[ROM][GT-I9100P][JB][4.3.1] CyanogenMod 10.2 unofficial
Unofficial CyanogenMod CM-10.2 for GT-I9100P - Galaxy S2 with NFC
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Download:
10.2.1-RC2 15/02/2014
See download tab.
Installation:
First time installing CyanogenMod 10.2 to your Galaxy S II, or coming from another ROM:
- Read the official wiki
- Copy GApps and CM10.2 ZIPs to your internal SDCard
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG. If you're unsure, flash this ClockworkMod-Recovery using Odin/Heimdall.
- Make sure you're running a proper working ClockworkMod-Recovery
- Boot into Recovery
- Flash CM10.2 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.2 zip from internal SDCard
- Reboot
Upgrading from CyanogenMod 10.1:
- Copy 4.3 GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
If you comes from a ROM not supporting NFC, reboot an other time in order to have the NFC working.
Sources:
Device: https://github.com/Qaweck/android_device_samsung_i9100p
Patches:
#device/samsung/galaxys2-common
git fetch http://[email protected]/CyanogenMod/android_device_samsung_galaxys2-common refs/changes/00/45800/3 && git cherry-pick FETCH_HEAD
#kernel/samsung/smdk4412
git fetch http://[email protected]/CyanogenMod/android_kernel_samsung_smdk4412 refs/changes/99/45799/2 && git cherry-pick FETCH_HEAD
Build instruction:
Setup you build environment for GT-I9100 (international). This will download all necessary dependencies.
Add Qaweck/android_device_samsung_i9100p to your local manifest + repo sync
Apply above patches
Don't forget to run extract-files.sh to collect the binaries blobs
Credits:
CyanogenMod sources for i9100 & i777
XDA:DevDB Information
[ROM][GT-I9100P][JB][4.3.1] CyanogenMod 10.2 unofficial, a ROM for the Samsung Galaxy S II
Contributors
Qaweck
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 4.3.1
Stable Release Date: 2013-12-06
Created 2013-12-05
Last Updated 2014-02-16
Reserved
Great!
Well done mate! We need our proper roms too :good:
Which bugs have your build? Same as CM10.2 for i9100?
BTW thank you very much!
I'm completly sure the I9100P users will apreciate your work
Viper The Ripper said:
Great!
Well done mate! We need our proper roms too :good:
Which bugs have your build? Same as CM10.2 for i9100?
BTW thank you very much!
I'm completly sure the I9100P users will apreciate your work
Click to expand...
Click to collapse
Yes, fore sure, It comes with all standards bugs.
I'm currently fixing bugs when using profiles to change bluetooth or data state.
https://jira.cyanogenmod.org/browse/CYAN-2732
RC1 already contains the fix for bluetooth.
@Qaweck From the looks of this, the dev on this has ended. Right?
Reason for asking is that I am looking for a custom ROM that reading NFC tags on the I9100P is works.
I tested this ROM and found that it did not read any tags.
Do you know if it is possible to make a ROM like that?
As i am willing to dedicated a machine for just building roms for our I9100P if needed.
Ps: I am not a dev, but do know how to read and are willing to set of some time to make this work. :good:
I'm current testing the 10.2.1 version. I will upload it soon.
The 10.2 branch is freezed now so you should not expect other build after.
To have nfc woks you must use the original battery which has the antenna built in.
Sent from my Nexus 7 using xda app-developers app
Qaweck said:
I'm current testing the 10.2.1 version. I will upload it soon.
The 10.2 branch is freezed now so you should not expect other build after.
To have nfc woks you must use the original battery which has the antenna built in.
Click to expand...
Click to collapse
OK 10.2.1 RC1 uploaded. Go to download tab.
Qaweck said:
OK 10.2.1 RC1 uploaded. Go to download tab.
Click to expand...
Click to collapse
Hey Qaweck, Tnx for this, and will give it a go today... And i am using the original battery..
PS: Still looking for an extended battery with the NFC part like the Korian version of the samsung extended battery pack..
Finally Lunch Break! Flashing time... hehe
---------- Post added at 12:44 PM ---------- Previous post was at 11:48 AM ----------
Just tried out the cm-10.2.1-RC1-i9100p.zip and I did not manage to get it to read any tags..
I do see the NFC option and it is enabled and I also did an extra restart to make sure thing has settled, but again no go with reading tags..
So back to stock for me.. :crying: :crying: :crying:
Do anyone know of a Custom ROM for the I9100P that actually read tags?
Did you try android beam with i9100p an other android device ?
Did you test you tag with an other android device ?
I'm using the tags provided in the phone box and its ok.
Sent from my Nexus 7 using xda app-developers app
Qaweck said:
Did you try android beam with i9100p an other android device ?
Did you test you tag with an other android device ?
I'm using the tags provided in the phone box and its ok.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
HI mate
I did try with the two tags the phone reads with stick ROM and I do not use beam, so did not get around to test that, as i just use it for reading tags..
So i find it a bit strange that it reads the tags with stock but not with Custom roms. And this does prove that the tags are fine...
Reason I want it to read the tags is that I am using a NfcRing to unlock the phone, and i SOOOOOO wish i could have that with a custom rom. :fingers-crossed:
But i just do NOT get this, why it does not read the tags. As you say it does fine for you. HUmmm...
DO you have any tips on how i start troubleshoot this???
First tip: nfc is disabled while the phone is locked.
You can use nfc taginfo to see that the phone can read the tag (unlocked).
Sent from my Nexus 7 using xda app-developers app
Qaweck said:
First tip: nfc is disabled while the phone is locked.
You can use nfc taginfo to see that the phone can read the tag (unlocked).
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Its true about no nfc when it is locked, but that is ONLY before a bit of sweet modding..
Have a look: http://forum.xda-developers.com/showthread.php?t=2478163
Else I will flash it again and give NFC TagInfo a go and see if it can read any tags and let you know.
EDIT: Well Tried NFC Taginfo and it did not read the tag at all with this ROM but NFC Taginfo reads if fine on stock rom.. hum..
Hi. I'm in the same boat as unubtanium and want to give this ROM a try, but I have an initial very stupid question ... where's the "download tab"?
You should use a web browser to access the download section.
Sent from my GT-I9100P using xda app-developers app
Tried various browsers and then realised I was using the XDA 2010 style which doesn't have the banner containing the download link, switched to XDA 2013 Beta and it was instantly available.
Anyway, have downloaded and tested the ROM and I'm getting exactly the same results as unubtanium. Options are available in settings but I get no response from any tags or devices that work fine using the stock ROM
Do you have tried a full wipe ?
Sent from my Nexus 7 using xda app-developers app
Related
CyanogenMod 11.0 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
This is the official Nightly Build of CM11.0 for the AT&T HTC One.
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions
You must unlock your bootloader via htcdev.com (unless ofc you are on the dev edition)
You must have a custom recovery installed
Go to http://get.cm/?device=m7 and download the latest CM11.0 nightly.
Locate 4.4 Gapps via a quick Google search.
Fully wipe your device from Recovery if you are not coming from CM11.0 already.
Reboot into recovery and install.
Changelog
You can find the latest Changelog here
Github
Huge thanks:
intervigil, toastcfh, deck, Codeworkx - Great team to work with for the HTC M7 device family.
XDA:DevDB Information
CyanogenMod 11.0 for AT&T HTC One - m7, a ROM for the AT&T HTC One
Contributors
h8rift, intervigil, codeworkx
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2013-08-10
Last Updated 2014-01-06
..
Great to see 10.2 progressing so fast. Even better to see immediate support for m7att. Awesome times, thank you all who are involved!
The link isn't working, please re up.
2phonejones said:
The link isn't working, please re up.
Click to expand...
Click to collapse
fixed.
Any recommended firmware for this? Thanks for sharing h8rift!
Sent from my ONE CM10.1
@h8rift Do you have any idea what has changed since yesterday, I repo sync'd this morning attempted to build but ran across the error below? I also downloaded your build and will provide logs for any issues I run across.
Host Clang TableGen: libclangFrontend (gen-clang-decl-nodes) <= external/clang/include/clang/Basic/DeclNodes.td
libsepol.check_assertion_helper: neverallow on line 4294 violated by allow ping ping_exec:file { entrypoint };
Error while expanding policy
/home/roger/4.3_CM/system/out/host/linux-x86/bin/checkpolicy: loading policy configuration from /home/roger/4.3_CM/system/out/target/product/m7att/obj/ETC/sepolicy_intermediates/policy.conf
Host Clang TableGen: libclangFrontend (gen-clang-stmt-nodes) <= external/clang/include/clang/Basic/StmtNodes.td
make: *** [/home/roger/4.3_CM/system/out/target/product/m7att/obj/ETC/sepolicy_intermediates/sepolicy] Error 1
Click to expand...
Click to collapse
BUILD LOG: http://justpaste.it/389i
EDIT: For those of you that build your own this was just merged and appears to have fixed my compile errors. http://review.cyanogenmod.org/#/c/46278/
How's bluetooth look on this? I know they changed a lot with 4.3 on bluetooth.
subarudroid said:
Any recommended firmware for this? Thanks for sharing h8rift!
Sent from my ONE CM10.1
Click to expand...
Click to collapse
No recommended firmware. I'm using AT&T's stock firmware still.
this still have the bugs that the international builds have ?
CheesyNutz said:
this still have the bugs that the international builds have ?
Click to expand...
Click to collapse
The OP says that a message fix will be included in a build tomorrow, I don't know if the international has it fixed already
Sent from my HTC One using Tapatalk 4 Beta
killman2659 said:
The OP says that a message fix will be included in a build tomorrow, I don't know if the international has it fixed already
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Crap don't think that was there when I asked lol thanks Killman
Sent from my METAL PHONE not some plastic phone bloated phone
cant wait till the mms issue gets fixed tomorrow, will be flashing when merge is completed
It will feel good getting back on h8s Rom
Sent from my HTC One using xda premium
sakumaxp said:
cant wait till the mms issue gets fixed tomorrow, will be flashing when merge is completed
Click to expand...
Click to collapse
Verified I just installed my own m7att build with all the latest merges and a few cherry-picks and MMS and SMS are working.
Sms is not working for me either. It's just stuck at sending. Will try the update tonight and report back.
Sent from my HTC One using xda app-developers app
New build is up (same link) for 07292013 with SMS working.
Gogogogogogo
Sent from my Nexus 10 using xda app-developers app
So far so good :thumbup:
4.3gapps Google services is a battery hog! Hopefully once this bakes it it will calm down.
Can't live without G-now.
Proximity seems hit or miss with phone.apk.... Minor nuisance.
Happy to provide logcat if needed. Superb work!
Sent from my ONE CM10.1
updating
On CM10.1 I used the built in CM updater under about phone. Can I do this on CM10.2 yet or will we have to wait on official nightlys before I can do that again?
I think you might need to do a full wipe and then flash the ROM and gapps just to be safe
Sent from my One using xda app-developers app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Gapps : Here
build 1: Here
build 2: Here
Latest build: Here
Installation
- First time flashing CM10.2 to your Galaxy S (or coming from another ROM)?
Reboot into Recovery using 3-button-combo
Do a Nandroid backup! (optional but safer)
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM and Gapps
Working
Everything else other than specified below
Not working
Data
Build 4
Modified to use nexus modem
Build 2/3
Everything works except data
20130804
Initial release
Special Thanks
Pawtip Bbelos Derteufel and Bdogg
Necessary
Want to help make 4.3 stable checkout my github
Eager to try this one. The first 4.3 rom for us. Downloading now. Will flash and let u know.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
Eager to try this one. The first 4.3 rom for us. Downloading now. Will flash and let u know.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Make sure you have odin in case its not functional. After many test with bdogg it may be functional we had sdcard issues surely solved and signal issues which may be an existing problem.
Everything went well installing the rom. It feels snappier too. But I found out I lost root. Tried installing supersu too but dint succeed. So had to revert back to carbon.
Want to be back on 4.3 as soon as possible cos it seems good.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
Everything went well installing the rom. It feels snappier too. But I found out I lost root. Tried installing supersu too but dint succeed. So had to revert back to carbon.
Want to be back on 4.3 as soon as possible cos it seems good.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
looks like they just fixed it does signal show up? I wouldnt mind doing a build going to let cm finish up some stuff
omg I cant take it been watching the conjuring its no joke
I could check only Wifi and could make calls. Dint check bluetooth. Couldn't check 3g either as I have to edit the build.prop to get it working on my network and that was not possible as I had no root access.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
I could check only Wifi and could make calls. Dint check bluetooth. Couldn't check 3g either as I have to edit the build.prop to get it working on my network and that was not possible as I had no root access.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Im running the new build its almost done hope it works
takes like 30 mins to upload
How about the bootsplash did it show teamregular?
Uploading now
Updated Op for new build incase im sleep when it uploads
if its no go check here for build 2 http://goo.im/devs/Unjust/Fascinate/CM-10.2/
Yes it did show team regular
Sent from my Nexus 7 using xda app-developers app
swapnilss said:
Yes it did show team regular
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks
udev, have you thought about being an official CM maintainer? lol
but i will be watching this ROM's development. i'm on freaking stock right now (2.3.5) and waiting for a stable build of 4.3.
there's been a ton of hype about 4.3 being nicer and faster than 4.2, which was honestly crap on the fascinate. i ran cm10.1 for quite a while, but the phone never really had enough ram, and almost everything lagged.
skepticmisfit said:
udev, have you thought about being an official CM maintainer? lol
but i will be watching this ROM's development. i'm on freaking stock right now (2.3.5) and waiting for a stable build of 4.3.
there's been a ton of hype about 4.3 being nicer and faster than 4.2, which was honestly crap on the fascinate. i ran cm10.1 for quite a while, but the phone never really had enough ram, and almost everything lagged.
Click to expand...
Click to collapse
You cant get anywhere without devil kernel which gives you more ram with bigmem enabled. I cant be official I only did this because I thought Jt (official maintainer) would soon have the fascinate ready for 4.3. My kernel does have devil in it I changed it a bit from the original creator DerTeufel.
CyanogenMod 10.2 (Android 4.3) preview build:
Working:
Phone --- SMS --- WIFi --- Bluetooth --- Storage
Not Working
Data --- MMS --- Superuser
I will edit the more I dig in and play around. Dont forget to thank U Dev for his hard work in helping getting this out so soon. Oh yeah...and me for my tiny lil contributioins and for bricking my phone several times to help with testing...lol
Flashed the build 2, no root access again. So I flashed the supersu cwm flashable for 4.3 and gained root. But no 3g data yet. All settings which are required for setting up data connection with my service provider has been done but still no connectivity.
Sent from my Nexus 7 (CLEAN ROM 4) using xda app-developers app
swapnilss said:
Flashed the build 2, no root access again. So I flashed the supersu cwm flashable for 4.3 and gained root. But no 3g data yet. All settings which are required for setting up data connection with my service provider has been done but still no connectivity.
Sent from my Nexus 7 (CLEAN ROM 4) using xda app-developers app
Click to expand...
Click to collapse
To let you know my source is good Im waiting on pawtip and others to fix that issue. Its the rom source older devices lost support but I will let you know when I find other things thanks for testing
Uploaded Build 3
Much excite, flashing now on dev (no carrier) device. Any idea if trim is functional?
AaronCompNetSys said:
Much excite, flashing now on dev (no carrier) device. Any idea if trim is functional?
Click to expand...
Click to collapse
nope my phone is broke but pawtip added it just in case it is. Enjoy
New kernel with improved bootlogo in a while
Unjustified Dev said:
New kernel with improved bootlogo in a while
Click to expand...
Click to collapse
dude you've made literally 3 builds in one day, counting this one. you are my hero.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
PreReqs: Unlocked Bootloader
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 2 I605, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=i605
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Change log http://changelog.bbqdroid.org/#/i605/next
Source http://github.com/CyanogenMod
I just got on the 11/8 version lol. Thank you for this. Time to dirty flash.
Edit confirm camera working here
Sent from my SCH-I605 using Tapatalk 2
If I flash this will I be stuck 4.4 or can I go back to my 4.3 driver?
Dvanzutphenkann said:
If I flash this will I be stuck 4.4 or can I go back to my 4.3 driver?
Click to expand...
Click to collapse
Just make a full backup first
sbrissen said:
Just make a full backup first
Click to expand...
Click to collapse
I've got like 4 back ups thanks man. Just don't want to miss out on see what all the buzz is about with touchwiz 4.3 later this month but my heart is in aosp and moving to kit kat now thanks again
Can you please also update the bugs list with
Holding home button doesn't open recents
Proximity sensor not working (or didn't in previous builds)
I switched back to CM10.2 for now but am looking forward to CM11 when some bugs are fixed.
For me I had no data aside from WiFi all the other bugs are tiny and will be fixed but I'm leaving for work soon so I had to restore back up, looking good though guys thanks for the work. :good:
If you don't install the ROM using the latest version of CWM you won't have data. Not sure why it doesn't work through TWRP.
Hope that helps.
Dvanzutphenkann said:
For me I had no data aside from WiFi all the other bugs are tiny and will be fixed but I'm leaving for work soon so I had to restore back up, looking good though guys thanks for the work. :good:
Click to expand...
Click to collapse
Did you flash with Cwm?
Sent from my SCH-I605 using Tapatalk
draco259 said:
Did you flash with Cwm?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
No Sir but I never have so that wasn'ta issue before but what do i know. Thanks for the suggestion
Dvanzutphenkann said:
No Sir but I never have so that wasn'ta issue before but what do i know. Thanks for the suggestion
Click to expand...
Click to collapse
there are definitely issues flashing 4.4 in twrp at the moment
sbrissen said:
there are definitely issues flashing 4.4 in twrp at the moment
Click to expand...
Click to collapse
Off to work here in a few but I'll be switching to cwm touch version on Thursday as I have a long weekend to play with this beauty. Thanks again fellas
---------- Post added at 04:49 PM ---------- Previous post was at 04:27 PM ----------
Installed cwm touch just wish I had the time to play with it
Snapchat video working?
Sent from my SCH-I605 using Tapatalk
Has anyone noticed that there is no lte during a phone call? I've Bern able to talk and surf on tw or any other aosp roms
Sent from my SCH-I605 using xda app-developers app
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
BennyJr said:
Snapchat video working?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Yes but that was snapchat's problem.
poontab said:
Yes but that was snapchat's problem.
Click to expand...
Click to collapse
Oh word? Thanks
Sent from my SCH-I605 using Tapatalk
There seems to be a nasty sound bug when music is playing and you turn your screen off and on and unlock it. Fixed it by disabling lock sounds under sounds menu and changing screen lock to pattern. Not complaining just trying to save some ears because the sound it makes is pretty terrible haha. Great work so far sbrissen if it wasn't for you I probably wouldn't even still have my note 2!
Sent from my SCH-I605 using XDA Premium 4 mobile app
AngryManMLS said:
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
Click to expand...
Click to collapse
Thanks for this! Where can or if even is twp able to flash 4.4 yet? You have a zip installer by any chance if it is updated. I have seen people talk about it but their website does not show the new one (2.6.3.1 I believe?)
AngryManMLS said:
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
Click to expand...
Click to collapse
Awesome now I don't have to search for this! Was gonna thank you but used my last 2 for the day for your 4.3 TW port then sbrissen when I came across this. Been watching for this just sucks don't have time to flash it tonight. Sbrissen you are a god among men! Great work can't wait to try this!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12
Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse
reserved
iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.
Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.
Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app
This is awesome! Keep up the good work!
I'll probably put screenshots here too.
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4
aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3
Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse
annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!
Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
DOWNLOADS:
Click to expand...
Click to collapse
ROM: Link
Quick patches: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Created 2016-06-25
Last Updated 2016-07-14
Yehey! Hahaha.
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Updale the title bro. Put the Model Number.
AtomR said:
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Click to expand...
Click to collapse
See screenies for more
Only One Bug That would be great
doesntexits said:
See screenies for more
Click to expand...
Click to collapse
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
AtomR said:
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
Click to expand...
Click to collapse
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Dreamstar said:
Only One Bug That would be great
Click to expand...
Click to collapse
Yeah, that sh!tty bug
doesntexits said:
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Click to expand...
Click to collapse
Ahh. Ok. Well, I can surely live without changing fonts.
Title has been changed. And you also put G360HU @doesntexits.
JustFrame said:
Title has been changed. And you also put G360HU @doesntexits.
Click to expand...
Click to collapse
Also removed quotes in my signature too due to characters exceeds limits
if i in stock rom with rooted
and my kernal not updated to latest
can i flash this ??
and which recovery ?
thnks in advance
---------- Post added at 05:38 PM ---------- Previous post was at 05:31 PM ----------
please reply...am waiting for your reply
i hve CWM recovery
Thanks a lot. @doesntexits @Dreamstar
@AtomR
You promised me not ditching this phone right? So just keep up with it. There will be more fun with this phone
And I've made surprises to people by releasing 2 ROMs in a day, with upgraded version of Android
Sent from my SM-G360H using XDA Labs
For Gaps what should I choose? ARM, ARM64 etc??
wowwwwww suprb work dude......so nice so smooth thnks bro
I found another bug: Video recording doesn't work
Probably codecs thingy here
Sent from my SM-G360H using XDA Labs
Boy, i love you! Thank you!
choose ARM instead of ARM64