Hello!
I have installed Cyanogenmod 9 on my LG Optimus Sol E730. In this moment, my phone won’t start. When I press the power button, the display shows „Emergency Mode!”. Before "Emergency Mode" screen appeared (when Cyanogenmod worked fine), I have tried to go into Recovery Mode, but I was getting the blue screen and the phone restarted. In this momment the phone doesn’t allow me to go into Recovery Mode. I have tried to reinstall the original firmware with KDZ Firmware Update, but I get an error and the program closes.
KDZ log -
22:41:32 : Launching SW update
22:41:32 : Unpacking KDZ
22:41:43 : KDZ file extraced
22:41:56 : Files were extracted.
22:41:56 : LGMobileDL Load.
22:41:56 : Port = -1
22:41:56 : Connecting to phone
22:42:06 : Check Phone mode = 1
22:42:23 : Phone type check.......
22:42:28 : LGMobileDL.DLL Loading....
22:42:28 : _SetAuthMark Fail
22:42:28 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:28 : _SetAuthMark Fail
22:42:28 : LoadCDMAPhoneData() Error
22:42:28 : _DetachDLL Call
22:42:28 : _DetachDLL Call End
22:42:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGE730AT-00-V10j-VDF-XXX-JAN-15-2013+0-DZ.dz
22:42:28 : Param : moduleDir =
22:42:28 : Param : waitTime = 0
22:42:28 : Param : UsbHighSpeed = 1
22:42:28 : Param : PhoneMode = 1
22:42:28 : Param : BinVersion = V10J_00
22:42:28 : Param : AuthMark = 0
22:42:28 : Call fn_StartUpgrade
22:42:28 : Smart : wParam = 206, lParam = 0
How can I reinstall the software on this phone?
Can I use ODIN 3 v1.70 or other software?
Please help me with a tutorial or some information.
I mention that I have installed Windows 8 x64 on my pc.
Thank you, guys!
select 3GQTC in type and phone mode to DIAG in kdz flasher and then flash it.
mr.harsh said:
select 3GQTC in type and phone mode to DIAG in kdz flasher and then flash it.
Click to expand...
Click to collapse
Thanks for your reply, mr.harsh!
I have already tried to reinstall the original firmware with KDZ Firmware Update (3GQTC + DIAG, 3GQTC + EMERGENCY, 3GQTC + CS_EMERGENCY), but I get the same error and the program closes.
Related
alright i'v been trying to root LG P500h for a few hours now.i have the 2.2 firmware ( V10G_00.kdz). when i start flashing everything starts going normally, my phones screen even displays the yellow emergancy mode screen. but after about 2 minutes of the updater running it fails and this is my Log screen
[R&D Test Tools Log File]
22:34:09 : Launching SW update
22:34:09 : Unpacking KDZ
22:34:11 : KDZ file extraced
22:34:12 : Files were extracted.
22:34:12 : LGMobileDL Load.
22:34:12 : Port = -1
22:34:12 : Connecting to phone
22:34:22 : Check Phone mode = 1
22:34:41 : Phone type check.......
22:34:41 : LGMobileDL.DLL Loading....
22:34:41 : _SetAuthMark Ok : wAuthMark(14242)
22:34:41 : _DetachDLL Call
22:34:41 : _DetachDLL Call End
22:34:41 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500hAT-00-V10g-TLS-CA-OCT-27-2010+0.dz
22:34:41 : Param : moduleDir =
22:34:41 : Param : waitTime = 1
22:34:41 : Param : UsbHighSpeed = 1
22:34:41 : Param : PhoneMode = 1
22:34:41 : Param : BinVersion = V10G_00
22:34:41 : Param : AuthMark = 14242
22:34:41 : Call fn_StartUpgrade
22:34:49 : 3GQCT : wParam = 4, lParam = 0
22:34:49 : Step Complete : DLOAD Change
22:41:30 : 3GQCT : wParam = 100, lParam = 6
22:41:30 : Step : Upgrade Error error code = 6
22:41:30 : ResetStartInfo() Call
22:41:30 : _DetachDLL Call
22:41:30 : _DetachDLL Call End
22:41:30 : FreeLibrary Call
22:41:30 : FreeLibrary Call End
22:41:30 : ResetStartInfo() Call End
22:41:30 : ===FINISHED===
i have done everything, even unmounting sd card and reamoving it. i just came across some info about LGE modem. would this cause the uptader to fail if not dissabled?
power off your phone, go into emergency mode, connect to PC, run kdz updater with emergency option. if its not working remove your battery, put it back in and try again. and DONOT disconnect your phone untill the proces is finished and your phone restarts or you can brick your phone...
awesome, thanx lukasx. i have success
You don't need to downgrade your firmware to 2.2 for the purpose of rooting. A tool called ginger break can root phones with 2.2.1 or 2.2.2. For information regarding this tool and other info like installing custom recovery etc., read the following thread -
HOWTO] Rooting, Installing -Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
Hi I need some help please D: I Have no recovery, adb won't find device, and fastboot won't boot. I'm using kdz to try and unbrick it, but I get this
[R&D Test Tools Log File]
19:48:40 : Launching SW update
19:48:40 : Unpacking KDZ
19:48:49 : KDZ file extraced
19:48:54 : Files were extracted.
19:48:54 : LGMobileDL Load.
19:48:54 : Port = -1
19:48:54 : Connecting to phone
19:49:05 : Check Phone mode = 2
19:49:05 : Phone type check.......
19:49:11 : LGMobileDL.DLL Loading....
19:49:11 : _SetAuthMark Fail
19:49:12 : _SetAuthMark Ok : wAuthMark(65535)
19:49:12 : _DetachDLL Call
19:49:12 : _DetachDLL Call End
19:49:12 : Param : Path = D:\UserSettings\All Users\Application Data\LGMOBILEAX\Phone\DZ_GT540AT-00-V10c-APP-XX-MAY-12-2010+0.dz
19:49:12 : Param : moduleDir =
19:49:12 : Param : waitTime = 33000
19:49:12 : Param : UsbHighSpeed = 1
19:49:12 : Param : PhoneMode = 2
19:49:12 : Param : BinVersion = V10C_00
19:49:12 : Param : AuthMark = 65535
19:49:12 : Call fn_StartUpgrade
19:49:37 : 3GQCT : wParam = 100, lParam = 2
19:49:37 : Step : Upgrade Error error code = 2
19:49:37 : ResetStartInfo() Call
19:49:37 : _DetachDLL Call
19:49:37 : _DetachDLL Call End
19:49:37 : FreeLibrary Call
19:49:37 : FreeLibrary Call End
19:49:37 : ResetStartInfo() Call End
19:49:38 : ===FINISHED===
I thought I was sooo close to unbricking it Dx now I can't figure it out, I've already spent about 15 hours working on getting this unbricked... please help?
Did u install pc suite?
Mrheroinlol said:
19:49:12 : Param : Path = D:\UserSettings\All Users\Application Data\LGMOBILEAX\Phone\DZ_GT540AT-00-V10c-APP-XX-MAY-12-2010+0.dz
Click to expand...
Click to collapse
I may be wrong but this image seems to be for the GT540. I don't think Optimus V is the same phone as Optimus GT540.
Mrheroinlol said:
Hi I need some help please D: I Have no recovery, adb won't find device, and fastboot won't boot. I'm using kdz to try and unbrick it, but I get this
[R&D Test Tools Log File]
19:48:40 : Launching SW update
19:48:40 : Unpacking KDZ
19:48:49 : KDZ file extraced
19:48:54 : Files were extracted.
19:48:54 : LGMobileDL Load.
19:48:54 : Port = -1
19:48:54 : Connecting to phone
19:49:05 : Check Phone mode = 2
19:49:05 : Phone type check.......
19:49:11 : LGMobileDL.DLL Loading....
19:49:11 : _SetAuthMark Fail
19:49:12 : _SetAuthMark Ok : wAuthMark(65535)
19:49:12 : _DetachDLL Call
19:49:12 : _DetachDLL Call End
19:49:12 : Param : Path = D:\UserSettings\All Users\Application Data\LGMOBILEAX\Phone\DZ_GT540AT-00-V10c-APP-XX-MAY-12-2010+0.dz
19:49:12 : Param : moduleDir =
19:49:12 : Param : waitTime = 33000
19:49:12 : Param : UsbHighSpeed = 1
19:49:12 : Param : PhoneMode = 2
19:49:12 : Param : BinVersion = V10C_00
19:49:12 : Param : AuthMark = 65535
19:49:12 : Call fn_StartUpgrade
19:49:37 : 3GQCT : wParam = 100, lParam = 2
19:49:37 : Step : Upgrade Error error code = 2
19:49:37 : ResetStartInfo() Call
19:49:37 : _DetachDLL Call
19:49:37 : _DetachDLL Call End
19:49:37 : FreeLibrary Call
19:49:37 : FreeLibrary Call End
19:49:37 : ResetStartInfo() Call End
19:49:38 : ===FINISHED===
I thought I was sooo close to unbricking it Dx now I can't figure it out, I've already spent about 15 hours working on getting this unbricked... please help?
Click to expand...
Click to collapse
Since you have flashed an official ROM( I guess!!)and no root , no recovery. If its in still warranty send it to Lg Service center ,If they don't find any unofficial ROM they may service your phone.Or try your luck by installing new USB drivers on a clean-virus free PC and try KDZ again!!!
I called LG, they transferred me to cm, I told them I tried upgrading using LG software, and they send me a new phone thanks for the help though!
Sent from my LG-VM670 using XDA App
Vm*
Sent from my LG-VM670 using XDA App
They sent you a new phone!?!
Yes sir.
Sent from my LG-VM670 using XDA App
I'm having the exact same issue here. My phone apparently bricked and I can't get adb or fastboot to work, so I'm giving KDZ a try. However, I can't find the proper .kdz file for the LG Optimus V VM670. I found a .kdz file in a KDZ instructional page, but the file was for the P500, not the VM670. I found the stock VM670 firmware, but its in .cab format and internally it contains 2 files that are .wdh format. If anyone knows where I can find the proper .kdz file, please let me know. Thanks!!!
Sorry dude it doesn't exist. The one lg gave out doesn't work.
What I did;
Called lg, said I used their software try. Get to update to 2.2 because my phone came with 2.1
Got transferred.
Told vm the same thing, they told me to write down a number on the letter they're sending with my phone. It would be there In three days.
Four days later a box showed up with a phone skeleton, no back no battery.
I put my skeleton bricked phone in the envelope wrote the number on it and sent it away three days ago.
That's been the life of that situation. Hope you get it fixed/a new phone! :3
Sent from my VM670 using XDA App
so should i call them and tell them the same thing? because i rooted my phone. flashed xiona recovery. and tried to flash an update but i didnt have the beta to update. so i booted back into recovery. made a mistake and selected lg factory reset. now everytime i boot the phone, it automatically wipes and reset in recovery. there isnt any way i can stop it. and my phone only boots to the lg logo. i dont know what to do.
Can you get to recovery? Volume down, power, and home. Because then you could easily fix it. If not then yes try to do what I did.
Sent from my LG-VM670 using XDA App
I'm having problems with my LG Optimus T. I plugged it into the computer, and it told me I needed to update. Halfway through the update process, the phone restarts and gets stuck at the lg screen. I started researching then. Apparently the update didn't finish, so I had to flash it again with KDZ updater. I tried, but I got this:
[R&D Test Tools Log File]
12:59:59 : Launching SW update
12:59:59 : Unpacking KDZ
13:00:21 : KDZ file extraced
13:00:48 : Files were extracted.
13:00:48 : LGMobileDL Load.
13:00:48 : Port = -1
13:00:48 : Connecting to phone
13:01:00 : Check Phone mode = 1
13:01:18 : Phone type check.......
13:01:22 : LGMobileDL.DLL Loading....
13:01:22 : _SetAuthMark Fail
13:01:22 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
13:01:22 : _SetAuthMark Fail
13:01:22 : LoadCDMAPhoneData() Error
13:01:22 : _DetachDLL Call
13:01:22 : _DetachDLL Call End
13:01:22 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz
13:01:22 : Param : moduleDir =
13:01:22 : Param : waitTime = 0
13:01:22 : Param : UsbHighSpeed = 1
13:01:22 : Param : PhoneMode = 1
13:01:22 : Param : BinVersion = Europe Open+Fastboot
13:01:22 : Param : AuthMark = 0
13:01:22 : Call fn_StartUpgrade
13:11:57 : Smart : wParam = 3, lParam = 0
13:11:58 : Smart : wParam = 205, lParam = 0
13:11:58 : Smart : wParam = 100, lParam = 4008
13:11:58 : Step : Upgrade Error error code = 4008
13:11:58 : ResetStartInfo() Call
13:11:58 : _DetachDLL Call
13:11:59 : _DetachDLL Call End
13:11:59 : FreeLibrary Call
13:11:59 : FreeLibrary Call End
13:11:59 : ResetStartInfo() Call End
13:12:11 : ===FINISHED===
13:12:18 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
And now my phone won't even turn on! What just happened? How can I solve this, and will I need to buy a new phone??? Please help!
Can you turn your phone into emergency mode or recovery?
droidaem said:
Can you turn your phone into emergency mode or recovery?
Click to expand...
Click to collapse
it wont do anything. screen wont light up. keys wont either. i read somewhere else today of someone having the same problem as mines' and he solved it just by getting a new battery. i cant test this out, as i cant afford a new battery until the 1st, and i need my phone way before then.
xiyellax said:
it wont do anything. screen wont light up. keys wont either. i read somewhere else today of someone having the same problem as mines' and he solved it just by getting a new battery. i cant test this out, as i cant afford a new battery until the 1st, and i need my phone way before then.
Click to expand...
Click to collapse
if you cant boot your phone into recovery or emergency mode, then you probably have a bricked phone. phones usually get bricked when they are interrupted while updating using kdz. i think your only option is to send in your phone to lg
But what can be the reason for this? Maybe "Type" or "PhoneMode" was selected wrong?
I have used KDZ updater so many times and everything was fine.
sweetnsour said:
if you cant boot your phone into recovery or emergency mode, then you probably have a bricked phone. phones usually get bricked when they are interrupted while updating using kdz. i think your only option is to send in your phone to lg
Click to expand...
Click to collapse
I wish i knew where the nearest service center is. the t moile here is no help at all
droidaem said:
But what can be the reason for this? Maybe "Type" or "PhoneMode" was selected wrong?
I have used KDZ updater so many times and everything was fine.
Click to expand...
Click to collapse
I didnt change it from its original settings though. the 3g one and then the Diag mode one. I didnt unplugg it either
xiyellax said:
I wish i knew where the nearest service center is. the t moile here is no help at all
Click to expand...
Click to collapse
Take a look at your warranty coupon..
There should be written the LG service places in your country.
KDZ Updater guide
xiyellax said:
I'm having problems with my LG Optimus T. I plugged it into the computer, and it told me I needed to update. Halfway through the update process, the phone restarts and gets stuck at the lg screen. I started researching then. Apparently the update didn't finish, so I had to flash it again with KDZ updater. I tried, but I got this:
[R&D Test Tools Log File]
12:59:59 : Launching SW update
12:59:59 : Unpacking KDZ
13:00:21 : KDZ file extraced
13:00:48 : Files were extracted.
13:00:48 : LGMobileDL Load.
13:00:48 : Port = -1
13:00:48 : Connecting to phone
13:01:00 : Check Phone mode = 1
13:01:18 : Phone type check.......
13:01:22 : LGMobileDL.DLL Loading....
13:01:22 : _SetAuthMark Fail
13:01:22 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
13:01:22 : _SetAuthMark Fail
13:01:22 : LoadCDMAPhoneData() Error
13:01:22 : _DetachDLL Call
13:01:22 : _DetachDLL Call End
13:01:22 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz
13:01:22 : Param : moduleDir =
13:01:22 : Param : waitTime = 0
13:01:22 : Param : UsbHighSpeed = 1
13:01:22 : Param : PhoneMode = 1
13:01:22 : Param : BinVersion = Europe Open+Fastboot
13:01:22 : Param : AuthMark = 0
13:01:22 : Call fn_StartUpgrade
13:11:57 : Smart : wParam = 3, lParam = 0
13:11:58 : Smart : wParam = 205, lParam = 0
13:11:58 : Smart : wParam = 100, lParam = 4008
13:11:58 : Step : Upgrade Error error code = 4008
13:11:58 : ResetStartInfo() Call
13:11:58 : _DetachDLL Call
13:11:59 : _DetachDLL Call End
13:11:59 : FreeLibrary Call
13:11:59 : FreeLibrary Call End
13:11:59 : ResetStartInfo() Call End
13:12:11 : ===FINISHED===
13:12:18 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
And now my phone won't even turn on! What just happened? How can I solve this, and will I need to buy a new phone??? Please help!
Click to expand...
Click to collapse
I cant help u out in this situation but prefer u that in future if u faced any of this situation dont disconnect ur phone in EMERGENCY MODE, if in case of any error while updating or downgrading then at the same time restart KDZ Updater and flash ur phone with a working rom. (Official available by LG)
Bhawan
Hi guys sorry if this isn't in the right Place...I'm From Xperia x8 forum...
My friend have a Optimus One or P500, he turn off his cell and from there just it turn only in Emergency Mode..Is an Stock 2.2 rom without root,kernels,etc...
I try this but...I really don't know much of this phone...As I said before I have a xperia x8. Please any Idea????
This is the ChangeLog.
[R&D Test Tools Log File]
23:47:25 : Launching SW update
23:47:25 : Unpacking KDZ
23:48:22 : KDZ file extraced
23:49:34 : Files were extracted.
23:49:34 : LGMobileDL Load.
23:49:34 : Port = -1
23:49:34 : Connecting to phone
23:49:44 : Check Phone mode = 1
23:50:02 : Phone type check.......
23:50:06 : LGMobileDL.DLL Loading....
23:50:06 : _SetAuthMark Fail
23:50:06 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
23:50:06 : _SetAuthMark Fail
23:50:06 : LoadCDMAPhoneData() Error
23:50:06 : _DetachDLL Call
23:50:06 : _DetachDLL Call End
23:50:06 : Param : Path = C:\Documents and Settings\All Users\Datos de programa\LGMOBILEAX\Phone\LGP500AT-00-V20g-VDF-RO-JUN-14-2011+0-DZ.dz
23:50:06 : Param : moduleDir =
23:50:06 : Param : waitTime = 0
23:50:06 : Param : UsbHighSpeed = 1
23:50:06 : Param : PhoneMode = 1
23:50:06 : Param : BinVersion = V20G_00
23:50:06 : Param : AuthMark = 0
23:50:06 : Call fn_StartUpgrade
00:06:31 : Smart : wParam = 100, lParam = 502
00:06:31 : Step : Upgrade Error error code = 502
00:06:31 : ResetStartInfo() Call
00:06:31 : _DetachDLL Call
00:06:32 : _DetachDLL Call End
00:06:32 : FreeLibrary Call
00:06:32 : FreeLibrary Call End
00:06:32 : ResetStartInfo() Call End
00:06:40 : ===FINISHED===
00:06:50 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
Sorry My bad English i'm from Argentina
Thanks to all of you and Cheers!!, And sorry again.
Try to install latest drivers, there were other users with the same problem and some solved it that way.
i had the same problem.
Was stuck in Emergency Mode like forever. i tried all and didn't work.
Took my cell to a service and they performed something called JTAG. it was somewhere around 25 EURO's. It worked for 2 weeks after that it got back in the same state.
Waited for payday and bought a new LG P500.
The other way around my gfriend had the same problem but KDZ fixed her phone with latest drivers. (only worked on Windows XP not on Windows 7 64 bits)
P.S. Try the manual Emergency Mode not the one it enters when the phone starts.
And also disable the LGE Virtual Modem from the device manager before using KDZ.
PS- Thread in the wrong section. Should be moved to general section.
wrong section
whats jtag?
Hi,
I had Oxygen on my phone and I was using it since about a month. Today, suddenly I notice that my phone is turned off even though it had a lot of battery remaining. So, I switch it on and it got stuck at the Oxygen logo for a long time. I tried 2-3 times. So, I booted into recovery which had CWM and tried restoring a backup by selecting "factory reset/clear data" option and then selecting the backup. At the end of the backup process, it said - Error: can't read misc(no space left on device)
As I restarted the phone, it went into emergency mode. It was eternally stuck in this Yellow emergency mode whenever I turned it on.
Thus, I tried searching online and came across KDZ and used it to go back to stock rom. I disabled virtual modem and then tried KDZ with V10E. It initially gave some wparam error 4008 the first time I tried and later on, was always giving wparam error 100; lparam error of 1002.
So, I gave up on KDZ and tried using LDMDP. I tried reinstalling the baseband 20G and then I tried reinstalling recovery onto it. While installing recovery, it showed "Partition table error" at least once and finally one time it said download complete. Now when I turn my phone on, it does not directly go into emergency mode but rather only the LG logo comes up and that logo stays forever.
I even tried hard reset(home + vol down + power) but it doesn't help. It just stays in the lg logo screen.
I dunno what to do anymore. Somebody please help! Is my phone permanently bricked?
similar issue ... bricked lgp690
dev344 said:
Hi,
I had Oxygen on my phone and I was using it since about a month. Today, suddenly I notice that my phone is turned off even though it had a lot of battery remaining. So, I switch it on and it got stuck at the Oxygen logo for a long time. I tried 2-3 times. So, I booted into recovery which had CWM and tried restoring a backup by selecting "factory reset/clear data" option and then selecting the backup. At the end of the backup process, it said - Error: can't read misc(no space left on device)
As I restarted the phone, it went into emergency mode. It was eternally stuck in this Yellow emergency mode whenever I turned it on.
Thus, I tried searching online and came across KDZ and used it to go back to stock rom. I disabled virtual modem and then tried KDZ with V10E. It initially gave some wparam error 4008 the first time I tried and later on, was always giving wparam error 100; lparam error of 1002.
So, I gave up on KDZ and tried using LDMDP. I tried reinstalling the baseband 20G and then I tried reinstalling recovery onto it. While installing recovery, it showed "Partition table error" at least once and finally one time it said download complete. Now when I turn my phone on, it does not directly go into emergency mode but rather only the LG logo comes up and that logo stays forever.
I even tried hard reset(home + vol down + power) but it doesn't help. It just stays in the lg logo screen.
I dunno what to do anymore. Somebody please help! Is my phone permanently bricked?
Click to expand...
Click to collapse
I have a similar issue . I too can;t get past the LG logo screen. Ihope someone helps
ok go to emergency mode(volume up+back+power) and use kdz or lgmdp to flash again for both of u
dev344 said:
Hi,
I had Oxygen on my phone and I was using it since about a month. Today, suddenly I notice that my phone is turned off even though it had a lot of battery remaining. So, I switch it on and it got stuck at the Oxygen logo for a long time. I tried 2-3 times. So, I booted into recovery which had CWM and tried restoring a backup by selecting "factory reset/clear data" option and then selecting the backup. At the end of the backup process, it said - Error: can't read misc(no space left on device)
As I restarted the phone, it went into emergency mode. It was eternally stuck in this Yellow emergency mode whenever I turned it on.
Thus, I tried searching online and came across KDZ and used it to go back to stock rom. I disabled virtual modem and then tried KDZ with V10E. It initially gave some wparam error 4008 the first time I tried and later on, was always giving wparam error 100; lparam error of 1002.
So, I gave up on KDZ and tried using LDMDP. I tried reinstalling the baseband 20G and then I tried reinstalling recovery onto it. While installing recovery, it showed "Partition table error" at least once and finally one time it said download complete. Now when I turn my phone on, it does not directly go into emergency mode but rather only the LG logo comes up and that logo stays forever.
I even tried hard reset(home + vol down + power) but it doesn't help. It just stays in the lg logo screen.
I dunno what to do anymore. Somebody please help! Is my phone permanently bricked?
Click to expand...
Click to collapse
Try flashing with KDZ again (to boot into emergency mode, hold Back + Vol Up + Power) and post the error.
Error log
sweetnsour said:
Try flashing with KDZ again (to boot into emergency mode, hold Back + Vol Up + Power) and post the error.
Click to expand...
Click to collapse
This is the output when I used KDZ without the battery inside the phone.
The settings were "Type: 3GQCT" and "Phonemode: Emergency"
It gave wparam error 100, lparam 1002
Code:
[R&D Test Tools Log File]
18:41:58 : Launching SW update
18:41:58 : Unpacking KDZ
18:42:08 : KDZ file extraced
18:42:10 : Files were extracted.
18:42:10 : LGMobileDL Load.
18:42:10 : Port = -1
18:42:10 : Connecting to phone
18:42:20 : Check Phone mode = 1
18:42:38 : Phone type check.......
18:42:42 : LGMobileDL.DLL Loading....
18:42:42 : _SetAuthMark Fail
18:42:42 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
18:42:42 : _SetAuthMark Fail
18:42:42 : LoadCDMAPhoneData() Error
18:42:42 : _DetachDLL Call
18:42:42 : _DetachDLL Call End
18:42:42 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
18:42:42 : Param : moduleDir =
18:42:42 : Param : waitTime = 1
18:42:42 : Param : UsbHighSpeed = 1
18:42:42 : Param : PhoneMode = 1
18:42:42 : Param : BinVersion = V10E_00
18:42:42 : Param : AuthMark = 0
18:42:42 : Call fn_StartUpgrade
18:42:54 : Smart : wParam = 100, lParam = 1002
18:42:54 : Step : Upgrade Error error code = 1002
18:42:54 : ResetStartInfo() Call
18:42:54 : _DetachDLL Call
18:42:54 : _DetachDLL Call End
18:42:54 : FreeLibrary Call
18:42:54 : FreeLibrary Call End
18:42:54 : ResetStartInfo() Call End
18:42:54 : ===FINISHED===
18:43:01 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
When I run KDZ with phonemode changed to DIAG, i get wparam 100, lparam 4008 and here are the last few lines of the log file
Code:
[19:02:38:147] : Sending Pkt Seq : 61446
[19:02:38:147] : Sending Pkt Seq : 61447
[19:02:38:148] : Sending Pkt Seq : 61448
[19:02:38:148] : Sending Pkt Seq : 61449
[19:02:38:149] : Dl_AsyncWrite - ErrNo(45), Addr(0x07BC4A40), NandErrNo(0x16)
[19:02:38:149] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[19:02:38:149] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[19:02:38:149] : Close Port<<
[19:02:38:149] : TYPE_WPARAM_UPGRADE_ERROR
[19:02:38:149] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[19:02:38:214] : Log finished
dev344 said:
This is the output of when I used KDZ without the battery inside the phone in emergency mode. It gave wparam error 100, lparam 1002
Code:
[R&D Test Tools Log File]
18:41:58 : Launching SW update
18:41:58 : Unpacking KDZ
18:42:08 : KDZ file extraced
18:42:10 : Files were extracted.
18:42:10 : LGMobileDL Load.
18:42:10 : Port = -1
18:42:10 : Connecting to phone
18:42:20 : Check Phone mode = 1
18:42:38 : Phone type check.......
18:42:42 : LGMobileDL.DLL Loading....
18:42:42 : _SetAuthMark Fail
18:42:42 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
18:42:42 : _SetAuthMark Fail
18:42:42 : LoadCDMAPhoneData() Error
18:42:42 : _DetachDLL Call
18:42:42 : _DetachDLL Call End
18:42:42 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
18:42:42 : Param : moduleDir =
18:42:42 : Param : waitTime = 1
18:42:42 : Param : UsbHighSpeed = 1
18:42:42 : Param : PhoneMode = 1
18:42:42 : Param : BinVersion = V10E_00
18:42:42 : Param : AuthMark = 0
18:42:42 : Call fn_StartUpgrade
18:42:54 : Smart : wParam = 100, lParam = 1002
18:42:54 : Step : Upgrade Error error code = 1002
18:42:54 : ResetStartInfo() Call
18:42:54 : _DetachDLL Call
18:42:54 : _DetachDLL Call End
18:42:54 : FreeLibrary Call
18:42:54 : FreeLibrary Call End
18:42:54 : ResetStartInfo() Call End
18:42:54 : ===FINISHED===
18:43:01 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
When I run KDZ with phonemode as DIAG, i get wparam 100, lparam 4008 and here are the last few lines of the log file
Code:
[19:02:38:147] : Sending Pkt Seq : 61446
[19:02:38:147] : Sending Pkt Seq : 61447
[19:02:38:148] : Sending Pkt Seq : 61448
[19:02:38:148] : Sending Pkt Seq : 61449
[19:02:38:149] : Dl_AsyncWrite - ErrNo(45), Addr(0x07BC4A40), NandErrNo(0x16)
[19:02:38:149] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[19:02:38:149] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[19:02:38:149] : Close Port<<
[19:02:38:149] : TYPE_WPARAM_UPGRADE_ERROR
[19:02:38:149] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[19:02:38:214] : Log finished
Click to expand...
Click to collapse
What is ur settings for kdz (phone type etc
Sent from my LG-P500 using xda premium
allenwalker1998 said:
What is ur settings for kdz (phone type etc)
Click to expand...
Click to collapse
Edited my previous post to include those settings.
Just wondering, what operating system are you using? If I remember correctly, I've had trouble using KDZ on Windows 7/8. Luckily I had a Windows XP desktop that did the job. Having said that, maybe you want to try KDZ on another computer.
And you do have your phone's drivers installed right?
Sent from my LG-P509
Lolz.. you really messed up big time!!
First mistake.. you should have wiped everything before restoring through CWM .
Second mistake.. after using kdz or lgmdp did you even check if your device was booting and your root wasnt broken??... to flash recovery?
Easy way to recover
If you stil got root.. use this method.. push recovery and then flash a rom.
rr0yy said:
Lolz.. you really messed up big time!!
Click to expand...
Click to collapse
Now my phone does not even turn on :crying::crying:
rr0yy said:
First mistake.. you should have wiped everything before restoring through CWM .
Click to expand...
Click to collapse
I did use "wipe data" option before restoring.
rr0yy said:
Second mistake.. after using kdz or lgmdp did you even check if your device was booting and your root wasnt broken??... to flash recovery?
Click to expand...
Click to collapse
I did try to see if it was booting after using kdz or lgmdp. The tools always gave error and when I started my device, it wasn't booting.
--
congrats
Congrats. now you are a proud owner of a high tech brick with a semi reflective mirror