I'm having the problem that my X10 was slow when using it after a longer period of idle. I installed SystemPanel to check out which app was causing this. There I found out that it wasn't a particular app (although FaceRecognition does pop out sometimes), but the CPU is used for 100%, staying at 245MHz. The time it takes to get to 1000MHz is total arbitrary, and it's usually staggers around between this range instead of staying at 1000MHz.
Is it allright that the CPU speed keeps changing within this range ? And does anyone have an idea whats causing the CPU to stay at 245 MHz for too long after being idle ?
Default battery plan is set to "ondemand", which means the cpu will automatically adjusts itself regarding usage. But it's weird indeed it stays at 245MHz, as on mine it often goes to 998MHz just for few things
You can force/restore it with setcpu (maybe) ?
Altough your phone is lagging, your battery should stand for weeks with this clock
Love the evil fascinate! I am trying to optimize the voltage settings using the Voltage control. I am not sure what to do. I want to optimize battery life mostly. I have it set on base setting for bfq at the moment. Do these need to be tweaked. FYI I have SetCpu set to reduce my clock speed as the battery % drops as follows
Battery < 20% 200 max 100 min
Battery < 40% 400 max 200 min
Battery < 60% 600 max 200 min
Battery < 80% 800 max 200 min
Battery < 99% 1000 max 200 min
I corrected this post title a few times cause I kept putting in wrong information. Sorry
yo i have problem to get 2750mA battery up to 8 hours
i get 60mA - 109mA current usage
even after locking the clock speed to 200mhz with setCpu
what value is normal ?
i tired clearrom ics and gb both have weird jumps from min to max
without something really running there
Proz00 said:
yo i have problem to get 2750mA battery up to 8 hours
i get 60mA - 109mA current usage
even after locking the clock speed to 200mhz with setCpu
what value is normal ?
Click to expand...
Click to collapse
I used to see apps/widgets that tell you the useage/drainage of the battery in mA, but I haven't been able to find one lately
What are you using to determine your usage?
current widget
bump 10char
edit
preflock by HTC make the clock speed got crazy
lets wait for sc from them
My CPU's temp is ~ 49 degree when do nothing, but when i do something it will come to > 53 degree .
I flashed all Custom rom to find one can help my cpu temp is low but .. it still high.
This is hardware problem ?
I'm getting mid-30s when idle. I suggest trying another kernel.
lamx710 said:
My CPU's temp is ~ 49 degree when do nothing, but when i do something it will come to > 53 degree .
I flashed all Custom rom to find one can help my cpu temp is low but .. it still high.
This is hardware problem ?
Click to expand...
Click to collapse
Which ROM and which kernel are you using?
Also, undervolting will reduce temperatures substantially.
Im using CM9 beta-0.4.5.1-cm-9.0.0-RC0-olympus-UNOFFICIAL-signed.zip
Kernel 2.6.32.59-MB860-CM9-gf77ecf8
Jokersax
This kernel may doesnt support Voltages. Open SetCPU i not see Voltages tab.
Can u suggest me some other kernel ?
Try faux123's kernel, and then do some undervolting.
I changed to faux but when change some voltage setting then my phone hang and reboot many times. temp still so high ( i only set -50mhz). Any sugest ?
Try -25 and use profiles for screen off. Don't forget that there's a 100mV delta limit for each step. Are you overclocking your phone?
My current settings with faux123's kernel:
Screen off profile: 216 min - 456 max
Voltages:
1000 MHz - 950 mV
912 MHz - 900 mV
750 MHz - 800 mV
608 MHz - 700 mV
456 MHz - 600 mV
312 MHz - 500 mV
216 MHz - 400 mV
A note about undervolting: not every cpu is the same. You might be able to get an even lower undervolt, or you might not even be able to undervolt at all. Just make sure you uncheck "Set on Boot" until you get a 100% stable undervolt.
Edit: While you're at it, take a look at the "Time in State" info. What frequency does your phone spend most of its time at? If it spends a lot of time on higher frequencies, there's your culprit for high temps.
lamx710 said:
I changed to faux but when change some voltage setting then my phone hang and reboot many times. temp still so high ( i only set -50mhz). Any sugest ?
Click to expand...
Click to collapse
Which Faux kernel did you flash? You should be using the 1.0GHz kernel. If you are using that and have mild UV then you should have no heat (or battery life) issues. Also, you need to check for any apps which are causing your CPU to be continually under load when it should be at idle. This could also account for higher than normal heat.
Your phone should be able to handle -50 Hz at all frequencies, as that is a very low UV.
quetzalcoatl2435 said:
Try -25 and use profiles for screen off. Don't forget that there's a 100mV delta limit for each step. Are you overclocking your phone?
My current settings with faux123's kernel:
Screen off profile: 216 min - 456 max
Voltages:
1000 MHz - 950 mV
912 MHz - 900 mV
750 MHz - 800 mV
608 MHz - 700 mV
456 MHz - 600 mV
312 MHz - 500 mV
216 MHz - 400 mV
A note about undervolting: not every cpu is the same. You might be able to get an even lower undervolt, or you might not even be able to undervolt at all. Just make sure you uncheck "Set on Boot" until you get a 100% stable undervolt.
Edit: While you're at it, take a look at the "Time in State" info. What frequency does your phone spend most of its time at? If it spends a lot of time on higher frequencies, there's your culprit for high temps.
Click to expand...
Click to collapse
Ok i will try and will report soon . Tks
CaelanT said:
Which Faux kernel did you flash? You should be using the 1.0GHz kernel. If you are using that and have mild UV then you should have no heat (or battery life) issues. Also, you need to check for any apps which are causing your CPU to be continually under load when it should be at idle. This could also account for higher than normal heat.
Your phone should be able to handle -50 Hz at all frequencies, as that is a very low UV.
Click to expand...
Click to collapse
I flash Faux 1.0 GHz kernel (my old post) like u said. I will try all you suggest then report soon tks guys
I tried all you suggest but still automatic off (or idle cause i press power button my phone dont start ... it like my phone is hanging ) then I must off my battery to power on my phone.
The average temp around 44 degrees or higher ..
What ROM are you using, and did this problem occur on stock?
I'm using CM9 ICS
Sometime with stock rom, this problem appear. I think it from my phone's hardware. When CPU temp > 50 degree it happen.
Today,
after talk over skype,
view some webpage,
it's seem abit hot (about 45 degree).
After all, i lock screen then put to my trouser. When come to other place I open it, press power and nothing come to screen like its still running so i must off my battery to turn on again.
Flashed many rom from stock to custom but never see one can make me feel happy ). If it from hardware so poor me
Sounds like a hardware issue. Do you happen to use any type of case on your phone?
rieslav canopy
I dont use any case on my phone (sorry my bad english, "case" in your question mean protect item ? ).
I just found, when my phone is hot, it will shutdown.
Today when my battery < 15%. My phone suddenly running smoothly @@. I dont know why.
trying to find a way to help my phone run ok
So, I'm having a bit of trouble with my att right now.
It started while I was on miui ron and fxp kernel and it is still there after moving to dl krnel and donut rom. CPU spy shows that in the last 66 hrs I've been 7 hrs on deep sleep. 54 hrs on 245 mhz, obviously this is why, but how do I fix it.
Battery stats show that it's cell standby that hogs a lot of the battery, at teh least they % is huge compared to the phone is idle part, I remember they used to be about equal before.
I've tried stopping aps, all aps I got running now has been on for 66 hrs, thus they can not stop the deep sleep, there has to be some other reason.
I've installed setcpu and changed min to 128, and set governor to smartass V2, so now it's using 128 instead of 245mhz, but still not touching deep sleep.
Any ideas?
In Donut HD ROM this is the known problem. I have solved it with another users which had same issues.
Try to change your kernel to Doomkernel instead, it should fix it.