First flashing steps..specific questions inside. Need help. Thanks - Sony Xperia Z Ultra

Hello!
So here I go...first trying to root so I need to go back to 532 BUT I cant find one for the C6802 and USA. Even the one in the link that says TW is a dead link.
Wondering if flashing the [STOCK ROM] [FTF] Xperia Z Ultra (C6806) 14.1.B.1.532 "US Retail" is a bad idea.
I am sure I will have more Qs after this one but this one already got me stuck right off the bat :crying:
http://forum.xda-developers.com/showthread.php?t=2453921&highlight=c6802
PS I found one for HK C6802_14.1.B.1.532_HK.ftf maybe that works?

Yo!
It doesn't really matter which version you pick. It'll work as usual. And yes, the HK version will work fine, but it might boot up with chinese language. I'm not really sure. Or you can flash the european version for the C6833.

Ok I also downloaded the C6806 US version but I can use that C6833 European version if you think is a better idea.
I think I can try what I have no harm done, then try another one if that one did not work fine. Right?

shaolin95 said:
Ok I also downloaded the C6806 US version but I can use that C6833 European version if you think is a better idea.
I think I can try what I have no harm done, then try another one if that one did not work fine. Right?
Click to expand...
Click to collapse
Yeah, whatever you feel like doing You're only downgrading to root, so after you've changed the CDA and gottten the OTA update, you'll end up with a german firmware (unless you find a different CDA that has OTA). Either way, just do whatever you want. If it doesn't boot or the ROM is wonky, it'll only take you a couple of mintues to flash a different ROM.

Ok so finally ready to try the firmware. I see stuff like Partition, TA etc on the flash tool. I dont see anything instructions to check any of those so I assume I am good to go, right?
Also, when setting the phone in flashmode there is no icon to indicate you are in that mode?
If I understood correctly the whole back up TA thing or you will lose it only happens if I unlock the bootloader so I think I am fine not checking any of those option to exclude but better safe than sorry.

shaolin95 said:
Ok so finally ready to try the firmware. I see stuff like Partition, TA etc on the flash tool. I dont see anything instructions to check any of those so I assume I am good to go, right?
Also, when setting the phone in flashmode there is no icon to indicate you are in that mode?
If I understood correctly the whole back up TA thing or you will lose it only happens if I unlock the bootloader so I think I am fine not checking any of those option to exclude but better safe than sorry.
Click to expand...
Click to collapse
Don't worry about your TA partition unless you're going to unlock the bootloader. It's safe, and flashtool won't and can't delete it. The only options you might be interested in is wiping of data, appdata etc. so untick those if you don't want to delete everything on your phone (but it's brand new, so my guess is that you don't have that much on it right now)
There are no icons or any signs when you're in flash mode. Flashtool will tell you that you're connected through flashmode and that's that

What happens if you lose your TA partition? I never backed it up as I had no root and I did do a bootloader unlock via Sony site.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

LordManhattan said:
Don't worry about your TA partition unless you're going to unlock the bootloader. It's safe, and flashtool won't and can't delete it. The only options you might be interested in is wiping of data, appdata etc. so untick those if you don't want to delete everything on your phone (but it's brand new, so my guess is that you don't have that much on it right now)
There are no icons or any signs when you're in flash mode. Flashtool will tell you that you're connected through flashmode and that's that
Click to expand...
Click to collapse
Thanks. mmm having issues with not installing the drivers.
Gonna try restarting. Still wont install drivers when I tried flashmode...all I see is the S1 Service with the yellow warning icon under Device Manager. Tried with the drivers from the Flashtool folder and nothing. :/

sabre31 said:
What happens if you lose your TA partition? I never backed it up as I had no root and I did do a bootloader unlock via Sony site.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Once you flash a stock ROM again, X-Reality won't work, and that's about it.
shaolin95 said:
Thanks. mmm having issues with not installing the drivers.
Gonna try restarting.
Click to expand...
Click to collapse
Are you running Win7 or Win8? Win8 has some issues with installing drivers if i remember correctly, and you have to disable "something something drivers", or boot up in safe mode or something. I'm not sure as you can clearly tell

Sorry should have said that. Actually is Windows 7 64 bits. tried many usb ports too.
FINALLY! LOL
I was installing the Ultra dirver when I should have been selecting Flashmode and fastboot from the list! LOL
Looks like I got a tool here : http://forum.xda-developers.com/showthread.php?t=1886460

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

And every time I think I am finally on my way, something happens!
My guide is sending me to vroot but that has been taken down so now I am not sure what to use to root :/
This is the guide I was using.
http://forum.xda-developers.com/showthread.php?t=2502185
I saw some Kingo app, maybe I will try that.

Yeah, use Kingo
Sent from my C6833 using Tapatalk

Hey man thanks for being with me through the whole process, appreciated!
I just finished the rooting and didnt have to do the CDA part as I got the OTA 257 upgrade now downloading.
Then I will back up TA and finally time to flash a ROM...now I must decide which one looks good!

shaolin95 said:
Hey man thanks for being with me through the whole process, appreciated!
I just finished the rooting and didnt have to do the CDA part as I got the OTA 257 upgrade now downloading.
Then I will back up TA and finally time to flash a ROM...now I must decide which one looks good!
Click to expand...
Click to collapse
Remember to use OTA Root Keeper before you update to 257.
Sent from my C6833 using Tapatalk

Oh yes, I did the whole guide, Survival mode, OTA keeper and I am on 257 and rooted! Plus just finished the TA back up so only need to unlock bootloader and I am in business!

Nice! To unlock the bootloader, just go to Sony's Dev site and request your unlock keey. Then use flashtool to unlock it. Note that unlocking the bootloader might wipe some stuff (again), and if you can't find the root app when you power it on again, don't freak out
I'm off to bed, so you're on your own now
Sent from my C6833 using Tapatalk

I am dead then! LOL
Just got an error your phone bootloader cannot be officially unlocked even thought the service menu says it can be unlocked.
More fun all night for sure.
Good night!

Ok so I got it unlocked and recovery has been installed. Do I have to now restore the TA? I ask as from I understood, we backed it up because it gets wiped out during the unlock thus logical step would be to restore now.

shaolin95 said:
Ok so I got it unlocked and recovery has been installed. Do I have to now restore the TA? I ask as from I understood, we backed it up because it gets wiped out during the unlock thus logical step would be to restore now.
Click to expand...
Click to collapse
If you restore TA then your bootloader will be automatically locked.

Related

[Q] X10 Bootloader NOT UNLOCKING!

Hi everyone!
Yesterday i decided to start exploring my Xperia X10i and so came across this site, rooted my phone, installed xRecover and tried to unlock the bootloader... BUT it would not work!!! I used the [HOW-TO]UNLOCK bootloader for X10 by 9Lukas5, followed all the steps and it would not work!!
He says you dont need to downgrade, so i was using my 2.3.3 firmware. (downgraded only in flashtool), the semc program just wouldnt finish the job (i checked, i have the semc certificate). It even bricked my phone(stuck on the sony ericcson part) a few times (i managed to revive it). Now i installed the Cyanogen7 mod 003, im wondering if i should try again with the bootloder?
If i have to downgrade to 2.1 please send me a link where i can download the firmware. And its done by the flashtool right? (i got the 0.2.9.1, for some reason the 0.6.7.1 comes up with some error screen when i start it)
Ok, i just downgraded with this file -> Generic version 2.1update1 build 2.1.A.0.435.
Tried to do the bootloader unlock again, thats what comes up (and did on my old 2.3.3):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I unlock the bootloader with the Cyanogenmod as well?
OMFG!!! AFTER CHANGING BACK TO CYANOGEN7 FROM 2.1 I CANT SEND SMS!!!! HELP SOMEONE!!!!
PLZ HELP! Thanks in advance
Are the developers doing anything except developing and talking to each other?? HOW ABOUT HELPING A NOOB?! (me) FML!!! Fixed the sms problem btw with flashing 2.1 again. CMON SOMEONE, HELP!!!!!!
I'm no expert but I will try to help
What error are you getting with the latest flashtool?
Try using the X10_aZuZu_Kernel_Downgrade_Generic firmware.
http://forum.xda-developers.com/showthread.php?t=1254087
BTW for most of the devices, you need to downgrade and be careful on choosing on the .bat file to unlock. also keep the upgrade file ready.
If you have troubles getting the phone into flash mode use this trick
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs.
So quick clicks on the mouse would help you
kylec said:
I'm no expert but I will try to help
What error are you getting with the latest flashtool?
Click to expand...
Click to collapse
The one i downloaded was from here (Windows version 32 bit btw) : [TOOL/X10] [UPDATE 15/01/2012] Flashtool version 0.6.7.0 - Windows / Linux
Wait, i just installed the 0.6.7.0 from http://androxyde.github.com/ And it seems to be working... But this is the installer, the other one was a zip with the files so maybe it has to be installed.
amrth said:
Try using the X10_aZuZu_Kernel_Downgrade_Generic firmware.
http://forum.xda-developers.com/showthread.php?t=1254087
BTW for most of the devices, you need to downgrade and be careful on choosing on the .bat file to unlock. also keep the upgrade file ready.
If you have troubles getting the phone into flash mode use this trick
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs.
So quick clicks on the mouse would help you
Click to expand...
Click to collapse
The flashmode is not a problem atm, but if thats a good tip for the future
I was using the Azuzu downgrade that is included in the 0.2.9.1 flashtool, isnt it the same one? <---- Yes, im 99% sure it is. Same name and weight of the downloaded file as the one included in the firmwares folder. So i have been using it.
OK!! I USED THE [25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
(with the working 0.6.7.0)
And apparently i successfully unlocked the bootloader.
Where it says "S1 ERROM VER", if the code looks like this "r8А033" (the letter "r" is small), then you have successfully unlocked the BL, if its capital letter "R", then repeat the steps for BL unlocking.
Click to expand...
Click to collapse
<--- i get that r8А033
BUT!!! I just installed the [2.3.3+2.3.7+arc][05/02/2012]ThGo2 v14.0 [Bestest] [ICS theme] [with T.E.A.M] AND WHEN THE PHONE LOADS THE FIRST THING THAT POPS UP IS...GUESS WHAT?... SONY ERICCSON!!!! So that meant i havent unlocked it?? Im so confused
OR do i have to install a custom kernel (firmware or watever) before installing any other firmware? Koz I installed the ThGo2 from my generic 2.3.3 (without flashing anything or installing any kernels) that i updated through PC Companion. If i do need to install something, then how? Flashtool? And What? Sorry for being such a Noob guys
So basically what i did was -> Phone is on 2.3.3 -> Root phone with flash tool -> Install Xrecovery -> "Unlock BL" -> Xrecovery, install the ThGo2.
Whats kernel by the way?
And again I am left alone.... SERIOUSLY, WHERE IS EVERYONE THAT CAN HELP? WHAT DID I JOIN THE SITE FOR IF NOONE IS HELPING ME? FMFL.
Hey sorry about late reply.
After unlocking bootoader you will keep seeing SE boot image until you flash custom kernel.
The ROM you want will have the kernel that needs to be flashed via flashtool.
If you download FXP cm7, the kernel ftf is in the flashtool -> firmwares folder. Just drag and drop onto flashtool
Give that a go first and let me know what happens.
Ill try check this more often
Sent from my X10i using XDA App
Ok, thanks man!! Since i decided to go with the ThGo2 (its faster than cyanogen as far as i can see), i have to flash one of his kernels. He got 2 --> X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0 & X10_2.3.3_Th_kernel-n1.1_wifi. I'll try the first one now and report how it goes. Hopefully it works. And i hope my phone doesnt brick either
TeqTronix said:
Ok, thanks man!! Since i decided to go with the ThGo2 (its faster than cyanogen as far as i can see), i have to flash one of his kernels. He got 2 --> X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0 & X10_2.3.3_Th_kernel-n1.1_wifi. I'll try the first one now and report how it goes. Hopefully it works. And i hope my phone doesnt brick either
Click to expand...
Click to collapse
haha no worries. You should be fine so long as you don't pull the battery or cable while you're flashing a new baseband (which you shouldn't have to do unless your running a 2.1 rom )
ThGo2 is a great rom. Have fun
YYYYEEEEESSSSS!!!! IT WORKED!!! FINALLY!!!! DUDE, U R EPIC!!! THANKS HEAPS!!! Time to click the "thanks" button on your post! Now u have 20 So grateful!!
TeqTronix said:
YYYYEEEEESSSSS!!!! IT WORKED!!! FINALLY!!!! DUDE, U R EPIC!!! THANKS HEAPS!!! Time to click the "thanks" button on your post! Now u have 20 So grateful!!
Click to expand...
Click to collapse
Haha no problem glad I was able to help.
Sent from my Acer Iconia A500 using XDA Premium App
kylec said:
Hey sorry about late reply.
After unlocking bootoader you will keep seeing SE boot image until you flash custom kernel.
The ROM you want will have the kernel that needs to be flashed via flashtool.
If you download FXP cm7, the kernel ftf is in the flashtool -> firmwares folder. Just drag and drop onto flashtool
Give that a go first and let me know what happens.
Ill try check this more often
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Hey i think that answers my question but just to clarify: So this is what happened i usred flashtool 0.9.0 to unlock the bootloader so that i can unlock my phone from rogers. Everything went right. Flashtool did its thing completed the bootloader unlock recognized my phone and confirmed unlock with small r using s1 tool. After reeboot two things still happen. First i am still booting through the original se prompt thst oalways had, and two, my phone is still locked to rogers. I am using the standard firmware that came from sony with the 2.3.3 upgrade. So from what i understand from your post all i have to do is use the flashtool and flash my phone with custom firmware to complete the job, and if so which firmware would i use? Thanks
Osirisvii said:
Hey i think that answers my question but just to clarify: So this is what happened i usred flashtool 0.9.0 to unlock the bootloader so that i can unlock my phone from rogers. Everything went right. Flashtool did its thing completed the bootloader unlock recognized my phone and confirmed unlock with small r using s1 tool. After reeboot two things still happen. First i am still booting through the original se prompt thst oalways had, and two, my phone is still locked to rogers. I am using the standard firmware that came from sony with the 2.3.3 upgrade. So from what i understand from your post all i have to do is use the flashtool and flash my phone with custom firmware to complete the job, and if so which firmware would i use? Thanks
Click to expand...
Click to collapse
I think you misunderstood the fact that this is bootloader unlocking not network unlock
So you are still stuck with rogers. There's no free way to network unlock but there are some cheap ones you can find out
Sent from my X10
Guess I did misynderstand it....but i would still like to unlock my bootloader. Do i need a custom flash from flashtool or is there a specific one i need. Also i tried to check how many attempts i got left with the menu back...etc fromthe unlock screen command and its not workung. Is there a reason for this or do i ask that qyestion somewhere else?
Osirisvii said:
Guess I did misynderstand it....but i would still like to unlock my bootloader. Do i need a custom flash from flashtool or is there a specific one i need. Also i tried to check how many attempts i got left with the menu back...etc fromthe unlock screen command and its not workung. Is there a reason for this or do i ask that qyestion somewhere else?
Click to expand...
Click to collapse
You can unlock your bootloader anytime and relock is as many times as you want
That unlocking chances are for network unlock i guess dunno about it much
To unlock your bootloader there's a good guide in development section named G-face guide for flashtool. Search for it. I'm on phone right now can't search
Sent from my X10

I need to get my phone back to normal ASAP!

Ive unlocked the bootloader, rooted my phone and put a custom rom on it.
It needs to go back to the shop as my wife does not want it.
Its got a 28 day money back guarantee and today is the 28th day, so I need to do it ASAP.
I don't need to relock/re root it really, I just need to get a stock ROM on it so it looks normal.
The girl at the shop will only turn it on to check its working, but i fear if she sees the custom boot screen she might think, 'hey this is different to all the others ive seen'.
Ideally I would like to put the original Tesco ROM back onto it
Hmmm thats got me thinking. When Jinx unlocked my bootloader etc, he saved some files on my computer incase i needed a back up.
These are the files I have:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any idea how to get them onto my phone?
Just wotanserver it
Sent from my SK17i using Tapatalk
There's no rescind splash screen on mine just an app
Sent from my SK17i using Tapatalk
serialkillazzs said:
There's no rescind splash screen on mine just an app
Click to expand...
Click to collapse
Im not sure what you're on about fella. Could you elaborate?
I would prefer to use this backup I have rather than use Wotanserver to put a generic rom on it
vinokirk said:
Im not sure what you're on about fella. Could you elaborate?
I would prefer to use this backup I have rather than use Wotanserver to put a generic rom on it
Click to expand...
Click to collapse
This is a nandroid backup made with clockworkmod that means if you flash it back your phone will be in a non-stock rooted state.You can restore it and then check your phone status.If you know how it was rooted, unroot your phone with the same method after you flash this image.
The above files are a backup of the old bootloader not the ROM itself. Does anyone have a Tesco ROM by any chance?
vinokirk said:
The above files are a backup of the old bootloader not the ROM itself. Does anyone have a Tesco ROM by any chance?
Click to expand...
Click to collapse
Not an expert but 350+ mb backup of just a bootloader?I think it's the whole rom.
T3sla said:
Not an expert but 350+ mb backup of just a bootloader?I think it's the whole rom.
Click to expand...
Click to collapse
Well thats what Jinx told me and hes the one that did the procedure.
Ive asked him to look at this thread just to double check.
Tesco rom has no Tesco splash screen only Tesco app and Tesco settings for Internet mms.
Flash. 42 or 58 with wotanserver and then se update service might flash a Tesco rom for ya, as your product code probably still on Tesco UK.
Sent from my SK17i using Tapatalk
Or make an excuse it keeps restarting and you want your money back!
Sent from my SK17i using Tapatalk
serialkillazzs said:
Or make an excuse it keeps restarting and you want your money back!
Sent from my SK17i using Tapatalk
Click to expand...
Click to collapse
This is actually my second one anyway! The first one I broke whilst trying to unlock the bootloader
I tried to recreate what i did but this one just wont break!
So I'm trying to make it look as normal as possible.
I've been looking on Team Da Vinci and they mention the Tesco ROM on their website:
http://davinciteam.co.uk/phone_details_SK17i_4.0.A.2.377_0001,0002,0003,0004.html
But they want £8.75 for the pleasure. The website also doesn't look like it's been updated in a while. I don't wanna give them my money and then find out it won't work. I've used Da Vinci before and it was a pleasant experience, but it was about five years ago.
vinokirk said:
Ideally I would like to put the original Tesco ROM back onto it
Hmmm thats got me thinking. When Jinx unlocked my bootloader etc, he saved some files on my computer incase i needed a back up.
These are the files I have:
Any idea how to get them onto my phone?
Click to expand...
Click to collapse
They are not the files I left.
The files I left are user\SeTool\Backup\%IMEI%\
And in the format %IMEI%%date%.fakesign
And %IMEI%%date%.backup
They are typically 2-4kb in size
I do not know where you got those files from
EDIT...
I may have some credits you can have for them let me see if I can find the ID and password
But not promising
Jinx13
If you wanna flash these files back then with root explorer or astro explorer navigate to /mnt/sdcard.If you see a folder named clockworkmod then go to clockworkmod/backup and make a folder there.Put files inside.Restart in clockworkmod, choose backup and restore, restore and flash the specific backup.If there isn't a folder named clockworkmod then you have to install it first (you must be rooted) and then do the above.
Phone has been taken back to shop now. Refunded all ok
She didnt even look at the phone lol!
Better to be safe than sorry i guess
I used Wotanserver in the end to flash a stock .42 image and left it at that.
Simpuls!
Tesco are a good bunch.
unfortunately they damaged the sim contact on mine when bundling with there Tesco sim before sealing box.
I have to use blue tac to keep pressure and contact on my 3 sim to get service.
Looking forward to ice cream tho face unlock should be fun and hopefully bit quicker.
Skype brill on mini pro love it!
Sent from my SK17i using Tapatalk
vinokirk said:
Phone has been taken back to shop now. Refunded all ok
She didnt even look at the phone lol!
Better to be safe than sorry i guess
I used Wotanserver in the end to flash a stock .42 image and left it at that.
Click to expand...
Click to collapse
Glad you got it sorted
Jinx13

[Tutorial] WotanServer paid? Let´s decrypt Wotan files!

DECRYPT WOTAN FILES​
- Hi folks, here is a simple solution to decrypt wotan files, why we should pay again for a firmware that is already on our pc´s ?
- We can distribute this firmwares betwen us since we all have them!
- This works on any Xperia device!
Lets start
Warning:
a - Im no responsible if this bricks your device.
b- I have bad english, so ive made screencaptures to make this easier for you and me
1) Locate Wotan data folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Go to data/flashes and locate 3 files
Using ubuntu i discovered that those files are compressed
3) Using 7zip (or any compression software) Extract them
4) And voila, we got our files, but they are hidden.
5) Change those files extension to .sin
now they are ready for the bundle creation
6) Open Flashtool ... advanced... bundle creation.
7) Choose the folder where the files are...
8) Pass them to firmware content...
9) in device, version and branding fields put wathever you want, i put my device info, to recognize it later easier and press OK
10) Select your device if flashtool ask
11) Wait untill is finished...
12) The END, we got our FTF file to flash with Flashtool whenever we want and without paid anything!
Cheers!
If this was helpful please press Thanks button
Edit: reuploading the images!
I have downloaded many firmwares, I got 8 files there...and I have no idea which belongs to which one.
Gonna try something.
Someguyfromhell said:
I have downloaded many firmwares, I got 8 files there...and I have no idea which belongs to which one.
Gonna try something.
Click to expand...
Click to collapse
Order them by date
ChavitoArg said:
Order them by date
Click to expand...
Click to collapse
That's the problem.
Already first errors also when trying to extract, couldn't get full package.
Hmm I tried to build an FTF for my Xperia Mini firmware that I previously got off WotanServer, but FlashTool somehow gets "stuck" once it hits adsp.sin (which is like the 1st file it is trying to flash). The phone seems to be rejecting the flash.
My phone's bootloader is not unlocked though. But WotanServer was still able to flash the stock firmware (as it should be) nonetheless.
I'm thinking is it possible that maybe the files are individually encrypted in some way so the phone rejects it or something?
EDIT: Since other users have said it's successful, am I doing something wrong?
Works like a charm!!!!
Awesome, bro. Now All we need is a fully credit loades wootan account. i'm working on it, thanks.
nit3wolf said:
Awesome, bro. Now All we need is a fully credit loades wootan account. i'm working on it, thanks.
Click to expand...
Click to collapse
Press thank button if this was helpful
I'm trying to do as described but I'm having the same problem Kaiyao, the firmware is not sent to the device, stands and does nothing.
Same here, it get stucked in flashing adsp.... will try again
So i tried again several times, and yes it get stuck in that section just like other people say
I have locked bootloader... maybe thats the problem? (and yes with wotan I can flash it with no problem)
By the looks of it, from reading all the posts, if you have a locked bootloader, it is highly unlikely to work. My bootloader is unlocked and it worked perfectly for me
Edit: Nevermind it didn't work, it got stuck like everybody else's and my bootloader is unlocked :S
jacker60 said:
Same here, it get stucked in flashing adsp.... will try again
So i tried again several times, and yes it get stuck in that section just like other people say
I have locked bootloader... maybe thats the problem? (and yes with wotan I can flash it with no problem)
Click to expand...
Click to collapse
The bootloader is not the problem, mine is unlocked and don´t work, the same f.... thing, time time... dont start.
albertomuerto said:
The bootloader is not the problem, mine is unlocked and don´t work, the same f.... thing, time time... dont start.
Click to expand...
Click to collapse
So the problem ins't the bootloader, any other ideas?
I do not think the problem is in bootloader, because other ROMs operate normally.
I think there must be some script inside the files that makes them available as a cache file for wotan client re-flash only
Alright guys, in an attempt to flash my ST15i handset to the generic US ST15a firmware (I was hoping to get my 3G working for Digicel here in the Caribbean but no go, I just know the issue is baseband related but back on track), I bought some credit and downloaded the files. I managed to create a "ST15a_4.0.2.A.0.62_Generic Trade US" firmware. Here's the link http://ul.to/2sz71s80
Did you also try to flash it?To check if it works?
Sent from my ST15i
grigoris_a said:
Did you also try to flash it?To check if it works?
Sent from my ST15i
Click to expand...
Click to collapse
I'll flash it and retry just to make sure it works for you since I already flashed it (from ST15i to ST15a via the wotan server software).
Update: It's stuck at this point...
"16/023/2012 20:23:15 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE / IMEI : ***********
16/023/2012 20:23:15 - INFO - Flashing kernel.sin"
I don't know why...followed the tutorial exactly. Looks like a dud guys, my apologies. Next time I'll test and ensure it works unless someone wants to download and see where it messed up.
PS: Does anyone know if it is possible to get the bands which work for the ST15a working in the ST15i firmware (3G support to be precise)? Do I flash some software or are the bands determined by hardware (e.g. device uses a specific chip)?
Your bootloader is locked, so you can't flash kernels. Exclude it before flashing and flash again.
Sent from my SK17i using xda premium
nit3wolf said:
Your bootloader is locked, so you can't flash kernels. Exclude it before flashing and flash again.
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Thanks nit3wolf, will have to try it tomorrow though, gotta get some sleep before work in the am. By the way, am I excluding the loader or kernel before flashing?

Root Xperia C4/C5 firmware 5.1 LB

sry for my bad English. hope u guys can understand and make your device rooted
I try its on my xperia c4 E5333, and some people try its on their xperia c5 and its works too.
First upgrade your device to android 5.1, dont turn on usb debugging. if its on, turn it off
Second download kingroot from here ( .apk) http://www.kingroot.net and install kingroot. then run
So u your device get root now . So easy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after that, if you want to change kingroot to super su, u can folowing this:
download this file http://forum.xda-developers.com/attachment.php?attachmentid=3333295&d=1432683529 and extract to internal sdcard
install app "Terminal Emulator" from ch play. open it and type "su" for root permission, then type "sh /sdcard/mrw/root.sh", wait...
Reboot your phone, and finaly your phone get root with supersu.
So its a way to root Xperia C4/C5. Can anyone make recovery for C4/C5. Tks alots
It didnt work for E5553 5.1
gsser said:
It didnt work for E5553 5.1
Click to expand...
Click to collapse
did u turn on usb debugging. turn it off and try again
nhkhanh068 said:
did u turn on usb debugging. turn it off and try again
Click to expand...
Click to collapse
I thought you mentioned about apk one lol gonna try desktop version
---------- Post added at 01:18 PM ---------- Previous post was at 12:54 PM ----------
didnt work again...
Edit: worked after some reboot and freeze
gsser said:
It didnt work for E5553 5.1
Click to expand...
Click to collapse
It's Work my E5333 rooted.
I was able to root my E5506 (Wind Mobile) with or without USB debugging on. I tried both ways and it works using the latest Kingroot 4.8 app. It might reboot in the middle of rooting but just continue after the phone reboots. if it fails just try to root it again and it should work after a few tries.
I managed to install Titanium Backup Pro, Busy Box without any issues.
Note: If your Titanium Backup won't allow you to backup in your sd card, just download the app in the play store called SDfix. This app should fix your sd issues in TB. [emoji4]
If you flash a firmware using flashtool you will lose root so you'll have to re-root.
Nice, I'll try to change the root manager to SuperSU. Thanks for the info!
let me know if you manage to make it work. I tried to switch to super su but I keep getting error on su binary when it tries to update
OK Root C4
In my C4 I run until the fifth attempt. Xperia c4 5306
Fine...
After rooting can i use flashify to flash custon recovery? There's a custom recovery for C5 ultra by Bigrammy.
if your bootloader is unlocked you probably can install a custom recovery. my phone's bootloader is still locked just was able to get root access.
xeno.morph said:
if your bootloader is unlocked you probably can install a custom recovery. my phone's bootloader is still locked just was able to get root access.
Click to expand...
Click to collapse
Doesn't biggrammy's custom recovery method address' this fact? It may show as "secure = yes" but recovery can still be flashed.
Quote:
following info from Sony my phone stated “NO” and as you can see the bootloader info said secure = yes but been a I went ahead anyway and here is the weird and lucky for us thing.
After I unlocked it I got (bootloader) secure = NO from fastboot but the System software still reported Bootloader unlock allowed = No
Nothing tripped no warranty warnings nothing it’s like the system never even knew sweet.
Click to expand...
Click to collapse
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521/
Success changing KingRoot to SuperSU!
Just follow the rules precisely as are mentioned in the following post:
http://forum.xda-developers.com/verizon-lg-g3/general/replace-kingroot-superuser-guide-t3251013
Oh yeah! Confirmed Kingroot to SuperSU is a success here too! Thank you pablo_xperia for sharing that link [emoji4]
I don't know why it didn't work for me the first time I rooted my phone but this time definitely worked like a charm.
scotyard said:
Doesn't biggrammy's custom recovery method address' this fact? It may show as "secure = yes" but recovery can still be flashed.
Yes I understand that bigrammy did mention in his thread that some may show "secure=yes" but recovery can still be flashed. I am just worried about mine being a carrier bought phone not being able to flash the fotakernel. I don't want to screw up my phone just yet. Right now i'm fine with being rooted and have superSU installed.
Click to expand...
Click to collapse
kgnexus79 said:
scotyard said:
Doesn't biggrammy's custom recovery method address' this fact? It may show as "secure = yes" but recovery can still be flashed.
Yes I understand that bigrammy did mention in his thread that some may show "secure=yes" but recovery can still be flashed. I am just worried about mine being a carrier bought phone not being able to flash the fotakernel. I don't want to screw up my phone just yet. Right now i'm fine with being rooted and have superSU installed.
Click to expand...
Click to collapse
Oh yeah, forgot about that. You'll have to double check carrier locked phones
Click to expand...
Click to collapse
scotyard said:
kgnexus79 said:
Oh yeah, forgot about that. You'll have to double check carrier locked phones
Click to expand...
Click to collapse
Yup, i know mine is carrier locked because its from Wind Mobile (Canada). I know I can't unlock my bootloader due to this which is unfortunate
Click to expand...
Click to collapse
Is backing up of TA partition working for Xperia C4? Has anyone tried it yet?
kgnexus79 said:
scotyard said:
Yup, i know mine is carrier locked because its from Wind Mobile (Canada). I know I can't unlock my bootloader due to this which is unfortunate
Click to expand...
Click to collapse
Good Luck :good:
Click to expand...
Click to collapse
xeno.morph said:
let me know if you manage to make it work. I tried to switch to super su but I keep getting error on su binary when it tries to update
Click to expand...
Click to collapse
i dont know why. i done without any error
You have to install supersu and terminal. Put wrm dir into phone storage
Follow the commands,
Su
/Sdcard/wrm/root.sh
When it completes, go launch supersu and update binary.
Then reboot

Bootloader Unlocked..I think? (SOLVED)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's a screenshot of what im getting after trying to unlock my rn4 with the unlock tool. What this mean? My bootloader unlocked already?
cant boot to recovery i can only see phone and connector icon..
Edit: I realize my bootloader is already unlocked and the thing missing is stock recovery. I installed TWRP and installed xiaomi.eu latest build.
Cheers
mcneil20 said:
Here's a screenshot of what im getting after trying to unlock my rn4 with the unlock tool. What this mean? My bootloader unlocked already?
cant boot to recovery i can only see phone and connector icon..
Cheers
Click to expand...
Click to collapse
What rom do you currently have installed? You must flash the china dev/beta rom, then make sure to enable the OEM unlock option. You then need to boot into fastboot, you should see the fastboot screen as on the phone in the vid below.
https://youtu.be/E-bWR-8EEYU?t=53
You can also log onto the i.mi.com site and log into your mi account and try to locate your device as in the video below.
https://youtu.be/SPyeQjbmQu8?t=55
gsmyth said:
What rom do you currently have installed? You must flash the china dev/beta rom, then make sure to enable the OEM unlock option. You then need to boot into fastboot, you should see the fastboot screen as on the phone in the vid below.
https://youtu.be/E-bWR-8EEYU?t=53
You can also log onto the i.mi.com site and log into your mi account and try to locate your device as in the video below.
https://youtu.be/SPyeQjbmQu8?t=55
Click to expand...
Click to collapse
Then i realize i need to be on china rom before unlocking is done.. *!^#&^&#$&(**$
Edit: Ill flash latest china dev later and hopefully later ill finish my 40gb backup -_-
mcneil20 said:
Then i realize i need to be on china rom before unlocking is done.. *!^#&^&#$&(**$
Edit: Ill flash latest china dev later and hopefully later ill finish my 40gb backup -_-
Click to expand...
Click to collapse
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
gsmyth said:
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
Click to expand...
Click to collapse
Helpful indeed! Thanks mate for the hand. Really appreciate it. Coming from S3 to RN4 is a bit hard as i dont get this problems xD
gsmyth said:
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
Click to expand...
Click to collapse
Yep exactly what he said, btw the Mi Mover app (available from Play Store & install on both devices) works both ways so old phone - new phone & vice versa so you can use that or the MIUI backup.
http://forum.xda-developers.com/redmi-note-4/how-to/creating-backup-using-inbuilt-miui-t3512380
Either way you need to do it achieves the same thing.
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
Yep exactly what he said, btw the Mi Mover app (available from Play Store & install on both devices) works both ways so old phone - new phone & vice versa so you can use that or the MIUI backup.
http://forum.xda-developers.com/redmi-note-4/how-to/creating-backup-using-inbuilt-miui-t3512380
Either way you need to do it achieves the same thing.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Will update tomorrow and hopefully i finally get what i want xD Currently downloading the tgz file @400-900kbps -_-
UPDATE: I've successfully installed TWRP, SuperSU and Latest build by XIOMI.eu. I'm reinstalling backup and so far my verdict is great! Ram consumption decrease and its more faster than before i think I'll try to install Xposed later this day..
mcneil20 said:
UPDATE: I've successfully installed TWRP, SuperSU and Latest build by XIOMI.eu. I'm reinstalling backup and so far my verdict is great! Ram consumption decrease and its more faster than before i think I'll try to install Xposed later this day..
Click to expand...
Click to collapse
Nice one, glad to hear you got sorted! :good:
I had the same issue. Got to know that it was already unlocked by default (how come?)
The best place tout have latest rom/version of any xiaomi devices global/China developer/stable ?

Categories

Resources