
Any help will be appreciated
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
shailpancholi said:
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I'm from Puerto Rico if that changes anything. Also is this risky? would it brick my phone because the Rom I'm using is based on XWKS2
Also how would I flash the modem only?
And I would like to keep this rom because I love WP7 xD
Anyone? :/
Reflash with stock gb rom for your region
Sent from your phone
an0nym0us_ said:
Reflash with stock gb rom for your region
Sent from your phone
Click to expand...
Click to collapse
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
iAreBeRtii said:
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
Click to expand...
Click to collapse
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
an0nym0us_ said:
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
Click to expand...
Click to collapse
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
iAreBeRtii said:
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
Click to expand...
Click to collapse
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
an0nym0us_ said:
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
Click to expand...
Click to collapse
Ok but the firmware is a 1 package.
Am I going to flash only the modem or the whole rom?
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
an0nym0us_ said:
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
Click to expand...
Click to collapse
Ok so let me get this right.
1. Backup with CWM
2. Flash Rom with ODIN
3. go into CWM and restore backup
4. check modem
am I missing anything?
Sorry if I ask a lot I just don't wanna eff up my phone
yes correct.
an0nym0us_ said:
yes correct.
Click to expand...
Click to collapse
Ok I will do that and get back to you
If it works I'll click thanks on all your posts 'till I run out of thanks for the day
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
Oh ok then imma search the forum for the CWM
already restoring backup
OMG THANKS DUDE you made a guy in puerto rico really happy right now I will try the FW out and will report back well here I go as I promised thanks to your posts
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
iAreBeRtii said:
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
Click to expand...
Click to collapse
clear data/factory reset from cwm. note that u'll lost all data when doing so, but if its not working either even after factory reset then just restore the cwm backup
its worth a try
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
deathw15h said:
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
Click to expand...
Click to collapse
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
SmG67 said:
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
Click to expand...
Click to collapse
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
deathw15h said:
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
Click to expand...
Click to collapse
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
SmG67 said:
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
Click to expand...
Click to collapse
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
deathw15h said:
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
Click to expand...
Click to collapse
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
SmG67 said:
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
Click to expand...
Click to collapse
wiped data, partition. flashed gb kernel... still cant enter recovery
deathw15h said:
wiped data, partition. flashed gb kernel... still cant enter recovery
Click to expand...
Click to collapse
repair with seus or pc companion and after that, flash gb-kernel.
SmG67 said:
repair with seus or pc companion and after that, flash gb-kernel.
Click to expand...
Click to collapse
ok sir will check it out. hope it works
deathw15h said:
ok sir will check it out. hope it works
Click to expand...
Click to collapse
Good luck
Hey mates.
The thing is: In my phone all roms running under kernel naa-14 suffer from random shut downs or from loss of signal once in a while, it doesn't happen many times but when it happens it's not good "example: you don't wanna sleep with your alarm not waking you because your phone is turned off, right?" xD.
So i was wondering: do you guys know another kernel for the most recent gb roms instead of kernel naa-14?, or if there is a rom that doesn't suffer from this shut downs/lost signal on this naa-14 kernel?.
Ps: Don't say something like: reinstall rom, go back to 2.1 and then install rom again, etc... i already did all of that.
Thanks
Crazy Seed said:
Hey mates.
The thing is: In my phone all roms running under kernel naa-14 suffer from random shut downs or from loss of signal once in a while, it doesn't happen many times but when it happens it's not good "example: you don't wanna sleep with your alarm not waking you because your phone is turned off, right?" xD.
So i was wondering: do you guys know another kernel for the most recent gb roms instead of kernel naa-14?, or if there is a rom that doesn't suffer from this shut downs/lost signal on this naa-14 kernel?.
Ps: Don't say something like: reinstall rom, go back to 2.1 and then install rom again, etc... i already did all of that.
Thanks
Click to expand...
Click to collapse
hey mate, I have some suggestion for you, firstly you can flash your mini with SEUS(Sony Ericsson Update Service) not with flashtool, so after you flashed with SEUS you will need to start over again for unlock BL and flashing custom ROMS or Kernels, :victory:
madz13 said:
hey mate, I have some suggestion for you, firstly you can flash your mini with SEUS(Sony Ericsson Update Service) not with flashtool, so after you flashed with SEUS you will need to start over again for unlock BL and flashing custom ROMS or Kernels, :victory:
Click to expand...
Click to collapse
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Crazy Seed said:
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Click to expand...
Click to collapse
Hey...you r senior than me...but according to me your problem seems to be kernel problem as every GB rom experiences random shutdowns in your case...maybe u can try redownloading the .ftf file of kernel and then flash it again....all d best mate:good:
Pras_92 said:
Hey...you r senior than me...but according to me your problem seems to be kernel problem as every GB rom experiences random shutdowns in your case...maybe u can try redownloading the .ftf file of kernel and then flash it again....all d best mate:good:
Click to expand...
Click to collapse
Yes it is more likely a kernel problem, and that's why i wanted to know if there is another kernel without this problems. I flashed this naa-kernel 14 on my computer and on my portable computer in different times, but the result is always the same because sooner or later the phone will shut down or loose signal out of nowhere. I thought about flashing a rom with stock kernel but the roms available for stock kernel all have some bugs :S.
Ps: do you think there is much difference between this phone and Sony Live With Walkman in terms of audio quality/loudness and camera?, i am tented to buy that phone and all my problems would be solved for good as i need a stable phone when i get a job xD.
Crazy Seed said:
Mate...i think you didn't see my "Ps" xD, in my Ps i say: i already did the Go back to Stock 2.1 and reinstall everything after "kernel+rom" many many times, it doesn't work. The roms work great but one day or another it remembers to shut down or loose signal :S xD. I don't know if it is the kernel or the rom that causes this, any suggestion?
Click to expand...
Click to collapse
oh sorry, but via flashtool or SEUS when you flashed your mini's? I had same problem and Flashng via SEUS and start over again from beginning..and yes I dont have any randoms reboot or problems with signal strengh..
Crazy Seed said:
Yes it is more likely a kernel problem, and that's why i wanted to know if there is another kernel without this problems. I flashed this naa-kernel 14 on my computer and on my portable computer in different times, but the result is always the same because sooner or later the phone will shut down or loose signal out of nowhere. I thought about flashing a rom with stock kernel but the roms available for stock kernel all have some bugs :S.
Ps: do you think there is much difference between this phone and Sony Live With Walkman in terms of audio quality/loudness and camera?, i am tented to buy that phone and all my problems would be solved for good as i need a stable phone when i get a job xD.
Click to expand...
Click to collapse
Did u try the rom MiniCM7pro v21 for stock kernel....?? it is much more stable for daily use...n cant say anything about any other kernel bcoz most of GB roms run on nAa14 kernel only...so i think u should try MiniCM7pro v 21 on stock kernel...:good:
Pras_92 said:
Did u try the rom MiniCM7pro v21 for stock kernel....?? it is much more stable for daily use...n cant say anything about any other kernel bcoz most of GB roms run on nAa14 kernel only...so i think u should try MiniCM7pro v 21 on stock kernel...:good:
Click to expand...
Click to collapse
it was the first rom ever that i tried, i don't remember now if it was good or not, but is this rom really more stable to use than the most recent gb roms that run on naa-14 kernel?. And does it have all the fixes "battery, camera quality, etc" that were made till now?.
I made a new thread, asking how i can port recent gb roms to work on Stock kernel, maybe it's better this way if possible.
locked you bootloader 1st.
Crazy Seed said:
it was the first rom ever that i tried, i don't remember now if it was good or not, but is this rom really more stable to use than the most recent gb roms that run on naa-14 kernel?. And does it have all the fixes "battery, camera quality, etc" that were made till now?.
I made a new thread, asking how i can port recent gb roms to work on Stock kernel, maybe it's better this way if possible.
Click to expand...
Click to collapse
Yes i have tried MiniCM7pro v21 and it worked fine for me..battery backup,camera quality,sound everything worked fine....try it....