[ROM][4.4.4][YP-G70][UNOFFICIAL]CyanogenMod 11.0 - Samsung Galaxy Player 4.0, 5.0

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12

---

Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse

---

reserved

---

iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.

---

Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.

---

Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857

---

Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4

---

can't edit build.prop for some reason. other than that so far so good. will post more as i run into it

---

I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app

---

dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)

---

iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app

---

This is awesome! Keep up the good work!
I'll probably put screenshots here too.

---

Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.

---

Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4

---

aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.

---

zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4

---

iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3

---

Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse

---

annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!

---

Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me