CyanogenMod 11.0 for the HTC DNA is still in it's alpha stage. You can see the bugs at the bottom of the second post.
Compiled from CyanogenMod 11 Nightlies source and will update them as they come out.
Flash at your own risk!
How To Install:
Switching to CyanogenMod 11.0 from another ROM:
- Make sure you're running a proper working CWM Recovery.
- Download Gapps and the CM 11.0 zip on to your phone.
- Boot into recovery
- Wipe data/factory reset.
- Flash the CM 11.0 zip from your SD card.
- Flash the Gapps zip from your SD card.
- [ROOT] Flash SuperSU 1.69 or above.
- Reboot to system.
- Don't report bugs related to ART or not wiping cache or using old data from titanium backup!
Upgrading from an earlier version of CyanogenMod 11.0:
- Download the updated CM 11.0 zip on to your phone at least 6.0.4.4 or above.
- Boot into recovery
- Flash the update from your SD card.
- Flash Gapps zip from your SD card.
- Flash SuperSU 1.69 or above.
- Reboot to system.
Downloads
Builds
- CM-11 [11/24/2013] Download
GSM Patch
- GSM Patch DLX v2.3 Download
Gapps
- Gapps 4.4 KitKat Download
SuperSU
- SuperSU XDA Link - Please download the installable zip and flash it per instructions.
Recovery
- CWM 4.0.4.5 Download
Credits
+ CM Team [CM Source]
+ Flyhalf205 [Recovery]
If you are not mentioned and helped in some way please let me know thanks.
Sources
- CM Source
- Kernel Source
Please hit thanks and rate this thread 5 stars if this has helped you!
What works in this version?
- Bluetooth
- Calling
- Camera
- Data
- GPS
- Messaging
- Multimedia Messaging
- WiFi
What don't work?
- ???
Version Information
[Lastest Update] 11/23/2013
[Lastest Build] 11/24/2013
Changelog
11/23/2013
- dlx: external storage (usb-otg) ala 4.4
11/21/2013
- Set CDMA SUBSCRIPTION SOURCE to RUIM in Database for this device
11/19/2013
- kernel: remove extra debugging specified on the command line
- Enable NFC host-based card emulation
- dlx: enable LTE mobile network settings
All changes are not listed here but you can find them here with the lable cm-11.0 to the right.
glad to see more devs come to our device!
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Can we just clear cache and flash this if we are already running the other CyanogenMod 11 from the other thread? The one that is NOT nightly? Or will we have to wipe then flash?
gypsy6slayer said:
Can we just clear cache and flash this if we are already running the other CyanogenMod 11 from the other thread? The one that is NOT nightly? Or will we have to wipe then flash?
Click to expand...
Click to collapse
Yes you should be able to flash the ROM then flash Gapps and flash SuperSU and get away with just wiping the cache.
maxjivi05 said:
Yes you should be able to flash the ROM then flash Gapps and flash SuperSU and get away with just wiping the cache.
Click to expand...
Click to collapse
Alright cool I'll give it a try, but will I have to flash Gapps if I've already got 4.4 Gapps? Cause I am running CyanogenMod 11 with Android 4.4, I just don't have this nightly updated version.
gypsy6slayer said:
Alright cool I'll give it a try, but will I have to flash Gapps if I've already got 4.4 Gapps? Cause I am running CyanogenMod 11 with Android 4.4, I just don't have this nightly updated version.
Click to expand...
Click to collapse
Yes, anytime you replace system applications you will want to flash Gapps and if you want root you'll want to flash SuperSU after you flash Gapps. So just flash the ROM, then flash Gapps, then flash SuperSU all back to back, wipe cache then reboot and enjoy!
maxjivi05 said:
Yes, anytime you replace system applications you will want to flash Gapps and if you want root you'll want to flash SuperSU after you flash Gapps. So just flash the ROM, then flash Gapps, then flash SuperSU all back to back, wipe cache then reboot and enjoy!
Click to expand...
Click to collapse
What's the difference between this build and amit_sen's? Seems like you two should work together, not compete with the same unofficial build?!
Sent from my HTC6435LVW using XDA Premium 4 mobile app
As of this build it has the updates to the source from 11/23/2013 which is just one file change for something to do with OTG. Basically I want to keep updated asap and took on this task as a learning curve and eventually may release a ROM with extra features beyond CM 11 but right now its directly from the source.
Sent from my HTC6435LVW using Tapatalk
maxjivi05 said:
As of this build it has the updates to the source from 11/23/2013 which is just one file change for something to do with OTG. Basically I want to keep updated asap and took on this task as a learning curve and eventually may release a ROM with extra features beyond CM 11 but right now its directly from the source.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
I would advise you to use my thread and post your builds over there rather than creating a entirely new thread. You can lock this thread.
Iam not posting new builds everyday as nothing major is being added. Next build should be out when h/w key mapping is added.
In the meanwhile iam bringing 2 new KK roms
@amit_sen - dude I haz only 1 Dna
Will do, didn't want to intrude but will post new updates to your thread.
Sent from my HTC6435LVW using Tapatalk
No camera in this buil
mods please lock this thread will post futures updates to amit_sen's thread.
can confirm camera isn't working. When I try to load the camera it stays on a blackscreen, the buttons work but do nothing there is no image and when the phone is rotated to landscape mode I get a force close.
keithwired said:
can confirm camera isn't working. When I try to load the camera it stays on a blackscreen, the buttons work but do nothing there is no image and when the phone is rotated to landscape mode I get a force close.
Click to expand...
Click to collapse
Camera issue has been fixed, it was a driver issue which is being uploaded and will be posted in other CM-11's Thread here.
maxjivi05 said:
Camera issue has been fixed, it was a driver issue which is being uploaded and will be posted in other CM-11's Thread here.
Click to expand...
Click to collapse
Can you let us know when its ready please
Its ready now
Sent from my HTC6435LVW using Tapatalk
please delete repeated files, thanks
alejobog said:
please delete repeated files, thanks
Click to expand...
Click to collapse
If u remember correctly there not repeated but it's supposed to be c like that
Sent from my dlx using Tapatalk
Related
Right guys this is the Q&A Thread for the INTERNATIONAL X+ (enrc2b) ask questions and so on report bugs to me, NO OFF TOPIC i will update the 2nd post with bugs and so on.
Ask questions if you are unsure about something
Don't go off topic
I have only made this thread as a convenience, as i know you lot like to talk to us, but i will lock it if it goes super OT
STATE if you are on 10.1 or 10.2
REPORT BUGS IN THE DEVDB AND NOT HERE
First time installing CyanogenMod 10.1/10.2 to your ONE X+, or coming from another ROM:
- Read known issues ans FAQs
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM10.1/10.2 ZIPs to your SDCard
- Boot into HBOOT (hold Volume Down at boot)
- Flash the boot.img
- Fastboot flash boot boot.img
- Reboot into recovery via the bootloader menu
- Flash CM10.1/10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1/10.2:
- Copy CM10.1/10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.1/CM10.2 zip from SDCard
- Reboot
Code:
CM10.1 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Code:
CM10.2 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Focal is buggy when video recording so use the standard camera app to video record
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
el-Loko said:
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
Click to expand...
Click to collapse
there's a BUG REPORTER on the DEVDB
use the new theme
Lloir said:
there's a BUG REPORTER on the DEVDB
use the new theme
Click to expand...
Click to collapse
ahhh, okay, done!
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
With todays nightly my phone doesnt boot, so I roll back to personal build
Notechis said:
With todays nightly my phone doesnt boot, so I roll back to personal build
Click to expand...
Click to collapse
you are joking....it built nicely less than 6hours ago UGH i'll take a look now
koekiemonster said:
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
Click to expand...
Click to collapse
nope literally tuning the ramdisk's cpu freq's that is all i did
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
XiaoBBB said:
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
Click to expand...
Click to collapse
ALL DEVICES are affected today, so no one is getting an official nightly
Lloir said:
ALL DEVICES are affected today, so no one is getting an official nightly
Click to expand...
Click to collapse
darn, i want that audio fix
koekiemonster said:
darn, i want that audio fix
Click to expand...
Click to collapse
it's in the personal build the one you are seeding
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Aust S5 said:
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Click to expand...
Click to collapse
LOL wut, it's impossible for TODAYS nightly to boot.
Lloir said:
LOL wut, it's impossible for TODAYS nightly to boot.
Click to expand...
Click to collapse
Thought the nightly was only missing files like vendor and such so when dirty flashing it might still boot?
Sent from my HTC One X+ using xda premium
Lloir said:
it's in the personal build the one you are seeding
Click to expand...
Click to collapse
i think it is working now (in 10.1.3 RC2). I did a (somewhat dirty) fix to get rid of the audio stutter:
echo 760000 > /sys/module/cpu_tegra/parameters/suspend_cap_freq
echo 2000 > /sys/module/cpu_tegra/parameters/suspend_delay
echo 204000 > /sys/module/snd_soc_tlv320aic3008/parameters/audio_min_freq
(I'm using mortplayer for music, with the equalizer in the mortplayer app)
This probably isn't very good for battery life, but playing music is more important
just fixed the torch on 10.2 also cleaning up the rom itself. dialer is back on the home screen again, correct battery stats are setup and some other annoying things, once i have sorted out a few niggles, i'll upload the personal build again. Trying to get as much as i can get sorted before next week. As i won't be around and it will only be tom for a week or two
Version 2013-09-05 dirty flash only data, dalvik and cache.
Sent from my HTC One X+ using Tapatalk 4
I9100 Builds: http://dl.omnirom.org/i9100/
ChangeLog: https://changelog.omnirom.org/#/i9100/next
Wiki: http://docs.omnirom.org/Main_Page
Gerrit: https://gerrit.omnirom.org/
Butracker: http://jira.omnirom.org
G+ community
==============================
Be Advised:
- Root access is not included by default as of yet. Flash SuperSU for root (also see "SURVIVAL" note).
- Feel free to leave bug reports on the bugtracker.
- This firmware will install TWRP as your device recovery (required to recieve OTA updates).
-GApps >PA 0 Day< mini only (see GApps note)
ART works, but Xposed breaks it.
Recovery requirement
(prior to flashing this firmware):
================
CWM 6.0.4.4+
(flash the latest cm nightly)
--OR--
TWRP 2.6.3.0+
(flash Omni's Boot.IMG via MobileOdin)
NOTES:
GApps: The size of full (system installed) Gapps packages prevent the use or ART runtime. Mini Gapps + google play installation of desired addons is a more efficient approach considering the resources available.
Click to expand...
Click to collapse
SURVIVAL: Go to super SU settings and install backup script. Root will survive updates. As for gapps both banks and PA have backup scripts. You don't need to re-flash them.
in system/addon.d, you should have a 99-supersu.sh, and 70-gapps.sh backup scripts, which survive the Rom update.
The script backs up beforehand and will restore after the flash.
From the backup script..
#!/sbin/sh
#
# /system/addon.d/99-supersu.sh (root:root 755)
# During an upgrade, this script backs up SuperSU-related files,
# /system is formatted and reinstalled, then the files are restored.
#
(info collected from this G+ conversation)
Click to expand...
Click to collapse
How to install CWM from TWRP?
3men2 said:
Boot into TWRP recovery
choose Install
Go to emmc to acces the internal sdcard and go to where you have the kernel with cwm( Siya, AJK, STI)
Flash the Kernel, when finished DON'T TOUCH REBOOT SYSTEM, Just go back to previous screen and choose the reboot to recovery option.
You will boot into CWM now and will be able to wipe everything without issues...
Click to expand...
Click to collapse
MobileOdin Install:
With your phone on fully booted into (whatever ROM)
1) Gather all necessary flash files onto internal sdcard before performing these steps.
---a) Boot.IMG (extracted from omni-4.4.x-latesti9100-nightly.zip)
---b) MrCook's ROM wipe.zip
---c) Omni-nightly.zip
---d) PA GApps (optional)
---e) SuperSU (optional)
2)Mobile-odin flash Omni's boot.img
>>the phone will try to reboot, but will likely fail. Three-finger salute (with the USB cable UNPLUGGED), until you are in TWRP recovery<<
3) [install] > [COOK'S ROM WIPE.zip] > [add more zips] > [omni-4.4.x-latesti9100-nightly.zip] > [add more zips as desired] >>swipe to confirm flash>> [reboot system]
Click to expand...
Click to collapse
flashed the nightly earlier today. quite smooth. but heavy battery drain...
netcitizen said:
flashed the nightly earlier today. quite smooth. but heavy battery drain...
Click to expand...
Click to collapse
If you don't leave your phone to settle down how you can judge battery life?
Gapps?
HI,
Which Gapps do we install on this ROM?
Regards.
your choice, both are ART compatible:
BaNkS (standard)
PA 0 Day
...or any other 4.4 Gapps package.
vijaysivakula said:
HI,
Which Gapps do we install on this ROM?
Regards.
Click to expand...
Click to collapse
HI all !!
I'd like to flash this ROM for my father galaxy s2. I've this rom for my note 2 and i'ts great for my phone !!
What about battery drain ? There are any problems on this rom ? There is multiwindows ?
Thanks for all =)
icant say how battery drain is but after flash discharge it and then charge it till 100% and recalibrate battery with some app or delete it with recovery or some other way
Sent from my GT-I9100 using Tapatalk
I have tried to install core gapps (banks) and google now doesn't work on home screen
Sent from my GT-I9100 using Tapatalk
BaNkS core doesn't include GEL. You'll need to flash BaNkS standard for that experience.
Kimy Hardy said:
I have tried to install core gapps (banks) and google now doesn't work on home screen
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Banks standard or pa mini package, which one works bettah?
Sent from my GT-I9100 using Tapatalk
Kimy Hardy said:
Banks standard or pa mini package, which one works bettah?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Try to use something around 120MB liek pa gapps modular mini or else system partition will run out of space causing several problems.
Spyr0s said:
Try to use something around 120MB liek pa gapps modular mini or else system partition will run out of space causing several problems.
Click to expand...
Click to collapse
so is Banks standard (71.5 MB) better?
Kimy Hardy said:
so Banks standard (71.5 MB) is better?
Click to expand...
Click to collapse
It's for Nexus 5, it will remove the camera and replace it with Nexus one so i don't think it's suitable for this rom.
Spyr0s said:
It's for Nexus 5, it will remove the camera and replace it with Nexus one so i don't think it's suitable for this rom.
Click to expand...
Click to collapse
Okay understood, Thank you both
Just flashed it with Banks STD.
ART works perfectly.
ong14 said:
Just flashed it with Banks STD.
ART works perfectly.
Click to expand...
Click to collapse
Does your camera work?, i was thinking it was for Google Nexus
Sent from my GT-I9100 using Tapatalk
Kimy Hardy said:
Does your camera work?, i was thinking it was for Google Nexus
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Works like a charm.
(50% of original size)
It does replace the camera with the photosphere camera, and works well with OmniROM on i9100 and i777.
Spyr0s said:
It's for Nexus 5, it will remove the camera and replace it with Nexus one so i don't think it's suitable for this rom.
Click to expand...
Click to collapse
ong14 said:
Works like a charm.
(50% of original size)
Click to expand...
Click to collapse
...and video recording?
i just flashed
omni-4.4.1-20131206-i9100-NIGHTLY
12-6_GApps_Standard_4.4.1_signed
and super su.....
now my phone starts but it has a lock screen.... but when unlocked it shows nothing...... drop down works.....but otherwise nothing....
i tried cleaning cache / preload / dalvik
but still same.... .what did i do wrong???
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12
Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse
reserved
iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.
Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.
Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app
This is awesome! Keep up the good work!
I'll probably put screenshots here too.
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4
aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3
Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse
annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!
Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me
Introduction
I'm not really into writing long elaborate OP posts, so here it goes. This is an AOSP compiled, flashable ROM. This ROM is fast and smooth, it is not bloated with useless features. Lustrous ROM has features being added that make it even more useful. You need the 4.04 bootloader! I put a lot of work and love into this rom, if you like it show me some support by donating!
Downloads
ROM Download: Click here!
SuperSU: I'm using 2.40 found Here
First Time Install
Put the file onto your Internal Storage/USB-otg
Reboot into Recovery (CWM/TWRP)
"wipe data/factory reset"
"install zip" -> "install zip from sdcard" -> choose the .zip and confirm (Optional: Add the other zip to flash... TWRP Only I believe)
"Clear cache/bla bla bla"
Flash Gapps
"Clear cache/bla bla bla"
Reboot
first boot may take up to 10 minutes
Features
RRO built in (for Layers)
Super smooth
OTA Updates
Build.prop edits for stability and speed
Super close to stock AOSP
stock kernel
BUGS
I am not sure of any bugs, haven't come across any. If you find some let me know and I'll get it fixed right away!
Credits
Thanks to @sykopompos for being my mentor and helping me out with a lot of things
Thanks to @scrosler for some tidbits and ideas
Thanks to @Chainfire for root
Thanks to the Simple AOSP team for the new gapps
Disclaimer: I am not responsible for anything that may happen to your device, yourself or your family. Flash at your own risk!
XDA:DevDB Information
[ROM] [5.1.1_r1] [Deb]Lustrous Lollipop for Nexus 7 (2013) LTE, ROM for the Nexus 7 (2013)
Contributors
skiman10
ROM OS Version: 5.1.x Lollipop
Based On: AOSP
Version Information
Status: Beta
Created 2014-11-08
Last Updated 2015-06-02
Reserved
Reserved
Thanks for posting. Will update you after I install the ROM
Sent from my Nexus 7 2013 LTE using XDA Premium 4 mobile app
Sweet thanks. Downloading, going to give it a spin.
And yep, that SuperSU is the latest.
Thx @skiman10 will Test it in the evening.
@skiman10 Is this an updated permissive boot image?
great many thanks for your work! Finally lollipop has come to DEB!
Thanks for this ROM. Finally can use android 5.0 on my deb nexus 7.. Successfully flashed this and so far so good. No problem or force close yet. Haven't tried with sim. Everything's run smoother now.
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
mkretzer said:
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
Click to expand...
Click to collapse
Flash the FLO bootloader. It's OK.
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Google+ still missing for me here
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
jayfallen said:
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Click to expand...
Click to collapse
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Ambious said:
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Click to expand...
Click to collapse
root does not work
on this core
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Also can't install Google+ neither from Market nor APK.
Fixed by flashing newer gapps package found here.
hhairplane said:
@skiman10 Is this an updated permissive boot image?
Click to expand...
Click to collapse
I might have to update the boot.img more, I'm pretty sure it is in permissive mode right now. I'll check that out right now.
BladeRider said:
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hmmm you shouldn't have lost your recovery.... I should have turned that off. Let me look. Also you still rock a Galaxy Nexus? Respect.
florynn2003 said:
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Click to expand...
Click to collapse
Ok so GPS is a no go. Got it
hhairplane said:
Google+ still missing for me here
Click to expand...
Click to collapse
What gapps did you flash?
DeathmonkeyGTX said:
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Click to expand...
Click to collapse
I'll look into root right now. I might have missed something in the bootloader
Good morning everyone! I'm awake and ready to smash bugs!
Hi guys,
I build CM13 for both hammerhead and hammerheadcaf with UBERTC 4.9 for best performance and battery life. It is still a work in progress, but since official nightly are out, I guess it's getting more stable and shouldn't give you to much trouble. Please don't report bugs to Cyanogen since this is an unofficial build, but let me know.
Procedure :
0) Make sure you have bootloader HHZ12k (latest radio is not mandatory but is m8974a-2.0.50.2.27) and you have the proper recovery for hammerhead OR hammerheadcaf
1) Full wipe if coming from other ROM (wipe system, data, cache, dalvik cache). Not necessary if you are already on one of my previous cm13 builds
2) Flash CM13
3) Flash GAPPS
Now works with multirom primary or secondary.
Please provide feedback, and let me know what's broken so I can update the SECOND POST. I'm planning on releasing periodic builds, and I'll try to fix what's not working when possible.
Obviously you'll need a Marshmallow GAPPS package. There are some available around, pick your favorite. I'm suggesting OPENGAPPS, but any good one should work.
Download ROM - AOSP and CAF
Download GAPPS
Please consider a donation if you want to support my efforts !!!
Enjoy !!!
What's broken
You tell me
Interested. Does this work with multirom? And do you have a features/mods list?
Sent from my Nexus 5 using Tapatalk
KiDxNinja said:
Interested. Does this work with multirom? And do you have a features/mods list?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It's pure cm as of now. I haven't added anything else so it's all the basic cm features for now. Some might be missing or broken, as I said it's still in alpha stage.
As for multirom, please try and report. I've never used it so i can't test it. Thanks!
Link ain't working bro
Access denied error with AFH link.
https://www.androidfilehost.com/?fid=24052804347849638 cm 13 download link for Nexus 5
thanks for the updated link...
Has anyone tried this yet?
It didn't worked for me on multirom.
Dark_Eyes_ said:
Hi guys,
I managed to build a working CM13. It is still in an alpha state, and I can't say I thouroughly tested it. I'm sharing it with you all to play with it, but I can't stress this enough : It is highly untested, so don't use it as a daily driver (or do so at your own risks). Also don't report bugs to Cyanogen since this is an unofficial build.
AS OF NOW, BOOT ANIMATION DISSAPEARS, BUT LET IT GO AND IT WILL BOOT UP JUST FINE !!!
If you have problems with fc on first boot, clean flash rom, boot it once, then install gapps. After that you might have to enable permissions for Google play services and other google apps.
Please provide feedback, and let me know what's broken so I can update the OP. I'm planning on releasing periodic builds, and I'll try to fix what's not working when possible.
Obviously you'll need a Marshmallow GAPPS package. There are some available around, pick your favorite. I'm suggesting one for you, but any good one should work.
Download ROM
Download GAPPS Thanks @zephiK for the package!
Please consider a donation if you want to support my efforts !!!
Enjoy !!!
Click to expand...
Click to collapse
i used the version which was compiled on 21102015 as it was on afh :3 now will use this, that version had some minor bugs :3
parag60288 said:
It didn't worked for me on multirom.
Click to expand...
Click to collapse
Kernel must not be patched for it. Does official cm12.1 work with multirom? I guess not but just to make sure. I'll add the patch in next update if need be.
Dark_Eyes_ said:
Kernel must not be patched for it. Does official cm12.1 work with multirom? I guess not but just to make sure. I'll add the patch in next update if need be.
Click to expand...
Click to collapse
Yes.
I am using official CM12.1 as secondary rom on Cataclysm MM+elementalX 6.04 rom.
I tried cm13 as third rom. But sadly it didn't worked.
Can i flash like this:
1. Factory reset
2. Flash CM 13
3. Flash Gapps
4. Flash EX 6.04
5. Flash other zips for permissive
6. Flash modified boot.img from chainfire
ddarshan said:
Can i flash like this:
1. Factory reset
2. Flash CM 13
3. Flash Gapps
4. Flash EX 6.04
5. Flash other zips for permissive
6. Flash modified boot.img from chainfire
Click to expand...
Click to collapse
Well i would suggest flashing just cm13 then gapps first. See if it boots fine and do initial setup. If it fails, wipe system, data, cache and dalvik, install cm13 and boot up. Do initial setup, then flash gapps and boot. At this point if everything is working, back up in twrp and flash EX. No need to flash chainfire boot nor permissive.
don't work for me on multirom also . i instal in first rom temporaly to test .................android is starting xx of 101 wait
ok , installation finish
wifi ok
data ok
ril ok to call but reboot when receive a call .
bluetooth ok
camera ok
camcorder nok
sound nok
after second reboot , wifi data don't work . instal an other kernel to see .
music ok
[/ATTACH][/ATTACH]
the rom is smooth .
ok now wifi data work with an other kernel.
Is it okay for regular use?
philipped346 said:
ok now wifi data work with an other kernel.
Click to expand...
Click to collapse
Do you see the social media live lock screen option? I saw this on one of the video.
Link to video: https://www.youtube.com/watch?v=GEaW3zyvdzc